Support multi-screen in mode 4

Similar Questions

• Why my computer will not go into screen saver mode, the settings are defined in law?

  Hello, I just rebuilt my computer. I run windows 7. I can't get my pc to go to screen saver mode. I run a Gforce 7800 graphics card, also

  I can't get my system to go in sleep and Hibernate, unless I do it manually. I checked all the settings and everything seemed ok.

  My drivers are all up to date. My email addy is * address email is removed from the privacy *.

  Thanks for your help,

  RSPRING

  Hello

  1 did you change on your computer?

  2. what happens when you try to change the screen saver?

  Method 1:

  Open the troubleshooter of power

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  I suggest you to follow the steps and check.

  1.	Open settings screen saver by clicking on the Start button, clicking Control Panel, appearanceand personalization, customization, then screensaver.
  2.	Under screen saver, in the drop-down list, click the screen saver you want to use.
  3.	Click Preview to see what your chosen screen saver will look like.
  4.	Click OK.

  The screen goes black when the monitor is set to mode 'Sleep' through the Power Options.
  Here is a link to some information about your Power Options settings:

  http://windowshelp.Microsoft.com/Windows/en-us/help/495c2226-19F1-49EB-9FD8-6dd7f2c0b49e1033.mspx
  Method 2

  I suggest you follow the links and check out them.

  Sleep and extended: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Turn off a computer: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-a-computer-frequently-asked-questions

  Windows 7 is not going to sleep

  http://support.Microsoft.com/kb/976877

• Fusion 2 and unorthodox multi-screen configurations

  General information

  -

  ---

  In Fusion 1.x, I've managed to work around the limitation of single display using a USB video adapter connected to the virtual machine. Worked surprisingly well and after seeing some performance issues with version 2.0, I decided to stay with 1.1.3 for awhile.

  Today, I upgraded to 2.0.2 and I am happy to say that performance problems have disappeared. I have therefore been primed and ready to try the double support native monitor.

  I used successfully screen of the MacBook Pro and a monitor connected to the DVI port. Very good, I like.

  But I also have a second LCD monitor hooked up to the USB adapter, and it's wherever I meet trouble.

  A momentary digression

  -

  ---

  With the card attached to the Mac USB, the setting "Use all displays full-screen" simply does not work, and due to the limitations of the Mac DisplayLink drivers, the virtual machine is too slow on the USB Monitor anyway. So relying on the Mac for lead all three screens is a non-runner - but I was ready for it.  :|

  The problem at hand

  -

  ---

  This has left me speechless, it's that I can't return to my former arrangement. When I reinstall the USB adapter to the virtual computer and extend the Windows desktop (I'm even not attempt to use "Use all displays full screen," because I know it will be too weird for words), I find that I can't move my mouse on the secondary monitor. All sides of the main screen are impenetrable, with or without svga.noHWCursor = 'TRUE '.

  Curiously, I can send windows to the other screen using certain features of UltraMon, if it is available for Windows. But I'm limited to interact with it using the keyboard. I guess there are some collisions here between Windows Media Monitor and Fusion, and my poor mouse is to take the shot.

  Short of attaching a mouse directly to the virtual machine (yuck), is there a way around this? Is there a VMX parameter which would disable the feature in Fusion 2 multi-screen display, or what I need to get off the virtual machine or back to the 1.x version of VMware tools?

  It would be a shame - otherwise I like 2.0.2.

  I don't think that there is a setting to revert to the behavior of 1.x, display management is not something that you can easily swap. I think you're right about the gap between what Fusion think is the usable area and what the customer thinks is usable as the cause of the observed behavior.

• Why not sharp images in screen adjustment mode?

  My images seem not to be specific in CS6 when I screen adjustment mode but they are when I zoom on them. Why is this and is at - it a way to solve this problem? It's a little boring.

  Hello, according to this page: http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html the A99 is only supported in the latest version of Camera Raw.

  You must convert the raw files to DNG using the 7.2 free DNG Converter:

  Winner: http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows

  Mac: http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh

• screen scrambled mode "all my files.

  screen scrambled mode "all my files.

