MSE does not complete its scan - blue screen of death

Similar Questions

• T500 fingerprint reader does not load at startup (blue screen)

  I have 2081CTO T500. Provided natively with Vista Home, but I reinstalled with XP Pro SP3. All the latest updates are installed both drivers and windows (as of March 12, 2010).

  I've had this laptop for about a year and the fingerprint reader to work properly. A few months ago it stops working for some reason any and I stoppped using it. I finally had time to reinstall the whole windows and installed. It worked well for about a day, but today I was using my computer and it suddenly froze unanswered. I turned off and when I walk back, the fingerprint sensor would not load and a blue screen came up with an error that a failure to boot and windows kept just restart at this stage and display the same message. I password protected journal and had loaded all ten fingers to use during the connection (not the Welcome screen).

  I tried power cycling, did not work. Subsequently had to connect via safe mode, disable the fingerprint sensor to connect and then reboot in normal mode to be able to connect without the Blue error screen. I tried updating the BIOS, did not work. Reinstalled the sensor of fingerprint, again the same problem. I also reset the fingerprint sensor in the BIOS and reinstalled the software, but still the same problem. Basically now I use the home screen and in this way, that I don't get the Blue error screen. It just continues to show as if the sensor is train load, never happens, so I just put a password and enter. I remember that some months ago, when I had a problem, it was similar. It worked fine, but when I turned off the Welcome screen, I suddenly had a problem with the sensor that was not resolved until I reinstalled windows. Now that I think of it, it could be the same disabling the Welcome screen things screwed up again.

  Could someone please explain what is happening? Why are there so many problems without the windows welcome screen? I know that the sensor works very well because when I am trying to scan my fingers or even connect to Thinkpad security systems, it works fine. It's just windows connect you that is screwed. I can't go back again to work at least with the Welcome screen. I'd appreciate any help.

  After a few bars, I isolated the problem to the personal firewall. I changed the settings and fingerprint reader worked very well. I hope this will help someone in the future.

• USB-6009 not recognized after the blue screen of death

  I have two devices USB-6009, used with NOR-DAQmx and Labview to make some analogue simple analogue input and output.  The USB box - two 6009 were previously works very well on this PC.  Recently, I got a blue screen of death, associated with a different USB device to (non - OR) connected to the PC.  I not save the information of the blue screen of death.  When I restarted the computer, the USB-6009 devices were no longer recognized by Labview / MAX.  The Green LED on the USB - 6009 s do not come.  The USB - 6009 s appear in the Device Manager of Windows with a yellow exclamation point ("Windows cannot load the driver for this hardware device").  If I connect the USB-6009 case to another PC, MAX recognizes them on this PC, and I get the usual flashing green LED.  If I connect another USB-6009 (never connected to this PC), I get a green LED solid, and, says Windows cannot load the driver.

  I am running Vista, Labview 8.5 and NOR-DAQmx 8.9.  I rebooted 5 - 6 times, I tried disabling and the reactivation of the USB-6009 by windows Device Manager, I tried the options "update driver" in Device Manager.  Any advice on how else to solve it?  Thank you!

  The driver update and turn do nothing to the main driver - DAQmx. Reinstall or repair that.

• window does not go past a blue screen that says windows can't connect me

  Hi I have an older version of windows xp and that you downloaded an older version of quickbooks 2007 program a disc when it said to restart the computer I hit reboot and now my computer will display loading windows and then stop to blue screen with the windows logo, I can move my mouse but nothing happens I (use this computer very rarely) that it is an old but I still need it from time to time. help please. Thanks Rose

  Hi Rose,

  · What is the error displayed in the blue screen?

  · Provide the full error message with the error code.

  · What is the service pack installed on the computer?

  · What is the number and the model of the computer?

  Try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx

• Acer laptop does not start after the blue screen

  After I got a blue screen (flashed by too fast to see the error message) when I try to reboot my acer 5610Z laptop computer with vista home edition, usually nothing happens at all. sometimes windows is trying to run the Startup Repair tool, then crashes and only a cursor flashing at a black screen.  Tried to open the case and clean the Fan & Heatsink heat to air without effect.

