iPhone 6 more Bluetooth keeps disconnecting

Since last week, my iPhone 6 with guard disconnect from my car. My never had no problem before that - works perfectly fine for over a year... Currently on iOS 9.3.1. Were also of the view that during the phone became unresponsive when you go to applications, settings, etc..

Remedies?

Thank you

< published by host >

I also have this problem with my iPhone 5 but not with my 6 s more.

I usually go to Bluetooth in settings and try to disconnect and connect to Bluetooth.

Before turning on Bluetooth play a song in the music player & turn on Bluetooth and connect the phone

These works of methods for me!

Tags: iPhone

Similar Questions

  • IPhone 7 more Bluetooth Subaru

    I just upgraded to 6 s iPhone more to more than 7. I was always able to talk on my phone via bluetooth in my Subaru Outback 2014 so far.

    Apple told me that Subaru needs to update their software drivers, Subaru is to tell me that Apple needs to get to a software update. I'm still able to play my music on my phone if bluetooth, simply not talk on the phone. Does anyone have an idea or if there will be a software update?  Thank you!

    I have the same problem.  My iphone 6 with running iOS 10.0.1, calls bluetooth worked well in my car on my Kenwood DNN992.  I upgraded to 7 more running iOS 10.0.2, bluetooth music works very well, I am able to use the phone on the car, BUT the bluetooth connection will fall and connect constantly unless I'm hanging up on my phone.

  • HP ENVY 15-k001nc: mouse Bluetooth keeps disconnecting windows 10

    Hi I tried to solve this problem for months. I got it before the big update of Windows 10, but now the problem is back.
    Someone knows what you should do about it. A driver that works? I tried to update driver, do back, driver, generic driver, bluetooth support service, refusing the computer to turn off this device to save power on the adapter bluetooth and Wi - Fi, and so on. But the mouse keeps always disconnect even in the middle of working with her.

    I've updated 10 64-bit Windows.
    Adaptor Bluetooth Broadcom 43142 4.0 14.07.2015 12.0.1.689
    HP mouse Bluetooth X4000b 21.06.2006 10.0.10586.63
    Broadcom BCM43142 802.11 bgn adapter Wi - Fi 02.07.2015 7.35.275.2

    Hi, thanks for your response.
    It seems that the problem was with the batteries
    Today, the bluetooth mouse worked for about 1.5 minutes, after turning the mouse market again for 15 seconds and then nothing. I measured 1, 5V AA batteries and they had just 1V.

  • Beats wireless keep disconnecting from my iPhone

    Update my iPhone to 9.2.1 and when I use my wireless of beats, they keep disconnecting from my iPhone! I've already updated my beats and reset them, but it still happens. Any way difficult?

    HI Monroy,

    good reading this thread, it may be interesting: Beats studio guard disconnecting wireless

  • iPhone 6 more incompatible touchscreen

    My iphone 6 more touch screen does... to do anything on any page apps, lock screen, home screen, etc. If I keep trying eventually will respond. Usually, it will do good to stop, but that does not work as often and increases the frequency of the time does not. Buttons works fine.

    I had a similar problem that began almost immediately after the update to my iPhone 6 more for iOS 9.3.2.  Touchscreen met intermittently. Tried several resets, sometimes on what they worked sometimes immediately, the screen remained unresponsive for hours no matter what combination of buttons I pressed.

    Thinking it was a problem of related to the 9.3.2 software upgrade, I registered try the beta version of 9.3.3.  After you have installed the beta version 9.3.3 the screen worked normally - I thought that was the end of the problem.  I was wrong - the next morning that the touchscreen was once again does not.

    Took the phone Mac (No Apple Store) store and talked with the technician.  He suggested a "re-seat" of the touch screen and the connectors.  Since my phone is under warranty I thought I had nothing to lose. Technician removed from the screen, disconnected and then re-engaged connectors 4 Ribbon (which attach the touch screen to the back plate of the phone) (they are located in the top right of the touchscreen).

    The repair took about 7 minutes to complete.  Technician of nothing.  Phone has worked perfectly since then (48 hours up to now). Theory of the technician is that the models 'plus' are particularly sensitive to slight twisting/bending of the frame due to the larger size.  Finally any decline may work loose contact causing an intermittent function of the touch screen. Looks like a plausible explanation.  The repair seems to have worked for my phone.

