Mounting of USB devices via an OTG cable

Similar Questions

• How to connect an external device via an Ethernet cable with iPad Air?

  I need to connet to my iPad, a digital mixing console THE Behringer X Air xr18.

  LLA WiFi connection e/s is not overall durin live so I need to use the Ethernet cable.

  You can not unless someone makes a dongle, but even in this case an application had to talk with the dongle do not believe that a dongle could add something like kernel as a new network interface which could access normal applications

• Emulation of USB (flash drive\HDD) for USB devices

  Enybody have ideas how to emulate external USB devices via USB port in LabView (DAQ 6221)?

  LabView to work with the USB device, but I need to emulate this feature for other devices...

  Thank you

  Hello Alex,.

  There is a good Article in the knowledge base on the simulated devices you should check:

  3JLD2HB9 Knowledge Base: what are NOR-DAQmx simulated devices and how to use them?

• Not truly Plug & Play with the generated for custom USB device .inf file

  Hello

  We have developed an application that uses the library OR-VISA-in order to communicate with our USB device via RAW communication.

  This is why we created an *.inf file using the driver Wizard. Once we plug-in the device for the first time, windows enumerates the device successfully and the 'Found new hardware' pop-up - window.

  We chose the .inf file that is created, and the device is properly installed.

  Our problem occurs when we plug one another device of the same type but with a different Serial-ID (which means that same VID, PID, only the ID for the USB - stick is different).

  For all devices with a Serial-ID, which has not been connected to windows, and yet, the "found new hardware" - window opens again so that you HAVE to choose the installation procedure. Despite the fact that the driver for this type of device was already installed, windows does not affect our driver .inf file to the device.

  If we chose, then in the "Found new hardware" procedure - the "Automatic Setup" window - the device is installed and can be used successfully.

  Of course, windows recognizes the right driver but does not automatically assign it without pop-up windows. We want to avoid the pop-up reapeating for each device.

  I did some research on this subject, and now I guess the problem is that the generated .inf file has no signature.

  Does anyone have experiences on this subject? Am I wrong? Does anyone have or had the same problem?

  All solutions next assign the same ID series for all devices?

  Here some quote the file setupapi.log (which seems to confirm my hypothesis):

  # 199 Executing "C:\WINDOWS\system32\rundll32.exe" with command line: rundll32.exe newdev.dll, ClientSideInstall \\.\pipe\PNP_Device_Install_Pipe_0. {} FA2413C7-7354-42DC-845B-DC109B5174FC}
  #I060 set driver selected.
  # 019 Searching for hardware ID (s): usb\vid_1234 & pid_1234 & rev_1234, usb\vid_1234 & pid_1234! (1234 VID is only for the objective test!)
  # 018 search compatible identification: usb\class_ff & subclass_00 & prot_00, usb\class_ff & subclass_00, usb\class_ff
  Found #I022 'USB\VID_1234 & PID_1234' in C:\WINDOWS\inf\oem70.inf; Feature: "xyz"; Pilot: "xyz"; Supplier: "xyz"; MFG: "xyz"; Section name: "NIVIUSBK_Inst."
  Node #I087 untrusted, rank replaced by 0 x 00000001 0x0000c001 driver.
  Actual installation #I023 section: [NIVIUSBK_Inst]. Rank: 0x0000c001. Effective driver date: 25/09/2007.
  # 166 device install function: DIF_SELECTBESTCOMPATDRV.
  #I063 Selected driver installs from section [NIVIUSBK_Inst] 'c:\windows\inf\oem70.inf '.
  #I320 of the remains of the device class GUID: (36FC9E60-C465-11CF-8056-444553540000).

  Welcome,

  Philipp

  Hi Philip,

  Thanks a lot to post your question. I talked to our specialists in the United States on the signing of your created driver. You will find a brief description in the Readme of NI-VISA:

  "WHQL signature hardware USB.

  WHQL (Windows Hardware Quality Labs) sign your USB hardware using the driver NI-VISA for Windows XP / 2000, as part of this process it takes a PDB (program database) file to the underlying driver (NiViUsbK.sys).

  NiViUsbK.pdb is provided for this purpose. It is in \WinNT\NIvisa\USB. This is usually C:\VXIPNP\WinNT\NIvisa\USB. »

  To get it done, you must contact Microsoft. We are not allowed / able to sign your driver for you.

