mouse pad problems

My stack of mouse and clicks left taps are often very slow to respond.   Tap-tap-tap, no answer. not left click also no response I have reflected on the mouse settings, but could not find a solution.  Sometimes the mouse pad works as it should, then periodically, it slows down.  How can I fix?

Hello
  1. What is the mouse model number?
  2. What version of Windows are you using?
You can view these methods:
Method 1:
The problems with the mouse button or scroll the parameters
Method 2:
Uninstall and reinstall the mouse & mousepad from Device Manager driver, follow these steps:
(a) start Control Panel, click hardware and sound and then click Device Manager.
(b) to expand the node that represents the type of device you want to uninstall, right click on the entrance to the unit and click on uninstall.
(c) in the dialog box confirm the device removal, click OK to start the uninstall process.
(d) when the uninstall is complete, the site of the factory driver download and install the drivers.
(e) after installing the drivers, install the latest updates.

Tags: Windows

Similar Questions

  • I have a Dell XP laptop with mouse pad problems.

    I have a Microsoft Wireless Notebook Optical Mouse 3000. It would be a good solution and how do I install it. I can't find anything about compatibility. No matter what I click or try, I still just have sent Windows 7 info.

    I have a Microsoft Wireless Notebook Optical Mouse 3000. It would be a good solution and how do I install it. I can't find anything about compatibility. No matter what I click or try, I still just have sent Windows 7 info.

    You have two separate issues.

    You do not explain what are your "mouse pad problems", and because you didn't also determine which laptop Dell model you have, I can't give you specific advice.  Take a look at the following page which, although specific to the laptop computer Latitude 131 L, applies to your touchpad as well. http://www.support.Dell.com/support/topics/global.aspx/support/DSN/en/document?&docid=361927

    If you want information specific to your laptop, go to Dell support and enter your service tag, then search for answers using the keyword "touchpad".

    If your touchpad hardware is actually dead, or if you want to use a mouse instead of the touchpad, the Microsoft Wireless Notebook Optical Mouse 3000 is a reasonable choice.  If you just plug the transmitter into a USB port on your computer and turn on the mouse, it should work without needing to install anything (you may need to reset the transmitter and the mouse buttons to reset on each device).

    If you want to "features", download the software IntelliPoint here: http://www.microsoft.com/hardware/download/DownloadResult.aspx?category=MK&type=Mouse&name=BX3-00008&os=XP_32&lang=en

    He is the main support page.  Use the drop down lists to select your model and operating system:http://www.microsoft.com/hardware/download/download.aspx?category=MK&type=Mouse&sku=B2J-00001

  • Mouse pad problem

    Hi, I have a HP Envy 4 - 1030US ultrabook and lock my mouse button does not work, I can always click on the point, but when I want to type an essay and lock my mouse pad, it does not work. I really need help

    Hello

    First of all, download driver Synaptics relevant of links below and Save tgis setup in your downloads folder.

    Synaptics Installer - Windows 8.

    Synaptics Installer - Windows 7.

    Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

    When this has completed, restart the laptop.

    When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

    You may now set the different options you need - see the following document.

    Configure the ClickPad.

    Kind regards

    DP - K

  • Pavilion laptop: Mouse pad problem

    I want that my mouse to move while I type. Because I'm playing somegames that force me to move my mouse and using the WASD keys. How can I change?

    Hello

    You can change this as follows.

    Open windows control panel and on the top right, next to the display by: select "large icons".  In the new page layout, select the entry of Synaptics.

    The hardware/software version will depend on real option that you're looking for (see the example below), but it is usually called 'check' Palm or Smart Sense'-disable this function and apply the changes.

    Kind regards

    DP - K

  • Problems of L50 - B - 02 L satellite with mouse pad

    Hi all

    My two week old Satellite L50-B02L giving me problems with the mouse pad. Sometimes, when I do a right click, he enrolled as a 'left' normal mouse click. For example: when I want to do a Google search and to open a link in a new tab, I right click the mouse on the link and select in the window that opens. But occasionally comes to open the link, as if I just normally clicked it. Even in Excel when I want to right click on a cell to change the content. Just, it selects the cell as if I clicked "left".

    And with sometimes I hear happen all the time, but it is certainly NOT a bad click. It happens a few times in a row and all of a sudden I can right click again.

    ... Any ideas on that? I have already looked through the settings of mousepads etc but found nothing that could solve. I have not updated any drivers or anything yet (no idea how to do this).

    Thanks in advance!