  • My iPhone 6 more and my iPad 2 Air Show my OLD apple ID

    My iPhone 6 more and my iPad 2 Air Show my OLD ID apple on the screen.  I changed to my new ID iCloud.com some time ago. All that it is correct. How can I get my Apple OK to be on my icloud on both devices screen ID? Also I keep getting asked old ID password. It's really bugging me.

    I should add that when I press my iCloud ID, the next screen has the right pair. Weird

    Thanks for any help!

    IOS 9.2.1

    Post edited by: CissyBrazil

    You have disconnected from the 'old' Apple ID and then insert it again? You are able to enter the password of the Apple 'old ID '?

  • Error of GPS in the iphone 6 more after upgrading to ios 10

    After updating my iphone 6 more iOS 10, the gps signal was missing, when I try to disable and enable the iphone you location is bloked, before the update that the gps is working properly. Can correct this feature in relese next IOS? Thank you very much

    Hi Chicojander,

    I understand that you have difficulties using your GPS on your iPhone. I know it's important to be able to easily know where you are located, so I'm happy to help you.

    Looks like you've already got a good start on your troubleshooting of switching location Services. On top of that, look at the troubleshooting we offer here:

    Get help with maps - Apple Support

    If you do not find your current location on your iPhone, iPad or iPod touch

    1. Go to settings > privacy > location Services and to make, of course, this location Services and maps is set while it helps.
    2. Make sure that you set the date, time and timezone correctly on your device. Go to settings > general > Date & time. If possible, use the value automatically.
    3. Restart your device.
    4. Make sure that the cellular data or Wi - Fi turned on and that you have a connection active.
    5. Try another location or switch to another Wi - Fi network.

    Location-based services using GPS, Bluetooth, crowd-sourced hotspot Wi - Fi and the cell towers to determine your position. Learn more about The location Services on your iOS device.

    Thank you for using communities Support from Apple. See you soon!

  • El Capitan to 10.11.6 now airport Time Machine keeps disconnecting update

    I've just updated El Capitan to 10.11.6.  Now the airport Time Machine keeps disconnecting. Any suggestions?

    Time Machine is a software on your Mac, which is used to save the contents of your Mac (s) at an airport Time Capsule.

    An Airport Time Capsule is a wireless router with a hard drive built-in, designed to store backups Time Machine of your Mac (s).

    With this in mind, could you give more details about the problem you are having?  Disconnection from the airport Time Capsule or disconnecting from Time Machine?

    Do you get any error messages? If so, what exactly is the message that you receive?

  • iPhone 6 more screen flashing and does not

    Hello

    For the last few days, my iphone 6 more screen starts flashing from the top and the touch screen doesn't respond. The phone is still under warranty.

    I went to apply here authorized service center in Singapore, they have looked at my phone and said, there is a slight inclination in the phone which will be considered physical damage where it can not be repaired / replaced under warranty, I have to bear the cost.

    Now, as I read on the forums, this is a problem of very well known with the iPhone 6 Plus, also, I don't see no noticeable turn in the phone of my eyes. I'm sure that this issue is not because of any physical damage, but as a result of an internal manufacturing.

    I'm really disappointed with the service of Apple. I don't know what to do now. Should I try to go to any other authorized service center and see what they say?

    Any advice would be appreciated,

    Thank you

    Rohit

    I started having the same problem with my Plus 6. I took it to the Apple store today and the tech told me that it is a known issue that they see a lot. They hope that Apple will issue a recall notice. My phone is out of warranty, so they would be out swap with a unit refurbished for $329. The real kicker is that he said that they have the same problem with a lot of devices refurbished right out of the box. My options are to keep a phone that keeps flashing and does not or pay $329 for a replacement who may have the same problem that has my current phone. It's really bad assumption of a product!

  • iPhone 6 more iOS 9.2.1 freeze intermittently on the lock screen and using the iPhone.

