iMac won't restart or shut down after having been 10.11.5

Similar Questions

• Laptop Shuts Down after having turned it on

  Hello

  My laptop has fun close within 3 seconds to turn on. Research I've done shows that the fan is not operating, causing overheat the device, but I wanted to see if there was other reasons why this could happen.

  I restored my computer to factory a few days ago, and it only started happening after that.

  I tried to run a diagnosis by performing a "PC Health Check' after pressing F10 at startup, but I didn't have the option to do so.

  Aside from trying to do a health check on the PC, there is no errors popping up at startup.

  My laptop is running Windows 7 and this is the Pavilion DV6 model for 2010.

  Any help on this would be greatly appreciated.

  Thank you!

  Hello Roadrage77,

  Welcome to the HP Forums! I hope you enjoy your experience!

  I understand that the computer stops a few seconds of setting on. I'll see what I can do to help you!

  It seems that the computer might have a hardware problem, because the fan does not work. However, there is a chance that there is a software conflict. I think that you should try to reinstall the operating system before anything else. It will deal with it if the problem is software partner. For more information about how to perform a system restore, please reference this document: performing a recovery of system HP (Windows 7)

  Please try this and let me know what happens. Thanks for posting on the HP Forums. Have a great day!

  Mario

• My PC will not restart or shut down

  Original title: problem with my pc

  HELO

  I would like to know why my pc won't restart or shut down.

  Can U help me?

  You can clean clean boot
  http://support.Microsoft.com/kb/331796
   
   
   
  --
  ..
  --
  "Smiley Face" wrote in message news: 2d-09a0ba35 87-4966-868e-fac601abb24d...
  > If have a computer acer laptop.
  >
  > When I want to close my laptop when I'm actually it works, just do
  > nothing. No error message does nothing.
  >
   
   

• Unable to restart or shut down Windows when a USB modem is connected to the computer

  When I plug a USB modem, either 3 G or dial-up, my computer will restart or shut down. It complements the normal stop the procedure, but instead of actually put back in power, the screen becomes black and stay like that. After a manual stop, Windows reports that he is recovered from a serious error. I have had this problem since I first installed Windows Vista about half a year ago. When there are no modems connected to the computer, it restarts and stops normally. In addition, printers and USB flash drives appear not to cause to happen.

  No idea how I could solve this problem? Thank you.

  Works fine now. Another bug of Microsoft.

• Windows 8 maintenance keeps asking to be executed, then it shuts down after 10 minutes and repeat application to be run again

  Windows 8 maintenance keeps asking to be executed, then it shuts down after 10 minutes and rehearsals require to be run again, I turnit on and it turns off after 10 minutes .This continues to repeat and it never ends, how do I fix?

  Original title: maintenance of windows 8

  I suggest that you run the following commands from a command prompt (Admin).

  (1) sfc/scannow, when finished and restart

  (2) Dism.exe / Online/Cleanup-Image /ScanHealth

  (3) Dism.exe/online/Cleanup-Image /RestoreHealth Reboot and try to perform the maintenance, if the problem persists restart sfc/scannow and restart the computer.

  Hope this helps and if you need any additional aid station and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe."-John Muir

  If this has answered your message please mark as answer

• My computer guard shut down after use of a few minutes.

  My computer guard shut down after use of a few minutes. When I re - start insiders 'fix the beginning upward.'

  Startup Repair FAQ: -.
  http://Windows.Microsoft.com/en-AU/Windows-Vista/startup-repair-frequently-asked-questions

  See also:
  http://Windows.Microsoft.com/en-AU/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/Windows-Vista-keeps-shutting-down-without-warning/1963241a-A4C5-4BDB-8bdf-b3e95245bfa8

• The screen on my Pavillion g6 shuts down after 60 seconds, how can I change this? cc = us

  The display on my Pavilion g6 shuts down after 60 seconds, how can I change this?

  Help, please!

  In the Power Options found in Control Panel under system and security.