  Perhaps, the following link helps you: http://www.microsoft.com/whdc/winlogo/wlk/default.mspx

  Best regards

• Install the drivers for USB devices is time consuming

  Original title: slow down the device

  I use Win7 Ultimate (32 bit) on my computer compaq laptop.

  Whenever I connect a USB/device via USB or Bluetooth device, installation of the driver takes a long time.
  Please help me solve the problem soon!

  Hello

  What is brand and model unit?

  Method 1: Run the hardware and devices Troubleshooter

  See the following site:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 2: Clean boot

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  See the following site:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.microsoft.com/kb/929135.

  Note: once you are done with the boot, follow step 7 article to set your computer to normal startup.

  Note: When you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).

  Method 3: Update the Bluetooth device drivers

  See the following site:

  Updated a hardware driver that is not working properly

  http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly.

• USB OTG cable adapter

  The Sony Xperia Z1C does support USB OTG cable adapter?

  You can use an OTG adapter, as well as the phone but the phone will be able to act as a host device.

  The difference is that devices that support the USB OTG standard can, in some cases, take turns acting as host and slave when linked together. This allows the two devices to read each other system files. A device that only supports the standard of the host may act as host.

  Connect a USB to your phone with the help of an adapter OTG is something you can do, Yes. Another example would be that you can connect a mouse or a keyboard and use it with the phone.

• Does not support the Lenovo S650 Usb otg cable

  I bought the new lenovo S650 and I connect the usb otg cable for read my USB but it does not support? Why? Please help me

  S650 hardware does not support the OTG. Regardless of the cable.

  The micro-USB port to charge the phone only.

• I cannot connect to the Internet via an Ethernet cable but I am able to connect with other devices.

  Original title: deleted Ethernet adapter

  Hello

  All trying to fix my computer run Registry cleaners, I managed to delete my Ethernet adapter, I have taken steps to try to fix this problem and have been advice to visit Microsoft support for help.
  I have a Dell Dimension 5100 and am running Windows XP, I am unable to connect to the Internet via an Ethernet cable but I am able to connect with other devices.
  First of all, I contacted my Internet provider which forced me to various checks to see why I was getting a message saying acquiring network address and it seemed that I had no IP address and could not connect. He eventually get look in the network adapters Device Manager, he demonstrated Intel PRO/100 VE network connection that is activated in the State shows that it works, but there is no Ethernet adapter shown in this place.
  I tried to insert Dell drivers and utilities disk, but that does not change.
  I tried to download on an other computer files from dell that look like they are pilots.
  I tried to set up a new connection
  None of what I tried so far seems to have worked, can anyone suggest what I can do to fix this?
  Thank you
  Kevin

  Hello

  1. what you're trying to fix by running registry cleaners?
  2. How did you remove Ethernet card?
  3. How are you online using other devices?
  4. What are the devices are?

  Intel PRO/100 VE network connection is the Ethernet adapter on your computer. The following articles may be useful:
  How to troubleshoot possible causes of Internet connection problems in Windows XP
  http://support.Microsoft.com/kb/314095
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• How do I have more mount microphone USB entry on XP so that I can select another line in devices?

  I am running XP. I have a video camera with microphone input via USB. When this device is connected I can't select other audio inputs when using any audio software. I can't select Line In, Line Out, or Wave In for example. If I remove this device, these features can be selected. Why XP doesn't allow you
  Select the activation of a USB device. Thank you * address email is removed from the privacy *.

  Hello

  I suggest you to follow these steps and check if that helps:

  a. Click Start, go to control panel.

  b. Select sounds and Audio Control Panel devices.

  c. on the Audio tab, change the default recording device.

  d. the options to select the specific entry should be available later.

  e. Select and click on apply and ok

  It will be useful.

• Sony EC310 USB OTG cable

  Quick simple question, is the above mentioned cable Z5c compatible?

  Thank you

  It works with Z5 Compact but note that Z5 does not detect a USB device automatically when you plug it in. You must go to the settings-> connection-> connectivity-> USB device USB device detect.

  It also detects USB devices during startup so where the touchscreen does not work, you can plug in a mouse, turn the phone off and then on again.

• I installed a USB device to a radio control. I have a total control, but cannot activate the audio in and out via USB

  I installed a USB device to a radio control. I have a total control but fail to activate the audio in and out via the USB port. The device does not appear on audio routing options (left click on the logo of the speaker), any ideas please?

