slow and timeout error

Similar Questions

• ReadyNAS Duo copy is slow and gives error 0x8007003B

  I can not copy or use my ReadyNAS duo when you are connected to our router - it is incredibly slow (10 KB) in the best of times and just most of the time-error.

  If I disconnect the router it works perfectly - but no Internet...

  I checked the MTU size and piniging packages etc. and which seems fine, the frames are disabled on my computer.

  How can I go on troubleshooting routers/switches?

  Current configuration is border-> switch TP - Link router-> switch netgear that will both my computer and the ReadyNAS (it was originally setup without the switch netgear with the same problem).

  Thanks for your help, I solved the problem though.

  It was a problem of network on my computer driver and the NAS server has started working after uninstalling and reinstalling.

• Cisco WAPP551 cannot reset and timeout error

  I try to go to a WAP551 of Cisco, but gives an error: "the server to 192.168.1.245 takes too long to respond." We have reset it but the problem persists.

  We have 2 WAP551 of Cisco and both have the same problem.

  We are unable to access the configuration.

  * The power supply light is still flashing. Is it normal?

  Hello

  I am happy that it worked.

  In regards to DHCP, the AP is able to pass DHCP from a DHCP server on the network, but the AP itself does not include DHCP.

  You will need to configure a DHCP server in the same network and subnet, then it wil work.

• How can I use it to avoid the slowness and the error.and more I do not happen to my android?

  Be descriptive saying "playing a video is always rough.

  What device?

• Windows 7 my the media game is slow and still the error who say it has stopped working

  Original title: help me please

  my set of media is slow and still has the error who say that it has stopped working

  Hello

  1. What is the accurate and complete error message you get?
  2. don't you make changes to the computer before the show?

  Method 1
  I suggest you to perform the following troubleshooters.

  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Open the troubleshooter in the Windows Media Player library
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Method 2
  If the problem persists, disable and enable Windows Media Player
  
  Step 1: disable Windows Media Player
  a. Click Start, type optional features and press ENTER.
  b. in the list of objects, expand multimedia functions.
  c. uncheck Windows Media Player and click ok.
  d. restart the computer so that the changes take effect.

  
  Step 2: allow Windows Media Player
  a. Click Start, type optional features and press ENTER.
  b. in the list of objects, expand multimedia functions.
  c. place a check on Windows Media Player, and then click ok.
  d. restart the computer so that the changes take effect.
  e. check if the problem persists.

  See Or turn off Windows features turn on

• big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work

  big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work with my beloved Photoshop!

  Yosemite upgrade very often damage existing Photoshop.  I thank Apple for that.

  You must uninstall and reinstall Photoshop, then apply all the updates of Photoshop from scratch.

  But first, give us details about your configuration:

  STANDARD TEXT:

  Note that it is standard text.

  If you give complete and detailed information on your configuration and the issue,

  as your platform (Mac or Win),.

  accurate versions of your operating system, Photoshop (not just "CS6", but something like CS6v.13.0.6) and the bridge.

  your settings in Photoshop > Preferences > performance

  the type of file you were working.

  specifications of the machine, such as total installed RAM, scratch file HDs, total available disk space, video card specifications, including total VRAM installed.

  What troubleshooting steps you have taken so far

  what you receive, error messages

  If problems of opening raw files also the exact camera brand and model that generated

  If you experience problems printing, specify the exact brand and model of your printer, the size of the paper, the dimensions of the image in pixels (so many pixels wide by pixels high). If going through a TEAR, specify that too.

  A capture of your settings, or the screen image could be very useful also,

  etc.,.

  someone may be able to help you (not necessarily this poster, which is not a Windows user).

  Read this FAQ to get advice on how to ask your questions correctly to get faster and better answers:

  http://forums.Adobe.com/thread/419981?TSTART=0

  Thank you!

• TB, slow and not meet with 'The Script is not responding' mailWindow.js CAUSE: McAfee (new)

  I have been using TB and its predecessor Eudora for years without any problem. These last few months I met it is very slow and usually "does not" clicking on something before the end of the thought. At this point I sometimes get an error message "chrome://messenger/content/mailWindow.js:180", saying that the script has stopped working. I click on continue and it resumes.

