Fusion 2 and unorthodox multi-screen configurations

Similar Questions

• Is it possible to do full screen Windows Media Center (native) on a monitor while being able to use the other monitors in a multi-screen configuration?

  Personally, I have a dual monitor situation, and sometimes I would watch television on an all always doing work on the other. If I maximize the Media Center window it will display full-screen on one monitor but it disables all features on the other. The only way for everyone is stretching as it can on the monitor/display without infringing the workspace of the other monitor, but it is ineffective because it does not display the full screen to a native resolution.

  If there is not a current solution for this, then it must be addressed by the engineers of Windows like watch TV on the computer, and multi-monitor configurations are becoming increasingly important in the houses.
  I appreciate the help. Thank you!
  Another Windows user

  After you start your support, press alt + tab to exit the Media Center window. Media Center will stay full screen play the media, and you can use the main screen as usual.

  This works better if Media Center is on the second screen without the taskbar.

• Full-screen Fusion VM and Mountain Lion

  After the update to Lion mountains (running Fusion 4.1.3), I was unable to run my Windows 7 VM in full screen mode and use the two forms.

  What seems to happen is that Fusion moves to the main screen to a second space, but the background on the secondary display is the canvas on the second screen.

  I uninstalled and reinstalled VMware tools and tried sharing my primary/secondary displays on Mac OS.

  If I look into the mission control, the secondary display is placed on 1 desktop instead of space that creates the merger.

  

  We are aware of a problem with Mountain Lion full-screen windows on the wrong space and are working on a solution.

• No multi-screen HTML5 option is displayed in the presentation of single Source after the upgrade of RH9 project

  I opened my RH10 project and updated. Now when it opens, there is no other choice for Multiscreen HTML5 in the project settings or control panel available to Source monkey. The project has been generated/unreleased using WebHelp, but the idea was to be able to move in multi-monitor configurations. Any suggestions?

  Answered my own question. I went project Set-up/screen layouts, right click, chose the new provision of the screen and all added one by one. Then single Source layouts, right-click, new layout and choose Multiscreen HTML5 in the output Type.

  Not as easy to convert as I would have thought/expected so I'm leaving this here to help someone else.

• When I try to "save under" I get a message "Initalising the root folders to display" and then the screen freezes

  When I try to "save under" I get a message "Initalising the root folders to display" and then the screen freezes. Sometimes when I click several times on the target folder it opens other times it does not. Any thoughts?

  Hello

  You try to save files using Microsoft office?

  If so, this article should help you

  The program stops responding when you try to open or to save a file in an Office 2002 program, in an Office 2003 program, in a 2007 Office program or in a program Office 2010

  http://support.Microsoft.com/kb/313937

  If its with a different program and then check if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.

  Step a. refer to the article below for the procedure safe mode in Windows XP

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step b. You need to perform a clean boot to find the program that is causing and then disable or remove.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353/en-us

  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

  my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

  Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

  If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

• my laptop is insafe mode and now my screen is huge and I have no sound while it is in this mode... How do you turn off safe mode

  original title: safe mode

  my laptop is insafe mode and now my screen is huge, and I have no sound while it is in this mode... How do you turn off safe mode?

  Hello

  audio drivers are not loaded in Mode safe

  read this to get out of Safe Mode:

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard - follow UAC prompt.
  4. The System Configuration utility opens
  5. Make sure the Normal startup is selected
  6. then click on the STARTUP tab at the top
  7. Make sure that the startup is disabled
  8. Apply - OK - then follow restart guests

• To work with a SAN and vMotion virtual servers configuration

  Hi all:

  I apologize in advance if this discussion is too much like another.

  I intend to use the following configuration (not yet deployed) and would appreciate your comments and input:

  2 physical host servers running VMware ESXi

  1 SAN Fiber Channel

  high availability and vMotion

  I just have a few questions:

  (1) then I keep all the VHD on the SAN files?  (I intend to have VHD files separate OS disk and DATA drive for each virtual computer).

  (2) is it recommended that I have all the hard drives the on host computers physical (to run virtual machines or anything else like swap files)?

  (3) how much space I have on the SAN?  I guess too much for the readers of the OS and DATA readers of all virtual machines... it's any additional space recommended for anything?

  (4) everyone would be able to direct me towards guides describing how to set up?

  Sincerely,

  Kahn

  (1) then I keep all the VHD on the SAN files?  (I intend to have VHD files separate OS disk and DATA drive for each virtual computer).

  Yes you can, and just a tip, on VMware world the virtual disk is called VMDK :-)

  (2) is it recommended that I have all the hard drives the on host computers physical (to run virtual machines or anything else like swap files)?

  You can use the same physical host computers without the hard drive, because you can boot from SAN, or use features such as automatic deployment, but it is the facility for the virtual machine, my recommendation is to use disks (volumes) of your San and share this volumes between your hosts to be able to configure High Availability (HA). Without shared storage, you can not HA.

