Similar Questions

• Support multi-screen in mode 4

  I was under the impression that view 4 was going to be true instead of the multi-monitor support rdp version and using splitview.  We were waiting for version 4 so we could ride on all desktop computers, and I still don't.  In fact, when I choose multi-monitor it won't cover even two monitos now.  Someone at - it ideas?

  In this capture customer screen display is running in windowed mode and it would not use or adapt to mutimonitor as the application window is treated as a solid glass.

  In the capture of the attached screen shots you will notice I have spin a session which begins in multi-screen, changes of are displayed and finally back to multiscreen as follows.

  Start view customer / login / multimonitor desktop selection / select / select Connect (PCoIP is my default)

  See screen-one shot

  I can take this mode session window as yours, by selecting exit full screen in the bar of the shadow. As you can see, the View Client is running in windowed mode and adjusted the desktop virtual to fit the window and tilted in single display mode resolution.

  See screen-two screenshot

  I also took a third page where I manually expanded the Client of the view window on the two screens of my client. As you can see, even when he has automatically adjusted for virtual the desktop resolution to match the new size of the window.

  See screenshot screen-three

  This is the expected behavior in this multi-screen intervenes only when you start a session in multi-screen mode. It does not knock when you are in windowed mode. Looking for multimonitor when running in windowed mode?

  Affects your screenshot, it appears that the resolution has not been reset or adjust which is an indication that the multimon parameters have not always taken. The virtual machine must be powered down at least once after the changes. Did you turn off the power or reset / reboot? A reset/reboot will not work.

  WP

• Fusion 2 and unorthodox multi-screen configurations

  General information

  -

  ---

  In Fusion 1.x, I've managed to work around the limitation of single display using a USB video adapter connected to the virtual machine. Worked surprisingly well and after seeing some performance issues with version 2.0, I decided to stay with 1.1.3 for awhile.

  Today, I upgraded to 2.0.2 and I am happy to say that performance problems have disappeared. I have therefore been primed and ready to try the double support native monitor.

  I used successfully screen of the MacBook Pro and a monitor connected to the DVI port. Very good, I like.

  But I also have a second LCD monitor hooked up to the USB adapter, and it's wherever I meet trouble.

  A momentary digression

  -

  ---

  With the card attached to the Mac USB, the setting "Use all displays full-screen" simply does not work, and due to the limitations of the Mac DisplayLink drivers, the virtual machine is too slow on the USB Monitor anyway. So relying on the Mac for lead all three screens is a non-runner - but I was ready for it.  :|

  The problem at hand

  -

  ---

  This has left me speechless, it's that I can't return to my former arrangement. When I reinstall the USB adapter to the virtual computer and extend the Windows desktop (I'm even not attempt to use "Use all displays full screen," because I know it will be too weird for words), I find that I can't move my mouse on the secondary monitor. All sides of the main screen are impenetrable, with or without svga.noHWCursor = 'TRUE '.

  Curiously, I can send windows to the other screen using certain features of UltraMon, if it is available for Windows. But I'm limited to interact with it using the keyboard. I guess there are some collisions here between Windows Media Monitor and Fusion, and my poor mouse is to take the shot.

  Short of attaching a mouse directly to the virtual machine (yuck), is there a way around this? Is there a VMX parameter which would disable the feature in Fusion 2 multi-screen display, or what I need to get off the virtual machine or back to the 1.x version of VMware tools?

  It would be a shame - otherwise I like 2.0.2.

  I don't think that there is a setting to revert to the behavior of 1.x, display management is not something that you can easily swap. I think you're right about the gap between what Fusion think is the usable area and what the customer thinks is usable as the cause of the observed behavior.

• No multi-screen HTML5 option is displayed in the presentation of single Source after the upgrade of RH9 project

  I opened my RH10 project and updated. Now when it opens, there is no other choice for Multiscreen HTML5 in the project settings or control panel available to Source monkey. The project has been generated/unreleased using WebHelp, but the idea was to be able to move in multi-monitor configurations. Any suggestions?

