Mozilla said "your system does not meet the requirements to run Firefox ' but when I check the conditions, my system meets all. What gives?
Requirements:
Mac OS X 10.6 - check - 10.6.8
Macintosh computer with an Intel x 86 - check - 2.66 GHz Intel Core 2 Duo processor
512 MB RAM - check - 2 GB
200 MB hard disk space - check - 130,81 GB free
Is there some sort of hidden requirement that I don't know?
OK, when I take a closer look, it seems that your useragent is replaced by some kind of adware or toolbar. Please refer to this article in order to reset the user agent of firefox settings, then it should work: sites say that Firefox is obsolete or incompatible, even if it's the latest version
Tags: Firefox
Similar Questions
-
I am using windows 7 on my hp laptop. When I try to update I get a message saying that I must have at least windows XP. Is there something else blocking my update? I tried the two update a download of the latest version. My current firefox is 13.0.1
Hi, please, do a right-click on the firefox icon, go to properties > compatibility, and make sure that firefox is not configured to run in compatibility mode (atm your useragent reports that you run windows 2000).
Thereafter, it should be possible to update.Since your profile also show signs of unwanted software on your system, please run a full scan of your system with security tools like the free version of malwarebytes & adwcleaner, which are specialized in the adware and browser hijackers.
Fix Firefox problems caused by malicious software -
Everytime I try to log in my original admin. Account, it is said that it does not find the profile, then product to load a temporary profile instead, one without personal settings or memory. What is that?... and how can I solve this problem?
Hello
These methods should help for Windows 7 or Vista.
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
Safe Mode account has no default password (so unless someone changed
the password should be available).Some programs such as the Google Updater (if you've added the Google toolbar,
Chrome or Google Earth) has been known to cause this problem.Error message when you log on to a Windows Vista-based or Windows 7
computer by using a temporary profile: "the user profile Service has no logon.Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "the user profile Service has no logon. Could not load user profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have visited
logged on with a temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
----------------------------------------------------------------------------------------------------------
For Windows 7:
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html----------------------------------------------------------------------------------------------------------
For Vista:
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaHow to create a Vista - free methods recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html---------------------------------------------------------------------------------------------------------
If you can't access your old account you can still use an Admin to migrate to one
new (remember to always leave an account Admin who is not used except)
to test and difficulty).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
"Your tv does not support the protection of the content of this program. Replace the hdmi to the TV with component cables cable will allow you to view the program.
I get this message when you try to watch HBO from Directv. DirecTV said it is because my tv does not support HDCP (I have KDL-46SL140), but it actually does. Anyone else having this problem?
Hi Tom,
Welcome to the community of Sony!
This TV is compatible with HDCP you mentioned. Try the steps mentioned on the page below to resolve this issue:
http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C387911
Please indicate the solution as accepted, if you find this information useful.
Thank you for your message.
-
"Your host does not support the current settings for comments.
My requirement of virtualization are demanding very high resolution on a Win2000, ESXi host guest. I upgraded, using the stand-alone version of converts, but I can no longer switch to full-screen (the scale). I get the following message:
-
Error
-
Connection error: your host does not support the current settings of comments in mode full-screen. Try to reduce the color depth or resolution of your guest and try again.
Impossible to enter full screen mode.
Do you want to retry?
-
Yes No
-
Does perform a work around?
Thank you
Alan
The vSphere client is a terrible Viewer. Very slow. W2K is also a limitation. Take a look at the other viewers if RDP is not suitable. Radmin is one I've used several years ago.
-
your computer does not have the features of directAccess
whay my computer does not meet the characteristics for directAccess?
whay my computer does not meet the characteristics for directAccess?
check if you meet the requirements, http://technet.microsoft.com/en-us/library/dd637797%28v=ws.10%29.aspx
http://www.Microsoft.com/en-us/Windows/enterprise/products-and-technologies/Windows-7/features.aspx
-
I'm new to APEX, but I will try to provide as much detail as I can so that someone can help me in fact.Relevant elements
P2_START_DATE
P2_TERMSTART
I have the Source for P2_TERMSTART value to select to_char (sysdate, 'YYYYMMDDHH24MI') of double
I have the settings of P2_START_DATE defined as pictured below
When I try to run the page I get the following error.
Contact your administrator for the application. Between Minimum Date attribute & P2_TERMSTART for the P2_START_DATE element does not match the YYYYMMDDHH24MI format YYYYMMDDHH24MI.