  You have Google installed Player?

  Finder-fix problem of Google Drive

  Would you do a screen shot that people can see what you see? Make sure that you cover all personal information using the preview. The screen shot in a response using the camera icon or you can drag the screen shot in a response. Copy / paste does not work.

  Screenshots

• One or more devices do not support multi-equipment tasks.

  Hello

  I work with 2 X USB series Renault (6356 USB).  I am acquiring data analog voltage of all 8 channels on the two Renault (total up to 16 analog inputs).  I need data acquisition to synchronize and trigger from an external digital source (a signal that I currently wired in A PFI0 of Dev).  I use a sampling frequency of 800 kHz and a 400 kS buffer size.

  I tried to use an express vi for two devices; two separate express vis for each device; and recently changed to DAQmx icons (as seen in the attachment).  Anyway, I get an error (error-201426: one or more devices do not support multi-equipment tasks.).  He referred then DevA and DevB as devices that do not support tasks.  I was under the impression that tasks multi-equipment agree with property X of the series.  I use NI-DAQmx 9.5.5.

  In the attached photo, I left most while loop.  The part of the diagram that I left out is just for viewing and recording of data, I've included parts, I felt it necessary to describe my problem.

  I would appreciate all the advice really.

  Thank you

  Leslie

  I think crossrulz is right. No worries, as they must be in separate tasks, your data is always synchronized as you want. You'll just have to do some things in the software, because not all the data will be returned in the same Bay of waveforms. What you can do is to create two tasks (one for each device), build an array of tasks, and when you do a reading, do it inside a loop for. concatenate the waveforms of each reading and you have a table of waveforms with all your data as if you read it in a single task. You also need to configure your second task to trigger the DevB/PFI0 and divide your trigger wire, he PFI0 wiring on each device.

• Windows 7 is extremely slow to return to the screen saver mode.

  I installed upgrading Windows 7 on my computer and everything is fine.  However, when the system is idle and past in mode screensaver (with or without a password), the return of the screen saver mode are extremely slow (just a white screen).  It is sometimes quick, sometimes it comes back in 3-4 minutes, but most of the time it takes a long time.

  The system is a low end, but more than enough to manage w7.  It consist of:
  Pentium dual core (2140)
  2 gig memory
  NVIDIA 7300GT 256M

  I tried to delete the zone alarm security suite, does not solve the problem
  thought it was the HP 2610 print software, removed and still happens.
  update the bios (MSI p4m900)

  can someone figure this.  Is there something that prevents him to return to the desktop.

  Note that, I try to reboot from the blank screen by pressing the windows, right arrow, return.  But I think also, it does not address key strokes.

  THX

  I found a way to fix it! I did this:

  1. Press win + r and run msconfig. Go to tools and brand to troubleshoot the computer, and then click Start.

  2. then go to system and security and press electricityballance (not sure of the name in English because I have a Norwegian version..).

  3. restart your computer.

  4. my screen saver was not afterwards, but I gave it to display photos and now it works perfectly!

  When I checked the general tab afterwards, it did not have the checkbox to use the... start (a last..) one has been verified and the second has a blue full mark.

• Is a UPC (Unified Port Controller) of the FI 6200 supports multi protocol port simultaneously?

  Hello a good person.

  Is a UPC (Unified Port Controller) of the FI 6200 supports multi protocol ports simultaneously?

  For example, the second UPC has 1/9-16. Configure the ports like these? 1/9-10 for the server ports, 1/11-12 for the uplink ports, 1/13-14 for FCoE Uplink ports, 1/15 and 16 for the Uplink FC ports and so on. I know that Cisco Documents describe a port can be configured as server port, FC, FCoE... I "don't not interesting in these gross comments."

  Thanks in advance.

  Paul

  In UCS unified configuration of ports is controlled by a scroll bar, as shown here.