  Answered my own question. I went project Set-up/screen layouts, right click, chose the new provision of the screen and all added one by one. Then single Source layouts, right-click, new layout and choose Multiscreen HTML5 in the output Type.

  Not as easy to convert as I would have thought/expected so I'm leaving this here to help someone else.

• MAC PRO MULTI SCREEN OFF ROAD...

  Bus (20 gHz bandwidth) is a MacPro Thunderbold2 (end 2013) combined with AMD over-pants 300, allow the connection of 2 screens UWQHD at 60 Hz?

  (A) knowing a MacPro announced limitation:

  Use multiple screens with your Mac Pro (end 2013) - Apple Support

  (B) successful personally tested the following configuration:

  "Connection to a 34" UWQHD (3440 * 1440) display as a secondary screen on Imac27 ' Thunderbold (mid2011) port using a mini Display Port to Display Port cable.

  This configuration bridges for the limitation of the AMD Radeon of 512 MB of the Imac27 (mid2011).

  However, he has worked to keep a refresh rate of 60 Hz.

  (C) does anyone at - he tried to connect 2 * 34 "UWQHD (3440 * 1440) poster on the Bus Thunderbold 3 1 (ex: TB1 and TB2 ports) using a mini Display Port to Display Port (or native TB cable if TB screen like LG)?

  And this configuration works at 60 Hz?

  Final goal is to connect 6 UWQHD 34 "screen on a Mac Pro at 60 Hz.

  Thanks for your comments.

  I could now test the following configuration:

  2 screens on bus 1 to on the Mac Pro:

  Eizo ev2750 1 (2540 * 1440) on the TB0 port using an miniDP/DP cable

  +

  1 LG34UC88 (model LG with no port of TB) in 3440 * 1440 on TB1 port using an miniDP/DP cable

  Both work at 60 Hz non-interlaced.

  I believes that this positive answer my own question here above even if it wasn't 2 * 34 "UWQHD (it is always above the spec announce Apple).

  However, I have 3 questions to void it please:

  Q1: Anyone know if the AMD over-pants 300 since the Mac Pro supports the technology 'free' for the synchronization of AMD.

  AMD sent me to Apple because it seems Apple develop its own driver AMD cards used in Mac.

  (no answer until now...)

  Can Q2: Someone please explain what benefit we can get using a screen offering a port TB compared to a screen offering a port DP (the two being connected on a TB on a Mac port)

  It seems that we will get no graphical difference, but that the native CT will wake up faster than the RFP and offer chaining (for connecting a USB key or on the screen a light on the Mac).

  No confirmation will be welcome, thank you.

  Q3: Is it possible to change the TB on a Mac Pro parameter to tell the machine than on a TB specific port (ex: TB1) cable (and thus the signal) is DP.

  This would shorten the time to a screen using DP cable on port of TB of awakening. Thanks again.

  Best regards

  Michel0008

• HP Pavilion e17 - 148 ca: [URGENT] need response on the laptop screen went blank question

  Hello there, this is the Prince of the heavenly Crown of Canada here.

  I've been a loyal user of HP consumer level laptop for 2 years.

  It seems that there is a problem with my laptop screen display.

  For my part, this is the first time this kind of problem has occurred.

  For some reason, in my current (well, now its my last) session, my screen became totally blank on me and turned black, as if the laptop was in a sort out of power status, however, the power of the laptop was always and until the issue has suddenly decided to occur before my eyes , I had been using the laptop and was even working on a coding operating... some of you may know me as the creator of the heavenly System.ini Crown Configuration file.

  Apparently, it is a known issue with HP Laptop, and I don't know if HP is actively focusing on the question of setting so that it does not become an inconvenience to other users of HP laptops or buyers.

  Is there a known solution as to how to fix this kind of problem? This is very critical and I was in the middle of the tent to save the rest of my code in Notepad on my desk, but I would speculate that asides from the 2 files I could save, the rest would have gone unless I would be able to resume my last session which I highly doubt at this stage.

