move the print queue to another printer

Similar Questions

• How can I move or move the 'Show desktop' to another location in my taskbar?

  Original title: I am running Win 7 pro - 64 bit. How can I move or move the 'show desktop' to another location in my taskbar?

  I'm running Windows 7 pro 64 bit on a Lenovo Thinkpad T520. Any suggestions on how I can move or move the 'show desktop' icon in my taskbar. Please note that this already exists on the right side of my taskbar. I would like to add it or move it to the left side.  Thank you

  The only way next to what has been offered, is if you put the taskbar on the left side of your screen instead of the lower part.

  Right-click on the taskbar and select Properties, the options are there.

• Move the Users folder to another drive or partition under Vista 64

  I want to move my full users folder to another drive or partition under Vista 64-bit.

  I found these instructions to do with Windows 7 and confirm that they work very well on a Windows 7 computer I set up yesterday.
  http://Lifehacker.com/5467758/move-the-users-directory-in-Windows-7
  ROBOCOPY, RMDIR, MKLINK programs all exist in Vista and have all the command line switches such as specified in section of Windows 7.
  I want to use junction points as described in the article, rather than messing around with search-and-replace in registry. The use of junction points is cleaner and easier to reverse if I ever need to move the Users back folder to its original location.
  These same instructions for Windows 7 works with Vista 64 bit to move my users folder to a different hard disk or partition?

  Well, I couldn't wait any longer for a response.

  So I gave him a test and Windows 7 instructions work perfectly with Vista 64 - bit word. Hope it will be useful to someone else.

• I can't get my computer to work when I move the NIC wireless to another PCI-e slot.

  I bought a new graphics card for my desktop computer (e9220f HP Pavillion, MOBO H-RS880-Μatx ALOE), then when I tried to install it I noticed he had a profile higher than my last card and would require the displacement of the interface (p/n 502300-001) WLAN card to the PCI-e slot x 1 higher following. The problem is that when I did that I would get the start screen initial followed by a black with a half inch Bright screen multicolored in the form of a toothpick or a model, (green light with metal lines) run through a quarter of the screen there are 3 of these slots PCI-e x 1 which look identical to each other. Why can I not move the device map local network without any problem? Help, please...

  If you can live with it in 'only the lowest PCI-e x 1 slot work.'  Then the big.  If you have to have in another location, then maybe try a USB wireless adapter led.

• Expand or move the virtual machine to another partition / hard disk

  I tried to expand my 90 GB disk but nothing changes, i.e. the virtual machine is still to 60 GB. I have VMware Fusion 6 (Mac/Windows 10) and my VM is monolithic mode. In this true HD, I even 50 GB free and I can't increase the amount again in an attempt to rectify this problem and I can not to decrease either. I thought to change the location of the virtual machine to another partition/hd with more space, but I don't know how. So I need little help to choose and implements one of the solutions below:

  - or regularise space for the new amount

  - or move the virtual machine (vmdk) to an another partition/HD

  - or to convert monolithic mode to 2 GB split

  What is the best solution?

  Thanks in advance

  It's help me;

  Resize a Windows Partition with disk management tool

  When you maximize your virtual hard disk, you must also expand partition of your guest operating system to take advantage of the extra space.

  Fusion resizes the partition of the guest operating system when you resize the virtual hard disk. If you hold the Option key when you click apply to resize the drive, you can manually resize the Windows partition. For Windows 8, Windows 7 and Windows Vista you can use the operating system's disk management tool to resize a partition.

  Prerequisites

  Check that your virtual hard disk is large enough to accept the increase in the size of the partition. See resize a hard disk.

  Procedure

  1 right click on computer and select Manage.

  2. double-click on storage.

  3 double-click disk management.

  4 in the list, right click on the partition to expand and select Extend the Volume.

  5 follow the prompts to resize the partition and click complete and the question of the partition in the disk management pane displays its new size.

  6. close the computer management window

• Move the physical disk to another server ESXi

  Hey guys,.

  I copied a virtual computer to another physical disk on my ESXi server.

  Is it possible to take the disk and move it physically

  Another ESXi machine and see the data existing on the second ESXi store

  Server?

  We were doing the initial test on a test machine. Now I want to move the virtual machine to a server better

  with a raid array. I know that I can use

  SCP, but I prefer not bogged down my network file copy 100 gig.

  When I physically move the disc I can see on the second

  machine. But I don't know how to add it in

  storage. When I use the wizard, I get a

  WARNING: it will wipe the data.

  Thank you

  Should be possible, but you may need to activate volume resignaturing on ESXi in so he could see the new drive.  Search the VMware KB for "will esx" and you should be able to find an article that explains how to...

• You want to move the $NTUninstal files to another hard drive?

  Windows uses 9.8 GB to 40 GB hard drive, I can move all the files from $NTUninstal on another HDD to make room?

  Hi John726,
   
  Here's a similar post on this issue. Check if this may help you:
  equivalent $ntuninstal

• Move the layer setting to another file

  In Photoshop, is there a way to move a layer of setting to another file WITHOUT having to extract the files to the workspace on the side and drag and drop the layer?

  Layer > duplicate layer

  Edit: But even tabs you should be able to manually drag their course to another file. Could you please post a screenshot to illustrate your question?

• Cannot move the virtual machine to another host

  Here's the situation... I am running 3 ESX 4.0 host in a cluster and I upgrade the memory on these hosts.  I put one day and now I want to use vmotion to move a virtual machine to host more memory, so I can then turn off host 2 to add more memory.

