MSN disappears after each shut down my PC

Similar Questions

• MacBook Pro Late 2011 startup questions - SMC reset necessary after each shut down.

  I was asked to look at a friends end 2011 Macbook Pro.

  Initially, it seemed dead. No power, no response. I did the Shift + Command + control + Power to try to reset the SMC nothing helps.

  I opened the back and disconnected the battery and the magsafe. I help the power button down for 5 seconds. reconnected the dough tried power on and it didn't work until I plugged the magsafe. Ah ha I thought it, BUT. Once started it works very well, some check everything looks good and battery shows healthy with 70% of load.

  I restart the machine and it starts fine. HOWEVER. I stop the machine and I'm back to square one. Power supply photo and battery connected.

  So I rinse and repeat. battery disconnect power hold button wait 5 plug in back and then turn it on. As before it works only after the power supply was ALSO connected. to test this situation I tried again without connecting the battery and just the power supply. Since then only the battery was in, nothing until that I plugged the battery ALSO.

  So the Macbook will start only after a stop if the battery and power are both removed, button / help for 5 then BOTH the power and battery are reconnected.

  I've seen people with similar questions but no one seems the specific symptoms that it requires this reset each STOP but restarts not on the list.

  Clues, help, correct?

  See you soon

  Paul

  Hi deep:

  Have you tried resetting the NVRAM?

  Try reseting NVRAM. How to reset the NVRAM on your Mac - Apple Support

  Then try reseting SMC. Reset the management system (SCM) controller on your Mac - Apple Support

  Then, try a safe boot. Safe mode try if your Mac does not start-up

  Also, see this help file. If your Mac will not turn on - Apple Support

  Kim

• After I shut down the computer, he re boots itself after 5-10 minutes.

  After I shut down the computer, he re boots itself after 5-10 minutes. Weird. I tried to change the settings. Can anyone suggest anything?

  Hello

  1. How did you shut down the computer?
  2. are - it stop with the power button on the computer?

  If so, this causes the computer in a standby / hibernation
  If you shut down properly by clicking on start > stop, then you must wait until the computer is shut down before you close the lid of the laptop.

• ENVY 17 t-J100 Leap Motion: keyboard backlit ENVY 17 t-J100 Leap Motion edition shuts down after each power down.

  My brother has an ENVY 17 t-J000 Quad Edition. Only about 6 months. Its backlit keyboard remembers its state of on or off when it reboots or off. When he turns on his laptop back, the keyboard is always if it's him on when he turned off the laptop.

  I just got the ENVY 17 t-J100 Leap Motion backilt keyboard edition. But every time that I reboot or shutdown with the backlight on, it is turned off when I have the laptop or reset. So whenever I have to re - turn on the backlight. Very annoying.

  Anyone else with the jump movement 17 t-J100 having this problem? If so, I hope it's fixed soon. I also can't update the Nvidia drivers then perhaps we need a BIOS update to solve these two problems.

  I just checked to be sure. It turns off if the laptop is turned off and turned on then again - but if I just restart the kbd is running.

• Disappears from drive mapped after restart/shut down PC

  Hi all

  Help her please this problem.

  I could connect another network drive, but I got this X: drive which is missing when I restart my PC.

  Did the procedure below:

  1. open the computer by clicking the Start button, click computer.

  2. click on map network drive.

  3. in the drive list, click a drive letter.

  You can choose any available letter.

  4. in the folder box, type the path of the folder or the computer, or click Browse to search for the folder or computer.

  To connect every time that you log on your computer, select the check box to reconnect at logon .

  5. click on Finish.

  - And I can't just change the letter of the road network as it was the way with the different macros.

  I try mapping the command-line instead and see if it holds. Here's how:

  1. Click Start, find the guest orders and do a right click to use "run as Administrator".
  2. To the administrator command prompt, type, and then press ENTER:

     NET use x: \\server\folder\subfolder

     (replace the server in the folder that you map)

• Hibernation-disappeared from the Shut Down menu

  After disk cleanup, the word 'Hibernate' disappeared in the menu stop. However, he still goes to hybernation when you press the "sleep" button on the keyboard. (It was previously configured this way).
  Ran: powercfg-h on of the prompt, nothing happens.

