Mouse keeps disconnecting and connecting

I am running windows 7 Professional on my PC and for some reason, I started to get an error with the mouse 'guard disconnect and reconnect' for some reason any. I was using the mouse for a while, but this problem has never happened before, but now it keeps on past and he began to irritate me off the coast until someone knows a solution to this problem?

That may mean its cord is damaged or worn out inside.  Have you tried another mouse?

Tags: Windows

Similar Questions

  • Mouse keep disconnect and reconnect

    Hello.

    I tried everything but do not know why it continues to be.
    I have a Microsoft Intellimouse Explorer 3.0 and 2/3 months, this problem started. At the moment, I changed to my old mouse, an A4 x 7, and after 1/2 months, the same problem appeared in that mouse. Now, I changed back to this one... but yes... no solution.
    What did I try?
    -Install the drivers.
    -Past to all the USB ports that I have in my computer
    -Tried it on other computers (works perfectly)
    - And other things that I did not really understand
    Any suggestions?
    Thank you.

    I'm borrowing another A4 x 7 my friend. The problem disappeared, but I think he's coming back once again as it happened with my old mouse.

  • the magic mouse keeps disconnect

    Since I upgrade 10.11.5 OS, (iMac, retina-1 years material) my magic mouse keeps disconnect in the middle of my work - installed new batteries. And, when my computer is asleep, it is not wake up. Everything freezes. Any thoughts?

    The index is with your comment "of the new batteries installed.    Once you have upgraded to 10,11 El Capitan, there is a mouse specially designed for this OS.   It is not really spoken aloud, but the box for the Magic Mouse 2 has a clear statement to be for OS 10.11 (+).   As operating systems go for ever higher, it may make sense to buy new mouse because all subsequent operating systems will need the facilities of this new creature.    The old mouse will work to some extent, but not, it seems, 100%.

  • My Satellite L350 keeps disconnecting and then restart.

    Satellite L350 keeps disconnecting and then restart.
    The fan is free from dust. I have reinstalled Windows
    There is a new battery for 1 year

    If the laptop is turned off, the battery can be charged. The laptop runs normally on the battery.
    As soon as the power adapter is connected, the computer turns off.
    When I use the computer without a battery but with the AC adapter, the computer shuts down. Test with a different AC adapter, the computer turns off.

    If the cable between the motherboard and the CC is originally the problem whether it is unlikely?

    Someone has an idea to help me with this problem?

    > From the moment when the AC adapter is connected, the computer turns off.
    There must be some kind of electronic problem of power on the motherboard.
    I put t think that the AC adapter is affected since you have already tested another (good job?) Power adapter.
    I think in case of malfunction of the motherboard, the laptop fix can be a costly affair
    The motherboard is one of the expensive parts for laptop and I think that that's not worth buying a new part for this old model of laptop.

  • Internet keeps disconnect and reconnect every 3 minutes

    Original title: network programs network networking Internet Web site Site Web Web Site URL

    Internet keeps disconnect and reconnect every 3 minutes approximately. I changed the computer so its near the door (the router is in the room) but I never had this problem with my laptop.

    Hello

    1. which version of the Windows operating system is installed on the computer?

    2 did you a recent software or changes to the material on the computer?

    You can go through the steps mentioned in the link and the Coachman.

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  • Laptop keeps disconnecting the connection but not others

    I have two laptop computers Toshiba Satellite A300D and A500-13F and a new Linksys WRT120N router. A300D has an Atheros AR9281 wireless network adapter, while A500 has Intel(r) WiFi Link 5100 AGN, and both have Vista 32. It's the A500 which keeps disconnect the connection, it's as if it keeps restarting from the router. It will do this every few minutes and I can't do anything normally on the internet.

    I tried to do something but nothing works. Updating the drivers for the adapter on the A500 does not resolve the issue, although A300D works normally without updates, so there must be something wrong with the adapter on the A500. I also have sellected maximum performance in Power Options > change plan settings > change advanced power settings > wireless card settings, because I read somewhere that energy-efficient settings can interfere with the adapter. I thought that this solution worked until he started to lose and by restoring the link again. Everyone guess what else could be wrong? I generally know how to fix things, but the wifi is a new thing for me and don't know much.

    Yes, in this scenario, this could be the problem with the adapter. Then I suggest that you contact the hardware vendor.

  • My yahoo and facebook chats disconnecting and connects to repeatdly.

    original title: cat

    My yahoo and facebook chats disconnecting and connects to repeatdly.

