Sign the certificate as a company no

Similar Questions

• Does anyone know if the version of Cisco Clean Access Server supports the 4.1 (8) SHA - 256 signed SSL certificates?

  Yes, I know they are very old servers and technically, we should move away from CASES in total. But unfortunately, it's an environment I inherited, and I am now dealing with issues.  Because of the requirement to move away from sha - 1 signed certificates that I need to replace my existing certs, certs signature sha-256.  But before I do that I would like to know if anyone knows if CASE version 4.1 (8) supports SHA - 256 certificates?  I did check the release notes, but there is no mention of the supported versions of SHA, etc..  I tried TACS but no joy there either, etc..

  Hello Rafael,.

  SHA - 2 signed the certificate of support was added in 4.7.2 for SCS and CAM.

  We have filed a default document to have it documented in the release notes.
  CSCud99946    Note of support for the NAC should say we support certs of SHA - 2

  Kind regards

  Jousset

• SG300-28 import self-signed SHA2 certificate to the SSL Protocol (including the format? How do I?)

  1. What is the format a certificate and private key combination should play during import to use SSL?

  2. how actually import you - via CLI or web interface.

  I'm trying to import an SSL certificate that is self-signed in the SG300-28 to secure the connection to the web interface of the switch. The certificate is signed by my own 'certification authority' / custom root certificate.

  I tried to do it via the graphical interface of web management (security > SSL server > server SSL authentication) and the command-line via SSH. I will detail my exact process below. I had no problem importing a certificate created in the same way to the Cisco RV320 router, although the web interface is different.

  How to create a certificate that is accepted by the switch?

  (Image Active) firmware version: 1.4.0.88

  My approach:

  1. OpenSSL 1.0.1f January 6, 2014; on an ubuntu 14.04 machine
  2. Create my own, certificate of self-signed root:

   openssl genrsa -out rootCA.key 2048 openssl req -x509 -new -nodes -key rootCA.key -days 3650 -out rootCA.pem

  3. create a private key and the real certificate and sign them using the rootCA.pem:

   openssl genrsa -out switch.key 2048 openssl req -new -key switch.key -out switch.csr openssl x509 -req -in switch.csr -CA rootCA.pem -CAkey rootCA.key -CAcreateserial -out switch.crt -days 3500

  for later use, export the public key of the switch.key - file using

   openssl rsa -in switch.key -pubout > switch.pubkey

  4. open the web interface of the switch and check for the SSL settings (Security > SSL server > server SSL authentication).

  4.1 click "import certificate".

  4.2 paste the contents of the switch.crt file in the ' certificate:'-textbox

  4.3 to import pair of RSA keys

  4.4. Paste the contents of the switch.pubkey file in the public key field

  4.5 by selecting the 'Clear text' radiobutton control and paste the contents of the inside switch.pubkey

  4.6 click 'apply '.

  4.7 receive an error message 'invalid key head '.

  The private key looks like this (oviously, I created a new one for this example):

   -----BEGIN RSA PRIVATE KEY----- MIIEpAIBAAKCAQEA3gOvNzKqULXnT7zL9fl4KJAZMo5eYHfwPSN0wl385na37oHz [23 more lines truncated] aB7Pooa60anjIVJmlSIp4WJ8U+52BMKJZ5rqHnJ1sBBo1zpAtcdspg== -----END RSA PRIVATE KEY-----

  I also receive a header invalid key error when you try to import the private via CLI SSH key using:

   switch(config)#crypto key import rsa

  I also converted the certificate and the private in PKCS12 and then back to the PEM key that gives me the following private key "head" which is not always accepted when pasting in the CLI:

   Bag Attributes localKeyID: FE 24 88 34 66 BE E9 DB CE 4E 91 23 2C 0E 03 B1 A7 58 32 24 Key Attributes:  -----BEGIN PRIVATE KEY----- MIIEvgIBA[...] -----END PRIVATE KEY-----

  What key header miss / what am doing wrong in general?

  It seems that ' import key cryptographic rsa "command is not suitable for import SSL key related private, but rather for the importation of SSH keys. Code "key header is missing" means that switch expects anything other than "-----BEGIN RSA PRIVATE KEY-----", for example the headers that you can see after the execution of ' view keys cryptographic rsa "(- START PRIVATE KEY ENCRYPTED SSH2-).