  

  There is a fixed configuration for FI ports, then another to the expansion Module. FCoE and Ethernet ports are both type Ethernet from a unified point of view port, CF requires that you select the ports you want to be FC ports.

  All ports to the left of the slider bar will be Ethernet, which can also be configured for FCoE, and everything to the right will be CF.  So to answer your specific scenario above Yes. BUT with a caveat.

  If you have moved the cursor between port 14 and 15 then left would be Ethernet can be configured as a Server Port, Port Uplink or FCoE port and ports 15 and 16 could be configured as FC ports.  BUT the downside would be that ports 17-32 would also be FC ports and you couldn't get to the Ethernet ports later.  If the port configuration is adjacent to ports on fixed ports, as well as on the extension module.

  Best practice is to determine how many FC ports you need and configure each component accordingly.

  Here are some details on the guidelines for the unified configuration of Ports.

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/SW/GUI/config/Guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_0101.html#concept_0249934662D1439AA5E926A503AC8B4B

  Hope this helps,

  Steve McQuerry

  UCS - Technical Marketing

• How do I know if my computer supports multiple screens or not?

  How do I know if my computer supports multiple screens or not?

  Most of PC graphics cards can run two monitors.
  There should be settings in the control panel for the card - for ATI CCC
  and the Nvidia for Nvidia Control Panel.
  You can also check with the mfg of your PC or the mfg of your graphics card
  For more information related to your card or a particular machine.

  ATI and Nvidia have the ability to run on two monitors with recent models and pilots.

• Can't seem to find the screen blending mode

  Hey all!

  I am currently having a go at Illustrator (CS5), but he seems to lack the "screen" blend mode Or, more likely: I can't!

  To my disappointment, my version of Illustrator is in Dutch and I'm not able to acquire an English version , so that the names will be a little different. (I'm DEAD for an English languagepack! Bonus points for a link!).

  I watched it and it seems to 'screen' blending mode is called "anything" in the Dutch version (source: tml http://www.photoshop-tutorials.nl/Basis/Adobe-Photoshop-CS-vertalingen-Engels-Nederlands.h ). But there is no such blending mode in my Illustrator.

  I have (in order, it appears on my screen):

  Normal

  Darken

  Multiply

  Engraving color

  Lighten

  Pixelation (not sure)

  Color dodge

  Overflow (not sure)

  Soft light

  Hard light

  Difference

  Exclusion

  Hue

  Saturation

  Color

  Luminocity

  Screenshot: http://DL.dropbox.com/u/9652939/Illustrator%20help%20screen%20blending%20mode.PNG

  But no 'screen '! I tried all blending modes, and none of them gives the result, one would expect the screen blending mode. What I am doing wrong?

  Screen seems to be "Rasteren" If you compare the lists.

• Whats with Vista does not support full screen mode?

  I found that if a program or a game trys to run to (mode full screen) after a few minutes or seconds, Vista it minimizes or restores his window. This occurs in WMP11 and some other games, but not at my Win95 games, such as the 1999 edition of Nascar and my Viper Racing, because it opens, (referring to the 1999 edition of Nascar) I can see the reverse color window open and streach on the screen if you don't see the windows title bar and reduce restore, and close icons. I wonder if I can fix now or wait until Win7 comes out and update. I am running Windows Vista Home Premium, on my 3 month old Acer Aspire 4736Z.

  Well, I didn't do anything that you said, and over time he worked on it self. Maybe it was an upadte or something because I do not change a thing.

• Windows 7 blue screen, sleep mode monitor.

  Hello, I have a hp series p6000 desktop product # BT503AA #ABA. And I get a blue screen crash dump and keep saying my monitor goes into sleep mode. Help, please. I swiched monitors and the same results. computer is used for family only, no company. It is running do not install windows 64-bit and some windows updates.

  Really sounds like a software problem, but could be a hard drive problem.

  Boot tapping F10 select your hard drive, then SMART support, run a short self-test. If it goes, try to run a last good known Configuration.

  Start type F8 and select last good Configuration know. This will automatically return the system for when it was working properly.

