Motorola Photon initialize time more than 7 minutes

Similar Questions

• How to activate my MSF program for I could use more than 30 minutes at a time

  I had to uninstall my Microsoft Flight Simulator X and MSF - program of acceleration of my PC and reinstall them.  I did it.  When I installed FSX-Deluxe edition, the program asked me the activation number, I gave and then reinstalled the acceleration program. He asked for all the numbers, but now when I run the program, it suits me after 30 minutes then and asks for the active program.  I tried to use the Enternet and everything, but I can't well any place where I can activate this program.  I even call your hotline, they were of no help at all.  First I did not understand that you are Tech. He talked so fast and has no sense at all.  My question is: How can I activate the program? without going to halfway around the world to do. I never had this problem in the past, why now?

  Chuck Baumgartner

  Hello

  I suggest you to follow the steps mentioned in the article below and let us know if the problem is solved or not.

  How to activate my MSF program for I could use more than 30 minutes at a time

  http://support.Microsoft.com/kb/925723

  Also check the links below.

  Frequently asked questions on how to enable Microsoft Games for Windows, streets and trips and Mappoint

  http://support.Microsoft.com/kb/927007

  Microsoft Flight Simulator X Service Pack 2 Readme

  http://www.Microsoft.com/products/games/FSInsider/downloads/pages/SP2-en-Readme.aspx

• opening of session takes more than one minute (win vista)

  Hi, I have vista premium 32 bit version with 4 GB of ram and 2 x cpu 2.00 GHz each I have no problem with the hardware and all drivers are up to date and my whole system I revised myself, but I can't work out just why he is more than a minute at the start screen of vista with the scrolling green bar? Now I don't know what im doing with my system, but im either missing something or there is a more serious problem. I just found a solution that gets rid of the problem but he always comes back.  the solution that I found was if I reset my read-ahead using a piece of software called tweakVI my computer starts perfect as it was just installed fresh lol. BUT after I rebooted to new that dates back to more than a minute to boot.

  
  
  I used boot procmon log too, and I got 1 thing that takes a lot of time at startup, close to 80 seconds. Svchost.exe notifychangedirectory path: c:\windows\tasks and the result is success there is 4 wires still taking 80secs and a little more ideas what can I do with this?
  
  
  I also tried other things like (clean boot) disable all non-microsoft services and which does not address the cause, as well as audit service task scheduler to see if he was on a departure delayed but it is set to automatic.

  I doubt that it was a Windows Update.  Simply charge things.

  Frankly - until the boot time go beyond 3 minutes on a modern machine, I think very little of him.  At initialization time means very little compared to how it runs once it is up.

  I systems I demarrer start from SSD, installs own, etc.  With the things that start (antivirus, antimalware, various services for wireless and wired networks, firewall, etc.) sometimes it can take more than a minute--sometimes two.  Generally not - your stay below / 1 minute.

  What is your exact (of cold/off voltage) (three trials minimum) start?

  What a warm reboot (choose to reboot and when the powers of the screen wide going / empty to start loading, start time)?

  Use "AutoRuns" to see what everything starts up.

  "Process Explorer" allows you to really dig into what is currently running.

• Thunderbird may take more than a minute to open, how to fix this?

  Sometimes the thunderbird program may take more than a minute to open, sometimes it only takes 20 seconds. How long this program normally does open?
  What can I do to speed up this process?

  To diagnose problems with Thunderbird, try one of the following:

  • Restart Thunderbird with disabled modules (Thunderbird Safe Mode). On the Help menu, click "restart with disabled modules. If Thunderbird works as usual, there is an add-on or theme interfere with normal operations. You will need to reactivate the modules one at a time until you locate the offender.
  • Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.

• MacBook pro takes more than a minute to start

  My Macbook Pro takes more than a minute to start. I though it was normal, but I've seen Macbook Pro my friend and it only takes 15 seconds to start. How to improve the startup time of my Macbook?

  Replace HDD SSD may speed up OS boot as well as launch Applications.

• Activation of Thunderbird requires more than TWO minutes after clicking on icon Thunderbird.

  PROBLEM: The Thunderbird program is slow to activate. When you click the Thunderbird icon, I expect Thunderbird Inbox screen to appear in a few seconds. However, after clicking on the Thunderbird icon, more than TWO minutes elapse before the Thunderbird screen appears. This problem existed for about a week. My OS is Ms 8.1. You can provide any help would be appreciated. Also, when this problem started, I received the following message "warning: this file is being processed.» Please wait until processing is complete, to pass messages. »

  Your anti virus (or attempt to Microsofts Defender grant) needs to be said is not to analyze the profile of Thunderbird folders, each time you open the program is my guess. The program cannot open files that are locked for scanning. As some of the files may be in the order of 4Gbv in size, it can take an AV program up to 10 minutes.