  If someone could please let me know as soon as possible, I would appreciate it a lot.

  ~ CCPOC Benson Lam

  Hi there @BensonLam,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the black screen. I'll be happy to help you.

  Please report the number of complete product from your computer. Check out the following, if you need assistance with this information.
  How can I find my model number or product number?

  Here are a few documents to help.

  Black screen or white with a blinking cursor after entering the Windows password

  Computer starts but the screen stays white

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Is it possible to do full screen Windows Media Center (native) on a monitor while being able to use the other monitors in a multi-screen configuration?

  Personally, I have a dual monitor situation, and sometimes I would watch television on an all always doing work on the other. If I maximize the Media Center window it will display full-screen on one monitor but it disables all features on the other. The only way for everyone is stretching as it can on the monitor/display without infringing the workspace of the other monitor, but it is ineffective because it does not display the full screen to a native resolution.

  If there is not a current solution for this, then it must be addressed by the engineers of Windows like watch TV on the computer, and multi-monitor configurations are becoming increasingly important in the houses.
  I appreciate the help. Thank you!
  Another Windows user

  After you start your support, press alt + tab to exit the Media Center window. Media Center will stay full screen play the media, and you can use the main screen as usual.

  This works better if Media Center is on the second screen without the taskbar.

• Deactivation of gestures on Windows 8, resizing specifically Multi screen with 2 fingers

  Is there a way to disable a gesture several advanced in Windows 8?   Specifically, I'm trying to disable or reduce the sensitivity of the screen resizing gesture.  My son has small hands, and even when it is just by pointing the touchscreen picks up his other fingers like a multi-gesture and the size of screen shots in all directions.

  He likes using ABCMouse.Com and Windows 8 with touch brings a new level of interaction of this educational site, but its basically useless resizing issue.

  Thanks for the tips.

  Try going to control panel > mouse > device settings > settings.

  Simply, it worked for me. Hope this helps you

• Two-processor Multi Core processing Parrell Question

  Normal 0 false false false MicrosoftInternetExplorer4 / * Style Definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-parent:" ";" mso-padding-alt: 0 cm 0 cm 5.4pt 5.4pt; mso-para-margin: 0 cm; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman"; mso-ansi-language: #0400; mso-fareast-language: #0400; mso-bidi-language: #0400 ;} "}

  Hey guys

  I'm looking for a little clarification on an issue with parrell treatment in LabView. If I have a dual processor with two 4 core CPU computer will be able to access all 8 cores in the LabView environment. I presume he can use carrots that can see the operating system?

  Thanks for the help,

  Tom

  Norbert B has written:

  It is the work of the operating system that applications may use all of the hearts, if necessary. So for the application itself, it should make no difference if the system (hardware) is MultiCPU, multicore, or even simply Hyperthreaded...

  Norbert

  It's true, but I would like to add my 5 cents here.

  Lets say, if you have a simple loop like

  While (true) {}

  do something

  }

  then OS will get a chance to run in multiple threads. So you get max 12.5% CPU load to 8 core PC or 50% max on dual core PC.

  I have dual core PC now and allows to check:

  

  Thus, as we can see - 50% CPU load reached (a single core charge more, but its a different story).

  Well, if we are going to use two while loops, then we will get 100% load:

  

  Of course, if you need to load all 8 cores, you should have 8 parallel loops.

  Compare BD above with the following:

  

  We have two functions of minmax table and they independently, but we have only 50%.

  Well, you can get also the 100% CPU utulization inside while loop. In th example below, you have two sub - VI, who called in the same loop:

  

  Here we have 100%. Important, these screws must be reenterant!

  See what happened if they reeenterant not:

  

  Now a little about the Vision. Most of the SubVIs Vision behind are DLL calls. Some features of Vision already optimized for the multicore performance. For example, the convolution:

  

  On the comic above, we have a simple loop with a Subvi, but two cores are used (convolute itself already optimized for the core multi car).