  The blue screen came a few days after I started using a new USB mouse, but the fan seemed to get high a few days earlier.

  But I noticed it will make the road to startup repair only if the battery is in, and never if only the power cord is attached.  Also, if I let the computer sit for several days, it is more likely start (even though he never passed from the Startup Repair).

  1. try the system restore.

  2. try to do a startup repair disk.

  3 acer Recovery Options.

  4. contact Acer.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.acerpanam.com/Synapse/forms/portal20.cfm?RecordID=853&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2

  Acer eRecovery made

   

  1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.

  ·        The unit is able to reload Windows from this mode faster then CD.

  ·        The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.

  ·        Users are able to change the password in this mode for eRecovery only.

  ·        The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.

  ·        It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.

  2. in Windows, there are 3 ways to access eRecovery functionality.

  ·        Press Alt and F10

  ·        Open Acer eManager and then double-click eRecovery.

  ·        When a system is new it should automatically open this application and invite you to do the recovery media.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Acer.com/worldwide/support/index.htm

  Support &

  See you soon.

  Mick Murphy - Microsoft partner

• Di Shutdown does not work, got the blue screen, beware, if it's the 1st time, etc., bios .updated .shutdown worked for awhlie, then got the same blue screen on another attempt to stop

  I had trouble with the fans so I unplugged everything, pulled out the memory and put it in. Shortly after received warning on a stop. I've updated the bios and things worked fine for one night. The following day I uninstaaled some programs and blue rebooted and got the screen again. I can right through the blue screen and sign, but have to stop with button / stop.

  Hello

  What is the exact error message on blue screen?

  This error message can point to a hardware or software that causes this problem. If the computer restarts after the Blue error screen, disable the automatic system failure restart option allows to capture the error message on blue screen.

  Check if the problem persists in safe mode and after the same return.

• Windows 7 Upgrade Advisor does not complete the scan.

  Windows 7 Upgrade Advisor never-ending analysis. Despite saying that the scan would take only a few minutes, he keeps just analysis ad infinitum (about 24 hours before I got tired of it and stopped). The clues as to why this is happening and how I can make it work properly?

  Hi Paul,.

  Can you please email * address email is removed from the privacy * and attach the file "% TEMP%\WuaDiagnostics.log"? It will help us solve what happened here, and if we can give you a solution for this.

  Thank you
  -Richard
  Windows 7 Upgrade Advisor program manager

• USB MALFUNCTION. EVERY SECOND, PLUG UNPLUG ANY USB NOT CONNECTED SOUND. BLUE SCREEN OF DEATH.

  I also wanted to put this up as a background for my laptop.

  WAAAAY before this problem started my webcam stopped working and when I close my laptop, then open it again (pulling on my screen down and closing laptop then pull the screen up) the computer refuses to start and just flashes, forcing me to remove and replace the battery to restart. I don't know if it is a symptom that lead to my problem, but could you give me some advice on this? Like, it would be something that lead to the problem or should I start individual questions for specific help on each problem?

  From what you describe, it looks like there may be a hardware problem with the webcam.

  Can you try disabling the webcam in Device Manager, restart the computer and then see if the blue stop screen error.

  The memory.dmp file showed a potential involvement of igdkmd64.sys (Intel graphics driver).

  Try to run the utility from Intel and see if it picks up the driver updates:

  http://www.Intel.com/p/en_US/support/detect

• I downloaded an update and restarted my computer, received the blue screen of death shortly after the computer restarts. Now it does not start

  I don't know when the downloaded update, the computer has been restarted on September 10, 2010 to install updates. Shortlyl once the computer is restarted, I got the blue screen of death.  with the details of error like:

  Stop 0 x 000000050 (0 x 000000000000000, 0xFFFFF88001DCAE4, 0xFFFFF8A00B490027, 0 x 00000000000002) do not know if the number of zeros is exactly right in one of those, but it's super frustrating.

  I tried to restart my computer in repair as recommended (get blue screen of death), I tried to reboot normally, loop just restart procedures asking if I want to restart in repair mode.  I tried SafeMode (BSOD), I tried to restart with last working restart (restart loops), I tried to choose the "Computer repair" BSOD I tried a diagnosis and all past.