• After updating to the latest version of Itunes, it works really slow, takes more than a minute to recognize my Iphone and will not correctly backup my Iphone

  IPhone 6 64 IOS 9.3.1 runs the latest version of ITunes 12.3.3.17

  After I updated to the latest version of ITunes, when I run the synchronization, it goes through the six steps, and then returns the message that the backup has failed

  Running on a 64-bit Windows 8.1 Dell computer.

  ITunes now works much more slowly. Takes a long time to load. It takes more than a minute after I plug in my Iphone for the IPhone to be recognized by Itunes.

  I rebooted the machine. Remove the locked file. All have failed to solve the problem

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  If you have tried the suggestions above without success, then another option is to go back to the previous version of iTunes that has worked for you. See the roll back tips to installers of iTunes. Roll back of 12.3.3 will be to restore the pre-upgrade library in the previous iTunes libraries folder.

  TT2

• Updated 2011 MacBook Pro at El Capitan 10.11.4. At the opening of the Photos, he entered into mode 'Library Preparation', but was stuck at 50% complete for more than 30 minutes. What should I do?

  Updated 2011 MacBook Pro at El Capitan 10.11.4. At the opening of the Photos, he entered into mode 'Library Preparation', but was stuck at 50% complete for more than 30 minutes. What should I do?

  Give it time - it may take a few hours depending on the size of your library is

  LN

• Qosmio G30 - 163 - cold start takes more than 5 minutes

  Recently my Toshiba Qosmio G30 - 163 aged only 4 months takes a boot cold (from Qosmio Logo) 5-10 minutes of connection Windows users... I already used the disk recovery and reformatted the second drive, remove any software, but there are still more than 5 minutes at startup. Can anyone help?

  It's nice that you have installed OS again, but we don t know what applications do you use for you personal configuration. Is your laptop connected to the local network in the business or you use at home only?

  Here in the forum, it is not easy to say something concrete, because nobody knows how you have configured your Qosmio. Of my friends a Qosmio G30 and start taking some time but not so long.

• Number of records between two dates which lasted more than a minute

  I need to count the number of events/records in a single table with the dates of appointment and for how long the appointments in another table, I have two cells to hold dated (start and end dates) give a range. I want to count the number of appointments that lasted more than a minute falling into the test range.

  I am sure that this is COUNTIFS and I tried to make it work.

  Hope you can help.

  Thank you

  You could do something like that

  

  The data table on the left and are named "Data."

  Data in the table on the right.  Enter the Start Date, end Date and time Min.

  D2 = COUNTIF (Data::B, "> =" & C2, Data::A, "> =" & A2, Data::A,")<>

  It's abbreviation dethrone select cell D2, and then type (or Coptic and paste here) the formula:

  = COUNTIFS(Data::B, ">="&C2, Data::A, ">="&A2, Data::A, ")<>

• Can't scan at all &amp; printer freezes my laptop is turned on more than 3 minutes?

  Can't get my Laserjet M1212nf MFP to scan anything at all, it freezes as my laptop, if it's on more than 3 minutes.  I connected via the USB cable to my laptop Dell under Windows XP SP2.  I tried to run the diagnostic tool, but it freezes and then gives me the same error message as the printer when I try to scan something.  The error message "sorry, but scan software needs to close." I also deleted the drivers and reinstalled times since the original CD & download from HP.com whenever it froze just my laptop once the drivers have been installed. I don't know what else to try?

  I know that it isn't a hardware problem, because the copy of the printer function works very well!  The scan bar is fail & before he come to scan and then send the data from my laptop.  So my guess is it's a software problem, but I'm not an expert?

  It has been so for about 6 mos now and I'm just trying to not use it much, but it's starting to annoy me that I spent so much on something that I can't use!  Can someone please help me with this?  Thank you!!!

  Wtdboss, sorry for not responding sooner, I was out of the country on a trip to visit his family in France.

  Looks like we can fix pretty easily. To be able to scan from your computer directly on your computer you need to activate the scan function in the software for your printer on your computer. This should be under Scanner or scanner Actions. This will give you your printer permission to access your hard disk computers and record the material there.

