Moving to common members, Possible?

Similar Questions

• Firefox 5.0 said header-no-the track is moved, what do you mean, no option to activate-no-track more?

  What's new in Firefox 5.0 said that-not-Track header has been moved to increase the possibility to discover... This means that it would not be option to activate-no-track more? What this privacy of sacrifice? or it also means that you will be always localizable (in general or personally)? -Thank you.

  You can find it in another location.

  • Tools > Options > privacy > Tracking: "say I won't be the subject of a follow-up of web sites.

  The choice of the "-non-piste" won't that make Firefox sends a header HTTP specific (TSD = 1) on a web server.
  
  This is the server to do something with this request.

  • http://blog.sidstamm.com/2011/01/opting-out-of-behavioral-ads.html
  • http://blog.sidstamm.com/2011/01/try-out-do-not-track-HTTP-header.html
  • http://BrowserSpy.dk/donottrack.php

• Satellite A100-496 power plug problem

  Hi, my first post and this is probably a common problem.

  I got an A100-496 for about two years and it has been fine. Nothing special, just right.

  Although the pin power plug to the back of the machine became loose and therefore constantly moving the battery and possibly perform.

  I found any number of sockets of replacement for other models, but this seems rare.
  Can someone advise
  one) where I could get one at a reasonable price
  (b) if there are other models that use exactly this Jack
  (c) how it could be difficult to replace or
  (d) the question of whether I should just go out and buy a new machine (certainly not a Toshiba)?

  I would be very grateful for any advice and thank you in advance.

  Hello

  I think that the replacement of DC Jack is really complicated because it s placed on the motherboard and you will need to disassemble the whole laptop to gain access to decision-making.
  The disassembly procedure is not easy, that you know the right order and how to remove devices
  There is therefore a high risk of damage to laptop

  Anyway, you want to know what is compatible.
  Well, I recommend contacting the ASP in your country for details and the right part, the technicians should be abele to order this part at Toshiba.

  See you soon

• (El Capitan 10.11.5) MacBook Pro keeps freezing

  Hello Apple community. So my MacBook Pro freezes constantly and loading things very slowly. It freezes during 10 or minutes at a time, but other times, it is quite well. I recently wiped this MacBook and transferred to the demands of my old MacBook, which has never had these problems. Posted below is my Etrecheck.

  
  

  Problem: Beachballing

  Description:

  MacBook Pro constantly freezes and loading things very slowly. I recently wiped this MacBook and transferred to the demands of my old MacBook, which has never had these problems.

  Hardware Information: ⓘ

  MacBook Pro (15 inch, late 2011)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro8, 2

  1 2.4 GHz Intel Core i7 CPU: 4 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1333 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 92

  Video information: ⓘ

  Intel HD Graphics 3000

  Color LCD 1440 x 900

  AMD Radeon HD 6770M - VRAM: 1024 MB

  Software: ⓘ

  OS X El Capitan 10.11.5 (15F34) - since the start time: about an hour

  Disc information: ⓘ

  Hitachi HTS727575A9E362 disk0: (750,16 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) /: 748,93 (Go 703,33 free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk0s2 749.30 GB Online

  MATSHITADVD-R UJ - 8À8)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM2070 hub.

  Apple Inc. Bluetooth USB host controller.

  Computer, Inc. Apple IR receiver.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Configuration files: ⓘ

  /etc/sysctl.conf - file exists but not expected

  Guardian: ⓘ

  Mac App Store and identified developers

  Launch system officers: ⓘ

  [loaded] 7 tasks Apple

  [loading] 167 tasks Apple

  [operation] 50 tasks Apple

  [killed] 14 tasks Apple

  14 killed process lack of RAM

  Launch system demons: ⓘ

  [loaded] 46 tasks Apple

  [loading] 160 tasks Apple

  [operation] 72 tasks Apple

  [killed] 12 tasks Apple

  12 killed process lack of RAM

  Launch officers: ⓘ

  [failure] com.avid.ApplicationManager.plist (2016-03-20) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-06-13) [Support]