  Thank you

  After disk cleanup, the word 'Hibernate' disappeared in the menu stop. However, he still goes to hybernation when you press the "sleep" button on the keyboard. (It was previously configured this way).
  Ran: powercfg-h on of the prompt, nothing happens.

  Thank you

  Your cmd is ' high '? The tutorial invites you to "open a command prompt . Was he doing?

  t-4-2

• Icons of apps and blackBerry Smartphones to disappear after each sync

  I just got my "BOLD" Wednesday 10 November 26. I took a few pictures and configure multiple e-mail accounts. I put a picture of my wife as the background of the screen. Whenever I have sync it with my computer things change. I have now no icons for my email accounts that I put in place and I don't have one of the photos I've taken. The profiles icon that allows me to define what type of ringtone or vibrate level I want disappeared, although I can scroll up to where it was. Can I have a virus or any other problem or is it just a user error.

  Help, please.

  Hi and welcome to the burkerich forums!

  I had not heard of that happening before.

  No data will be lost when you do the following: remove the battery while the device is activated.

  Remplacer replace after one minute, let the device reboot 1-3 min.

  See if the icons are returned.

  Were the photo in the memory of the device or on a memory card?

  Also, please specify the version of Desktop Manager you are using and how you

  Set options.

  Thank you

  Bifocals

• iPhoto book card and calendar each shuts down the system

  iPhoto slide show and Album both work normally.  The book features, card & calendar show a loading... indication, but almost immediately the activity stops and no entry except force quit is available.  A problem report is generated.

  A problem earlier with iPhoto had recently been resolved.  The problem and the solution are in the Discussion iPhoto 9.4.3 frequent crashes presented by iGardener December 14, 2015 and involves the removal of two of googlemap and S60v3.rar. html files The used at this stage iPhoto library is smaller... less than 200 photos.

  The above solution made me very happy and grateful for the discussion forum.  I have this post in hopes that I can return these functions of iPhoto.

  Greetings from Jerry-a-Tic.

  A solution to the problem that I reported when I continued to look for Discussions of iPhoto.  Specifically, MattyMiles interviewed on "iPhoto, photo books, calendars, cards of ' back on November 14, 2009.  A recommendation, due to old Toad, the user to verify the "Theme" folder to HD/Library/Application Support/iPhoto has led to a solution for the problem I raised.

  The Themes folder and the database file was, from its date, a new file, apparently created when I reinstalled iPhoto in a vain attempt earlier to solve the 'problem of crash induced Google'.  Fortunately, I had a copy of the folder themes, which turned out to be a backup.  Replace the existing folder and the Themes.db file to the location of the HD , solved problem.  A reboot is not necessary...

  Thanks to MattyMiles and old Toad.

  Jerry-a-Tic

• HP Pavilion 15 t: how to avoid the login password after having powered down and restart the next day

  After the upgrade to Windows 8.1, I have to enter my password, if I click on the 'Rainbow' at RPM screen and moving toward my office after I shut down and restart by pressing the power switch.

  However, if I click on the power icon and select [Restart], the rebstarts 15 t on the desktop (I want!).

  I ran "netplwiz" and all options offered, but none of them ignore the display of password to the power on - so frustrating!

  H-E-L-P

  BobO'B

  Hello

  Hope the following video helps:

  https://www.YouTube.com/watch?v=-VOlZl7UmwQ

  Kind regards.

• Is it possible to shut down the computer after the call to a draw on Chess Titans?

  Is it possible to shut down the computer after the call to a draw on Chess Titans? It does this to me almost everytime I have the King stuck, but when my King is stuck, I lose each time. WTH?

  original title: circulation of Chess Titans

  If its your turn and you can make any legal move either with any piece, but your King is not in check, it is then deadlock. Deadlock is considered a match draw in standard chess rules. For examples, see:

  http://en.wikipedia.org/wiki/Stalemate .

  If your King is in check and you can immediately do a legal process to get out then check it's checkmate. For the person who the King is in check, this counts as a loss. For examples, see:

  http://en.wikipedia.org/wiki/Checkmate .

  In the two scenarios above, can even vice versa (it may apply to your opponent too).