  When I try to migrate the computer to another virtual host he said "the virtual machine must be powered down for that purpose."

  I did it before with success when I first created this group with the HA and DRS settings are enabled.

  Now, I can't do this and I don't know what setting or what changed to cause it to not allow me to manually migrate a virtual computer on one host to another.

  If I wanted to put an ESX host in "Maintenance Mode" thinking that it will automatically move all VM for 2 other hosts in the cluster is not it either... I get a message saying that ' a host into maintenance mode does not any virtual machine functions... blah... blah... and continues to complete the entry into maintenance mode, all virtual machines must be closed or moved to another host. "  Manual intervention may be required.

  Again, I think that if a host is down these VMs would be move... that of the whole point of a cluster but doesn't seem to put in maintenance mode to allow them to go unless I turn off the virtual machine

  Any ideas?

  Go is one of the requirements of vMotion. The message after you had corrected the condition, I'm sure would be erased after awhile.

• Move the text block to another Page

  Hey,.

  I'm new to InDesign scripting, and I've been browsing the docs for quite awhile, but can't find how to move a block of text to another page.

  The closest I came was a .parentPage, but it is read-only.

  I have my frame on the first page of the document, how can I move, let's say, on page 5?

  myFrame.move (myDestinationPage)

  Substances

• Move the mail folder to another internal HD

  2 questions

  FIRST

  I use an SSD as a boot and I try not to fill it with files and its constant use

  Can I move my mail folder and others if necessary, the user library and place an alias pointing to the new location instead

  I know that it is impossible for the virtual memory, but what of the rest? If located same applications to start the drive others don't work...

  The SSD is the only one with a system, all the others are just for data

  My Mac is a MACPRO 4,1 2009 with 32 GB of RAM and a NVIDIA card for my second screen

  SECOND

  I tried several times to post a link on this forum using Chrome, but I could not get into the question for some reason.

  I am quite experienced with Apple software I have used their products for the Apple]]

  I had no problem with Safari instead,

  I do something wrong or this is some kind of Apple's policy?

  Thank you

  Tip: Create a lean, fast boot disk

  .

• Move the RAID5 array to another server

  Had a RAID failure on an old PE2850. looked like two disks of default at the same time, which makes me suspect the PERC, not drives - especially because I moved the disks as a unit to another PE2850 and was able to mount it as a second table RAID (the new server OS on disk RAID1 disks 0 and 1, this table 2-5) and he acknowledged the table.

  However, I can't mount a Windows partition.  I start the operating system on the new server and Disk Manager recognizes there is a drive, but I can't use it unless I format it, who will become the object of all the activity, which is at this stage to draw sort of useful data in the coast of the Bay.

  Anyone can suggest a way to get this recognized by a new server table or card PERC or something?

  You would be able to connect to a PERC 4 controller, otherwise it will not recognize the VD.

  You could try editing under linux... sometimes that has a better tolerance (or the less different) for corrupted partitions/file systems. If the table of partition/filesystem is corrupted, you can also try the tools to try to fix it. If the damage is superficial, as they often work.

  You said that you had two disks fail... describe how you got the table online. It is important and can determine whether or not the other attempts to retrieve data are futile.

• Touch the touch screen moves the cursor appear on another monitor in a multi-monitor for Windows 7 system

  There are three 3 monitors on this system. Two of them are the screens LCD Dell 2407WFP-HC and one is the touchscreen Acer T230H. Dell monitors are connected to a NVIDIA Quadro FX3500 and identify as monitors 1 and 2. The Acer monitor is connected to a NVIDIA GeForce 7600GS and identifies as monitor 3. The system runs Windows 7 Ultimate x 64, with updates. Everything works fine except for the touch screen feature.

  According to the instructions I used the Tablet PC configuration to configure the touch screen. In the installation program, reports monitor 2 Dell incorrectly as having entered touch available and the Acer monitor 3 reports as not having NOT available - also incorrect enter key.

  When I touch the Acer screen, the cursor appears on the monitor Dell 2 and moves according to the movement of my finger on the Acer screen.

  1. Go to the control panel and search for "Touch".
  2. Click on 'The Tablet PC settings'
  3. Click on "Setup"... "right" configure your stylus and touch displays.
  4. Choose "enter." »
  5. Press the 'Enter' key until you see the instructions displayed on your actual touchscreen.  Tap the screen and it will say something like "press ENTER to move to the next step.

  You should now see your contact to events (and mouse) are displayed on the touch screen when you... Well, touch.

  Hope that helps.

• Move the video folder to another drive

  My C drive is full and I have a D drive, how can I move video folder on drive d.

  My C drive is full and I have a D drive, how can I move video folder on drive d.

  First make sure that your D drive is NOT a recovery drive, as is often the case today. If not, then:
  Create a folder on D: (not to call my videos) then right click on the video folder (NOT in library view), choose Properties, click the location tab, choose move and navigate to the created folder if you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• copy and move the address book to another computer

  I am wanting to update my address adsdress thunderbird on my trip computer which I haven't used for a year with the new addresses that have accumulated on my main computer last year.
  or if necessary replace the address book of trip computer with address book from my computer, all that works. Have windows 7. IOW I'm not migrate to a new computer, and I don't want to just replace everything on the computer to travel with the new files, I want to just the address book. It's ok, if it's a separate address book of what is already there, but it may be good to delete the old address book.

  http://KB.mozillazine.org/Moving_address_books_between_profiles
  Who should do it I think.