  (3) how much space I have on the SAN?  I guess too much for the readers of the OS and DATA readers of all virtual machines... it's any additional space recommended for anything?

  Space on SAN depends on the size of your virtual machines and little extra space to make room for Exchange and snapshot files.

  (4) everyone would be able to direct me towards guides describing how to set up?

  The documentation will have everything you need: VSphere 6.0 Documentation Center , but if you want some guide step by step and with video/screen, see this one: BackToBasics | Mike Landry...

• VMX file is corrupted after installing Fusion 6 and Windows 7

  Please could someone help? I did the installation tonight of Fusion 6 and Windows 7 on a Mac with the Mavericks. Everything was fine until I stopped melting earlier. I went back to try to connect to windows, and I get corrupted file VMX. I looked in the Knowledge Base, and I tried the suggestions I could find, but now I'm afraid, I could really do more harm then good. Please any help would be appreciated.

  Have you tried to change the screen resolution in Windows?

  Or try activating / disabling the display settings in the Virtual Machine settings, uncheck 'Use the full resolution for the Retina display' and 'automatically adjust the size of user interface in Windows. Restart Windows, and then recheck the settings.

• Support multi-screen in mode 4

  I was under the impression that view 4 was going to be true instead of the multi-monitor support rdp version and using splitview.  We were waiting for version 4 so we could ride on all desktop computers, and I still don't.  In fact, when I choose multi-monitor it won't cover even two monitos now.  Someone at - it ideas?

  In this capture customer screen display is running in windowed mode and it would not use or adapt to mutimonitor as the application window is treated as a solid glass.

  In the capture of the attached screen shots you will notice I have spin a session which begins in multi-screen, changes of are displayed and finally back to multiscreen as follows.

  Start view customer / login / multimonitor desktop selection / select / select Connect (PCoIP is my default)

  See screen-one shot

  I can take this mode session window as yours, by selecting exit full screen in the bar of the shadow. As you can see, the View Client is running in windowed mode and adjusted the desktop virtual to fit the window and tilted in single display mode resolution.

  See screen-two screenshot

  I also took a third page where I manually expanded the Client of the view window on the two screens of my client. As you can see, even when he has automatically adjusted for virtual the desktop resolution to match the new size of the window.

  See screenshot screen-three

  This is the expected behavior in this multi-screen intervenes only when you start a session in multi-screen mode. It does not knock when you are in windowed mode. Looking for multimonitor when running in windowed mode?

  Affects your screenshot, it appears that the resolution has not been reset or adjust which is an indication that the multimon parameters have not always taken. The virtual machine must be powered down at least once after the changes. Did you turn off the power or reset / reboot? A reset/reboot will not work.

  WP

• Old lock to activate ipad asking for Apple ID and password used to configure icloud, which is forgotten. Help?

  My older ipad bouchoirs activation requires Apple ID and password used to configure icloud. I think I know the ID because she tips ***@outlook.com, but not the old password. Help?

  Try https://iforgot.apple.com

  or

  Contact Apple for the Apple ID account security support

  https://support.Apple.com/en-us/HT204169

• Inject an apple ID and PW using the Configurator 2?

  Hi all

  Wondering if a id apple & PW can be added to a profile and deployment using the Configurator 2. Sorry if this has been covered, am new to this and learning and discovery I.

  see you soon,

  Kristian.

  Hello, Kristian,.

  AC2 negates the need to have a configuration of account iTunes\AppleID on each device, can I ask why you wanted to do this, there may be a better way? ipads how are you trying to install? ipad users can add their own iTunes account to download other additional applications then deployed via the configurator.

  Kind regards

  Rick

• Hi, I bought a new Apple MacBook Air yesterday of FNAC in Geneva, and when I got it home I couldn't go beyond the black bar. In the end, I got a white circle with a slash and a black screen. Please tell us what to do. Thank you.

  Hi, I bought a new Apple MacBook Air yesterday of FNAC in Geneva, and when I got it home I couldn't go beyond the black bar. In the end, I got a white circle with a slash and a black screen. Please tell us what to do. Thank you.

  Bring her back. It's new, it's at the shop for sorting or replace it, not you to try to fix it.

• IPhone flattened my mother fell and broke her screen and I bought a new Yvonne, but I want to know the iPhone ID forget him, I can send the IMEI or help me so that I change the iPhone to my mother and I thank you

  IPhone flattened my mother fell and broke her screen and I bought her a new iPhone, but I want to know the iPhone ID forget him, I can send the IMEI or help me so that I change the iPhone to my mother and I thank you

  Yvonne > > iphone

  Sorry

• I use google chrome and lately my screen started flashing intermittently then on the internet.  Any suggestions?

  I use google chrome and lately, my screen begins to blink intermittently during the use of the internet. It flashes maybe several times in a minute... I uninstalled chrome and reinstalled... no change. This just started about a month ago.  Suggestions?

  Chrome support