  Remember, not all functions of Vision optimized yet. For example, low-pass still single-threaded (compare this BD BD above):

  

  Of course, we can use multi hearts - just perform a parallel execution (you must split the image for both parties, and then to unite and so on):

  

  Remember, SubVIs must be reeentrant, and all calls DLL must be thred safe (not in the UI thread). Also good idea to stop debugging in such experiences to eliminate the additional CPU load.

  Another point on 8 cores. As far as I know, LabVIEW (and application on LabVIEW) will support only 4 cores within a default delivery system (at least before LabVIEW 2009). If you have need for all 8 cores, then you must add a few lines in LabVIEW.ini. See the thread next where you can find more details:

  Interpolate 1 d slow on computer 8 hearts

  Hope that everything written above was correct.

  Thanks for reading and best regards.

  Andrey.

• Netflix screen heart-wrenching questions in WMC

  I'm having a problem which seems to be fairly common, but I couldn't find anything in terms of support. Googling found me only similar complaints, but no solutions.

  While Netflix streaming through the Windows Media Center plugin, I experience screen tearing - lines that Flash on the screen - including then panoramic photos or photos with flashing light or too. Adjust the refresh rate and resolution have not solved the problem, and connection speed is not the issue.

  Netflix streaming via a browser does not lead on heartbreaking display. Most people blame Netflix itself or Silverlight (because, apparently, screen tearing wasn't a problem until that Netflix spent in Silverlight), but the version of the browser using Silverlight so it's not correct: he must have something to do with the WMC plugin specifically. I continue to look in the browser, but then I don't get the advantage of using my remote computer or the convenience of WMC.

  Thanks for any help!

  Windows Vista 32 bit (updated)

  Dell XPS M1530

  nVidia Geforce 8600 M GT graphics card

  Intel Core 2 Duo @ 2.40 GHz

  4.00 GB Ram

  I found the answer! Silverlight 5 Directors Edition solves all problems tearing even on my 720 p 55 "screen. Full silverlight 5 won't be released until later next year, but luckily I found this.

  Just install the exe file and voila! (Please share with as many people as you can)

  Get it here-online https://skydrive.live.com/redir.aspx?cid=fa13de10d3a67ee9&resid=FA13DE10D3A67EE9! 120 & authkey = Ob9371C4Kl4% 24
  Enjoy!

• To every time at startup blue screen + graphics card question

  Hello

  Since this is my first time that I post something here, I'll get to point. Since I got a new called graphics card: ATI Radeon HD 4350 1 GB

  My system:

  Compaq Presario SR5110NX

  OS: Win Vista 32 bit

  Hard drive: 120 GB

  RAM: 2 GB

  video card driver version: 8.791.0.0

  CPU: AMD Athlon 64 X 2 Dual Core 5600 processor +.

  I had nothing other than errors, blue screens (especially this: IRQL_not_less_or_equal... error message) and driver issues with this video card, although the last updated driver is installed successfully, I stil think that the error message that I receive on a blue screen: IRQL_not_less_or_equal

  I cleaned over and over again my registry with RegGenie. so I'm sure that my registry has not caused this, I need a solution to this problem at the end but it's a bit weird to have a driver installed corectly give a blue screen 2 minutes after the start. Any ideas here? any help will be appreciated.

  In addition, this could be due to the video card overheating? He completely 2 heat sinks, I should install a fan on it?

  Hello

  now I know what was causing the error, was not the graphics card, because since 2 days I did not get blue screens or mistakes, but it is a Realtek audio driver which was defective, so now, I have no day and no mistake.

• (Redirected) Multi-screen installation program

  I have a Latitude E5570 with a 2.6 GHz i5-6440-HQ and a graphic chipset integrated Intel HD 530. I run this wacky an E-Port Plus K09A.