I do not understand the error, as it appears that the fields match
Change & P2_TERMSTART to & P2_TERMSTART. You are missing the point.
-
WIN 7 does not have the net driver for Asus A2D. or I'm unable to find it.
WHAT I CAN DO. I HAVE THE CONNECTION TO THE LOCAL NETWORK.
Thanks for any idea, address etc.
DragMil
You can wito to * address email is removed from the privacy *.Try an older driver installed in compatibility mode
To run in compatibility mode do the following:Click with the right button on the installer > properties > compatibility > choose OS
-
I reloaded Firefox as suggested. I clicked "Always" in System Preferences of scrolling. But none of these work. If Firefox does not resolve the problem of scrolling for Mac OS X, I have to use Safari as my main browser, because scrolling works there. I have used Firefox for almost 10 years, but this problem is very frustrating.
A duplicate was question here: http://mzl.la/1hlpGi0
It seems like turning off "Smooth Scrolling" works.
-
Develop the module does not meet all of the changes.
Version 5.7. Updated graphics driver. Program and SSD cache with 50% free space. When I hit the button crop, the image goes gray. all the adjustment knobs do not visually respond to any changes. Thought maybe it was a problem of use of disk, so I moved the program and the SSD cache, but always a problem. Previous versions uninstalled and reinstalled with the same results. Any suggestions?
Information system
GeForce GTX760
CPU i5-4670
16 GB OF RAM
2560 x 1440
Windows 7
The gray screen in development is often caused by a bad monitor profile, usually one that got installed by a graphics driver. How do calibrate you your monitor? You will need to recalibrate. If you calibrate your monitor (you really should!) go into the properties of your monitor pane and delete any profile see you associated with the Analyzer and restart Lightroom.
-
Application does not and the condition to satisfy.
I have code for this method. Its not not run even a single line run here method. Please explain why its kind.
public static synchronized void pushGlobalLockScreen() {}
UiApplication.getUiApplication () .invokeLater (new Runnable() {}public void run() {}
GlobalVars.currentLockScreen = new LockScreen();
GlobalVars.currentLockScreen = new LockScreen();
GlobalVars.lockStatus = GlobalVars.STATUS_LOCKED;
try {}
LocalStorage.setSmartFuzzLock (true);
} catch (MySystemException e) {}
MySystemException.addLog (e.getError ());
}
UiApplication.getUiApplication () .pushGlobalScreen (GlobalVars.currentLockScreen, 1, UiEngine.GLOBAL_MODAL);
UiApplication.getUiApplication () .requestForeground ();
UiApplication.getUiApplication () .pushScreen (GlobalVars.currentLockScreen);}
});
}If you have used the debugger and strengthened through this code and it's actually executing the invokeLater, then the reason is that the code runs this is running on the event Thread and does not give up it. You code probably some 'wait' rather than relinquish control. Step through the code that runs after it and see what happens - I think it is this code that causes the problem, not the code that you have demonstrated.
If you have debugged not this code, then please do.
That said, there are some things that you might consider encoding differently in the code provided:
public static synchronized void pushGlobalLockScreen() {}
-Why sync?
GlobalVars.currentLockScreen = new LockScreen();
GlobalVars.lockStatus = GlobalVars.STATUS_LOCKED;
try {}
LocalStorage.setSmartFuzzLock (true);
} catch (MySystemException e) {}
MySystemException.addLog (e.getError ());
}This code probably didn't run on the event Thread. I consider running before you start the code that must be on the thread of events.
UiApplication.getUiApplication () .pushGlobalScreen (GlobalVars.currentLockScreen, 1, UiEngine.GLOBAL_MODAL);
I could be wrong, but from memory, this code cannot run on the event either Thread. And it does not block, then you code must run past it very well.
Be aware that will push a screen that runs across all screens (other than all the other global screens). This global screen is not really part of your application.
-
Dear all,
I have a problem with my Printer 3050 Deskjet. (USB connected with my laptop).
My printer does not print documents colors in color, but only in black and white (with the exception of JPGs (photographs) which are printed in color.
Word or PDF documents (for example) are always printed in black and white - even if they are in color.
Copy of pages in color on my printer is not a problem.
This works perfectly well. The printer is connected to my PC via USB.
Cartridges (color and black and white) are practically new and original HP cartridges.
