mouse down? filter no correctamente works

Similar Questions

• How to set fire to a single event "mouse down" when a tab control and its digital control have all two events 'mouse-down' with different function

  Hi all

  I have a digital control in a tab control. Both of them have their own events 'mouse-down' in a while loop. But when I click on the digital command, instead of raising the event of digital control only, both of these two events fired.

  Maybe I can check if the mouse is in the range of digital technology to filter events, but if the window is resized, I have to recalculate the range once again.

  Is there another way to do it?

  I pasted the test code too.

  Thank you!

  Excerpts of work

  

  Side note: I really don't like the controls on the tab and use them very rarely.  And the few times I use them, it is for tabs to which I often use to select among the screws to put in a secondary school.

• Mouse down? Event rejection does not

  Dear community,

  Please could you help me to work the reasons why the mouse down? Event is not be thrown in the following code. I deleted all but the relevant controls. It must be that clicking a control with the left middle of the mouse or buttons right mouse returns the name and the control key, it has been activated with (which it does), but NOT when the Boolean lock is True.

  However, he seems to ignore the value of the Boolean lock?

  Please help me understand what I did wrong here.

  Many thanks in advance,

  R Gibbs

  In the event of filter actions are performed without worrying.  If you add another case of "Change value" or "Mouse Down" for all these buttons, it will not be triggered when the lock is set to TRUE.

• Picture of the events of clusters - change value and the mouse down

  Hello everyone

  I am facing a problem of triggering events using two arrays of clusters.

  I have two paintings of clusters: A and B. There is a Boolean control within each group and to maintain the two paintings in clusters at the same index value (indexVals), the vertical scroll bar of A is hidden but the vertical scroll bar of B is visible. I was using a case with 3 cases triggered by structure: the mouse down, timeout and the mouse upwards. The case of "mouse down" feeds of terminal 1, which makes the case "timeout" the waiting period. The case of "timeout" continues to fuel terminal 1 timeout and has two property nodes (one for A and for B) makes the value of B indexVals is written on the indexVals of a. inside the case of "mouse up" it has a value of-1 for the terminal timeout, putting an end to the process. OK, it was working great. But...

  Now I need to keep the same procedures described above, but I need to raise an event when the user clicks any boolean (led) change state. I thought about the event "change value", but when I click on the led to trigger the event of "change value", the "mouse down" event is also triggered.

  Any suggestions?

  The real VI is a little different from what I described, but the problem is exactly the same.

  Thank you

  Dan07

  Like this:

  

• Event Structure... the mouse down or to the cases of change of value

  I feel, it is a simple problem, but I can't seem to find a solution.

  I have a VI that is supposed to communicate with a stepper motor drive.  I'm working on the Boolean setting keys on the Panel before (acting as of the momentary switches) that will jog the hourly engine or counterclockwise, as long as the button is pressed.  Once the user releases the button, the motor should stop jogging.

  I tried to use the mouse down and value change event.  With the help of the mouse down, for some reason, the time-out occurs almost immediately even while holding the mouse on the button.  This translates into what seems like nothing is happening.  Although the engine receives all orders he has to run, it receives the stop command immediately after.

  Using the value change case, the procedure works and the motor turns, but when you release the button (another change of value), all orders of jog are returned to the engine stop control tracking.  Sometimes the motor continues to run after the shutdown command has been sent, and I think that might be involved because it receives all the shortening of orders (again) and the judgment of control both.

  Is it possible to cnage my case event to run the way I want to what he... Send commands to the button click on... Send different command button.

  Thank you.

  Thanks for the suggestion...

  I could solve the problem I had.  Previously, I was trying to display the timeout to-1 to a value greater than 0 to launch the timeout on a button release event.  To solve the problem, I just removed all of the code that has been changing the value of timeout and left the default to-1.  I also removed all the code in the case of timeout.  Then, I created a new mouse event that is fired by releasing one of the buttons and copied in the code that used to be in the case of timeout.

  Now, the works of VI exactly as I need to... where an event occurs on a mouse a click of a button and a different event happes when the button is released.

  A very simple solution, however I've only worked in BT for about a week and I have not seen the mouse event when I scroll to the event.

• What is the difference between the mouse down? and regular mouse down events?

  Look at the event, I see a labled:

  Mouse down

  And the other as:

  Mouse down?

  With the question mark at the end... What is the difference between the two? I do not see the difference described in the Help menu... it's LV 2011 version.