  My question is, is this sufficient configuration to run 2 4 k (via DisplayPort) monitors for your daily tasks? Not heavy games or whatever it is, just basic business functions some possible streaming from a 4 k camera (which is handled by the processor not the GPU).

  Best of this post in the portable computer Forum here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Video upgrade - business multi-screen on Optiplex 755 MT

  People,

  Please, let me share my upgrade of success a good end of the Dell Optiplex 755 MT for multi-monitor lease.

  If you are looking to use a great system for companies, but want to add multiple monitors (which is fantastic for productivity), so this solution might be nice for you.  And do graphics multi-monitor solution that works is easy and difficult at the same time!   It's easy if all the material is known to work together!  This note is therefore, on this topic.

  * With the help of ATI over-pants 2450 in 16th housing PCI Express.

  * Four monitors (via VGA or DVI adapters included) OVER the motherboard video still works!

  * Updated the BIOS to the most recent.

  * Note that this card works PCI 2.0, and it works in what is apparently a PCIe 1 location. on the MOBO 755 0 a.  A 2.1 card may not work.

  * This is for businesses and all five monitors work fine now, even with YouTube.  This is not intended as a game environment.

  * There are a few things to try in BIOS in terms of parameters - for a while, there was a mistake of memory and the thing wouldn't start - it took a little time to understand the exact configuration of he.

  * WIndows 7 is the operating system used - and Windows Aero works.

  * I'm not long seen accidents associated with old Jaton NVidia PCI cards that we used previously.

  * The physical slot size are fine.

  * Consumption looks very good.

  * Cost of ITX Canada was about $250 more shipping, tax etc.

  * Here's the Sapphire version of the AMD ATI card, which is very good.

  * The AMD reference number is 100-505531.

  Five monitors are not identical (three different geometries and two sellers)

  * Device Manager lists the latest AMD video drivers for this card as installed and work - I am not quite clear if the drivers have been installed from the download, or later.

  Actual installation was required for their persistence and a little hairy.  When I reboot, I'll see all noting the exact BIOS settings.

  * The system crashed not once now, in a week of constant availability, including browsers open 20 tablets or more periods and use of the physical memory of 80%.

  * System 6 GB of RAM, running 64-bit and BIOS A22.

  Good luck.

  AMD 100-505531 over-pants 2450

  http://www.Newegg.com/product/product.aspx?item=N82E16814195083

  It comes with 2 connectors DUAL DMS.

  

• Update of the screen below Newbie Question

  Hello friends and family,.

  I have a screen that displays a list of contacts with one button simple add to create a new contact. When the user clicks the Add button, and a user enters all required fields their infromation is sent to a Web server and stored. The screen is out and you are returned to the list of contacts screen. The problem is that the list is not updated with the last added contact.

  Where I should be referring to invalidate to get the contact list screen painted?

  May I suggest two perhaps simpler solutions.

  (1) onExposed()

  You don't need to update your screen until control is returned to it.  In this case, the treatment will call your onExposed() method.  When is invoked, you can check something to see if you need to update your user interface and if so, to rebuild.

  onExposed() is quite often called, so you need them to make sure that you update only if you need to filter.  For example, if you go into a detail in "view" mode screen, you do not, but if you go into edit mode, then the displayed data can be updated, so you may need to refresh your screen.

  (2) pushModal

  I do not use it because it uses one of the number of Threads each application has, but if you use pushModal, so you know when control is returned to you will have to update your user interface.

  Just a thought.  Could be useful...

• Multi screen vs Single Manager

  Hi all

  What is the best way to create a like LinkedIn, Twitter with the top tool bar applications. Is it better to have a screen a lot, to push and pop whenever you click the toolbar button? or one screen with the toolbar and field Manager come and go each time that the toolbar button that is clicked? Thanks to the answer?

  I think that it is best to apply the old adage ' divider and conquer. " You can create a Parent when you have the toolbar, the hedaer and footer and the screen then drift to that show the appropriate content...

  HTH