  Help!

  Thank you.

  So yes actually hear nothing helped me.  Seems that, given that the computer is not stopped correctly and my hard drive was not recognized there starting the cycle upward or give me the BSOD.  Put it in my Ubuntu CD spare which I've had since my last PC hard drive became corrupt and force back across my hard drive.  After doing this, I was able to do a boot repair, who led for the BSOD.  Not sure how that actually fixed, lost about 10 hours of my day.  So I guess I can chalk up to Microsoft and a reminder on why I should buy Mac for now on... an update shouldn't really cause such problems.

  I get that not everyone has the same PC, so it is difficult to tell if an update is bad, but he should not do this and if an update is the cause of a certain segment of consumers who are updating must be taken down for everyone, or at least the users with the configuration that is known to have problems with an update.

  Problem is solved, had to go back to a previous version of good boot where I have not install updates again.  Now, I'm trying to understand who was was bad, so I can leave my computer knows to ignore.

  Nice day.

  Just in case someone needs to know how to use Ubuntu to back up files on their PC that does not load windows, please see the link below:

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer/

• Blue screen of death 0 x 00000024 (0 x 00190444, 0 x 00000000, 0x870FF5E0, 0xc0000102) using Vista, poster at startup and no longer starts. Does not start in SafeMode either. Any ideas of how fix?

  Blue screen of death 0 x 00000024 (0 x 00190444, 0 x 00000000, 0x870FF5E0, 0xc0000102) using Vista, poster at startup and no longer starts. Does not start in SafeMode either. Any ideas of how fix?

  Possibly a hard disk failure.

  http://msdn.Microsoft.com/en-us/library/ff557433 (v = VS. 85) .aspx

  Try to run diagnostics from the manufacturer if you can.

• Windows does not detect the external monitor after Blue Screen of Death

  Hi guys,.

  I currently have a problem with my second monitor, I installed the monitor (Acer G276HLA), it worked perfectly for about a month. Today, when I was working with SolidWorks, blue screen of death appeared 2 times and I have to restart my laptop. After the reboot, Windows does not detect my second monitor more, I tried my best but no luck, please me have this problems.

  I use an HDMI cable to connect the laptop and the screen...

  Best regards

  Hyouka

  Personal laptop is limited to the installation of other equipment, graphic monitor (s) push resources. If ram memory

  is maximally, & the BIOS settings are set to a different monitor, Direct X updates, graphics software are updated, then

  We should be able to run a reg monitor... Chk, go in run or cmd, type: DXDIAG run Direct X.

  Also, the BIOS settings are critical, uninstall the default, add new ones.

• Completed critical Windows blue screen process or you quit

  Blue screen ' critical process you leave or repealed. ".

  Hello, for some reason, another a computer was awake from sleep, he went to a blue screen. There was a technical information at the bottom of the page read, STOP: 0x000000F4 (0 X 0000000000000003, 0XFFFFFA8003EDE060, 0XFFFFFA003EDE240, XFFFFF 8000C39EDB0). The number may be a bit off, after writing messy, but it must be identical. The screen will not disappear, even after 30 minutes. Is the BIOS or Windows 7 must be reinstalled or restored?

  Hello

  See this article:

  You receive various Stop error messages in Windows 7 or in Windows Server 2008 R2 when
  you try to resume a computer that has a large hard drive SATA.
  http://support.Microsoft.com/kb/977178

  -----------------------------------------------------------------------------------------------------------

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available from the OneDrive or other
  file -sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ================================================================

  BCCode: F4 0x000000F4

  Check and reinstall the cards memory and cables (at both ends where possible) in fact
  delete and replace - do not just tight. On a laptop computer on all you can do is reinstall it
  memory and possibly check the connection/contacts on the hard drive. Memory could
  be the problem, so if you have more than 1 stick swap them in and out to see if the
  problem follows a stick or try the new memory. Antivirus/anti-spyware/security programs
  have been known to cause or have a role in this matter.

  More general patch updates day and low level chipset BIOS drivers and other software to control.