  Thank you

  Cayenne

  Joined another VI watch how an event filter is used to change how the mouse button seems to have been pressed. It's in the LV samples with some modifications made by me.

• Slide with several digital poster Down filter event Bug button?

  A key event filter on a slide with several digital screens down does not work as expected when not waived. If you for example tab of this slide with two digital screens digital display, the cursor remains on his position, rather than get KeyFocus to the next control. Same behavior at fault if you want to move the cursor on the left/right keyboard, nothing happens. Anyone an idea why?

  A simulation of that VI is attached. All other controls, a Slide with a digital display or a standard digital control, the key Down event filter behaves as expected... I tested in versions 8.5.1 LV (attachment), LV2012SP1 and LV2013.

  A teammate now found a solution or workaround. We do not know if this is the way it should be, if yes, then it's a bit hidden, but it works!

  It seems that the cursor needs to know on what digital display the FocusObj is when you use the event notifier KeyDown. Then, when to get the reference of the digital display active and the wiring of this reference to the terminal FocusObj filter event everything works as expected, numbers of tabs, typed, cursor etc and have to filter and notify events structure to the event.

  A vi and a printscreen are attached.

  The question is probably due to the specialty of slides and the class NumericWithScale in general, as its digital displays are a little under References and during the implementation of the features of event KeyDown for the class NumericWithScale filter, LV simply does not know on which side of the main action control part must be executed.

  Or someone has a better solution and explanation?

• Microsoft wireless mouse 6000 v2 just stopped working

  I bought 6000 Microsoft wireless mouse and keyboard a year ago and just mouse combo has randomly stopped working.

  I turned off my computer and the next day it turned on and the mouse does not work now.

  -J' put in new batteries and re-synced it and who did not

  -J' tried to connect on the other USB ports, which did not work

  -J' reinstalled the driver, who did not work

  -J' tried it on my laptop and it doesn't

  I think that my warranty has expired as well.

  Microsoft please help, there was no sign of him dying off the coast, and I don't see what anyone who would have triggered this.

  It just seems odd that one day that shut down you your computer, and the next day your mouse does not work.

  Hi BrandonBB,

  ·         Remember to make changes on the computer before the show?

  ·         You receive an error message or error code?

  I suggest you follow the steps in the bottom of the article in the Microsoft Knowledge Base to resolve this problem:

   

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Let us know if it helps.

• sound buttons on my mouse and keyboard do not work

  My volume keys on my keyboard (winder aside microsoft x 6) and my mouse (logitech G9) does not work, I reinstalled it drivers but they do not seem to work (they use to work fine)! I tried Googling the problem but stil no response! mute my button on my keyboard works but will not work the volume up and down! someone knows how to solve this problem!

  Hi barry1980,

  Thank you for visiting Windows Vista Microsoft answers forum.

  You can perform a system restore on the computer to a date where the keyboard volume control button and the mouse was working fine. In addition, you can try to check with another keyboard and a mouse.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue. 2. in the System Restore dialog box, click on choose a different restore point and then click Next. 3. in the list of restore points, click a restore point created before you started having the problem, and then click Next. 4. click on finish. You can visit the link to the KB Article for reference: http://support.Microsoft.com/kb/936212

  You can also uninstall and reinstall the keyboard device driver.

  Uninstalling and Re installing keyboard driver from Device Manager:

  1. open Device Manager: Click the Start button, in the start search box, type devmgmt.msc and press ENTER. 2. in the Device Manager, on the left hand keyboard, click the PLUS (+) symbol. 3. under the keyboard, right-click on the Microsoft Keyboard to display the menu drop down. 4. in the drop down menu, click on uninstall. 5. in the dialog box confirm the device removal, click the OK button. 6. restart the computer and then install the Microsoft Keyboard driver.

  Please let us know if it helps.

  Thank you and best regards,
  David

• Microsoft Wireless Desktop Keyboard/Mouse 6000 V2 does not work properly.

  Microsoft Wireless Desktop Keyboard/Mouse 6000 V2 does not work properly.  The mouse does not allow me to use the wheel to scroll down to option and when I look at the drop down list, it does not keep list open.  It opens and closes the list immediately. He continues to return the list to the top of the drop-down list.  I checked the batteries in the keyboard and the mouse (replaced) resync'ed the two keyboard and mouse ports changed the receiver performed in and checked for update on both keyboard and mouse and have restarted my computer several times and it still does not work properly. I bought this Office Microsoft Wireless Keyboard and mouse 6000 V2 there are three 3 months and he can't take back to store because it has a warranty of 30 days of the store.  Help.