  [loading] com.microsoft.autoupdate.helpertool.plist (2016-06-20) [Support]

  [loading] com.microsoft.office.licensingV2.helper.plist (2016-06-11) [Support]

  User launch officers: ⓘ

  [loading] com.google.keystone.agent.plist (2016-06-17) [Support]

  [operation] com.spotify.webhelper.plist (2016-06-28) [Support]

  Items in user login: ⓘ

  Spotify application (/ Applications/Spotify.app)

  Other applications: ⓘ

  [ongoing] com.google.Chrome.65632

  [loading] 419 tasks Apple

  [operation] 136 tasks Apple

  [killed] 29 tasks Apple

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: 22.0.0.192 - SDK 10.9 (2016-06-17) [Support]

  QuickTime Plugin: 7.7.3 (2016-05-05)

  Flash Player: 22.0.0.192 - SDK 10.9 (2016-06-17) [Support]

  Default browser: 601 - SDK 10.11 (2016-05-05)

  3rd party preference panes: ⓘ

  Flash Player (2016-06-13) [Support]

  Time Machine: ⓘ

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 748,93 GB disc used: 45,60 GB

  Destinations:

  Hard drive EXTERNAL [Local]

  Total size: 319,73 GB

  Total number of backups: 1

  An older backup: 28/06/16, 17:47

  Last backup: 28/06/16, 17:47

  Size of backup drive: adequate

  Backup size GB 319,73 > (disc 45,60 GB X 3)

  Top of page process CPU: ⓘ

  Information system 25%

  6% Google Chrome Helper (5)

  1% kernel_task

  1% Google Chrome

  PS 1%

  Top of page process of memory: ⓘ

  696 MB Google Chrome Helper (5)

  Kernel_task 514 MB

  Mdworker (9) 238 MB

  115 MB Google Chrome

  Mds_stores 98 MB

  Virtual memory information: ⓘ

  115 MB free RAM

  3.88 GB used RAM (581 MB cache)

  33 MB used Swap

  Diagnostic information: ⓘ

  28 June 2016, 16:32:30 self-test - spent

  There are several things to consider:

  It is a five year old computer, problems are bound to happen sooner or later, so get ready to tha.

  First of all, you need to maybe bad RAM. Agents of the launch system, System launch Daemon and your virtual memory information imply that something is eating all of your ram. 4 GB is not much, but it should be more than enough unless it no longer works properly.

  My second comment would be the hard drive. Generally, a rotating disc is not a long life in a laptop, being pushed around when the laptop is turned on and was moving. It is possible that you have bad blocks.

  Thirdly, it could be your battery. Plain and simple, a dying battery.

  The best option at this point would be to make an appointment at the Apple Store and run an MRI (Mac resource Inspection) to detect what can go wrong.

• My browser is automatically upgraded to 29,0. Now, I don't have a refresh button. I have to type F5 to do this. Seems to each update that go you back!

  I visit a Web site. I need to refresh to load new content. Where can I find the button refresh?

  Should be seated to the right of the address bar, the default position for Firefox 4. Unfortunately, it cannot be moved as it was possible with Firefox 4-28.

• How to disable auto-complete and instant Google search functions

  Until last week, I have been successfully using http://www.google.com/webhp?complete=0 to disable the insistence of Google to force it to use the maddening semi-automatic research users and instant search functions (the option to disable the old has been removed by Google from preferences while the latter does not disable it in preferences).
  However, Google now seems to have beaten my first bypass of choice.
  Before moving to a last possible workaround, I was wondering if Firefox users were aware of all the others?
  So far, the failures are: *http://www.google.com/webhp?complete=0 *www.google.co.uk/firefox *https://encrypted.google.com/

  You are welcome

• Satellite C660 - 1 7: BIOS upgrade question

  Good day, fellow owners of Toshiba laptop.