  To get your SSL certificate installed, you have two options:

  The CLI option:

  • create a RSA private key with command

   switch(config)#crypto certificate 2 generate key-generate 1024

  • create the certificate request with

   switch#crypto certificate 2 request

  (don't forget to provide all information for this order, including '' cn '' and so on). Note that this command must be executed inside the privileged mode and not in mode configuration as the previous command.

  • After you run this command, you'll get sign certificate request (CSR). Copy and paste it into the new file on the server that hosts your certification authority.
  • now sign this CSR file with the command that you have already used:

   openssl x509 -req -in switch.csr -CA rootCA.pem -CAkey rootCA.key -CAcreateserial -out switch.crt -days 3500

  • After signing to just open the file "switch.crt" and copy all content between BEGIN and END section including.
  • and import this certificate with order

   switch(config)#crypto certificate 2 import

  • and finally for your certificate to be active, do it with the following command:

   switch(config)#ip https certificate 2

  WebGUI option:

  Here, the procedure is similar to the CLI:

  • You must click on "Generate certificate request" in the "Security-> SSL server-> server SSL authentication" section, fill in all necessary data and click on "Generate certificate request."
  • you will get CSR data you need to paste into the server with the certificate of the CA.
  • sign the certificate with the command openssl similar as mentioned previously
  • and import a certificate with maintaining "import RSA Key-Pair" unchecked.

  Personally I've never managed to get imported both key and certificate from the outside.

• See 4.5 SSL fails after installation of the certificate

  I have a problem after installation following the steps described in the VMWare KB (and a bunch of other places) a certificate is currently working on an assessment of view 4.5

  I set up the environment and everything worked without problems.  Then I installed a certificate using the keytool and the steps described above, ssl connections ceased to work.  The admin page would be just a moment and my client view (currently on trial with the OS X client) would also expire during an attempt of SSL connections.  I had previously enabled connections not secure so that both connections use http still operate.

  The only difference in my SSL import procedure, it's that I signed the certificate using our AD CA.  I imported the complete certificate chain as a .p7b file and keytool complained that he did not trust my CA, (I said yes to import in any case).

  After this issue, I even tried to go back to the original signed cert free by removing the key file and the file locked.config and SSL still does not work.

  Looking through the logs of the events on the server, there is no error SSL and the view admin page itself don't report problems with the server.

  The only other reference to a similar problem, I have seen on this subject is another post on the forums, but it appers that issue was because the server was also the Wyse report server running on this issue, my server is running anything else that the display manager, I do not use a security server just one server.

  Hello

  > I had previously enabled connections not secure so that both connections use http still operate.

  The option ' require SSL for client connections and Administrator display: "is common for the customer and Admin UI connections.

  Because you have disabled this option, only the connections non - ssl will work for both.

  Connect to youyr Admin UI by using http://serverfqdn/admin/ and enable this setting and restart the login server.

  -Noble

• Replace the certificate self-signed prominent 5.3

  Select a certificate:

  1 Subject: C = US, S = CA, L = CA, O = VMware Inc., unit of ORGANIZATION = VMware Inc., CN = VVVDCVDID03, [email protected]
  Valid from: 31/12/2013-15:56:35
  Valid until the: 31/12/2015-15:56:35
  Footprint: E93EDE1797C55BC61E95DF625AC33EC8D30DD089

  2 object: CN = .net, OR default certificate of VMware View = VVVDCVDID03.mydomain, O = "VMware, Inc.."
  Valid from: 12/30/2013 15:24:20
  Valid until the: 28/12/2023-15:24:20
  Footprint: 671E847CA3A55FC31AA62034174B29EC37D4DF38

  3 object: CN = * .mydomain .net, O is my company Holdings LLC, L = Grant Park, S = Illinois, C = US
  Valid from: 01/08/2014-19:00
  Valid until the: 14/01/2015-07:00
  Footprint: 1D976E97E9B9C55A02470F45618F7E2CD8763B43

  Enter the choice (0-3, 0 to abort): 3
  Remove the link to certificate successfully 18443 port.
  Bind the new certificate to the port.
  ReplaceCertificate successful operation.

  Yet the certificate still shows as invalid and self-signed view Admin and when I join on the site.  It's showing that ranked #2 in the SVICONFIG.

  In addition to this SVICONFIG does not appear to be installed facing the connection to the server at the point 5.3. Or at least I can't.  5.3 documents do not appear to exist. 5.2 only.

