MSI Unattend on closed network (no internet connection)

Similar Questions

• Establishment of a network without internet connection wifi

  I'll set up a wifi network in a place WITHOUT an internet connection.

  I have an Airport Express to the location and my MacBookAir.

  I have a Samsung smart TV in the place and I would like to use it to watch the content on my laptop (iTunes and elements in the movies folder), but can't find a way to do it. I tried an AppleTV 3rd generation, but which will not work because it requires an internet connection to complete upward. I'm not having luck with Airplay or mirror screen either. I tried a Thunderbolt/HDMI converter and I can get the picture on the TV, but the sound comes through my laptop. It is annoying because the TV is connected to a decent sound system.

  The TV has two HDMI ports, one for the cable/satellite and one for a DVD player (MHL / DVI). It also has an ethernet port and a USB port.

  I would like to * fine * want to stream from my laptop to my TV, but if I can't do that, I'll do it, installs for all cable set up will get the video and audio into the TV. Y at - it a box of streaming that doesn't require Internet?

  Welcome suggestions, especially if they are in basic English, I'm really bad at the net jargon.

  Thanks in advance!

  You can be very sure that other people have tried.

  Solution of workaround for apple tv without an internet connection?

  Just using a tethered phone or even dial-up internet so that DRM can work would help.

  http://physedagogy.com/2014/09/25/no-Wi-Fi-no-problem-using-Apple-TV-to-mirror-y our device without wifi.

  A lot of blogs on this topic and a lot of useful info in some of the answers.

  Y at - it a box of streaming that doesn't require Internet?

  Loads of them... look for the Plex.

  The problem is (most legitimate at least) media sources tend to put a priority on the establishment of copyright law.

  I tried a Thunderbolt/HDMI converter and I can get the picture on the TV, but the sound comes through my laptop. It is annoying because the TV is connected to a decent sound system.

  Switch sound on hdmi.

  IA-Thunderbolt-HDMI-connecting-to-HDTV http://Apple.StackExchange.com/questions/92493/How-can-i-Troubleshoot-no-audio-v

  Again, you are not the first to have the problem... loads of experience if you googled around to find out how to get his work... or if the laptop is a model then it might be impossible.

  Apple makes things difficult when you don't have internet... it is just to have a tethered phone and really just do the little bit of work involved in the installer... or the same 56 Kbps dial-up modem.

• Bluetooth network and Internet connection sharing problem

  I am putting in place a network via Bluetooth between two computers later with Toshiba Stack installed and to share the Internet connection with the second computer.

  On the computer of trees I put Internet connection sharing, and for this reason, it automatically assigns addresses TCP/IP for the Bluetooth Personal Area network (192.168.0.1).
  On computer 2, I put everything to get it automatically. Firewall (Kaspersky) disabled.

  When I connect 2 Bluetooth devices, everything looks fine, the 2nd automatically gets the IP address, I can ping both computers and Internet works also on the 2nd computer, for a few seconds! After that, it appears as the 2nd computer is disconnected from the network... what could be the problem?

  In the case of the observer under the System tab, I found information like these:
  2nd comp:
  The system has detected that the network \DEVICE\TCPIP_{E44D18EB-91F5-4 adapter has been connected to the network and launched a normal operation via the network card.

  The browser has forced an election on network \Device\NetBT_Tcpip_{E44D18EB-... because a master browser was stopped.

  and the 1st model also appears this:
  The system has detected that the network Bluetooth adapter... Area Network - Packet Scheduler Miniport has been disconnected from the network, and the network adapter configuration has been released. If the network adapter was not disconnected, this may indicate that it has malfunctioned. Please contact your vendor for updated drivers.

  In your case, I would look at the following Web site:
  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/HOWTO.html
  It lists the following document:
  "Internet on PDA via PAN using Notepad as a gateway."
  In your case, the PDA is another laptop, but the procedure should be very similar.
  I would check the firewall settings later if it still does not work.

• printer deadline on 1 computer in local network and Internet connections

  Windows 7 ultimate 32 bit running. Just a week ago I experienced a problem to stay connected to the internet and my printers. There was the time I surpassed all in answering emails, times when I was on FaceBook, e-mail does not seem serious if I am in outlook or on the host IP page. The only remedy I have is to restart and start all over again. I tried to use "last" of 2 months without change. Any ideas on what is the cause? Should I reinstall windows? Can I do a repair said from another machine running ultimate? Not sure that I trust a repair disk from the machine that is time.

  -the dangerous Dan McGrew

  Expired A while trying to ask 5 minutes ago.  Grow old...

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you are facing problems with an internet connection in Windows 7.