  If the above explains what you see in Chess Titans then the program is correctly following standard rules and it is not a bug in the program. If she does not explain what you see then please explain more precisely the scenario.

• my computer shuts down about 2/3 of the way after that the progress indicator starts and stops... any suggestion as it turns on again?

  Try to update of Itune, update got stuck, I turned to the computer off, impossible to restart... the indicator stops about 2/3 of the way and the computer shuts down again...

  Start Safe Mode removes the system caches that can help.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then try to update iTunes.

• my keyboard has sometimes unresponsive, despite verified the above. Then it works again after I have shut down and restart my mac. is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the ti

  Jin

  Sometimes, my keyboard stops responding, despite the checkist troubleshooting.

  Then it works again after I have shut down and restart my mac!

  is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the time... also openoffice document prog...

  What else could be?

  I just replace the keyboard with a new one, but the problem persists.

  my mac has also been in mac repair and they found nothing wrong.

  Thank you!

  Please run and view a report of EtreCheck http://etrecheck.com/

• iMac won't restart or shut down after having been 10.11.5

  He said title. My iMac was fine before the update came through yesterday. I went to reboot tonight because the RAM used was realllllly high and I thought a solid reboot after update from yesterday could be a good thing (don't ask why - just my logic)... and surprise! -He has authorized the menu bar and leave viewfinder, but would not closed at all. I could always use the dock to load and use applications. I saw another thread that mentions deleting stuff from Wacom. I went and emptied all of my items found from Wacom. Still will not be closed. I have reset several times VRAM. I can do a forced shutdown, and he'll sleep ok. Activity monitor shows nothing super weird, even if it always shows Wacom and Tablet drivers running.

  Anyone else running into this? Or have an idea?

  Please?

  Hello..

  Safe Mode boot removes the system caches that can help after an OS X day or level.

  Upper left corner of your screen, click on the Apple  > Shut Down.

  After your Mac stops, wait 10 seconds, then press the power button.

  As soon as you hear the startup tone, hold down the SHIFT key. You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  Release the SHIFT key when you see the gray Apple logo and progress indicator.

  Once you are in Mode without failure, return to the menu Apple . In the drop-down list, click: reboot

  On Safe Mode

• Satellite P300D-h-13 restarts after I click on shut down

  Brand new Toshiba P300D-h-13 with preinstalled Vista 32bits.
  When I click on the start menu--> Shut down, computer laptop restarts and after the reboot, when I click again on farm, laptop off of the beautiful.

  How can I solve this problem?

  BIOS upgrade to the latest version

  Hello

  Have you connected external devices to the laptop? This can cause the reboot, so remove them.

  Also make sure the Wake up on LAN is disabled. Check in the BIOS and the device of the WLAN card Manager.

  Welcome them

• Z3200: Z3200 after Propairing Ink System: Shut downs

  We have an opportunity Z3200 who asked two print heads. Replaced all, and all was well for a while.  Turning off the plotter, removed from power for 1 week.  After turning the power on again the Z3200 boot. Then the screen turns off, shuts down the power botton, but PS fan will continue to operate.  In this state the power button lights not Z3200 return.  The rear power switch must be turned of, and then turn on the printer will go through the same process, and then closed, fan on again.

  Dianostics running, transmitted electronic Mod. Past of transport.

  Ran clear the NVRAM - OK

  Printer asked all print head needs to be replaced, Ok, all removed and reinstalled everything.

  Printer entered prepairing system print, but as soon as it beeps all makes, the printer stops back, empty display and the dark green power button, but the fan of the power supply running.

  And suggestions or solutions out there?

  Spoiler (Highlight to read)

  Thanks for the information!

  Here's what worked for me:

  After going around in circles with this, I removed all of the print heads, tool to clean all the contacts, two or three times.

  Then after seeing a sort of film on the back of the print heads, their contracts, I cleaned the institutions.

  I saw this being a problem on of the Z6100.

  Then I repeated the process clear NVram.

  Has passed through the stages of replacement print heads.

  The system went wrong the 4 process and did not fail this time.

  Adding paper, crossed all the lines and the color calibration!

  Back online.

  [Everything was fine before, until I stopped and unplugged a few weeks ago]

  Thanks again!

  Spoiler (Highlight to read)