Mouse event to < mx:Image / > does not good localX, locally

Similar Questions

• Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Most desktop printers cannot image all the way at the edge of the page.

• Why the original image does not appear on my desktop and not Wo one?

  Why the original image does not appear on my desktop and not Wo one?

  I made adjustments to an image that shows himself such that adjusted with the symbols at the bottom right of the image.
  I tried to drag and drop and he transferred the original image.

  The adjusted picture can be transferred and what I need to do or I do something wrong?

  Thank you

  Greg,

  Claes has pretty much nailed. You will do well to spend time to learn how Lightroom works. He is not like most software that you've used before, and if you don't understand what it does and how it does, you stand a good chance of losing your images.

  Try googling 'Lightroom tutorials' or 'get started in Lightroom. It's not rocket science, but it's different.

  HAL

• Background image does not appear

  I worked on my Web site recently, and in order to personalize it a bit more I added some background images to the cells. The problem is that the image does not appear in my browser. I tested background images of page too and nothing. It makes no sense. I select the cell, go to the properties panel, and then find a background image. Once I have select this one appears in dreamweaver, looking the way it is supposed to. After I downloaded the page, however, I check in my browsers, Mozilla Firefox and Internet Explorer, and the image is not there. All this shows is the background color of the cell or of the page, depending on the question of whether I make the background color of the transparent cell. I asked a few friends to view the page too to see if it is for them and they tell me that it is not for them either. Anyone know why this is happening? Oh I should mention I publish as an html file and I tried both .jpeg and .png file types. In addition, it's all in Dreamweaver 8. Any help would be greatly appreciated. Thanks in advance.

  Background ="... /... / move background2.jpg

  can't go up two levels of folders from there...

  Also should avoid spaces in the names of files and folders.

  copy of a previous post on this topic:

  the style sheet link and especially images that you have placed have paths such as
  this:

  ../gifs/ means go UP one folder level, then into the folder named ">

  The problem: the home.html file is at the level of the root of the public
  space web is not not to attend. So all these paths are distributed on the
  downloaded pages.

  My guess her site definition is set to the wrong folder level in the
  local and remote site.

  The way it should be is the local and remote should be defined in the folder
  that contains home.html. Use the 'Folder of the Site Local' button to select the
  good record and the "host directory" If the folder level must be
  adjusted on the remote control (such as you land in a high level of private accommodation
  folder when connecting with ftp and need to go to one site files
  folder named "public_html" then type public_html directory of the host
  the remote server info line)

  > The page is http://www.flash-vault.com/submissions.
  > The background image is supposed to appear behind the five titles in the
  > first column. It appears in dreamweaver and when I saw, but not after
  > It is published.
  >

• Craigslist 'Reply' and the buttons 'Add images' does not

  Until a few weeks ago, I used Firefox with no problem when browsing and posting Craigslist ads. Recently, the 'Reply' button in the messages does not at all. Nothing happens when I click it. When I write ads, the button 'Add images' does not save when I click it. I had to go back using Internet Explorer when using Craigslist. Help, please! (If it helps, I had to post this question in Internet Explorer, as the button "Question" on the page does not work in Firefox).

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Vision Inspection Builder 3.6 calibrate Image does not work

  I use a camera, NI 1722, with the Vision Builder AI 3.6 software to read 2D data matrix code.

  Unfortunatlly the camera can be mounted directly on the code, its at an angle of about 20 °.

  The step of "Reading data matrix Code" works very well, however we don't always not the classification "nonuniformity Axial.

  I want to calibrate the image to adjust the view. To do this, I find the 4 edges of my matrix Code, then 4 intersections of the edges (ie the corners)

  I know that my matrix code is a square 9x9mm. So, I use the Image step calibrate to account for this.

  It works very well in "Setup" Mode, when I run individual State.

  However when I run the Inspection, step to calibrate Image still fails and is not calibrate the image.

  Please find enclosed pictures of file and the example of the vbai.

  After trying many different things, I later upgraded to VB AI 2009 SP1

  Yet once after many different configuration etc, I finally solved the problem.

  (1) with VB AI 2009, if you apply calibtation to a step to acquire images, it will always fail!

  I don't know why this option is there (maybe it works with different cameras)

  (2) you must use "Select an Image" step between steps acquire Image and the Image calibrate.

  Calibrate the Image does not seem to use the last Image acquired in the State

• SSRS 2008 SP4 - header or footer of the report contains the dynamic image does not change

  Hello

  Our version of Reporting SERVICES to current production is 2008 (not R2). And we have the problem that the header or footer of the report contains the dynamic image does not change accordingly.

  According to this hotfix, the problem has been resolved in the last SP R2 and we tested, it works.

  https://support.Microsoft.com/en-us/KB/2563216

  So we applied the latest SP to SQL Server 2008, however, the problem persists.

  However, we do not expect to upgrade the SQL Server 2008 to 2008 R2 for the moment.

  Guys have faced the same problem before and has an idea how to solve this problem on SSRS 2008 or any workaround?