  Also check the wiring on the hard drive.

  =========================================================

  Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION

  CRITICAL_OBJECT_TERMINATION bug control has a value of 0x000000F4. This indicates that a process or thread crucial to system operation has unexpectedly is released or ended.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  CRITICAL_OBJECT_TERMINATION parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The Terminal object type: 0 x 3 : Process of 0 x 6 : Thread
  2	The endpoint object
  3	The name of the process image file
  4	Pointer to a string ASCII containing an explanatory message

  Cause

  Several processes and threads are necessary to the functioning of the system. As they are completed for some reason, the system can no longer function.

  BCCode: F4 0x000000F4<-- read="" this="">
  * 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

  ==================================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant
  (also, Windows 7 and Windows 8).
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen
  of death "crashes and displays the information about all crashes in one
  Table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista (also Windows 7) Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Firefox does not completely uninstall

  All begins innocently enough that these things don't...

  I use a Dell Dimension 5150 XP Pro with Service Pack 3.

  When I finally (recently) has decided to install Firefox, I tried integrates with Win IE 8. I don't think not of what add-on I installed it, but it worked well with the exception of a single Web site. The password box automatically fills with an unknown password that disappears when clicked on. Normally, in the past with IE 8, when I typed the username and my password, it overrode the outstanding. It worked well once in Firefox, but after that the default password overrides mine and I can't access the site properly (it can be seen, just no model no downloads, poster or comment on the son or previews of the threads can be seen).

  So, I used CCleaner to completely erase history, the Cache, passwords, Firefox etc. That did not work. I uninstalled Firefox from the control panel in Windows XP Pro (but the case was still under Program Files and Firefox Mozilla desktop icon was always on the desk.

  So, I uninstalled Firefox, then uninstalled IE 8, restarted the computer and reinstalled IE 8 and always noticed that the Mozilla folder and icon were always on/in the computer. I also disabled MS Silverlight in Firefox (I never used in for example)

  So, how to separate Firefox IE 8 and how to replace the default password?

  Thanks in advance.

  COR - el,

  First of all, let me thank you for all the time and effort to try to solve this problem (actually, two of them).

  After several hours, making several system restores, uninstalling and reinstalling Firefox and I.E. 8, I finally decided to spend $129 (later it became $199 for software support coverage a year with Dell.) We spent about 2 hours (with the help of the free 30 day trial of Revo Uninstaller Pro to completely uninstall Firefox and I.E. 8 (with CCleaner and 3 Firewall de Comodo spyware blocking software I had installed on the computer.

  The main problem was in fact due to having the ClickFree of Iomega software installed as a backup of the system in the case of the blue screen of death. As an external hard drive, I can start the USB port with the software window. Now, I thought that as causing a problem, because to have it installed with the password to work and before installing Firefox. Also, I haven't had not updated of software (by plugging in the running) for some time. It runs in the background, in order to keep the changes as they are made, but as I said, I was refreshed (make a backup update) for some time.

  Regarding the password, wellllll... There is a saying about mercury retrograde (which excludes the communication and transport) havoc with the electronics and communications (letters or emails are sent or will be delayed or be sent to the wrong recipient or misread). When I went to type the password which ended in "ing" I had misread to read "uh." I can actually read enough good - usually - but not this time. DUH!

  If the problems are solved. Thank you once again. Your advice will not lose. I went to the links you provided and saved the pages for later use.

• I left my computer on overnight, (playing the music on a youtube video) and I woke up to a blue screen of death. What does that mean?

  So I went to sleep last night I left my computer on playing a Youtube video that was about 45 minutes. When I woke up and looked at my computer screen, I discovered that I had the blue screen of death. Was this a memory problem? My computer could not handle being on all night?

  I have Microsoft Security Essentials, I scanned my computer (quick scan) and it found no virus. Should I just not leave my computer all night next time?

  I'm moving your message to the performance and maintenance of the forum for Windows section.

  The cause of the BSOD is generally not a virus. Details of the BSOD, including the potential cause, could be able to be determined on the basis of the error information. It could be hardware, memory, overheating, etc..

  -steve

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973