  How can I replace the self-signed certificate in my servers connection and security now?

  http://pubs.VMware.com/view-51/index.jsp?topic=%2Fcom.VMware.view.installation.doc%2FGUID-5ED2A8AB-0D5F-495F-B2F7-D7C64C7A021E.html

  http://pubs.VMware.com/view-51/index.jsp?topic=%2Fcom.VMware.view.installation.doc%2FGUID-5ED2A8AB-0D5F-495F-B2F7-D7C64C7A021E.html

  The solution in the end was that the self singing and new cert had the same friendly name of "vrm".  Changed the name of the car to "oldcert" sign and restarted the server connection.  That solved.

• Use the certificate self-signed on TS 2008R2

  Hello reader,.

  We use Firefox on a Terminal server with about 20 servers server farm environment.
  We use a lot of intranet sites for which we have the certificate self-signed by our domain controller.

  In Firefox users get prompt security sec_error_unknown_issuer. As much as I red that Firefox does not check for local free self-signed certificates.
  Is there a way we could set up for all users, they do not see the above error-> specific <-websites (intranet)?

  We do not want the users to add the Security (certificate) as exception 20 times for EACH intranet website on 20 servers dispute.
  It is something that I can edit in mozilla.cfg on each server or is there another solution?

  Thanks in advance,
  Kind regards
  Martijn

  I solved the problem with manual below:

  http://community.Spiceworks.com/how_to/15158-Firefox-trust-a-local-certificate-authority-for-all-users-and-computers

• I am trying to sign a certificate (using Mac) and Firefox will not accept the password.

  The certificate is used to authenticate my identity.

  He rejects every time - turn the box a certificate with password space empty. I've seen a few questions about certificate issues in Firefox there a few months they will be solved? Any ideas of a workaround in the meantime?

  Hello
  I had the same problem, and I read somewhere that, according to a mozilla knowledge base article, the password is a requirement for import certificates (although the corresponding KB page is now unavailable)

  I tried the following and it worked for me:
  -certificates of export on the desktop
  -remove the certificates in firefox
  -set a master password on firefox (preferences - security - using the master password)
  -import certificates

  You should now be able to sign.
  Hope this helps

• Create the certificate and Code signing

  Hi all

  I'm still a little confused on the operation of the certificate and the sign Code.

  First I used Flash Builder Burrito to create my certificate and I choose my file syc. After that, I got an email from RIM saying that my registration has been completed. After that, I realized that the certificate I created has a different name than I used to ask my sign code. When I created a new graduate with the right name, I could associate the core sign in my new certificate and get this error

  

  When I tried to sign my application via command line, I've got it successfully: "Bar signed."

  Does anyone know why I get this error message, and if the command line worked really. can I use different certificate with a sign code?

  Thank you very much

  Hey arthur,.

  the rule is that if you mess up the record in some way, it is best to ask a new set of signature keys. You can not reinstated a key already registered. also, I saw that you use Flash Builder to make the entry to the registry. Although I've seen this work, I recommend that do the actual packing and signature via command line. Good luck!

• See imprint SHA of the certificate self-signed client webvpn ASA?

  When connecting to an ASA with certificate self-signed, using Cisco AnyConnect Secure Mobility Client 3.1 (10010), the AnyConnect client presents the big red warning box, which is good.  The user must turn off "Block for unknown servers connections" in the preferences in order to complete the connection.

  Is it possible for the user to view the fingerprint SHA1/SHA3 cert self-signed, before disabling the safety block?  I could have sworn that older versions of the AnyConnect client allow the user view the certificate details and fingerprints before choosing to accept and connect.

  You can't make AnyConnect 3.x or 4.x as far as I know. Even a set of Diagnostics and Reporting Tool (DART) does not include this information.

  It is quite easy to inspect although if you simply browse to the ASA to almost any browser interface. From there, you can review the site certificate (ASA), including the footprint of the RSA public key.

• installation of virtual pc on W7 error: 0 x 80096002 the certificate of the signer of the message is invalid

  I recently updated my W7 PC to W8

  I would like to install Virtual PC because I have important software that worked on W7 but will not work W8 (I thought wrongly that there was little underlying technical difference between W7 and W8)
  When I run the MSU Windows6. 1 - KB958559 - x 86-RefreshPkg I get this error:
  Windows Update Standalone Installer

  error: 0 x 80096002 the certificate of the signer of the message is invalid
  I really need virtual pc work soon otherwise I'll have to give up on W8 I won't do (even just because I have to spend 2 days of slower, re-installing software!)