  I hope this solves this problem for you!

  -Spencer

  PS Hope you have a wonderful day and that your time is as beautiful as she is here!

• Why do my Predator G3-605-UR20 more than a minute for starting.

  When I do a cold boot, it takes more than a minute, sometimes 5 minutes to start. During this time there is no activity on the LEDs on the top of the computer. Normally I put the computer in hibernation. It only take a few seconds to start. It seems that the post test blocks looking for material. The hardware is the same, as it came from the factory.

  I unplugged the DVD player and the machine seems to start fine now. Replace the DVD drive. Thanks for the help

• When I click on close downcomputer the hourglass appears on the desktop for more than a minute before the closing down of the icon is displayed

  When I try to shut down my computer, I click on start > click on computer of closing and the hourglass appears on the Bureau for more than a minute, when the close icon appearsand I click on it, it takes about 2 minutes to turn off actually. Any suggestions

  We need more information!

  Borrowing another post by ElderL (the same "JoseIbarra' that Elizabeth23 already mentioned):
  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your Internet browser and version?

  Do you have the Windows Desktop Search installed issue?

  Your system's disks IDE or SATA drives?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  What do you see (exactly) that you don't think you should see, and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

  ___________________________________________________________

  Once you answer these questions to the best of your ability, a lot of people here (don't forget that almost all of us are volunteers who are also using Windows XP) will probably be able to help quickly resolve your problem.
  That (ElderL also) might help, too (because its results will contain many answers to the above questions):
  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  For video device and driver information, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

• Put into service takes more than 15 minutes. Stop is worse. It hangs at "closing Windows" regardless of the programs that I run is extremely slowly.

  Original title: start & close problem. Slow response

  My PC is running Window XP SP2. I did all the updates.

  Recently commissioning takes more than 15 minutes. Stop is worse. It hangs at the "closing Windows.
  Whatever programs that I run is extremely slow.
  I ran virus scan, microsoft fixed, but the problem persists.

  Well, I think you don't like it, but the first thing to do is to eliminate by using their special tools Norton Uninstall program:

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?LG=English&CT=United+States&docid=20080710133834EN&product=home&version=1&PVID=f-home

  Now, you might think I be without protection and get some bad things on my computer, but you just want to see how things are going without it.  Just don't visit WWW stupid or silly sites, where you can pick up some virus or malware and you can always install a new copy, but I think it's a big headache for you now.

  It might be out of date, too many options of protection installed, etc.  More protection is not always better, and you will pay for it in the performance of the system with the more stuff you add.

  Then when Norton is gone, proceed as follows:

  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Consider instead of Microsoft Security Essentials or Norton - he did a good job.

  We must eliminate what can cause problems, so I'd start with Norton.  You can put it back later if you want, but you need to see how things are going without it.  Moving things to a good operating system that you are happy with first.

  Eliminate potential problems one at a time and test thing out... one thing at a time.

  Symantec/Norton is you biggest problem right now.

  Check your NVIDIA drivers:

  I use the NVIDIA site and let scan them online take a look at your video system and see what he suggests for drivers and consider their analysis if they offer a new driver.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the address of the NVIDIA page:
  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the DRIVERS GRAPHICS button to start scan and answered in the affirmative, if asked to install the plugin required to run the NVIDIA scan.

  Get rid of Norton.

• When you publish something more than 2 minutes on windows movie maker (now), it freezes at 70 percent and do not finalize, how to fix this?

  I don't know how I got two programs, (Director) (direct Director) on my pc a vista? but nonetheless (movie maker) is the program that I use. but now that I said... Can I publish and audio/video content more than a minute or two of time!  can someone help me? Thank you..

  I don't know how I got two programs, (Director) (direct Director) on my pc a vista? but nonetheless (movie maker) is the program that I use. but now that I said... Can I publish and audio/video content more than a minute or two of time!  can someone help me? Thank you..

  ============================================
  Vista Movie Maker 6 came with your Vista operating system
  and IMHO the best of both programs. Windows Live
  Movie Maker was included when you downloaded and installed
  Windows Live Essentials.

  The publication (economy) questions are probably caused by
  files corrupted or incompatible source (photos, video clips,
  audio clips).

  Several formats are apparently compatible with Movie Maker but
  the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  But... first... If you are running Movie Maker 6... try to go to... Tools /.
  Options / Compatibility tab and uncheck the box 'all' filters / OK now...
  try posting once more.