    My iPhone only more 6 freezes sometimes without reason. Probably, it will freeze as I write this, and I'm very frustrated because my fairly new phone becomes useless when it freezes.  I use the latest versions of iOS and ITunes and I have backed up my IPhone to iTunes and ICloud. I don't want to restore my iPhone because I'm sure I'll lose information and things that I paid a lot of money for. I'm fairly certain it's a software problem, because my iphone is impeccable and I have always used a case Ive had the phone for a while. Clear all the settings while keeping my info seems to solve the problem for a day or more. If the iOS software is the problem I can't really trust your other software that works well to keep all my important data. I realize there is no way to back up apps on iTunes more because you're trying to get people to use iclould. How about I pay you guys $0.99 per month and I would like to back up my data on my computer and purchases in less time. I am a legitimate customer and I do not need to be treated like a criminal. What is the point of upgrading hardware and software of the iPhone when your software has created a problem and it won't solve the problem without erasing all the data on my iphone. It's not really give me confidence that the things I bought are things that I have in fact or the software release you works really well. If you want people to upgrade their iPhones every year why you put through all these hassles? Can you guys just fix your software please?

    Even! I feel its been happening too much for me! Do you think it is the system or a virus, the phone can have?  It also freezes when im using my phone. I can't use any other cause of apps that it freezes as well and I have to reset it and I take care of my phone as well! I need answers.

  • LR mobile do not synchronize with the iPhone 6 more

    Just bought the iPhone 6 more and downloaded the LR app on the new phone.  It shows the synchronized collections and has a dark spot for every picture in this collection, but there is no pictures and no charge. I think that checked all the settings to enable them.  what Miss me?

    Never mind... I was disconnected (e) mobile LR on my laptop. Everything works fine again.

  • ESX 3.5 U5 not answer and keep disconnecting

    Hello!

    I have a HA/DRS cluster of two ESX 3.5 U5 at remote site. The uplink is not the best but it is . The problem I have is that keep disconnecting from the host...

    I don't know where to look for more... can you guys have ideas.

    TNX

    You may want to increase the timeout in vCenter, to see if that helps

    http://www.yellow-bricks.com/2009/02/11/increasing-the-time-out-within-vCenter-for-remote-ESX-hosts/

  • iPhone 7 more telephoto camera does not

    Is anyone having problems with iPhone 7 more telephoto does not activate. I'll go to the camera application and press the 2 x zoom feature, but it appears to be not to activate the camera of 56mm at the front. I cover the lens with my finger, the camera on the right side and the iPhone always displays an image despite me concealing one of the cameras teo. I can't activate the second camera. It seems to only be zooming digitally. I'll do this outside and he'll only digitally zoom when I hide the second lens.

    Im having this same problem. I heard from someone that he could not work until the next software update... but I have no idea and have not found anything in the online help. If someone else gets to know how.

  • is it possible to buy the iPhone 7 more unlocked and without a subscription which will work in Russia

    My friend is going to go to New York for the holidays of the maintains 21 October to 31 October. And I really want to buy the iPhone 7 more 128Gb it. I know that I need a free sim card or without a contract. I asked best buy about this and they said they don't sell iPhones with contracrs. Is this possible?

    Thank you.

    Apple has not announced when they will start to sell the iPhone Unlocked 7.

  • IPhone 6 more flashing screen

    After updating my iphone 6 more with ios10, the start flickering from the top screen and the buttons does not. stil phonse looking again, does not fall and there is not a single crash. It has already expired the warrently, I understand that there are a lot of people the same proplem faceing. We can hangout or Exchange the phone to Apple.

    Hello

    First consider trying the following steps:

    If the problem persists (or if you prefer to skip this step), contact Apple support (mail service may be available) or make a Genius Bar reservation in order to have your iPhone verified and, if recommended by Apple, served:

Maybe you are looking for

  • Agilent 33250 has synchronized with DT9812

    Hello everyone, I'm trying to control two devices (Agilent 33250 A and card DAQ DT9812) synchronizedly using LabVIEW.I need excite a transducer using an arbitrary waveform generated by 33250 A burst mode with its frequency swept KHz x to Y KHz with a

  • need to set up an e-mail magic jack VAC.

    need a form for my magic jack VAC.

  • Unable to read file created with Windows Photo Story 3

    Photo Story 3 I created a story about photo story 3 and saved. However, when you want to read a message reads "a device attached to the system does not work. Help - does that mean?

  • Diagnostic test Exchange fails with 'Quest remote command does not work.

    I configured vFoglight and monitoring Exchange in a lab. When I run the diganostics Exchage test I get error "Quest romoting command does not work. I made sure that the agent's account "RUN as Service" applied.  Any ideas as to what may be causing th

  • How to map a network switch manually

    Hello I have a Data Center remote I'm trying to draw, without visiting the site and the tracing of cables. Because I can access the table of addresses on each switch, what is the best way to know if button A is connected to the switch B? the switches