Mountain lion in El Capitan upgrade - problem with lack of image file.

Similar Questions

• Problem with 16 its image files

  Hello everyone,

  I am currently working with 16-bit images and found vision does not support 16-bit images and I converts images in 64RGB. I converted the 64RGB images, but as my computer screen is 8 bits so I don't see a black picture no picture inside. I am currently working with 16-bit images. Is there a way that can allow me to work on 16-bit images, or only support 8-bit vision. Thank you

  Kind regards

  Lazer

  Hi Lazer,

  Thank you for posting. Please take a look at the following example, which stood on the community of NOR, which treats the display to 16 bit images on a screen of 8 bits.

  "16-bit Image Mapping for Image display on the front of programmatically set.

• I currently have an iMac 27 ", end of 2012 running OSX 10.8.5 Mountain Lion.  Can I upgrade directly to El Captain OSX 10.11.2 without going through any other upgrade using the free update available on my update page?  T

  I currently have an iMac 27 ", end of 2012 running OSX 10.8.5 Mountain Lion.  Can I upgrade directly to El Captain OSX 10.11.2 without going through any other upgrade using the free update available on my update page?  Thank you

  Yes.

  (137273)

• a problem with one of the files in the TestStand\AdapterSupport\LabVIEW directory

  When looking at the module a LabVIEW VI called for TestStand, I get the following message:

  A problem with one of the files in the TestStand\AdapterSupport\LabVIEW directory.  Please reinstall or repair.

  I made the mistake of cleaning C: in my computer.  Clean the C:\National Instruments downloads

  Why would someone put bits of applications or modules, etc. in such a directory?

  I'm not too crazy about restoring 11FR in this folder.  It's just crazy!

  If anyone has encountered this before?  No "easy"? outside re - install TS...

  Side note: I do not touch anything in the \Program files. National Instruments\TestStand\AdapterSupport\LabVIEW

  What version of LabVIEW and TestStand do you use?

  In 2012, TestStand, this directory is mapped to:

  C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 2012\AdapterSupport\LabVIEW

  Have you tried mass compiling the screws in this folder?

  I had to create a new 'TestStand - default values XX.llb"file, where XX is the last version of LabVIEW you use, but I have not seen this message before.

  Good luck

  PH

• Problem with the transfer of files from the computer Windows XP to Windows 7 using Windows Easy Transfer.

  Original title: Put WET on the old computer

  When I try to use WET to transfer from old Win XP Win 7 again, I need trasfer WET to the old computer.  So I choose this option and move on to the part where it says "Select the USB flash drive where you want to save WET".  Well, in the window is the word "computer" I can't click on it, nor is the OK button light up.  What's wrong?

  Hello

  Thanks for posting in Microsoft Community!

  It seems that you have a problem with the transfer of files from the computer Windows XP to Windows 7 using Windows Easy Transfer.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  I suggest you try the procedure described in the link and check if it helps.

  Transferring files and settings: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/transferring-files-and-settings-frequently-asked-questions

  For more information, please see the links.

  Transfer files and settings from another computer
  http://Windows.Microsoft.com/en-in/Windows7/transfer-files-and-settings-from-another-computer

  Windows Easy transfer

  http://Windows.Microsoft.com/en-in/Windows7/transfer-files-and-settings-from-another-computer

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Problems with the published html file

  Hi, I am a beginner using Adobe animate. I managed to do design an interactive infographic to incorporate into a Web site. But I have a problem with the published html file. The html file is generated, but when I click it, only a blank page opens on my internet browser. As far as I understand it, computer graphics itself should open in the browser. Can someone please advise what I could do wrong?

  Thanks a lot for your help!

  Perhaps a blank screen when the animation is published.

• Strange problem with export to jpg files

  I'm having a strange problem with exporting my vector files to jpg.  When I export the file as a .jpg file, then open it some text or shapes (such as rectangles or squares) have disappeared.  When I go back and open the file .ai the stuff is there, but he just went on the jpg.  If I open the .ai file in Photoshop it's gone too.  I have to save the file in pdf format, then open the PDF in Photoshop and export in a file .jpg away.  It's very strange.  If I go into the Illustrator file and re - type the text disapers, it usually fixes the problem.  I'm not an expert with Illustrator, then I can do something wrong, if anyone can help please let me know, thanks! (I have CS3)

  Things that are disppearing are defined for a recovery? Look in Control Panel attributes with objects selected and see if all the overprints are defined.

• cannot update, uninstall or new installation of itunes and the programs associated with lack of msi files

  cannot update, uninstall or new installation of itunes and the programs associated with lack of msi files

  Hi kenau78,

  a. this problem during installation?

  b. you install an iTunes 32-bit version or 64-bit?

  c. What is the CPU architecture, 32-bit or 64-bit?

