Multiple connections to ESX
Hello
I'm creating an application web multi-threaded, the job of managing the work of automation running on an ESX Server. When 'jobs' was presented, the system manages execution of each task on a VMWare ESX server image. I use the wrapper "Vestris.VMWareLib" of dblock in c# to perform these actions.
However, I have some problems when I try to connect to ESX. If I try a number of connections to ESX (like when the 3 jobs carried out to run) at the same exact time in my application, I get the error:
Vestris.VMWareLib.VMWareException: The handle is not a valid object of VIX
I've then preceded to write a simple c# console application make 5 simultaneous connections to ESX, but had no problem with these. I have attached to this example.
I have some questions if I do a number of connections to ESX at the same time? What is an idea that I have to "shift" for connections by a couple of seconds?
Please help thank you!
I asked the same question several times on this forum (http://communities.vmware.com/thread/214215) and I'm not the only one. I tried other channels in VMWare and I have nothing but radio silence.
Update: this thread, http://communities.vmware.com/thread/205942?tstart=0, said he's going to be a release in a few weeks. I cross my fingers.
Tags: VMware
Similar Questions
-
is it possible that I can connect on 1 Web site under multiple connections determine?
I need to be able to be connected on 1 Web site under multiple connections for my work. I am currently using an older version of internet explore is no longer be supported and none of the more recent browsers allow me to do. Is there a way I can configure firefox to support this?
I tried to download this but is not available for version 26.0. Is it possible to restore my firefox or just wait until they update it?
You have 2 versions behind now - Firefox 28.0 is the latest version, with Firefox 29,0 due to be released in 6 days.
-
Multiple connections to Microsoft sites
I have multiple connections to microsoft sites on how to get online. I got (at the time) and I did not open my browser yet! I'd like to know why, and what function they serve. Thank you
192.88.99.1
207.46.75.254
65.55.37.62
64.4.59.173
213.199.161.77
65.55.53.156
newncsi.glbdns.Microsft.com
Hello1. what browser do you use to go online?
2. don't you make changes before the show?
3. where exactly do you see these connections?This can happen if you have set as the web browser home page www.microsoft.com . Whenever the browser is trying to connect to the Microsoft server, you will see a large number of established connections. But in the description of the problem, you mentioned that you see these connections when the web browser is not open. This leads to some confusion. We appreciate if you can provide us with more details on the issue, so that we can better help you.Kind regards
Syed
Answers from Microsoft supports the engineer. -
Slow performance when multiple connected clients, WSM 6.0 x 64
Slow performance when multiple connected clients, WSM 6.0 x 64
Hello
When users logs on, its quick and pleasant.
However, when many connects, it slows down everything.
The linked site server has basic 16 total, 24 GB of RAM, and 8 x 300 GB 10 k in RAID10 discs.
I see the server is loading rather low, he got 4 x 1 Gbit/s in the lacp to a switch of concert team, then all switches have 1gig uplink.
The server use never more than about 10 GB of RAM, this could be the problem and how to get the server to use more RAM?
Total cpu load stay about 1 to 2%, network, all about 1500Mbps picks
There is only one 25 GB os image file, and it slows down when all about 30-40 users open a session.
This affect MaxSystemCacheMBytes? If I for example 1% or 200 MB, might lower it being 'forced' to spend more RAM?
Screendump of x 64 connected site server
-
Multiple connection, but the connections are blocked port
Hello
If I want to have my windows 7 connected to two Internett different connections due to a block of some Web pages, and the other blocks all online games of (steam, origin, etc.)
So my question is can I do a responsible only for browser data connection and the other connection to make all data on the computer.
I saw this post on multiple connections. but I still need a connection can only be used for (chrome, firefox, ie, etc): http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/multiple-internet-connections-in-windows-7-nlb/ffd5cb00-7330-452c-8f72-bb05fef7dbc5
Also spesify the nettwork game log from time to time on a web browser, so the second connection cannot overide requires all web traffic or I won't be able to connect to the nettwork gaming. I have a script running at continualy connect on the web.
All responses are welcome!