  Try it on another machine to ensure that it is not the lack of equipment.

  And make sure you have the latest drivers/software installed for him.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool liquify (photoshop cc 2015): what should I do?

  Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool of liquefy; I can't change the size of the brush or hardness. OS win 7 Professional 64 bit, wacom tablet intuos 6.3.14 - 1 driver s pro, Photoshop 2015 CC worm.  2015.0.1 20150722.r.168

  What are your settings of GPU acceleration?  As I understand it, the Alt right click size and hardness adjust needs acceleration GPU to be turned on, but I have a feeling Brush hardness is always set to easy when using fluidity.  You can still see the quick mask as representation of the soft brush when Alt right click, but you can't change the hardness.

  Is that you can change the brush size and pressure (framed in red in my screenshot) Alt right click drag left and right changes size and down to pressure changes, and you can see what is happening in real-time by looking at the sign on the right.  It works independently of your acceleration GPU (IME) settings, but you don't get the effect of soft red quick mask.

  

  Does this fit with what you see, or you are not able to change things at all?  If not, then I've always found that fluidity consumes system resources, if you could check the Task Manager > Performance tab to see what kind of RAM and CPU use is using the fluidity.  That's what I see after direction the lens above with a big brush continuously for 10 seconds.  Note This is on a fairly quick NLE System.

  

• Only highlight when the mouse down on an object, but not when Rollover

  I want that selected area turns blue when I'm selecting with the mouse down (like the selected cells in Excel). I can do it with Captivate 5?

  Create three images (I use mostly PNG) and don't forget to label them in XXXXX_down XXXXX_up and XXXXX_over - when you replace XXXXX with the name you want, the rest is important to be exactly like that.

  Replace your current button with an Image button and point to one of these three images - CP will automatically associate the three of them to the appropriate button States.

  Take a look at the Gallery\Buttons in the folder of Captivate 5.5: you will see that all the buttons default image have these 3 versions corresponding to the States. It is not necessary to put your custom in this folder buttons, put together them in any folder you want and it will work, of course.

  Lilybiri

• mouse down shows small text

  I had a hard time finding where the difficulty this mouse to the bottom of the problem. On this new site magbacker.com, when you click on the left navigation text the text gets smaller. I have a separate css style sheet called 'sprymenubarvertical2.css' and a stylesheet css global site called 'magbacker.css '. I have also some styles of internal css on each page for specail design elements. The size of the font of the left navigation is 17px and on some pages, it goes smaller when you click the mouse down on the text. Some pages, it remains the same which is what I want. I don't want the text to change when clicking on it or by making a mouse down. I can post the code here if necessary css but you css savy coders should be able to see that it inspires veiwing the source code on the site.

  I work on the site as you read this, due to a timeframe so maybe some things changed.

  Any help on this seemingly simple fix would be more apprecaited.

  http://magbacker.com

  Thank you

  Jay

  On each page, you have built-in styles.  -Change

  a:active {     text-decoration: none;     font-family: Arial, Helvetica, sans-serif;     font-size: 10px;     color: #00F;}
  

  on this subject.

  a:active {     text-decoration: none;     font-family: Arial, Helvetica, sans-serif;     color: #00F;}
  

  In addition, while accessing one of these pages, increase the text size in your browser several times and you will see why pleading us with people NOT to use absolute positioning as a page layout tool.

• Selection drop-down menu does not work on "display".

  33.1 Firefox latest and before that had the problem

  If I go to 'view' then 'zoom in' or 'sidebar' or 'toolbar' nothing shows.
  also can not copy or paste on / in the address bar.

  works fine in safe mode.

  But I can not disable add ons because
  those disable drop down menus do not work.
  so I can't turn them off.
  may have started in the last version
  SO I can't say which add on is a problem.

  BTW, I have windows 7

  Hello telebob, try turning off hardware accelerationand check again (in safe mode hardware, acceleration is disable).

  Thank you

• drop-down lists do not work

  When I'm FaceBook, drop-down desires do not work in Firefox, but work in Chrome. For example, when I click on the arrow next to the House, I should get a drop-down lists which includes the possibility of closing the session. But nothing happens. Also, when I click on the arrow next to a post, I should get the options for this post, but nothing happens.

  There are two or three modules that stop a click in the upper part of the contained part of the working window.

  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes