MSDS reporting

Similar Questions

• MSDS report templates

  I'sdlike to use templates of reports, but TMS > Reporting > Reporting Templates no records exist under 'My models' or 'all '. I don't see a way to add a model, no such imports.

  Amodule statement which must be purchased under license and installed?

  Paul

  Hi Paul:

  You create a template by going to one of the Reporting menus (e.g. detail record call--> end points, for example) and by searching based on criteria you choose.  If you want to save the search, you click 'Save as template' in the reports page on which you ran the research.  It will prompt you to enter a model name; Once registered, it will then appear under TMS--> Reporting--> report templates.

  TMS online help file:

  Creating a template

  Creating a report model can be done on most of the pages viewed in Cisco TMS:

  1. Click on Save as template button in the field of the request.
  2. Enter a unique name for your model.
  3. Click Save.
  4. The saved query will be available in models reports page.

  Try it using the page of detail records call for your end points - shouldn't it need to buy additional licenses for the above information are available.

  HTH-

  Tina

• MSDS reporting error

  Hello

  I have the following problem with the TMS - while trying to generate one of the first 3 reports in Reporting-> conferences, I get the following error:

  Error details:
  Server Error in '/TMS' Application.
  Difference of two datetime columns caused overflow at runtime.
  Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
  Exception Details: System.Data.SqlClient.SqlException: Difference of two datetime columns caused overflow at runtime.
  Source Error:
  An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
  Stack Trace:
  [SqlException (0x80131904): Difference of two datetime columns caused overflow at runtime.]
  System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +2030802
  System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +5009584
  System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning() +234
  System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +2275   System.Data.SqlClient.SqlDataReader.HasMoreRows() +211
  System.Data.SqlClient.SqlDataReader.ReadInternal(Boolean setTimeout) +217
  System.Data.SqlClient.SqlDataReader.Read() +9
  System.Data.Common.DataAdapter.FillLoadDataRow(SchemaMapping mapping) +72
  System.Data.Common.DataAdapter.FillFromReader(DataSet dataset, DataTable datatable, String srcTable, DataReaderContainer dataReader, Int32 startRecord, Int32 maxRecords, DataColumn parentChapterColumn, Object parentChapterValue) +164
  System.Data.Common.DataAdapter.Fill(DataSet dataSet, String srcTable, IDataReader dataReader, Int32 startRecord, Int32 maxRecords) +424
  System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +204
  System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +319
  System.Data.Common.DbDataAdapter.Fill(DataSet dataSet) +94
  Microsoft.ApplicationBlocks.Data.SqlHelper.FillDataset(SqlConnection connection, SqlTransaction transaction, CommandType commandType, String commandText, DataSet dataSet, String[] tableNames, SqlParameter[] commandParameters) +270
  Microsoft.ApplicationBlocks.Data.SqlHelper.FillDataset(String connectionString, CommandType commandType, String commandText, DataSet dataSet, String[] tableNames, SqlParameter[] commandParameters) +129
  Tandberg.TMS.Framework.Db.DbHelperTransaction.FillDataset(String connectionString, CommandType commandType, String sqlString, DataSet dataSet, String[] tableNames, SqlParameter[] parameterValues) +87
  Tandberg.TMS.Framework.Db.DbHelper.FillDatasetWithSql(String sqlString, DataSet dataSet, String[] tableNames) +70
  [DatabaseException: Exception of type 'Tandberg.TMS.Framework.Db.DatabaseException' was thrown.]
  Tandberg.TMS.Framework.Db.DbHelper.HandleDatabaseException(String spName, SqlException exception, ICollection`1 parameterValues) +381
  Tandberg.TMS.Framework.Db.DbHelper.FillDatasetWithSql(String sqlString, DataSet dataSet, String[] tableNames) +196
  Tandberg.TMS.Service.Statistics.StatisticsDataManagement.AddNewDataSetFromSQL(StatisticsSetupGraph statisticsSetupGraph, StatisticsQueryProperties statisticsQueryProperties, StatisticsAxisFormatEnum statisticsAxisFormatEnum, Boolean export) +138   Tandberg.TMS.UI.Statistics.StatisticsHost.BuildStatistics(Int32 statisticsId, Int32 TranslateType, Boolean exportData) +2889
  Tandberg.TMS.UI.Statistics.StatisticsHost.Page_Load(Object sender, EventArgs e) +643
  System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14
  System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +35
  System.EventHandler.Invoke(Object sender, EventArgs e) +0
  System.Web.UI.Control.OnLoad(EventArgs e) +91
  System.Web.UI.Control.LoadRecursive() +74
  System.Web.UI.Control.LoadRecursive() +146
  System.Web.UI.Control.LoadRecursive() +146
  System.Web.UI.Control.LoadRecursive() +146
  System.Web.UI.Control.LoadRecursive() +146
  System.Web.UI.Control.LoadRecursive() +146
  System.Web.UI.Control.LoadRecursive() +146
  System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2207
  MachineName:
  TimeStamp:
  AssemblyName:App_Web_kg0ilx1k, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null
  AppDomainName:
  ThreadIdentity:
  WindowsIdentity:NT AUTHORITY\NETWORK SERVICE
  URL:http://x.x.x.x/tms/default.aspx?pageId=86
  
  

  The only thing that has changed in the configuration of TMS wa deadlines by default to keep the data for reports.

  Have someone met with such a problem and a way to fix it? Looks like some SQL codes dig...

  Yes, I would upgrade to the latest and greatest, i.e. TMS 13.2.1. There is a difficulty which entered 13.1 on this stack trace error when you select this report

  https://www.Cisco.com/en/us/docs/Telepresence/infrastructure/TMS/release_note/Cisco_TMS_Release_Note_13-1.PDF

  See reference id 87430.

• VCS StarerPack + MSD - reports

  Hello

  Customer a VCS Starter Pack + TMS for the management.

  I know that VCS Starter Pack more than TMS does not support the report files. He don't suport. not all reports of type or kind of reports?

  Custome really want to get TMS reports, what can I do to fix this?

  Thank you

  I never tried to add a starter pack to TMS, just out of curiosity, have you tried it?

  I would say that it needs to be upgraded to a full VCS - E + Movi to do this.

  (at least the documentation given).

  If he has managed in TMS end points at least the call Info

  but you will not have the movi stats (which are not so good in the TMS standard reports in any case)

  and anything else related to the VCS-CDRs.

• Emailing MSDS reports

  Hi all.

  Anyone know if it is posible for TMS to send generated reports?

  Kind regards

  Federico

  Only the available options are export Excel or pdf, and then manually e-mailing-add 'auto' e-mailing of option as a feature may request?

  /Jens

• No CDR MCU logs on MSDS

  Hey cisco-ster!

  I have 2 simple questions about interoperability TMS (14.3.2).

  (1) when it comes to Reporting-call detail Records-MCU, I couldn't see all the folders on the chart.

  Even if the MCU is properly registered on MCU (4.1), the records do not show on this page. Also, I could see the proceedings of each saved settings.

  (2) with the logs of packet loss on the MSDS report category, I couldn't see newspapers of the MXP endpoint C-series (TC6).

  I missed some configuration? or both work as designed?

  I'd appreciate a response to this topic!

  Thank you

  Kjetil Ree wrote:
  Paul Changwon Choi wrote:
  1) When it comes to Reporting-Call Detail Records-MCU, I couldn't see any records on the graph.
  Even though the MCU is correctly registered on MCU(4.1), the records don't show in that page. Also I could see the records of every registered endpoints.
  MCU software 4.1 is quite old (2010?), so we haven't tested it systematically with TMS 14.3.2. Would upgrading to 4.4 be an option?
  

  I've done some research more and asynchronous bridge of TMS CDR mechanism requires MCU 4.2 and later. I highly recommend upgrading your software MCU.

  If upgrading is not an option, check that the receiver of the feedback is set that correctly on the MCU and then create a network trace to watch how TMS responds to feedback. TMS always responds with a 200 OK? Whatever it be recorded in the log-web - TMS public.txt?

  Kjetil-

• TMS licensing provision

  Hello

  Can someone explain how the VCS/TMS system manages license Award for customer MOVI?

  For example, we have 25 licenses of provisioning TMS extension. This TMS reports 15 licenses provisioning and 10 used available licenses.