  Thank you

  Kind regards

  Dan

  Hi Dan,.

  For assistance on questions related to SQL Server 2008 and SSRS 2008 SP4, ask your questions here:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  https://social.msdn.Microsoft.com/forums/en-us/home?category=SQLServer

  Hope the information is useful.

• Running win XP pro sp2 mouse moves, but everything else does not

  Running win XP pro sp2 mouse moves, but everything else does not respond after a certain time. Just started doing this last month. Had Xp for several years without ANY problems at all.

  Hi BobM202,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  3. do you have security software installed on the computer?

  4. are you referring to freezing except office mouse movement?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• The right click "rotation" clock or function in a clockwise direction counter on my images does not work

  The right click "rotation" clock or function in a clockwise direction counter on my images does not work
  There is a range of adjustment that may be messed up?

  You are under Win XP and the display of photos with Windows Picture and Fax Viewer?

  Explain what you mean when you say "does not" you receive an error?

  The following command will force a reinstall of Windows Picture and Fax Viewer and can be worth a try:

  Reach... Start / run... and type
  (or copy and paste):

  regsvr32 /i shimgvw.dll

  (Yes, the space after the 2 and the)
  After the i is necessary)

  Press on... Come in...

  You should see a dialog box stating:
  DllRegisterServer and DllInstall in successful shimgvw.dll

• Use Microsoft Wireless Notebook Laser Mouse 7000. Horizontal scrolling does not work

  Original title: mouse scrolloing problem

  I just bought a Microsoft Wireless Notebook Laser Mouse 7000 and my scrolling does not work, is their a way to implement or to solve this problem?

  Hello

  1. the problem occurs on a particular application?

  I wish that you follow all the methods in this article to resolve the problem.
   
  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091

• I have my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it might

  Can I get help with a problem please? my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it. I tried to delete some files, but it wouldn't let me not make a right click on it to remove

  could you please email me at * address email is removed from the privacy *.

  Thank you very much. I hope hear from you soon. Thank you once again :)

  Can I get help with a problem please? my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it. I tried to delete some files, but it wouldn't let me not make a right click on it to remove

  could you please email me at e-mail removed for privacy

  Thank you very much. I hope hear from you soon. Thank you once again :)

  You have a laptop. So try the right button on your touchpad. It work?
  If so, the only remaining possibilities are:
  1. bad mouse. Get a new one.
  2. defective UBS port. Plug the mouse into a different port. See if the right click of the mouse works this time.

  P.S. We do give advice to users via e-mail. All responses must be published and remained in this forum so that others with the same problem will use the answer.
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I have a hp m175nw printer. email prints from my iphone, but the image does not work

  M175nw printer. email prints from my iphone, but the image does not work

  If the DPI (dots per inch) is less than 100, the printer will not print the photo because it would be too low in quality. Draw the image on the computer, then right-click on it and click Properties, check the horizontal and vertical dpi and see if these figures are less than 100. Have you tried to connect the iPhone to the same network as the printer and try to AirPrint peak? AirPrint road doesn't have the same requirements on IPR as the ePrint.

• GIF image is not good quality exporting

  Hello

  I'm trying to export Animated Gif HD picture. but when I export animated gif image is not good quality. I selected the default setting.

  Could you tell my how to export the animated GIF HD picture in Photoshop cs5?

  Hello

  Greetings!

  You have reservations because of the color of the GIF color table reduction. Gif images can contain a maximum of 256 colors. There is really not much you can do about it.

  You ask the gif format to support colors, which it is not. The best you can do is experience with dithering options in the window of the Web. However, you're nevergoing to look for a smooth color photography when you use the gif format.

  There may be better options such as jquery, for what you are trying to create. JavaScript libraries like jquery can create animation effects that can use independent png24 or jpg images. Png24 both jpg support smooth color and not confined to a maximum of 256 colors.

  Concerning

  Jitendra

• Edit an image from lightroom to photoshop... Image does not open.

  When I want to edit an image from Lightroom to Photoshop (CC), Photoshop opens, but the image does not work. However, I am still able to do with some images, but some images are simply no opening. This is the time of fisrt I have this problem.

  
  

  My version of photoshop is CS5 extended.

  
  

  I have Lightroom 6.0.

  
  

  I'm with P.C.

  
  

  Thank you
  

  Photoshop Cs5 will not open images Nikon D750

  You must use the version of Photoshop cs6/CC or DNG converter to be able to view these images in Photoshop cs5 in DNG

  Download DNG Converter:-Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 9.2

  Concerning

  Assani

• image does not load in photoshop

  Have paid for and downloaded a stock image

  image does not open in any program, including PS Elements

  message = could not complete request is not the right kind of document

  If the images of the reserve can not load in PS - what can they?

  Yes, this is the reason why you're not ale to load in Photoshop Elements.

  So, this time, you can install the trial version of CC of Photoshop or Illustrator CC to open the image and save it in a format like Jpeg support.

  ~ Sarika