  I imagine the inconvenience that you are experiencing. I will certainly help you in this matter.

  Were there any changes made to the computer before the show?

  Please follow the steps in the link.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope it will be useful. If you still have questions, please reply and we will be happy to help you.

• HP Color LaserJet M277n MFP: HP Color LaserJet MFP M277n, no problems with scan to folder network and internet connection.

  I just bought a 277n MFP which I am running wireless. I have problems with:

  1 - the printer is connected to the internet (no problem connecting to the network and printing)

  2 - definition of networks for scanning file (this is how this problem started because I tried to update the firmware)

  1.

  Searched the forum and found some good articles. Tried to restart and change the DNS as shown without success. Other means?

  2. follow-up guide how to set up an SMB shared folder, but without success.

  I shared "\\Johans-MacBook-Pro\users\johan\documents" under OSX and did the same thing in the printer web setup. Even tried with the entrance of my user name and password. When I press 'save and test' I don't have that "the test failed. Try again. »
  Any suggestions?

  Best regards

  Johan

  Hi @Johan84,

  You can use DHCP or an IP fixed, but you will need to set the DNS.

  Disable the IPv6 setting on the printer.

  Go to the printer settings.

  Configuration of the network.

  Network services.

  IPv6.

  Turn the power off.

  These steps should help with scanning to email.

  Let me know. Thank you.

• How to tell if someone is using my network or internet connection w / my password

  Ok.. So I let my old neighbour use my network providing him with my router username and password of my network. Now his family of very strange... possibly use their computers to connect and play games on Facebook and emails. They have no internet so it must be on my network. fix? Can I use mngr. to view the process and from that task? Help, please... I know I was taking a chance here, but I have confidence in him.

  Thank you kindly

  Sunday, September 14, 2014 02:11:07 + 0000, Slamina wrote:

  * OK... So I let my old neighbour use my network providing him with my router username and password of my network.

  Always a bad thing to do, in my opinion.

  Now his family of very strange... possibly use their computers to connect and play games on Facebook and emails. They have no internet so it must be on my network. fix?

  They could also use some other wi - fi router, but you are probably
  correct that it is yours.

  Can I use mngr. to view the process and from that task? Help, please... I know I was taking a chance here, but I trusted to him.*

  If I were you, I would simply change the password of the router. Do not
  worrying about if they used it, stop using it more.

• wireless network and Internet connection problem

  I had a yellow triangle on the network icon, but I fixed,

  now no icons on the network icon

  

  ____________________________

  

  __________________________________

  

  ___________________________________

  

  but same problem

  I re - install the adapter wireless but same problem, I can not open any site!

  Same problem,

  Thank you

  Please restart your computer, wait 30 minutes for the system to operate before downloading more information so that the impact of the changes can become apparent.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• Closed network communicates not problem

  vCD 5.5.5.3153714

  ESXi 5.5.0, 3248547

  Installation of networking

  • External network, Internet access
  • Routed network with an Edge gateway connected to the external network
  • vApp network

  Need

  Environment where multiples of the same TIME will be executed at the same time (identical virtual machines)

  Question

  Virtual machines can not connect to the Internet in a closed network

  Test

  • Computer virtual connected to the external network has Internet connection
  • Computer virtual connected to the network has Internet connection (NAT and firewall active)
  • Computer connected to the closed network virtual has NO Internet access (NAT and firewall active)
  • VM connected to the TIME that has a connection to the external network has NO Internet access (NAT and firewall active)

  A device of vShield edge gets deployed when fencing is configured but VMs seem not to be able to communicate on the external network.  Any input or thoughts on the issue or the direction where look would be greatly appreciated.

  It was a problem with the physical network layout.  Once back-end switching was corrected all worked AW it should.  Thank you for your help

• Internet connection Cox Cable & Airport Extreme

  I had the last three or four months a problem with Internet cable fall suddenly. All the lights on the modem cable have no problem with the modem. The Airport Extreme base station has a green light, as well. I have to keep resetting the modem cable 3 - 4 times a day. The ISP is Cox Cable.

  It affects all the iPhone, phone Android, iPad and other Apple computer, we have. All lose connectivity at the same time. If I connect to the Mac mini directly to the modem cable by the cable network the internet connection gets dropped without using the WiFi network.

  1 does anyone know conflicts between modems Motorola and Apple Airport Extreme networks?

  2. what else can I check or try to fix it?

  Airport Extreme: How would I test for a problem with the unit master of AE? The only thing I can think to do is reconfigure AE units and using one of the older AE devices as master and see if that makes a difference, but it's a headache to do if there is an easier way.