  After reading the various posts on the topic several times I did 1) re-indexed 2) made a clean installation 3) disabled modules 4) run in safe mode. Nothing seems to improve things. typical symptoms are:
  A. Download emails seems to take normal time, but their display in the Inbox can take a minute or more (used to be instantaneous) by clicking in the intermediate product, the message "not responding".
  B. Sending messages seems normal
  C. selection of a mail in the Inbox, or try to move or delete one takes a minute or more. Click on in the meantime generates the message "not responding".
  D. generally every action with the mouse has this long accompanied "not responding".

  I use Windows Vista, McAfee is installed but disabled does not make a difference.

  https://wiki.Mozilla.org/Thunderbird: test: Antivirus_Related_Performance_Issues #McAfee

  If you're having trouble following the instructions please contact McAfee support.

• Thunderbird is slow and unresponsive

  Thunderbird is slow and unresponsive. It takes about 2 minutes for the email to be delivered, then another 1 or 2 minutes to open emails once they come in. How solve this problem and get the software working correctly? I use a 64-bit system with a lot of treatment, ram and video card in high quality. The problem seems to have started when I deleted my registry errors.

  https://wiki.Mozilla.org/Thunderbird: test: Antivirus_Related_Performance_Issues #McAfee

• HP monthly Diagnostic Tool - Runs slow and eventually hold endless.

  The Daiagnostic HP of end of month on a HE - 210Y Pavilion 64 bit Win7 works extremely slow and finally stops at the end of 63%.  No other programs are running.  Had to cancel because of the stall.  No test failure wasn't indication for the part that ended.  This is the second consecutive month that has happened.  Prior months - the test ran successfully and quickly.  What is the solution?

  30/04/14 - the monthly diagnostic completed without error, test and it was completed in maybe an hour of time.  I did not observe the process - the computer was ON and I completely forgot the test of end of month.  When I came back, he had successfully completed in maybe an hour or two.  This is in contrast to the experience last month when he never completed and finally stalled after several hours.  (The computer worked very well except for a few issues download in Google Chrome using Realplayer).

  So, what has been fixed in the meantime?  Unknown, expect that Kaspersky Anti-virus I have lead me to leave 'fix' a 'threat '.  I admitted to its process.  The Feast was due to "Quicktime", and it has been deleted.

  Also, I did remove 'Intermediate' which was marked with another download and replace the search Google by Bing - udesired by me.  I must be more careful with downloads.

  For now - the problem of diagnosis of end of month slow / stalled has been fixed somewhat.

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• MacBook Pro running slow and crash

  Hi, I was faced with a slow MacBook Pro two years ago. It was incredible for the first year and I've been making sure to not save files too heavy on that and have only a handful of applications.

  I've just cleaned new (I checked through almost all alone on my files for what I could get rid of) and it of still slow and crashes regularly. It also takes forever to connect. I recently encrypted disc, which seems to have made it is still slower. I use it to edit video and design, but they make crash all the time. He also says that I have 250 GB in apps (that is what takes up the majority of storage), while I only did less 50 GB.

  I back upwards on the time Machine and I was wondering if I should wipe and reinstall, but I fear that the encryption could cause me to lose access to the files, and I don't know if I can simply restore my back upwards or if I should reinstall everything manually. Any advice would be welcome! Thank you

  What exactly happens when it crashes? Is there an error message?

• VISA read timeout error - Keithley 2400

  I am using LabView 2010 to control a Keithley 2400 Sourcemeter on an RS-232 Interface. I want to set up a measure and take a reading (e.g. ground voltage / time)

  I took an example of "Keithley ReadOnly" library code, but the 1073807346 error to retrieve box "initialize". Then I looked in 'Initialize. VI"and found there is a VISA (timeout error?) reading error. I have attached two screenshots that shows errors. Can someone tell me how to solve the problem? Moreover, I am very new to labview, if someone could suggest a solution that is not too 'Advanced '? Thank you very much.

  
  

• VISA READ timeout error - several GPIB resources

  Hello

  I'm working on a network 3 GPIB instruments (Optical Attenuator, amplifier in fiber, spectrum analyser), controlled using VISA sessions in Labview. When it is run separately, the three corresponding screws (which are located in three different Labview projects) works as expected. However, when they ran at the same time, one gives them timeout-1073807339 VISA READ errors. These errors seem to occur when another instrument is sending / receiving data / instructions at the same time that she is.