  However, I can see through the VCS that we have at least 18 MOVI registered accounts with only 3 active in calls. I can't understand how the MSDS reports licenses.

  I have to add 100 other users to MOVI and need to understand how many licenses to buy - as appropriate.

  I'm just assuming that customer MOVI uses only licensed in call - and I could have 1000 users registed with MOVI on a TMS 25 provisioning County of license?

  Thank you

  Stem

  Hi Rod,

  I can't speak for why you get the discrepancy in the number of users Jabber (Movi) connected in accordance with the MSDS and VCS, but I can answer the part about how many licenses to purchase.

  Is the way you need to look at, but a lot of people, you expect to connect to Jabber (Movi) at a given time, is license how much you need.  As each person logs in, they will consume a license, detached from all of the available licenses.  When they connect, that licenses they took, will now be free and available to be used by someone else.  Make sense?

  Something to note on the VCS with light records more than what MSD reported as being used and available, is to check if any duplicate records, and look what the address is displayed, such as:

  SIP:[email protected]/ * /: 60248. transport = tls

  SIP:[email protected]/ * /: 60248. transport = tcp

  I saw sometimes a user will register twice, but under different protocols, note the tls and tcp at the end of each pattern to address, as indicated in the State > inscriptions on the VCS.  I can't say for sure, but maybe it's what you see.

  I hope this helps.

  Patrick

• Satellite P100: Memory Stick Duo Pro with MSD adapter is not recognized

  When I insert the CSDP in my Satellite P100-473-multi card reader - Vista preinstalled - (using an adapter MSD), the removable media is listed in the Solution Explorer, but the card cannot be read.
  With a 32 MB card, he pointed out that the card needs to be formatted first... but correct data are inside and must be visible.
  With 1 GB card, it reports that card is first inserted...

  Did anyone experienced this problem?

  Hello

  Have you checked the user manual you?
  Take a look at Chapter 8!
  There is information that the card reader is supported only SD; MMC; MS; Cards MS Pro and xD.

  As you can see that it supports the Memory Stick Pro, but not the Memory Stick Pro DUO!

• Reports on the TMS - network packet loss

  Hello world

  I'm seeing packet loss reports in TMS, but there is no info here.

  My network is: VCS 7.0.2 movi, c20 and ex60 registered (SIP) as well as a TMS 13.1.2.

  The vcs is a starter pack and the TMS is the demo version. I first registered endpoint of the vcs and then added the TMS to the network. I have the endpoints addition and vcs to TMS. In TMS, I see the endpoints and the news on their topic, but unfortunately no information in the report of packet loss. I made a call between movi and c20 with packet loss, but no info has been shown in the report.

  I am very new to the TMS, and I wonder if there is something I should be doing in order to make endpoints send info packet loss to TMS.

  I sshed in endpoints and I can see the info on packet loss and jitter through the api.

  Described above is my test network on which I can make prety much all about. I also have the same problem (this time with EX60 endpoints, control VCS and TMS) on a network of clients and on this network that I really need this job.

  Any help would be appreciated. Form what I read end points to send this info by HTTP to MSDS. Am I wrong?

  Thank you for your help.

  Hello

  Endpoint to send your comments to tms on http Yes. I'm not at the office and this cannot be verified at the moment, but I don't know if devices running software like c-series and ex support tc this packetloss reports, I know the MXP legacy for this. If anyone can check it out that would be great. If this isn't the case, I will check it tomorrow.

  At least, you can check that endpoints send your comments to the tms at all looking at the system in the browser tab newspapers.

  Check the trap logs. If you see connect and disconnect traps here, feedback should work.

  /Magnus

  Sent by Cisco Support technique iPhone App

• Use of the lack of report

  I use 15.2 TMS, and bridge usage report is AWOL.  I have no idea why this would be.

  Any ideas?

  Don't you see the use of bridge under the reporting menu report, or report does not work?

  Im running MSD 15.2 and I have no problem, see the report in the menu and the consultation. Have you checked the permissions of the user to ensure that all were not unselcted?