  I suggest you to contact the Apple support also, because the problem is with iTunes, from the link given below.

  http://www.Apple.com/support/

  You can also ask your question in the discussion forums Apple from the link below.

  http://discussions.Apple.com

  Concerning

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• After the upgrade to El Capitan having problems with the application Mail

  Hello:

  Recently upgraded my Mac mini to El Capitan. Before the upgrade (from Mountain Lion), I got Thunderbird mail application works perfectly access my GMail account and my Hotmail account. Now, I have no problem with Hotmail and Gmail keeps asking for the password to connect to the gmail imap server. I have TBird in my laptop Ubuntu Linux and Windows too and that you have not had any problems like that. Any help to solve this problem is appreciated. Thank you.

  Try this: https://support.google.com/accounts/troubleshooter/3178296?hl=en

• GPU upgrade problem with M3985

  I try to put a GTX in the Aspire M3985 770 - I have improved the power supply to a 650w with no problems (computer works without the card, as well as the power supply), but when the card is put that I meet problems.

  If I put the card in the system and plug my monitor, the computer gets to BIOS Acer screen... and that's all. After that, I get about 4 beeps every 20 seconds and the screen then goes black with a flashing underscore more than beeps. If I try to access the BIOS screen goes all black.

  If I have the card in the system and try to plug my monitor on the INTEGRATED GRAPH card... I get an error from the BIOS code. 1 long beep and 2 short. I know, it's a video card error. This also applies when nothing is plugged into the card or edge.

  When the card is removed, the problems to stop him.

  What I am led to believe that it is either:
  1. the motherboard is not compatible with the card (this really should not be a problem with a computer that is a year old... If it is, it's absolutely ridiculous.)

  2. the BIOS of the motherboard has problems with the map... a simple update the BIOS should fix this... but as I can see updates of motherboard for this computer have been neglected since BEFORE the release of this card, which explains a lot.

  3. the video card BIOS is the problem. I find it hard to believe though. The map has been updated in another computer. The card works fine, and the BIOS is in final review.

  Help to fix this would be appreciated so I can decide what I'll do with this card.

  Thank you.

  Just thought that I would let you know I solved the problem by changing the motherboard.

• Problem with CFimage / PNG images

  I have a problem to save images PNG from another server, for example itunes, some work, some are not

  The following picture opens fine in my browser->

  http://A576.Phobos.Apple.com/us/R30/purple/v4/de/60/BB/de60bb7f-8995-4007-cfec-1b0a472fa36 7/icon.png

  This is the error I get:

  An exception occurred trying to read the image.

  javax.imageio.IIOException: error reading the PNG metadata

  Code:

  " < cfimage source = ' " http://A576.Phobos.Apple.com/us/R30/Purple/v4/de/60/BB/de60bb7f-8995-4007-cfec-1b0a472fa36 7/icon.png "overwrite = "true" destination ="#filepath #/ 9999.png '

  action = "Write" >

  I think that some of the images have incorrect/incorrect headers. I guess it's a matter of CF (I use CF8), because it loads correctly in a browser.

  Does anyone have a solution to this? Perhaps another way to get the picture? Custom tag?

  Thank you

  Mark

  I found the problem and the solution. The problem was with the Java, the JVM had problems reading SOME PNG from servers, but not all, there must be a newer way of encoding that was not around when the version of java that I had created, or is it just a bug. I had an earlier version of 1.6 which is downloaded as a version SE 6 from Oracle.

  According to a few instructions from Ben Forta, I tried an update of the JVM to version 7 (1.7.x)

  http://Forta.com/blog/index.cfm/2013/3/3/upgrading-ColdFusion-to-Java-7

  The update worked on my local dev machine that was CF8 with Win 7 64 bit and it actually fixed the CFIMAGE question!

  However, when I did the same update, with the same java file on the same version of CF8, CF is more will re-start throwing an error that it could not find a file.

  Fortunately, I had a backup of the config file because I couldn't change back otherwise if CF would not start the administrator (Java makes also a.) BAK in any case)

  I tried the first generation of version 7, the same problem, so I went to the latest version 6, man 45, installed and it also sets the CFIMAGE crash!