• Printer Hp 6520 automatically shuts down after a few hours

  Original title - printer hp 6520 problem

  My new photosmart 6520 automatically shuts down after a few hours, it disconnects from my Win7 machine without using the material removal tool, if I get a nice loud bang when it does.  It is connected through the usb port on my Pavilion.  I don't mind to go to sleep, but I don't want to disconnect completely, because when I send a new print job, he didn't wake up automatically and print, I don't have to feed it manually upwards then it prints very well.  Any ideas on how to solve this problem would be greatly appreciated.  Thanks in advance.

  I could join HP support on this issue this morning.  There were two things - first HP printers now have a built-in surge protector so you should not connect it to an another surge protector.  Second, the default printer is delivered with activated automatic stop, turning off will do sleep, but not to turn it off, so that it accepts print jobs whenever one is sent.  So, if that helps anyone, good!  And thanks also for your help.  :^) gene

• My new printer HP Officejet Pro 8600 causes my computer shuts down after 5 minutes.

  My new printer HP Officejet Pro 8600 causes my computer shuts down after 5 minutes.  Is there a way to find out why?  Is it because I connected to a USB port rather than wireless and telephone connection.

  Original title: computer spit

  I called the store where I bought the printer.  They suggested that I have download the latest driver

  from the HP website.  I did it and it seems to have solved the problem.

• Windows 8 on Bootcamp. Kernel_security_check_failure regular on restarts and Shut Downs.

  MacBook Pro 13 retina

  8 GB RAM

  Bootcamp 5.0.5033

  Windows Fresh 8 upgrade from fresh Windows 7

  Hello

  I've been using Boot Camp for several months, running Windows 7 on my Mac. I need extend partition, so I decided to uninstall the Windows 7 partition (using Boot Camp on a Mac), then reinstall Windows 7 on a freshly prepared partition. Who had finished I immediately upgraded to Windows 8.

  I installed the Boot Camp of support software, and as far as I can tell all my drivers are up to date.

  However, every time I restart or shut down the computer, I get a BSOD with Kernel_security_check_failure. I tried to study it using WinDbg, but all this can point to what is NTKRNLMP.exe which shows that it is caused by something else, and it is not clear what.

  I tried to go through this process twice, so I'm on my second fresh install in Windows 8 now.

  There is no other problems at all on Mac or Windows, it is not never failed except when it restarts.

  I ran a memtest with no problems found.

  I have about this problem over the past months, I have been using Windows 7

  The only time I saw it crash not was when it was connected to an external monitor which leads me to believe it's a problem with the display driver. I tried all the drivers from the Boot Camp, Windows update software and update the Intel utility display and none of them solve the problem.

  Any help or this point troubleshooting tips would be MUCH appreciated and I would be interested to hear if someone has the same problems.

  Thank you!

  Chris

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• Satellite L870-165 does not work after having been repaired by their service

  Warranty Toshiba Laptop does not work after having been repaired by their service twice.
  Model: Satellite L870-165

  Computer does not start, rest with black screen showing: No bootable device - please restart your system

  After restarting the same thing happening again.
  I called incident phone Toshiba and after trying several options, I said take it for repair service.
  Told me first of all it was the hard drive, then called me to indicate this resettlement and ultimately it was the motherboard, what would have changed. The next day, being chosen computer repair returned to give exactly the same mistake, due to a malfunction only one night.

  After another call to 902 Toshiba warranty service, I went back to take the service, this time I changed the hard drive. When I arrived home the computer does not start only once, again gives the same error.

  I think this team comes with a default factory that his solution is not easy, because even the technical service told me I didn't know what to do with it.

  Sorry to hear all this. Unfortunately, we can not help you much so try please clarify this service. They help you with your laptop even if all must be exchanged.
  > Warranty Toshiba does not work after having been repaired by their service
  To be honest I don t understand this sentence. How old is your laptop? warranty is already expired?