  Our WiFi network consists of a base station Airport Extreme 802.11ac with two base stations older AE acting as slaves to the base ac station to expand the network throughout the House. All base stations are running the latest firmware from Apple (7.7.3 & 7.6.4 on two more former slaves). The light remained green for disconnects. We have previously disabled IPv6 in Airport utility on the base station to avoid potential conflicts with the Cox' months before the start of this issue of network.

  Cable modem: Motorola MB 7420 - Cox says he could be the modem, so I bought a new modem cable Motorola MB7420 to replace the former Motorola cable modem - always have the same reduced connection problems. The cable modem shows any change in status or lights during connections has dropped, but only reset the cable modem seems to fix the problem. The two modems are not any lights/status change, but there is no internet connection, even if a computer is connected directly to the cable modem once the connection is released. I kept it connected and had it remove the connection to the internet again after resetting the modem (hours between the drops).

  I tried to connect a computer directly to the modem cable with a network cable and had the same problem, so I thought that I had deviated from the Airport Extreme base station as the problem. Now Cox claims that something came out last week, discussing the problems with Apple routers and cable modems or their network. I can't find anything, but they are supposed to send me information later.

  Coaxial connection: Cox is not finding any disconnection or time in their voting for our modem registers. We had three times to check the lines as he first seemed extremely windy Cox and had a problem before with problems connecting to the pole. Who was waived. They tested the connection between the pole and the cable modem, and we get a signal strong; some problems on the survey for our modem logs (every two hours). There is no water in the connections between the pole and the House. We have checked all the connections of the coaxial cable between the outer box and the cable modem. Cox is to revisit all connections around our House to see if they can find no evidence of a problem upstream or downstream from our part.

  Network cables: I replaced network between the cable modem and AE cables as well as AE to a computer next to him - no change.

  1 does anyone know conflicts between modems Motorola and Apple Airport Extreme networks?

  There are at least two known issues with Cox here on Apple's Support communities:

  1. Cox started the IPv6 role. The current workaround is to configure your AirPort base stations to use IPv6: link-local only.
  2. The series of Arris/Motorola SB61XX modem is incompatible with 802.11ac AirPort base stations (potentially, 802.11n models as well.) This is not bad in themselves, they just don't "play well" together. I have not heard of all reports on the series of MB74XX... so maybe it's not the question on this point.

  To test the incompatibility, check the ARP cache. It must contain only around a dozen entries. Considerably more could possibly indicate a problem.

  Run the network utility > Netstat tab > select the option "Display routing table information" > click Netstat

  Note: For OS X El Capitan, network utility can is located in Macintosh HD > system > library > Basic Services > Applications, OR via the Apple Menu > about this Mac... > system report > Tools menu of System Information > window > network utility

  To change the IPv6 configures your airport most convenient base stations you use AirPort Utility, as follows:

  From a Mac:

  • Run the AirPort Utility.
  • Select the base and then station, select change.
  • Select the Internet tab and then, select Internet Options...
  • Change the IPv6 configuration to: link-local only
  • Click on save and then click Update.
  • Allow the base station restart.
  • Do this for each of your base stations.

  Starting from an iOS device:

  • Tap the AirPort Utility to run it.
  • Select the base station.
  • Press Edit.
  • Tap advanced.
  • Tap on IPv6.
  • Change the IPv6 configuration to: link-local only
  • Type actually.

• computers shows no internet connection but can access the internet

  Lately, my internet has been slow. Also, I had problems to connect to some sites to download some updates and product registration. I'd get a message that there is no internet connection detected. That's when I noticed that the network icon would increase from 2 computers with a blue dot on them to just 2 computers. I checked my "network and sharing Center" and it showed that I am not connected to the internet (red x on the line between the network and internet connection)... I can still access the internet and navigate well. When I tried to diagnose and repair, I get this message.

  "You need to register with the provider of internet services of this network to have access to the internet" and below "connections to Web pages are currently redirected to a different Web page"

  "Click to open the Web page, if it is an Internet service provider registration page you can read the registration information."

  When I clicked and it took me to http://www.microsoft.com/en/us/default.aspx.

  I turned my modem and the new, and it seems to connect again. I just started experiencing this recently (in the last week).  Can someone help me solve this problem?

  He seemed to have solved the problem. I went into the Device Manager and disabled my network card and enabled then again. I'm also done to restore my system to the rear before the problem started then uninstalled and reinstalled NIS2011. I have not reinstalled IE9 yet. Thanks for the help

• Unable to connect to the network with wireless connection on Windows 7.

  Original title: wireless Internet access

  I have good network and internet connectivity when I am connected via CAT - 5 to my router/modem.  However, when I access the wireless network, I always have good connectivity and access to internet but can't send or receive emails or access Web sites.  My client browser and internet messaging turns just until it times out.  Any ideas on the cause of this problem?