Hello
To ensure that you get the best response to this concern, we suggest that you post this query on the forum Web site the Microsoft Technet THERE that this issue is best handled by their level of expertise and support. To do this, visit this link.
Best regards.
-
Hi all
Then MCAK manage multiple connections of AWS in the current version?
If this is not the case, if there is a plan made me know.
My customer wants to use several AWS regions (USA and Tokyo) because of the BCP/DR.
Thank you
Jun Kojima
Yes, multi-Cloud is designed to manage multiple connections in the same or multiple platforms. You can even have multiple connections to the same AWS region by using different accounts to facilitate the assignment of chargeback. You also have the option of specifying and area availability.
PS. a new version of the multi-Cloud kit will be available in late February with the offering of the CIAC Enterprise Edition 3.1.1 complete future scalability. For AWS, it will also support IP elastic, management and distribution of key pairs. The current MCAK for Starter Edition is recommended for the proof of concept only at this time.
-
VSphere Client multiple connections to a single server vCenter Server?
I have a vCenter Server that manages a few hosts. I know it's a bad habit to manage guests individually using vSphere Client, but I was wondering if I can have multiple connections to the same server vCenter Server vSphere client using the same Windows credentials?
It seems counterproductive to only allow a connection to the server vCenter Server...
Yes - by default, a connection up to 25 to vCenter
-
Hello
I moved 2 x a new vCenter 4.0 3.5 ESX hosts. I also have a new ESX 4.0 host.
Can I connect this ESX host 4.0 for the data store using the 2 x ESX 3.5 hosts? It is a VMFS 3.31 on a CX3-20 SAN data store. I was then going to vMotion virtual machines to the new host and reinstall the old.
I just fear that the new ESX 4.0 host will do something to the data store that make it incompatible with the older ESX 3.5 servers.
Thanks in advance,
Euan
Yes, you can connect and use these data with ESX versions warehouses. If you have sVMotion it will work as well. On ESX 3.5 you can only move the guest as a whole on an ESX 4.0 host, you can move the vDisks independently.
It is perhaps unnecessary, but when I update the ESX 3.5 servers 4.0 I unplug the storage until the update is running. Just in case...
AWo
VCP / vEXPERT 2009
-
Hi all
Please help solve my problem.
After that I changed the Duplex parameter on NIC's Service console, I am unable to connect the ESX host. How can I reset the 100 MB NETWORK card duplex. Can someone help me please.
Concerning
Vijay
Hello
As the bulb you have two problems that are not related.
(1) duplex setting, your switch and NIC must match. If one is assigned to auto-negotiation, then the other must be set to auto-negotiation. Personally, I tend to let auto-negotiation unless there is an absolute reason to spend. If you then turn on the both sides of the interface, the switch port and esxcfg-NICS allows you to change the duplex, etc.
(2) passwords for root are not related to the network unless you have also run esxcfg-auth authentication remote. The only time I saw what you have here is when the system is configured to try to authenticate remote and not locally.
The two problems are fixable by booting into single-user mode, set the duplex and reset the password.
Best regards
Edward L. Haletky
VMware communities user moderator
====
Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast -
Pools of multiple connections to the same physical Structure with SPR
I use OBIEE 10.1.3.4 and have multiple physical databases that contain the exact same structure. Instead of creating the same physical structure in the RPD file with their own pools of connections, I would like to have a physical structure with multiple connections pools. I have this Setup, however, I can only see the data of one of the physical databases by using the right click, view data... option in the physical appearance of the RPD file. I searched and could not find a solution to my particular problem. Can someone point me in the right direction?Goal is to get the CPs separated... and then, you can use two data. But better to have 2 separate objects.
-
Limiting errors while working with multiple connections
I am currently evaluating Developer SQL and I'm looking for most of the features that allow connections several clearly distinct to avoid DBA errors when working with multiple connections in parallel.
Currently, it seems that developer SQL provided these features:
-Organization of folders in Explorer-> for example, we can create a folder per environment (DEV,...).
-name of connection-> each user can define his own name. These aliases will appear in the tabs and the title of the main window when opening a connection.