    Given that your post is obviously not comments on the web site of Microsoft Answers, so I moved it on forum Feedback to windows «Implementation network, mail» and online forum

    Please return to your message and below, you will see a button change.  Click this button and change the menu Windows Version dropdown to indicate your version of WIndows.  People can help you better if they know your version of Windows.  If you are using a version of Internet Explorer, change the other drop-down menu to indicate that it is a question of IE and choose the right version of Internet Explorer.  Change the body of your message to describe any errors or the pop-up windows you see when to disconnect it deliver.  Once you have finished making your updates, click on submit.

  • Drive hard USB 3.0 keeps disconnect and reconnect

    Hello
    I recently bought Silicon Power Diamond D10 1 TB usb 3.0 and I have new laptop Acer Aspire 3830TG with Windows 7 and a usb 3.0 port blue. After pluging it in, driver will connect, but after while it disconnect and connect and so on. I tried to update driver, but he was no help.
    I have a 3.0 port and two 2.0.
    3.0 2.0 - no problem, speed 2.0 port hard drive
    2.0 hard drive Samsung Story Station 1 TB (his own adapter, because its 3.5 inch) in 3.0 hub - no problem, speed 2.0
    harddrive 2.0 2.0 speed - no problem, speed 2.0
    3.0 hard drive 3.0 speed - unstable connection
    More precisely
    Disk management - it shows me his assets and a primary, but it's refreshing as hard disk to restart. the icon will be displayed, but iso hidden when it will disconnect itself
    Device Manager - behavior is the same, it shows the hard disk even if the icon remains.
    This computer - icon will not remain in this view. Sometimes it's on during 2 minutes, but then it will start to disconnect and connect.
    USB 3.0 driver is Renesas Electronics USB 3.0 Host Controller with date 10.5.2012 and 2.1.36.0 version
    He works in collaboration with driver version 6.1.7600.16385(win7_rtm090713-1255)
    Internal hard drive Hitachi HTS547575A9E384 is executed with the same version that is located in the folder.
    C:\Windows\system32\Drivers\disk.sys
    C:\Windows\System32\drivers\partmgr.sys
    Motherboard is Acer JM30_HR chipset with intel Sandy Bridge and southbridge Intel HM65. BIOS is version Acer v1.08

    I said "powered usb hub.

    Updated firmware for the drive and updated the Bios for your Acer, which is not a driver update, an update of the chipset may have an impact on the usb aspect

  • Satellite L650 Wireless disconnects and connection cannot be retrieved

    Hello everyone,

    I have a connectivity problem with my 3 year old Satellite L650, Windows 7...

    I have a LAN wireless in my house, so that my laptop will automatically connect at startup, without any problem.
    After some time (it can be minutes or hours) it loses signal and disconnects.

    This isn't a real problem, because the router is quite far from here, with walls between which can reduce the signal, so no surprises.
    But I can't reconnect later: connection status icon stops working.

    I mean it shows the image corresponding to "available wifi connections" or "connected but no internet access, but or by clicking on the icon or move the cursor of the mouse on it gives no output... it is responseless, and I can't connect to my wifi or any other wireless network.

    I tried to do it from the control panel - network and sharing Center, but the story is the same, the two "set up a new connection or network" and "connect to a network" is not responding when you click on it.
    The only way to connect is to restart the pc.

    How can I solve this?

    Any suggestion is appreciated,
    Thank you!

    > The only way to connect is to restart the pc.
    In case this question is repeated once again, try to refresh and renew the IP address.

    Go to the console (in the type of search CMD)
    Now use the command: ipconfig / renew

    After this attempt to connect to the Wlan again.

    In which case it would not be useful, I recommend you to change the settings of the router.
    I mean that you need to reset the router. Then, you need to test with different types of protection Wlan Wlan connectivity and other standard Wlan (802 11 B G or N)

    Test also the laptop with open WiFi. I mean, you must disable the encryption settings of the router. But this is only for testing purposes.
    The WiFi network must always be secure.