  Hi Michael,

  Thanks for posting on the Microsoft Community.

  I understand that you are unable to access e-mails or browse the site when you are connected using wireless network. I appreciate your time and patience to try to resolve the problem.

  1. What is the brand and model of the computer?
  2. What internet browser do you use?
  3. What mail client do you use?
  4. You receive an error message?

  This can occur due to missing updates, hardware or software problem on the computer.

  Initially, run the network troubleshooter from the link below, go to step 3.

  If the problem persists, then check out the link below which helps to fix the network connectivity issues. Wireless and wired network problems:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab4&V2H=win7tab2&V3H=winvistatab1&v4h=winxptab1

  Hope this helps to solve the issue if the problem persists get back to us. We will be happy to help you.

• Internet connection only in Mode safe mode with networking

  I was using the Internet at home, when I had a pop up telling me there was an anti-virus program download. I pulled out the window pop-up, rebooted the computer and turned on safe mode with network. I thought it was just a problem of virus/malware/spyware. Since I installed several programs to prevent/remove any type of spyware (virus, etc.), I decided to run in safe mode, just in case. I ran the and after he said that my computer was clean, I restarted the computer in normal mode. The internet, however, did more work. He said that the Internet connection was closed portals HTTP, HTTPS and FTP. He also recommended that I check my firewall settings. I use the internet in safe mode with networking, and it works here though.

  I'm not really sure what the problem is with the internet settings. I could really use some help!

  Hi AngelicaR,

  OK, you should now check your firewall settings, to do so right click my network connection on your desktop-> select Properties (or click Start-> Settings Control Panel-> network connection)

  Now right click on your connection to the LAN->-> Advanced->-online advanced, settings, settings-the default settings online-> restore default settings. This will restore the default firewall on your local network connection. Click ok on the screen and restart your pc to see if its working.

  If you find the same problem again and then come to the same path: required connection to the local network-> settings-> Advanced-> settings-online Exceprions-> Tickmark the HTTP, HTTPS and FTP, also tickmark "display notification when firewall blocks a program" that will help you the notification to allow access through the firewall. Click ok on the whole screen, restart your pc.

  I hope this helps.

• L755 satellite internet connection drops but stilll connected to the network

  Hello

  I hope one of you can help me. I have a laptop 13 q Satellite L755 nice for a year and a half.

  My problem is that I surf the net and suddenly my internet connection drops down. On Firefox or IE, I have a message with a triangular signal yellow saying: "your connection has be revived."
  I'm still waiting on my network but I can't access the internet.

  The strangness, is that my family other PC or laptop have no problem on the connection.
  This happens on the wifi and cable. At home or other places of connection.
  In France and the United States. So my conclusion is that there is a problem with my laptop.

  I looked around some forums. It seems that some have a problem with IPv6.
  I have disabled the option to use IPv6 on my laptop, but I still have the problem.

  Another comment: I play the Kingdom of the fortress online.
  Sometimes I disconnect from this game but I can still surf the internet for a few minutes before undergoing a total disconnection.

  Looking forward for your help.

  As this happens using WLan and LAN its really hard to say why your connection is interrupted.
  Have you tested the internet connection with fresh preinstalled system?
  I mean it is possible that some software / updates received or installed in the past it would affect.

• Equim has 200 - 15I: network - Internet connectivity

  Hi all

  Just joined the forum. Its great

  I have a Toshiba Virgin! I have an Equim A 200 - 15I I bought a month ago. It was working fine. Since, however, this week, I'm not able to connect to the internet. IAM on Vista Premium.

  Connectivity shows that I am connected to the LAN or WLAN (if I use an ethernet cable). However, I am not connected to the internet. The small blue icon (such as the map of the world) isn't here although the network icon says "connected". Evrrytime I open IE, the display shows 'page not available '.

  Ive has run the diagnostics - ok. Device Manager indicates NICs (lan and wlan) are working properly. At the command prompt, I renewed the IP parameters... still no luck

  Help, please... Is it a hardware problem (as I still guaranteed him)

  Thank you very much

  Rambeau

  For me, it seems that the router abandon themselves. Restart your router, and then try again.

• I have my internet connection by wi fi my network is configured but my printer is not printing I uninstall this driver I reinstalled it but still nothing what to do?

  I even uninstall my printer, reinstalled it and still nothing

  I have a window that opens with network problem

  I tried beautiful I find nothing

  I do have internet connections through wi fi

  What do I do

  Thank you for your answer

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  On the top of this page of answers (English) v -click and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">