Could the problem be associated I could have changed by accident print settings.
Thanks in advance for your advice.
Cheticamp
Hi Cheticamp,
In controlling panrl → devices and printers.
Right-click on the printer and select Printing Preferences.
Cot the Advanced button and make sure that grayscale printing is set as stop and confirm.From within Word, click file > print and click settings.
You will see the screen Lady printing preferences.
Press Advanced Options and check the optio grayscale is set as off for Word as well.Hope that helps,
Shlomi -
INK CARTRIDGE 364 (BLACK) DOES NOT MATCH THE HP PHOTOSMART WIRELESS E-ALL-IN-ONE PRINTER
AT THE END OF THE YEAR, I BOUGHT THE HP PRINTER PHOTOSMART WIRELESS E-ALL-IN-ONE (B110A). I REPLACED THE COLOR (364) CARTRIDGES, BUT THE CARTRIDGE BLACK (364), I BOUGHT IS NOT SAME SIZE ONE PROVIDED WITH THE PRINTER, IT IS MORE SMALL AND DOES NOT FIT IN THE SLOT. DOES ANYONE ELSE HAVE THIS PROBLEM? NOW PRINTER CANNOT USE AS BLACK IS EMPTY AND CANNOT REPLACE IT AS THE 364 PROVIDED WITH THE PRINTER IS DIFFERENT FROM THE PURCHASED SEPARATELY. VERY FRUSTRATING.
Thank you
KERRY
Thank you Carolyn. I'll get to watch the 564 cartridge. Thank you very much for your hope to answer that I can get this resolved otherwise it's back to the PC with the printer world for a refund!
Thank you
Kerry
-
Does not print the magenta color; HP 2575 All in One Photosmart
Installation HP2575 on another PC with 8.1 Windows 64-Bit operating system. After installing new printer cartridges have been installed, print heads were clean and aligned and even Magenta will not print.
Take a look at the diagnostic test page. Colors have lines through them, and the depth of the colors are not what they should be. We did change color saturation temperature and do not have an increase in the saturation of Magenta.
What else should I consider troubleshooting?
Alchohal Publix swabs to clean electrical contacts and the nozzles on the printer cartridges. Also cleaned the contact electric coupling on the printer.
EVERYTHING WORKS FINE NOW!
-
I have problems loading of the huffingtonpost.es and sometimes .com on Safari on my mac and also in Firefox. But the web even chrome load perfectly.
It is the only web that I have problems up to now and is not a related problem of expansion because I don't have extensions in firefox and the same problem occurs there.
Does anyone have an idea of what's going on? It seems that something in relation to the css.
The really strange thing is... I try to load huffingtonpost.com on safari and do not load correctly, I reload and reload and does not load correctly. Then I load in loads of Chrome perfectly and after that I try to load in safari (or firefox again), then load it. :-/ This does not always happen, but then sometimes drive me crazy.
Thanks for any help in advance.
Make sure your OS X software is up-to-date.
Click on your Apple top left of your screen.
In the drop-down menu, click on: software update
That should launch the App Store.
If you see an update for OS X El Capitan and Safari, install these updates, restart your Mac and try Huffington Post on Safari and Firefox.
Maybe you are looking for
-
The screen of my IPod touch 5 began jumping around recently. When in games or safari and App Store, that is. In games, he sends stuff randomly up to the upper right. In the App Store and safari it scrolls upwards at random and click on tabs in diff.
-
Unable to open Windows Update, 0x8024400A error 0 x 80240036
Original title: I can't open Windows Update. I get the following error messages-0x8024400A and 0 x 80240036. Can anyone help please. I recently rebooted my Win XP Op Sys. It was working ok before. Thank you I can't open Windows Update on my desktop p
-
Sign the certificate as a company no
If I want to sign my application with a certificate of BlackBerry, it is always asked for the name of the company. Do I need to be a business to get a certificate?
-
Well well Hello again,. I want an option "hibernate" on my list of... sought judgment on net, I tried these processes, but I did not see a checkbox "Display Hibernate" while doing so... what I need to do?
-
Get information of possibilities using REST or bulk API of Eloqua
Hi allI am newbie to Eloqua Oracle. I'm trying to extract the information from Oracle Eloquapossibilities. I see that opportunities can be imported from eloqua campaigns page settings button. My task is to get all these opportunities in bulk or REST