  I have a little trouble updating my BIOS to a version more 'recent' (based on Tempro).
  I just installed the application Tempro, and it detected that my BIOS needs an upgrade, so naturally I downloaded the 'new' BIOS. Everything went well, but when I tried to install it, a message appeared in the window of installation:

  ' * The program will be closed! * There is an error occurred, please check the items below. The version of the BIOS above 190. Battery capacity more than 10%. AC is attached.

  No matter what I do, I get the same error over and over again. I looked the problem before I posted this thread and other people met there, but, unlike my case, advice like 'Close all background applications', "Battery Charge", or "Make sure that the AC is attached" really helped.

  I tried to close all my battery is always charged, as I rarely have to unplug the power adapter, and, of course, the problem of connection AC is not the cause because almost always plugged.

  I checked my BIOS version to + + msinfo32.exe and is 1.90 already, but I remember the upgrade this month (earlier) there, and if, in theory, I already have the latest version installed, why don't Tempro recognizes it and keeps alert me on a nonexistent problem?

  There may be something wrong with Tempro, but I just need to be sure before moving on to a possible upgrade.

  Can someone help me please?
  I thank in advance and have a nice day!

  Hello

  TEMPRO inform you on the new downloaded drivers or BIOS
  The European driver Toshiba page provides all the drivers and BIOS files and the latest BIOS version 1.90 - winner was transferred to 04.06.2012 and so you have received this notification by the Tempro software.

  Who knows why they have downloaded this file once more... but the fact is that your BIOS is up to date and so you can not update the BIOS once more to the same version.

• Connect a camera, camera not found in Device Manager? -Updated!

  I've had problems with my camera for a few months now. Yesterday, I got fed up and took off all my files and reset the computer. When I open the camera it worked for about a second, then come back onscreen "connect a camera". I use an ASUS Q200E with a built-in webcam. Given that I have restored the laptop, I was using windows 8, and when I tried to install updates before installing 8.1, which took an hour or two, they failed.

  When you go to the ASUS site I can't find a driver of webcam 8 windows (or 8.1). I tried for hours to find a.

  Told me the troubleshooting of hardware and devices that "material changes may not have been detected.

  I followed the steps for the option in the BIOS, but when I got to the stage where I had to find the configuration of the system, it was not there.

  Any help would be greatly appreciated, I'm getting very frustrated with all these questions about a freshly delivered to zero laptop.

  UPDATE: I installed all available updates finally. When I open the camera app, I was able to use the webcam and take a picture of me. However, when I moved my computer on my lap the webcam has stopped working and I had returned to the page "connect a camera".

  Is this a hardware problem?

  Hi EmmaAyubi,

  While the webcam is running for a few seconds, it stops working when the laptop is moved, there is a possible connectivity problem. Please, contact the ASUS technical support and see if they can help you with this.

  http://VIP.ASUS.com/Forum

• Copy data based on IF

  Hi, I need to copy specific data to a dimension (State - Sparse) where all the data is loaded to a member of the "No_status" and must be moved to other members in the dimension of status based on an account «LFL_Flag"placed on the shops and «No_Status»

  The script below works, but I think that there must be a way to make it run faster? He currently runs 17 min for a period of time (months). Account and the period is Dense.

  DIFFICULTY (LCY,@LEVMBRS (store, 0), FY14, Oct, real)

  'stat again '.

  (IF ("LFL Flag"-> "No_Entity"->"cp. No "->"stat. No_Status "== 0)

  "stat. No_Status;

  ON THE OTHER

  #missing;

  ENDIF ;);

  'stat existing '.

  (IF ("LFL Flag"-> "No_Entity"->"cp. No "->"stat. No_Status "== 1)

  "stat. No_Status;

  ON THE OTHER

  #missing;

  ENDIF ;);

  'stat LFL '.

  (IF ("LFL Flag"-> "No_Entity"->"cp. No "->"stat. No_Status "== 2)

  "stat. No_Status;

  ON THE OTHER

  #missing;

  ENDIF ;);

  'stat Changed_Start '.

  (IF ("LFL Flag"-> "No_Entity"-> "cp. No "->"stat. No_Status "is 3)

  "stat. No_Status;

  ON THE OTHER

  #missing;

  ENDIF ;);

  'stat HQ '.