  A few points for anyone else to try this

  Make sure you have a backup of the config, in CF8 is located here (different from the location in the instructions of Bens)

  Coldfusion8\runtime\bin\jvm.config

  Also note that front and rear bars are different for the construction in the JVM that comes with CF and is located in the administrator and the location that you specify

  Place of origin: C:/ColdFusion8/execution/jre

  New location: C:\Program Files\Java\jre7\

  This is the place for the Java file)

  Java SE Runtime Environment 6u45)

  Java Archive downloads - Java SE 6

  Took me days to get to the bottom of this, but the fix is actually in a few simple steps and a few minutes, of course

  Mark

• H8-1447ez: problem with the recovery Image

  I have HP's ENVY h8 PC bought two years ago. Last week, I tried to update my OS to Win10 - in any case - I made the backup of the downloaded and installed on USB recovery Image Win10. Don't like it, then

  because win 10 deleted the entry of the new filming, I use my USB key to back to Win 8. After some problems, I successfully restored my old BONES, but it does not recognize the partition of

  the recovery Image - neither the original nor the USB.
  I mean, if I go to settings-> change the PC-> General settings-> delete everything and reinstal windows-> start-> Reset your PC-> next it says: cannot find the files needed

  Is it possible to fix this?

  Ladies and gentlemen: PROBLEM SOLVED...

  I have successfully restored my PC in its original configuration - if you want, I can write how separate article make (fix Recovery Manager and problem with Recovery Manager not seeing original missing recovery Image).

  @veilendank10: thanks for trying to help, but my problem is of a very different nature.

• Problems with playback of .mpg files & other video files

  Hello:
  All of a sudden I couldn't read the. MPG files (like other video files. AVI are reading OK!) : I have not had any similar problems with him before!  I checked briefly setting CODECs, but did NOT find anything wrong. I also found the following:

  -Receive an error message "the parameter is incorrect" when I try to open any video file EXCEPT. FLV files: all the other video files cannot be opened by the player 'Crazy' 'MEDIA PLAYER CLASSIC - Home Cinema' that literally blocks the use of the Windows Media Player - what an intrusion by the player "MEDIA PLAYER CLASSIC - Home Cinema" against the wishes of the user.

  -J' always set up as the DEFAULT program for most of the video-Windows Media Player files and I DESPISE any program that dares to change these settings of the PC user.

  I would be very happy if someone can help me with the following:

  -What is the cause of MOST OFTEN of such unexpected problems with the PLAYBACK of VIDEO FILES
  -How to make Windows Media Player troubleshooting to RESTORE the original settings for the opening of the video files: there seems to be EXTREMELY disorganized and deficient/little clear instructions by Windows HELP how effectively restore the functioning of Windows Media Player - have Version 11.0.6002.18311 (Pentium IV with VISTA Home Premium).

  Thank you.

  Hello thorsak,

  I suggest reviewing the responses in this thread, because they seem to relate to what you're asking:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-sound/is-there-a-way-to-uninstall-and-reinstall-Windows/eb329d2e-0f70-4b27-81bd-bbdd64b0603a

• Problem with updates! Microsoft files won't open!

  My HP just installed automatic updates and then I couldn't access my Microsoft Office files! I went back to the point files and its fine, but I'm afraid to leave my computer to install updates again! What is going on! What should I do?

  (FYI - I have an old version of Microsoft Office - I think that it's 2007)

  Hello

  Sometimes there are problems with the microsoft updates that can cause this kind of problem, but most of the time that Microsoft will come with a patch or a patch for this update soon... I would recommend to not not to manually update now since have restored the top. wait for automatic updates to run and then it should be good.

• Problem with the number of files?

  Hello guys,.

  I have a problem with the compilation of some projects...

  I realize that when my project 201 records in total (including the file config.xml, Active Directory and directory ext) they do not compile.

  If I delete all the files (if the project has 200 files in total), the success of occours compilation.

  See:

  E:\BlackBerry WebWorks Plug - in Eclipse\plugins\net.rim.browser.tools.wcpc_1.5.1.201010291444-22\wcpc>bbwp.exe "C:\Documents and Settings\Softwell\Desktop\blackberryhtml5.zip".

  [INFO]                  Parsing of the command line options

  [INFO]                  Bbwp.properties analysis

  [INFO]                  Validation of archive application

  [INFO]                  The analysis of config.xml

  [INFO]                  The application of filling source

  [INFO]                  Compilation of application BlackBerry WebWorks

  java.io.IOException: cannot run program ""E:\BlackBerry"(in the"C:\DOCUME~1\Softwell\CONFIG~1\Temp\widgetGen.4723774651307629071871.tmp"directory): error = 87, Parometro incorreto CreateProcess.

  [ERROR]                 CAP exception has occurred

  Can someone help

  Hello tneil,

  Well, I found the problem and a solution.

  The thing is: my project was not limited by the size, this is the number of files (200).
  I realized that BB has released an SDK 2.0 (I used 1.5) and I tryied to compile with the 2.0 and everthing works fine!
  The problem is how bbwp.exe communicate with rapc.exe, maybe he tryies to send files by command line and it has a limit. With the new sdk, it uses a file temp with all orders. This is why it works.

  The maximum size of 7MB, I can't say anything, because my apps are about 3-4 MB. But good to know, if I can put in my documentation.

  That's all.
  CYA