These features ar fairly limited if you compare with a tool like Toad, which used to associate colors with connections (good feature!) or define custom fields. In addition the database user is not displayed in the SQL Developer interface, unless we add in the name of the connection...
Do you know if there are plans to improve these features in future releases of SQL Developer?
Or, otherwise, it would be possible to quickly develop a plugin that can provide? (especially on the colors of connections)
Thank you.Hello
I opened the application, and you can add your voice to this. This isn't a feature that we can control, nor is it something that you can expand as it should be expelled from the underlying IDE. We requested a change in the IDE so that we can implement this improvement.
Sue
-
When starting, I have 2 USB hubs that connect to multiple external HD.
If I disconnect the hubs, windows always starts very well.
If I connect the HUB, windows delayed considerably the boot (approximately 5 to 10 minutes) and sometimes restarts the PC before getting to the screen of windows login, and after that the Windows logo is displayed during the start-up phase.
Some HD sometimes take to start I hear but why Windows is restarted and all simply just do not excluding the HD or hubs does not not as expected?
Any clue?
Hello Patrick,.
If other devices are working well, then clearly the USB ports have gone very well. I would say more that likely you have two defective USB Hub (it happens, I have several other defective in my junk mail boxes!).
Given that the hubs are relatively expensive, I suggest you replace the two hubs with more heavy duty those able to withstand the high external HARD disk requirements. Try Newegg.com and TigerDirect.com, sort by best rating.
The other thing, you don't mention if your hubs / ports are ports USB 3.0 and if you use a card like the adapter link. These configurations can sometimes cause problems, and it might be useful to re - check the different connections.
Keep me posted.
And thanks a lot for this.
Kind regards
BearPup
-
ISE-guest user account multiple connections
Hello
How do ISE I only allow a connection to the guest both user account. the real problem I have is when I give a username invited to someone, it can circulate this userid with others and multiple unauthorized guests use this unique user id to connect to the portal comments
In any case restrict?
Limiting the guests at a Session active network
You can restrict the guests to have a single device connected to the network at a time. When clients try to connect with another device, the device is automatically disconnected from the network.
It is a global setting that affects all the portals comments.
Step 1 choose Administration > management Web portal > settings > comments > political portal.
Step 2 check the only guest session authorized by user option.
Step 3 click Save.
-
Look at a multiple connections ITA?
Hello
Can anyone confirm if it is possible to see ITA of multiple remote connections / sessions. E.g. it is possible to open the main console of ITA on several machines at the same time?
TIA.
-
Pools of multiple connections with different s the same database schema
Hello team,
I have a requirement where in a single multiple schema s database are here. A schema contains old data and another schema contains data of this year. I must get in the RPD.
A lot of tables in the schema, so before I start working I have a question, can we have several s schema with the pool of connections for each under a single database? If Yes, I would be grateful if someone can keep an image of him how he appears in the RPD. I use 11.1.1.6. Thanks in advance.
Thank you
SR
I have a requirement where in a single multiple schema s database are here. A schema contains old data and another schema contains data of this year. I must get in the RPD.
A lot of tables in the schema, so before I start working I have a question, can we have several s schema with the pool of connections for each under a single database? If Yes, I would be grateful if someone can keep an image of him how he appears in the RPD. I use 11.1.1.6. Thanks in advance.
Create a database user has access SELECT through patterns. Then, use a Pool of single login with this user id and check the box to fully qualify table names, so that when the SQL generated it precede patterns correctly. You can create patterns according to the needs, and it will work fine.
Maybe you are looking for
-
All traces of the mail is removed from the gmail account.
-
New firmware on Toshiba 55L7453DB
Had a software update, anyone know what are the new features in the update?
-
With the help of the command on paper by emission of GPIB Tektronix TDS540
-
Hi, I have problem with my keyboard which is very very slow. Each letter after typing a long press.
-
HelloI have a page template, containing panelStretchLayout with facets top and CenterTop of page height property panelStretchLayout is set to 50pxInside of the superior facet of PanelStretchLayout, I have a decorative box with only the Center facets