  (IF ("LFL Flag"-> "No_Entity"-> "cp. No "->"stat. No_Status "is 4)

  "stat. No_Status;

  ON THE OTHER

  #missing;

  ENDIF ;);

  ENDFIX

  Any suggestions?

  THX

  Simon

  Hi Simon,.

  Each of these blocks of Member is a pass through the database, so I'd make them all in a single block.  You can open a block from Member to Member and then use it to assign values to the members A, B and C.  For example:

  'stat again '.

  (IF ("LFL flag"-> "No_Entity"-> "cp. None "->" stat. No_Status "== 0)

  "stat. new" = "stat. No_Status;

  ELSEIF ("flag LFL"-> "No_Entity"-> "cp. None "->" stat. No_Status "== 1)

  "stat. existing" = "stat. No_Status;

  ELSEIF ("flag LFL"-> "No_Entity"-> "cp. None "->" stat. No_Status "== 2)

  'stat. LFL' = 'stat. No_Status;

  ELSEIF ("LFL flag"-> "No_Entity"->"cp." "") None "->" stat. No_Status "is 3)

  "stat. Changed_Start" = "stat. No_Status;

  ELSEIF ("LFL flag"-> "No_Entity"->"cp." "") None "->" stat. No_Status "is 4)

  "stat. HQ" = "stat. No_Status;

  ENDIF ;);

  If there is existing data for members, you may need to change this option to #Missing.

  I have not tested this code-it's just to show the concept.

• Reduce of hwm after compression advanced on EBS R12

  Hello.

  How can I reduce the size of the tablespace after apply advanced option compression without moving tables, it is possible to do it in the same table space?

  I hope this is normal?

  2740161 wrote:

  Hello.

  How can I reduce the size of the tablespace after apply advanced option compression without moving tables, it is possible to do it in the same table space?

  I hope this is normal?

  It depends on.

  If objects reside in the block just below the HWM, then you cannot "reduce" the tablespace.

• LR CC I try to process a photo that shows celluloid, says 'file was not found", try to import said:"already imported"

  I have LR CC, about to delete the whole program. I try to process a photo that shows celluloid, says 'file was not found", try to import said:"already imported "... Until I give up fact together, someone has any ideas my obviously simple mind can grasp? I am quite proficient in photoshop, lost at sea with lightroom... Thanks in advance for clues...

  It is possible that the file has been moved. It is possible, if the folder is on an external hard drive, the drive letter has changed. Without more details, it is difficult to diagnose. One thing you can try is to right click on the folder in the library module, choose the option to update the location of the folder. Then use the dialog box that appears at the point Lightroom folder.

• Best practice help to spend again vCenter with linked Clones

  Hello everyone

  I searched for days, but couldn't find a way clear of hover over our view 5.2 installation of a new vCenter.  The equipment was aging, and we decided to upgrade and move to 5.5.

  We have rebuilt and forwarded via our guests not VDI to the new vCenter 5.5 environment. I found a few documents, but nothing that tells us if it can be done actually.

  We tried to go in the service of the composer initially to the new instance of vCenter and maintenance, we do the DB on the old Victoria Cross, if it worked I émigrerait the DB above the new Victoria Cross

  We first tried these steps however VMware Documentation Library after removing the old VC service composer and installed on VC New (with ODBC connections mapped to the old VC) it wouldn't work.  We were moving to the VC 5.1 leaving guests ESXi running VDI attached to 5.1

  Then I did more research and discovered the related clones are all related to the database of the old VC and moving them is not possible per this KB KB VMware: workstations managed by moving between servers view vCenter is not supported

  I saw an article here that suggested dumping a bunch of DB and rebuild the new VC with the same name and IP address, but I can't do so because the new instance is already upwards and on a new host name / IP migrate view VCenter (with linked Clones) to new hardware

  I also found this where someone is in the same boat and suggested to recreate pools.  The discussion is not in the details so I wonder if someone can clarify this: migration View Composer and vCenter

  I have about 20 people on VDI in a combination of clones using 3 connected pools and personal drives.  Given that all the info from linked clone was linked to the former base of VC, it doesn't seem wise to move it to the wire.  This would be possible: I still have the base image with all the snapshots for each pool.