    Anna

    Have you tried to set the touchpad 'by default' settings.

  • Qosmio X 870 - mouse pad does not work properly

    Hello

    My mouse pad is facing upward and I don't know why. It works when I restart the laptop, then after a few minutes, it does not at all. I checked the properties in Device Manager and it says it works properly... which is not the case. I uninstalled the driver and reinstalled. He always does.

    Not sure if this is related to some of my key of F does not not to my other thread - https://forum.toshiba.eu/showthread...ns-not-working

    A question I've had for a while (which may or may not be related) is my TOSHIBA x 64 compatible ACPI logical value and general-purpose device has a problem. On the device manager says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ». I uninstalled and reinstalled this with driver Toshiba utility pack and it always happens with this error. I cleaned the registry several times using tuneup utilities 2013. It is probably not bound as it has been like this for a long time with no obvious side effects. But it's annoying nevertheless.

    Maybe windows 10 could save the day (I'm on the 8.1). I hope. In the meantime if anyone has any suggestions I would be very happy.

    Good, someone else who might find this is useful - it turns out that it was a hardware failure. My laptop hinge was loose, and therefore the case had to be replaced. He also replaced the mouse pad - now it works fine.

  • Mouse pad does not work properly

    I bought my laptop toshiba 2 moths ago, but yesterday, my mouse pad no longer works correctly.

    I can still use it to move the arrow on the screen but cannot use it to doubleclick on something else.
    I need to use it in conjunction with my left hand button which is very frustrating.

    I was wondering if anyone had any ideas how to solve this problem, thanks

    On this virtual path, it is not easy to understand what is the problem there. It is not easy to tell if problem described is related to the touchpad software.

    Try to do system restore and roll back the OS a few days back and check if the same problem persists.

    By the way: which laptop model you have and what operating system are you using?

  • Satellite L775 - mouse pad does not work properly

    I have a laptop Toshiba Satellite L775. I run Win 7 Home Premium. My mouse pad does not work properly. I also have a Logitech Anywhere MX wireless mouse. I tried the mouse pad to work properly with the key FN and F9, but it does not work. And you really have no idea if that turns or out of the mousepad anyway, subj for another time I guess.

    What does not work, but I have to do is to go to Control Panel then mouse option load that and just scroll the tabs without changing what each time and then close and the touch pad works. But only for this session. If I have my laptop nearby, or turn it off, I have to start throughout the whole process.

    What's past and how to fix this?

    Thank you very much.

    > What's past and how to fix this?
    After reading your ad, I still don t know what is your problem.
    > My mouse pad is not working properly
    How to understand this? What does not work properly? What happen exactly when you start your laptop?

  • The mouse pads, the Satellite Pro C660, do weird things

    Hi guys, I have a Satellite C660 Pro who has developed a weird problem

    When the laptop has been for some time, the mouse pad will start scrolling and horizontal scrolling when I do not want to control the cursor of the mouse almost impossible until I restart, then it works very well for anywhere between 20 minutes and a few hours before it goes nuts new

    I tried to update the drivers, I also tried to disable the ability of mouse pad to scroll or do anything other than to be a mouse pad, but this does not seem to have changed anything

    any ideas out there?

    Have you also tried updating the BIOS?

  • Mouse/mouse pad does not work on my Satellite M30X

    Hello

    I started having problems with mouse pad & mouse on a Satellite M30X. By clicking on the icons on the Desktop gives erratic results as evil etc start application and does not. The operating system has been reinstalled with a new hard drive and put BIOS up to date without success.

    Looks like maybe the motherboard has everyone seen elsewhere... and have the solution.

    At soon Scottie

    Hello

    tried with a few external mouse/keyboard? If it is not already then try and check the what happening. In both cases I suggest to contact a local for a hardwarecheckup servicepartner, because your question seems serious and cannot be resolved with software, DO-IT-YOURSELF tips or things.

    Here´s a link to find the nearest servicepartner in your country:

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

    Would be better to let a few technicians do their work ;)
    Welcome them

  • HP ENVY 17: Mouse Pad restore default settings on reboot

    Since the upgrade to Windows 10, my settings click pad mouse pad restore settings by default whenever I restart my laptop. It's incredibly annoying. Please can someone HP actually solve the problem? I've tried everything. I even contacted Microsoft who said that HP should provide a fix for this or work with their supplier of cushion click to do.

    Ahhhh!

    Hello

    Try the following.