  The exact context of the error is either:

  -an another VI is running, which includes sending several requests and responses every 100 ms, reading

  -by failing VI starts, I get an error of waiting time among the first Subvi containing a VISA READ operation to perform (sometimes initialize.vi (in situation 1), sometimes one of the subVIs connected the rest State (State 0) on the time-out of the structure of the event).

  or:

  -the default VI is running,

  -by starting another VI, which includes repeatedly sending requests and reading the responses, the failing VI up a mistake among the first Subvi containing a VISA READ operation to run (one of the subVIs linked the State of rest (0) on the time-out of the structure of the event).

  What I tried:

  -gradually increasing the delay between the VISA WRITE and READ operations to the relevant instrument (from 10 ms to 10 s), without success. More surprising are my observations which, by operating this single VI, increasing WRITE it / READ delay results in the same timeout errors. I have found no mention of such behavior through research google and forum. I hope that this may point to a solution to the main issue,

  -switching between synchronous and asynchronous VISA WRITE / READ operations.

  -reorganization of the network GPIB to a star to a linear topology topology (three instruments have different GPIB addresses in case anyone is wondering).

  My thoughts:

  It seems to me that the error is related to a delay introduced between a VISA request and its read operation by the transmission of another query associated another instrument in the same network GPIB. But I have no idea why pass a query to another instrument would introduce such a delay, or why this delay would result in a timeout error (and only an instrument, while writing / reading in each pilot screws are basically the same). Hopefully a more experienced Labview-er will be able to shed some light on my problem.

  Included is the project that contains the default VI (main.vi) and the driver custom made use of.

  There are a number of ways. If you want to keep separate projects for instruments, you can use semaphores often slandered around calls for screws in each project. Locking is not expected or predictable, but it would give controlled access to the GPIB resource.

• I need to update and get error code80072EFE

  Please advice what to do like pc runs very slow and have to restart several times a day because of the above error

  Please advice what to do like pc runs very slow and have to restart several times a day because of the above error

  Hey josief

  Download update and scan with the free version of malwarebytes anti-malware in safe mode with networking

  http://www.Malwarebytes.org/MBAM.php

  You can also in safe mode with network download and run rkill to stop the problem before you download and scan with malwarebytes process

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that didn't he corrects not reposting in the windows update forum

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Internet Explorer 7 is slow and stalls.

  Original title: a i e 7 speed is slow and stalls on. occasion.__two of problems with yahoo pinochle lately.once in living room 2 or any other, table does not load unless I put table on the small table. another it just happens

  Puter speed a problem, do not know what to eliminate programs that were self installed.

  in the games, I have problems with pinoclhle.  no problem getting lounging.

  Once in the living room, and select table, table will not load, after a few trys, with error mess. I kill and click options, click on small table and it will go immediately.

  Hello
   
  a. Summers - play you this game online or have you downloaded and installed?
  b. whose exploitation is installed on your computer?
  (c) what programs have been installed in the car? and how to get installed automatically?
   
  Method 1.
  No matter how fast your Internet connection, there are moments where things will slow down to a crawl. This desire to article help sort out you what kinds of things can go wrong, learn what you can do about them and discover how to make the most of your Internet connection.
  Why is my Internet connection so slow?
  http://Windows.Microsoft.com/en-us/Windows-Vista/why-is-my-Internet-connection-so-slow
  
  Method 2.
  This game requires java and adobe flashplayer to play.
  See the link below the site of Yahoo Answers:
  Why yahoo pinochle games load used?
  http://answers.Yahoo.com/question/index?QID=20100428075841AABLl2M
  
  Method 3.
  I would also recommend to optimize internet explore as it stalls again.
  
  For more information see the link below and follow the steps below for Internet Explorer 7:
  How to optimize Internet Explorer
  http://support.Microsoft.com/kb/936213
   
  How to play Pinochle
  http://games.Yahoo.com/help/PI
  For additional help, you can also check at Yahoo Answers.
  http://answers.Yahoo.com/
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.