  • Persistent backup drives
  • Note the configuration of each pool
  • Disable the commissioning
  • Create DB on VC 55 composer vacuum
  • Create the ODBC connection for composer on VC 55
  • **
  • Do more ESXi hosts to 55 VC
  • Remove existing VMs (will be not able to connect to them at this point anyway)
  • Remove the old VC entry admin view / delete existing pools
  • Install the composer on 55, and then tap new ODBC
  • Create new instance vCenter in Admin 55-pointing mode
  • Recreate pools
  • Import and attach persistent disks (http://pubs.vmware.com/view-50/index.jsp?topic=/com.vmware.view.administration.doc/GUID-BDFCCEC8-682F-4421-8810-06108CBE8D20.html)
  • Recreate events empty DB on 55
  • Reconfigure the parameter DB events in Admin mode

  Any help would be greatly appreciated as I can't find an exact way to do

  Well, I'm pleased to say it worked! I had a few problems by removing existing pools. View repeated deletion but nothing happened. In the end I had to use ADSIedit to connect to the server to manually remove all the old discs VM and pool

  After the installation of the composer on the VC 5.5, I was able to create a login in admin mode and then start to re - create the pools.

  We were able to successfully reattach each disc persistent owners planned.  Did some spot checks and desktop users, bookmarks etc. all worked

  It is a tedious process, but it does not work. I hope that VMware can create an article for it.  God knows that I searched for days, I had to read a lot of things just for this plan.

• New to Puppet Warp

  I just went through my first tutorial Adobe Photoshop CS5 Puppet Warp. There are some minor adjustments that I use the CS6 version. I write to my Photobucket album and put the link here, I hope it will work. I have an image with the movement of the head and the other with mouth moving. Is it possible to combine the two animations into a single image?

  My Photoshop by Lucien projects | Photobucket

  Test

  My Second Turtle.gif gif by lpalta | Photobucket

• registration of a virtual machine

  So im going to certify many vm is through many of data warehouses.  However I prefer to do data store data store. So far, I only know how to do it like this:

  
  new-vm - vmfilepath ' [win2k/win2k.vmx sf-dnv-2300-02 "(get-cluster denver |)"]. get-vmhost | get-random) | % {Start-vm $_.} Name}

  I would like to all vm the datastore sf-dnv-2300-02 is recorded and then put under tension.

  I do not know if something like that might work, any help would be appreciated...

  As you can tell I'm not good at powercli... only to learn little by little.

  $dtstore = get-datastore sf-dnv-2300-02 | % {$_. Name}

  $vm = get-datastore sf-dnv-2300-02 | get - vm | % {$_. Name}

  foreach ($vm to $dtstore)

  {
  new-vm - vmfilepath "[$dtstore win2k/win2k.vmx ]" (get-cluster denver | get-vmhost | get-random) | % {Start-vm $_.} Name}
  }

  If the above could work, it would only add vm (win2k)... not quite what I want. I want all the vm in this data store.

  I don't know how to tell him all the vm in the part in BOLD above...  "Is the only way I use something like this: [$dtstore * / *.vmx] ' but I'm not sure if it's applicable in powercli or even desirable if he had to work.

  also if the virtual machine asks you if it were moved/copied. is it possible to just say "copied".

  Thank you!!

  Take a look at adventurers of the lost VMX and VMX Raiders revisited

• Dough to fit

  In Photoshop CS, there was once an option "Resize Image during the paste/Place", so I could copy a picture and paste it into a document to fit the pixel dimensions. It seems to have moved/CC - is it possible to replicate this without sticking and then manually resizing the image new to match?

  Cheers - Chris

  If no option by default, there is a solution of script should not be too hard.

  So if nothing else should turn up and you need help with certain aspects of the script, you can to

  Photoshop scripts