  • CWindows system32mswsockdll, always disconnect and connect after wsock reset three times and that is to say money three times but look what I find___

    I start my dell Inspiron 1501 PC, norton internet security error box Monte, also I tried asking that to see what happens if I do not do anything and of course after five minutes "dial up connection" starts the numbering and connect to the internet after connecting I get the change of windows defender review box by known application system , change the execution of type app, cwindowssystem32mswsockdll. I have reset mswsock three times every success and also opt ie8 several times, something that I found too, that is to say the ie8 install the first installation was sstopped because the computer turns off, and the second installation did not have a log output?, gave an error of output? - auto launch, I connect together when I click on ie dial-up connects If I click on ie, it launches and connects and the disconnected i get Defender box, sometimes it will reconnect and aometimes not. Str, I also noticed after 80 updates or while on-site boot it takes about two minutes and the screen flash several times while loading where for a while. ?

    samy23244,
    Here is information on how to start using safe mode with networking: Advanced startup options 
    You can also try to boot your PC and test.  You must check with Norton on the way to disable their software while you test.  You can even get the Norton removal tool from Norton, then uninstall\re - install Norton.  I think the 'status' Tucker C was referring to the status of your Internet connection with Norton is disabled.   Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I have a problem my Photoshop CC 2015 connection.  I have disconnected and connected but still fail.  Help, please. Thank you.

    It happened over and over again.  Please help me, thanks.

    Hello

    Please see the below help documents:

    Applications creative Cloud back in test mode after an update until 2015 for CC

    Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

    Kind regards

    Sheena

  • The mouse keeps disconnect

    Hi everyone, after upgrading my MacBook Pro (retina, 13 inches, early 2015) to OS X El Capitan my Krom Kull guard mouse disconnect randomly, this happens on both USB ports. T

    It's problem is really annoying you know a fiz for her?

    Have you tried a SMC (reset of the controller of the steering system (SMC) on your Mac - Apple Support) and reset NVRAM (How to reset NVRAM on your Mac - Apple Support)?

  • Sculpt Touch Microsoft Mouse keeps disconnecting under MacOS

    As the title suggests, continues to lose the Bluetooth connection constantly while idling, not. Reconnects sometimes alone, other times only by changing it power.

    There is no software to control or change all the settings for the Mac OS.

    Someone knows what to do?

    Hi Jorge,.

    I would say contact Microsoft hardware support team for further assistance on this issue.

    Consult the following link:

    How to contact Microsoft if you have questions about your hardware device

    http://www.Microsoft.com/hardware/en-CA/support/contact-us

    You can also check with the manufacturer of your computer. Consult the following link:

    https://www.Apple.com/ca/support/Mac/

    Please keep us informed on the status of the issue.

  • The mouse keeps freezing and disappear in Windows 8

    I got a new computer for Christmas, I started with a HP with windows 8 and took it back because the mouse could freeze or disappear, so I exchanged it for a Toshiba and it does the same thing! How can I stop it?

    Anyone with this problem, the tab using the arrow keys or commands to navigate. Reach:

    Control Panel; devices; mouse; device settings (maybe a small red symbol); and make sure that your touchpad is enabled by pressing on enter, then go to buttons, check the drop-down list with your touchpad. It should be the only one other than "other pointing devices.

    I hope this helped PS :): it could freeze a little every now and then depending on your computer, but his practice

  • iPhone 6 more Bluetooth keeps disconnecting

    Since last week, my iPhone 6 with guard disconnect from my car. My never had no problem before that - works perfectly fine for over a year... Currently on iOS 9.3.1. Were also of the view that during the phone became unresponsive when you go to applications, settings, etc..

    Remedies?

    Thank you

    < published by host >

    I also have this problem with my iPhone 5 but not with my 6 s more.

    I usually go to Bluetooth in settings and try to disconnect and connect to Bluetooth.

    Before turning on Bluetooth play a song in the music player & turn on Bluetooth and connect the phone

    These works of methods for me!

Maybe you are looking for

  • ItunesU videos won't play on IPad.

    Course downloaded from ItunesU audio files on ipad but not play videos. Any ideas?

  • Epsillon (electrochemistry). DAT want to tracing of data output

    I am using electrochemistry Epsillon material.  The output is a. DAT file (which can be read as text in Notepad).  I want to know if someone can help me to have LabView read the desired direction. DAT, take the 2 columns of data and output field.  It

  • (Redirect) DEll Inspiron 3537 starts do not

    I created a partition of my Dell Inspiron 3537 & when I tried to reboot it is not commissioning. Only a Dell logo is displayed and an error message appears on a blue screen. Is it possible that my HARD drive is crashed? Or is it possible first to eit

  • HP Laserjet P1006: HP shows not all drivers for my P1006 10 Windows

    My Laserjet P1006 won't work now that I'm using windows 10. HP does not show that they have new drivers for my P1006. HP comes out with the new drivers.

  • new win 7 ultimate from amazon

    bought a brand new unopened windows 7 ultimate Amazon settles very well... won't turn on stating that it is the blocked activation key? don't check windows real profit says that it is an original complete version yet recognized custom always activate