  Tim, first read the whole message!

  (This after below is complete) Remove all usb drivers and charging system leave, after reboot, make sure that the item in question is connected before the reboot.

  Follow the steps 1, 2 and 3 below.

  1: make sure you use Win7 SP1 and all updates are current and responsible.

  2: after insurance above, go to Device Manager and remove all THE USB drivers. Don't worry, it will reload.

  3: reboot then System Device Manager will research and required load all the drivers.

  He must find all the items. If it does not investigate that in question is Win7 really compatible, 100%.

  If 100% Compat. with Windows7 should find!

  (Also make sure that the automatic Windows upgrade and install is enabled for software and hardware drivers)

• Is it possible to debug an iOS device via a USB rather than using the network?

  Hello

  Is it possible to debug an iOS device via USB instead of using the network? I want to test demand for offline scenarios. Please let me know.

  Thanks in advance,

  Swathi.

  Router is on but disconnected from the internet. Your computer is assigned an ip address by the router. It will be something like 192.168.0.1 the IOS device can be 192.168.02. Most of the routers will identify attached devices and their IP via the administration panel. If you receive a Windows command prompt and type ipconfig, you will see the IP address of the PC.

  Your router is now a LAN - is differrent from being connected to the internet.

• Management of the client via GPO USB devices on Server 2003

  I copied the code available in http://support.microsoft.com/default.aspx?scid=kb;en-us;555324 and facilities an .adm file. added the template to the GPO administrative model. Me has "Restrict the player" under "Custom policy setting" under administrative templates. However, could not find anything on the right pane of the GPO while selecting "restrict drives". Pls tell me what needs to be done to make me the options to disable the USB devices on all customers of my company

  Hi Lenka,

  The question you posted would be better suited in the TechNet Forums.

  I would recommend posting your query in the link below.

  Windows Server forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• BlackBerry Smartphones has tried to update the device software, now unable to connect to the device via USB

  I tried to update my 8100 to the 4.5 software.  I first updated the desktop to 4.7 software, then tried to update the device, but the process has failed.

  Now, when I open the Desktop Manager it shows not connected to the device.  I can go to the properties of the device mamager and select the balckberry, but when I return to the destop eat it says no device.

  It seems that whatever I do, it does not recognize the usb device.

  The display on the 8100 is company information only text, no graphics or by phone, and it is virtually unusable.

  There are options on the screen for some applications, but if I choose them, it says app not found.

  Is there a way to force an update to it?  Or I poohed this phone?

  Thanks in advance

  Edit:

  I pulled the battery on the device it reboot and tried to return to a former Office Manager Update

  1. unplug BB from USB and PC. Restart the PC turned off completely.

  2. for BB, you'll charge back to the theme that was used on the device when you upgraded, which will normally give you a black and white screen. You must follow the instructions below.

  You will need to use JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:

  http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

  If JL_Cmder does not work, follow this instruction:
  http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe

• Is AT200 - possible to connect USB devices?

  Hi all

  I bought last week a Tablet AT200-100 (in Spain), and a few days ago I also bought an adapter for USB cable for it. I've seen (at least that is what I understood) that it is possible to connect devices to the Tablet (as a host).

  Well, I tried with two cables different and two different pills (I went back one and got another), and I can't get it to work.
  I hope you can help, maybe I'm doing something wrong...

  I used a micro USB B (plug) to USB (plug) adapter, and I tried to connect a USB keyboard, mouse and an external hard drive. Everything seems to work, nothing doesn't appear on the screen, and nothing new appears in the file manager. The light devices has never lit at all.

  Is it necessary to install something before? To activate something?
  I use a bad cable?

  Help, please!

  Thanks in advance!

  Hello

  The AT200 seems to be equipped with a USB port of microfiber that support OTG technology.
  Allows you to connect the key USB and HID (keyboard and mouse).
  This port is USB 2.0 compliant.

  To connect a USB (memory flash USB, keyboard or mouse), you must use a cable OTG (USB On-The-Go). The cable must be certified USB ON-THE-GO.
  http://en.Wikipedia.org/wiki/USB_On-the-go

  PS: this Tablet does not support a printer and as I know the operation of the port of USB devices was not confirmed for some USB devices may not work correctly.