  Hi Richard

  Virtual PC is not compatible with Windows 8.

  Windows 8 includes components of virtualization of the Hyper-V that you can use.

  If you have any questions about this item, please ask in the following forum. That's where Hyper-v experts answer questions.

  Virtualization of Windows 8 Forum:

  http://social.technet.Microsoft.com/forums/en-us/w8itprovirt/threads

  Concerning

• How to find the certificate used to sign app?

  There is a site that uses DBsign UWS to validate personal certificates on a smart card.  I found myself breaking this feature by moving the default Java truststore so I could create a new one with a few roots/split AC that I trust (I have no desire to let apps signed by China, Russia, Turkey and countries spelled with heiroglyphs).  Now, my browser thinks that the UWS is self-signed and rfuses to run it.  I need to find the certificate used to sign this app to see what cert (s) sign, so I can add them to the truststore.  How can I find that?

  To answer my own question:

  jarsigner - verify - verbose - CERT DBsignUWS.jar

• How to disable "signed with the certificate from the certificate store.

  Adobe Reader v11.0.10, opens in trial mode.

  «You use features (sign with the certificate from the certificate store), which require a license with more features (Expert).»

  The program will continue, but your document will show that it was made in demo mode.

  Under the document keyword properties I see ' "MODE of TRIAL / Expert features: sign with the certificate from the certificate store" "

  I uninstalled and reinstalled Adobe Reader do not understand how to return to original and free characteristics.

  So the question is, how do I disable the functions that require a license?

  I have found the source of the problem and and embarrassed to say he wasn't Adobe Reader.  The problem was in the program I used to create a PDF document (he used a cert to sign the document) which was then opening Adobe Reader.

  Please consider this issue resolved.

  Thank you

  R.

• PDF file signed with certificate of certification of company

  Hi all

  I have a question about signing PDF documents. I have MS enterprise CA in my network and timestamp server. We use certificates to sign documents MS office document signing.

  Is it possible to sign PDF documents with adobe reader? In the preferences-> Security and preferences-> Signatures there are some settings where I can see my certificate and can set timestamp server, but areshowed of certificates as not approved and sign with certificate option is grayed out.

  If it is posible to sign documents PDF in this way could someone share with me the steps how to do?

  Signature is currently single operation Acrobat. It is not available in the player, which explains why some commands are gray in Reader. You can validate signatures PDF in Reader that's why you can run commands that are related to the validation of the signature.

  You can use Trusted identities UI (11.x is in the preferences-> Edit-> Signatures-> certificates identities & Trusted-> more...) to import your certificates of root and set the trust. You can also set the trust of the Signature Properties dialog box (right-click a signature and select "Show Signature Properties" in the drop-down list). In the Signature Properties dialog box click "Of the see the signatory certificate" which will bring up the dialog box display the certificate in which you can select a certificate in the chain and then click on the 'Trust' tab to bring up the component change Trust.

• VPN client using the certificate self-signed on SAA

  Hello

  I need set up a vpn client that use a certificate automatically generated by the ASA.

  The VPN configuration is easy, especially with the use of the wizard.

  The problem is that I need the procedure to configure the ASA as a CA server and how to send the certificate to the client

  Thank you

  Just to let you know, the ASA can act as a CA server for authentication of cert based for ipsec vpn. It is only possible for sslvpn. So in your case, the client should be the AnyConnect client.

• It a way to re - sign the application developed with Adobe DPS?

  Hi everyone, I explain a problem I have with the simple edition of DPS (it useful that is until May) to see if anyone knows a solution. I developed an application for a client, but the client wants to publish the Apple Developer app with your name. How to export the .ipa .zip Dps request certificates Apple account and logically put mine... (customer is a large company and I do not give me your password Apple etc) you know if there is some way they can re-sign the app? As you do when you develop an application for a client who wants to publish themselves?

  If the app is not yet published. Ask your customer to create certificates to their Apple Developer and download them. Zip and e-mail to you.

  Change app using their certificates.

  Then connect to their iTunes connect and create some app, complete details of the app. Download distribution.zip using the application loader.