    Hold down the Windows key and press R

    In the run box, type regedit and press enter

    In the registry editor, navigate to the following

    HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

    Inside, look for a key named DeleteUserSettingsOnUpgrade

    If it is present, right click on the key and select Edit

    Set the field data of the value 0 (zero) , and then click Ok.

    Close the registry editor.

    Make the Synaptics setting changes you need in the usual way and save them, and then check if they are now kept after a reboot.

    Kind regards

    DP - K

  • HP Envy 17 Notebook PC TS: Mouse Pad question

    I have a HP Envy TS 17 laptop that had problems of pad mouse for awhile.  The mouse pointer will be to randomly jump up to a point on the screen and click on the update jumps out to what I currently work with.  It makes it really hard to use and work with laptop.  I tried to play with the drivers and settings of mouse pad, but nothing works.

    I tried to start a conversation with HP support, but get this message: "this product is is more served by HP." You can search for possible solutions on this Web site. ".   I don't know what that means, because the laptop is still under warranty.  Y at - it an email address where I can contact HP support on this issue?

    @markcloutier121

    I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).

    If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.
    Thank you for visiting the Forum from HP Support.

  • Equium A300D - question about light mouse pad

    Hello

    If someone could help, it is not so much a problem, but I recently bought the Equium A300D and there is a band of light above the mouse pad that are turned over.
    I don't know if I turned it off in some way or how to turn it on, just kind of hoping that someone might be able to help.

    Hello

    Thanks for the comments.

  • Satellite A300D - funktion scroll Mouse pad does not work

    Hello
    I use a laptop A300D - 16 c. I have a problem with the mousepad wiered. The right side of the mouse pad, which is used to scroll the page, stop working. This has happened several times and very often. But I am not able to trace what exactly causes this problem. Whenever he stops working, there are different activities.

    A reboot of the system will not solve the problem and it will start working again. But I couldn't find the exact reason for the problem.

    It is very annoying, we the scrolling feature will stop working. All parameters of this mouse pad are the same and has not changed.

    Anyone know this problem with A300D and have a solution?

    Please share it with me.

    Thank you
    Méhul

    Hello!

    It's not easy to say what the problem is, but you should do an update from the touchpad driver.
    You can download it on the Toshiba driver download page:
    http://EU.computers.Toshiba-Europe.com

    Furthermore, you have the problem only with the keyboard or an external mouse too?

    Good bye

  • HP Pavilion 15 laptop: cannot depend on mouse pad

    My child turn off my mouse pad, and I can't seem to turn his back for more than 2 months, I checked for solutions online, but nothing works, I tried to install new driver, but without success

    Hi @akinboboye007,

    Thanks for getting back to me with the product number.

    tryt after step of the document for computer laptop keyboard troubleshooting (Windows, 10, 8).

    Please keep me informed of the progress of things.

    If you need help, let me know and I will gladly make all that I can to help you.

    Please let me know if that solves the problem by marking this post as "accept as a Solution.
    To simply say thank you, click the Thumbs up below!

    Thank you.

Maybe you are looking for

  • MacBook 2008 El Capitan or Mavericks

    I buy a refurbished Macbook 2008. This is a screen of 13.3 "with 2.4 GHZ. I have a selection of El Capitan, Yosemite or Mavericks. Should I go with the Mavericks or El Capitan? I have a friend who has upgraded to El Capitan with his 2008. I also hear

  • MacBook Pro hangs (black screen). How can I fix it?

    Hello! I have a MacBook Pro 15', with the 10.6.8 System. About 1 year and a half, the screen started to turn black from time to time - quite often in fact - and I need to restart the computer. He stopped for a while when I spent of Chrome for Firefox

  • Satellite P300-1gn starts up it free or by touching the Mute button

    My satellite P300 1gn starts that it self.It starts also toutching the Mute button or button CD (they are part of the extra of the enlightened next buttons set the power button. Is it possible to disable these keys additional lluminated? I wonder tha

  • Traditional vi help

    Hi all I'm doing a school project and I worked on a vi to measure the phase difference in an RC circuit. I excite a sine wave to approximately 2 kHz of LabVIEW. I then measure the output with two analog inputs to the terminals of the resistance. Ther

  • need to read siemens S7 i/o in labview via Modbus/TCP

    Hi friends, We are developing an industrial project and facing a scenario in network as follows... Abt Project brief Its a treatment to the sweage plant. We use the NOR-PAC and Labview version: 8.5.1 for process control. We got a few 3rd e/s Party wh