  Let me know the result to your convience earlier.

• Windows XP hangs at the splash screen, safe mode does not work either

  I've updated my laptop with a windows update and when I went to restart, it crashes just in the start screen.  I tried in safe mode hanging at MUP. SYS and I tried the last known configuration.  So far these options do not work.  I tried Memtest, HDAT2, Ultimate Boot CD tests, chkdsk/p and chkdsk/r, Windows XP, CD recovery and rebuild, tried to start up with each opening of USB port and even tried formatting and installing Windows XP Pro SP2 and Windows XP Home Edition SP1.  So far I have always in step 1, where nothing has solved nothing.

  I noticed that there is a thread here where a person has had the same problem and he said that it has updated its BIOS.  For hours, now I did research on how update my BIOS by creating a bootable disc...  I'm thumbs on a mile it looks. Here is a link to the thread with the person who had the same problem. http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/2b3f344c-F923-4D84-868d-c0be603e601b

  I've been on the forums of Toms Hardware for more than a week with a little support, but so far, nothing has worked. http://www.TomsHardware.com/Forum/253683-45-wont-load-hangs-splash-screen#t916360

  I could use any help we can on it.  It would be deeply appreciated!  My email is * address email is removed from the privacy *.

  Well I tried to Win 7 on a bootable disc.  I followed a bunch of instructions I found on youtube.com, but for some reason that I could not burn to disc.  Kept getting an error even if I followed every perfect step.

  In any case, I watched my CMOS on compensation, but the battery is soldered on.  I just messed with it a little bit to see if it was lost or anything thing but I didn't rip out and one other solder on because I have never done this before.  So I put everything back together, turned on my laptop and it finally starts up the Windows installation screen.  FINALLY!  Thanks for everyone's help and patience.  I guess the battery has lost... but not quite sure.  I left the laptop off for about 4-5 days before I tried to play with the CMOS this morning.

  Daavee, thanks for your help on this.  I learned all troubleshooting and making the ISO.  Have a good Christmas!

• Black screen safe mode works fine

  Hi all

  I had trouble with my Toshiba Satellite L305D for a few days now.  Services began randomly closing for example, processes Search host index.  So today I had to restart from the beginning, everything closes 1 by 1.  Now, when I start in normal mode, I get the black screen.  All right is safe mode.  I did a scan of the prompt on the review from a user on another thread, but have no idea how read the results, which contained several questions that cannot be repaired.  I have included 2 article with the expressions "cannot fix.  I would appreciate help from someone who knows how to analyze this mess.  If anyone has any other suggestions, I'm open.  I can't afford to service so I have to find a way to solve this problem on my own.  Thank you!!

  POQ 70 ends.
  2011-11-04 13:43:43, Info CSI 0000016e [SR] full Verify
  2011-11-04 13:43:44, CSI 0000016f [SR] components Info check 100 (0 x 00000064)
  2011-11-04 13:43:44, transaction Info CSI 00000170 [SR] beginning verify and repair
  2011-11-04 13:43:53, info CSI 00000171 Member \SystemRoot\WinSxS\x86_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini file hashes are not actual file [l:24 {12}] "settings.ini": "
  Found: {l:32 b:ntPb8a3owMmbzl2TXFHogrOTUqnXgzASIdBVmJptaGE =} expected: {l:32 = b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o}
  2011-11-04 13:43:53, info CSI 00000172 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2011-11-04 13:43:54, info CSI 00000173 Member \SystemRoot\WinSxS\x86_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini file hashes are not actual file [l:24 {12}] "settings.ini": "
  Found: {l:32 b:ntPb8a3owMmbzl2TXFHogrOTUqnXgzASIdBVmJptaGE =} expected: {l:32 = b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o}
  2011-11-04 13:43:54, info CSI 00000174 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2011-11-04 13:43:54, info CSI 00000175 [SR] this element is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "
  2011-11-04 13:43:57, Info CSI 00000176 repair results created:

  POQ 90 ends.
  2011-11-04 13:46:39, CSI Info 000001 d 0 [SR] check all the
  2011-11-04 13:46:39, CSI Info 000001 d 1 [SR] repair of components 1
  2011-11-04 13:46:39, CSI Info 000001 d 2 [SR] beginning operation check and repair
  2011-11-04 13:46:39, CSI Info 000001 d 3 hashes of file Member \SystemRoot\WinSxS\x86_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini is not actual file [l:24 {12}] "settings.ini": "
  Found: {l:32 b:ntPb8a3owMmbzl2TXFHogrOTUqnXgzASIdBVmJptaGE =} expected: {l:32 = b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o}
  2011-11-04 13:46:39, CSI Info 000001 d 4 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2011-11-04 13:46:39, CSI Info 000001 d 5 hashes of file Member \SystemRoot\WinSxS\x86_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini is not actual file [l:24 {12}] "settings.ini": "
  Found: {l:32 b:ntPb8a3owMmbzl2TXFHogrOTUqnXgzASIdBVmJptaGE =} expected: {l:32 = b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o}
  2011-11-04 13:46:39, CSI Info 000001 d 6 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2011-11-04 13:46:39, CSI Info 000001 d 7 [SR] this element is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "
  2011-11-04 13:46:39, repair results 000001 d 8 CSI Info created:

  Hello

  These are mistakes in the sidebar - settings.ini and are not the cause of the black screen problem.

  As this article States the question may be totally ignored.

  The SFC.exe command reports Settings.ini file errors in the CBS.log file after you add gadgets to the
  Windows Vista Sidebar by using the Sysprep tool and an Autounattend.xml file.
  http://support.Microsoft.com/kb/947595

  -----------------------------------------------------------------------------------------------------------------------------

  These errors only are in the settings.ini for the sidebar and are not a serious problem by all means.

  Close the sidebar for that.

  Is there the thing for the settings.ini - run AutoRuns and look at the SideBar Gadget entries - all
  This point is no longer existing files such as temp or uninstalled gadgets or not running? Generally
  those who have "Yellow icons" on the left side and the files/folders will not exist. If so right click on them
  and delete - restart. This may correct the errors that you see.

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  -------------------------------

  Another process to try is to remove everything except a gadget - everything what you think is the most simple, that you use.
  Maybe the calendar. Then RESTART - use another simple gadget, and delete the first class used
  -RESTART again. See if that helps.

  Rarely, the error causing the problem with the sidebar and not not affect the system in general.

  The SFC.exe command reports Settings.ini file errors in the CBS.log file after that you add gadgets to
  the Sidebar of Windows Vista by using the Sysprep tool and an Autounattend.xml file.
  http://support.Microsoft.com/kb/947595

  -------------------------------

  Another method to try with the SideBar does not is to copy the Settings.ini to another folder, then
  Delete it - and then start sidebar.

  --------------------------------

  You can also try to restore any copy of a Vista DVD (even 32 or 64 bit however).

  Access files on your Vista installation DVD
  http://www.Vistax64.com/tutorials/86959-access-Vista-install-DVD-files.html

  How to extract system files missing from the DVD of Windows 7/Vista.
  http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

  ==================================================
  ==================================================

  For the BlackScreen:

  With the help of Toshiba, their books online, check the drivers, diagnostics and ask in their forums
  for problems known.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  Is the black of the screen the BIOS (Setup/settings) - or if Windows loading - does show the cursor?

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files. You can also
  Safe mode allows to save data.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How do you get support full screen cmd?

  Hey all!

  I wonder, is there a workaround known for the apparent lack of support for full screen cmd Windows Vista?...

  Thank you!

  Hello Samir Gunic,

  Look at the article below:

  Article number: 926657 - Some 16 programs on the BACK and the command prompt does not work in mode full screen in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/926657
   
  You can also watch the thread below for options:
  http://social.technet.Microsoft.com/forums/en/w7itprovirt/thread/332d1feb-f18a-4185-8C21-9bbe2289645d
   
  I hope this helps.