• Canon 5 d MK IV LiveView stops immediately after having been pressed with Tamron SP 70-200mm F/2.8

  My Canon 5 d MK IV Live View will stop immediately after having been pressed with a Tamron SP 70-200 F/2.8 Di lenses.

  I don't see the problem happens with my lens F / 2.8 Canon 24-70mm.

  This problem happened in video mode.

  I hope that there is a setting I have to toggle to make this objective work in Live View mode?

  Thank you

  Mark

  I spoke to my local camera shop, they said, that it should be referred to the Tamron for the update of the firmware, they said, that Tamron has a fairly good hand around time of approximately 5 days. I've probably will send mine once I'm done with a shoot.

  The lens works very well for me, normally, the only problem for me is Live View. If this is not the case, use the LIve View, it seems to work great so it's not paralyze me right now, but it would be nice to just get it fixed if Live View will work.

  The camera is also on Firmware V1.01 so their will be updates firmware for it also and as a previous post said that Canon will also address the issues with 3rd party lenses. Great! After that all the Canon doesn't want people who have glasses of third parties avoiding the body of the camera for this problem. It's logical Canon would solve this problem.

  So far it is a minor bump with third party lenses. I've always been able to work with my Tamron and Sigma lenses. Just a couple of workarounds until the firmware is updated. It isn't a deal breaker for me. This camera is a pleasure to shoot with and I am very pleased with the Canon has advanced in the development, image quality with the dynamic range and low light performance. I am happy and have no regrets.

  I would still recommend this camera to a friend.

• Must the updates and hot fixs remain on the hard drive after having been loaded? Is the information provided in the operating system?

  Must the updates and hot fixs remain on the hard drive after having been loaded?  Is the information provided in the operating system? Or do the lonely stand.

  Original title: need for disk space

  Here are the official specifications of Toshiba for your PC...

  http://support.Toshiba.com/support/staticContentDetail?ContentId=638405&isFromTOCLink=false

  All interface PATA (IDE) connectors are a standard 40 pin.

  I know that there is no restriction on the mixture of ATA drives with different speed capabilities and no restrictions on what cable you use, whether 40 wire or 80 strand (but still 40 pins).

  Faster drives will only work at the speed of the slowest car on any cable and 80 strand cables are needed to make ATA66 or higher drives run at their native speed.

  In addition, no player can work faster than the motherboard chipset permits, in your case ATA66.

  My provider of trade has still some disks 3.5 '' PATA in stock, but these are becoming harder and harder to find. Indeed, it is possible that production has ceased and that suppliers are just exhausted stocks.

  I can certainly say that, when repairs this technology were more frequent, I never had problems with discs theoretically faster on the same cable as slower drives, nor by using faster on 40 cable strands discs. In fact, of many penny pinching manufacturers (some of them major) regularly used for the optical drive and hard drive on the same cable as the motherboard has two connectors, resulting in a decrease in performance on the disk hard (although most of the people would not have noticed the difference). Sometimes, the cable would be 40 strand (understandable if you are penny pinching) and sometimes the cable would be 80 strand (laughable if you are penny pinching because they are [were] more expensive).

  Pass your question about vacant below the sound card. Unless your text confused me, this space is for expansion cards no disk drives. Space that you reference is probably to the back of the PC. Hard drives are normally located toward the front of the dedicated PC "berries". Unfortunately, I could find no photo on the Toshiba site, and still less those internal.

  Tricky

• IMac restarts or shut down normally

  I have a problem with my Imac where I won't shut down or restart (it begins to process then stalls after that applications disappear on the home screen). I tried to reboot in safe mode. Can anyone suggest a fix for this mess?

  What happens when you try to reset the PRAM as directed by the iMac SMC and reset the PRAM?

• iMac late 2012 will not shut down or restart

  El Capitan, my iMac running will not stop or restart by choosing shut down or restart. I have to hold the power button to close and then restart your computer manually. Any ideas?

  Please post a report of EtreCheck of your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.