• How can I report a hacked account to get my money back

  I was sent from iPhones that are not mine. think I was hacked, how do I report it and request a refund

  iTunes Store-what to do if your account has been compromised

• report of kernel panic: kernel_task

  Who may be reading - please advice!

  I had a few panic kernel last week:

  -kernel panic started using photoshop lighroom cc

  -Restart computer, panic came 20 minutes later

  -computer restarted, did not use any design programs or photo, panic took place 10 minutes later

  -connected temporarily separated I have that has no file - well just to check email, watch movies

  -restarted the safe mode and saved all my valuable info to my external hard drive

  -checked the material through computer test = all very well

  -re-installed the OS form scratch and re-installed programs.  Have stayed on El capitan and did not improve with Sierra still.

  -panic happened once when I tried to use a cc design program.  Used CS6 version and it was very good.

  -panic occurred when I tried to open my library lighroom. Installed LIghroom Cs5 (old version) and started a new library - has worked

  -use of regular program is very well: e-mail, web surfing, viewing

  -last night worked on lightroom for a good 45 min - 1 h, and then passed to photoshop cs6 for 20 min - computer has a different kernel panic

  -just today, I worked on illustrator cs6 for 30 min and the computer has a different kernel panic.

  looking at the reports, most of them joined kernel_task

  My computer:

  MacBook Pro retina mid 2012

  I7 clocked at 2.6 GHz, DDR3 8 GB 1600 MHz RAM

  Intel HD Graphics 4000 1536 MB

  I watched the last report and it wouldn't let me post because of "caractΦres" (don't know where)

  try to replace underscores with hyphens characters, or posted to an account free pastebin.com and give the link (NOT a download - anyone who thinks clearly will download a file of mystery).

• WARNING: Beware of Trusteer report installation on macOS Sierra

  Just a word of warning to users who have the version for macOS Sierra - I'd be suspicious about installing and using Trusteer report of IBM software as it doesn't seem to work correctly with Safari 10. Although maybe it's not the case for all devices running Safari 10, it certainly caused problems on my Mac and someone else on this thread:

  Safari 10 high CPU usage

  High CPU usage (and therefore high battery drain) is the main problem I've experienced with that. If you have already installed report, maybe try using Safari and check Activity Monitor CPU usage to see if this problem is widespread or limited to certain devices (mine included).

  Report was constantly beset with problems on my Mac - in OS X El Capitan icon appears in Safari 9.1.3; in the public beta of macOS Sierra the installer kept crashing and causing my Mac restart unexpectedly. and now high CPU utilization when you use Safari 10.

  Everyone encountered problems with the report? For now, I don't particularly want to reinstall the software, despite its security perks - headaches constant software involves dissuaded me to use it for the moment.

  I agree whether Trusteer report on a Mac installing problems.

• Recent messages "gibberish". What are they and how (and why you should) report

  You probably see many of these posts on the forums and I was wondering their purpose:

  

  These types of positions are designed for the driving position and validation of a scam or scam site in a results of web search engines and leaving them alone or does not does not prevent the scammer to obtain the desired goal:

  By posting this garbage repeated on legitimate sites someone looking for support may fall on this phone number of rogue in a higher class web search results and be inclined to think that the outcome is legitimate

  The end result is a person who unknowingly comes into contact with a scam fake support and is fooled and took their money, or worse.

  The good news by using the tools on these forms, anyone can report these threads using the 'down caret' symbol next to the button to 'follow' the moderators know lawful messages down permanently.

  With the message open, click the icon "down caret.

  

  then select 'Report Post'

  

  Under the "what is the main reason...". ' Select 'Spam', then click on the 'Report Post' button

  

  you have lent a helping hand to help prevent the greater threat of computers users have to this day.

  Now let out and take back the internet!

  Kill the Zombies (Oh!) Hold on! "They are already dead.)

  Dismembering and chewing members!

  Good dog, Scoobie.

• Please report problems than 10.0 to Apple

  Use this address to report problems to Apple. Please use it if the issues are not resolved through community support site. Apple developers need to know about bugs, so they can fix it in the updates.

  http://www.Apple.com/feedback/

  Strange you didn't solve any problems of iOS 10.0.1. You have encountered a problem? It could be that he is not really a bug, in the true sense of the word.