Multiple RAC databases on IM even using different subnets for Public i / face

Similar Questions

• Use different text for a cross-reference

  Hi all

  My user guide has several section title pages, detailing what users will find in the chapters of this particular section.

  I was invited to create a link of each chip in the page of the section in the chapter in question.

  I don't want to include the title of chapter in bullets in the page in the section.

  For example

  My first chapter is titled "Getting Started".

  Before this chapter, there is a "section file", that says something like

  "This section contains details of the following:

  • How to get started with product
  • Information in Chapter 2
  • information contained in the chapter 3 "

  I want users to be able to click on the text "How to get started with the product" and be taken directly at the beginning of Chapter 1.

  I don't want to chip in the page section to read "Getting started".

  Is there a way to do this?

  Thanks in advance

  Laura

  > FM tries to interpret any characters after slash ('-') and special symbols.

  Escape the backslash with a second-fix this?

  > You must use the ' / ' as the separator for folders instead.

  Basically, FM default rating Unix internally for the paths (obliques) even on Windows.

• Need help understanding create new network / different subnets for 2nd VM NIC

  I am newer to Vmware and not quite sure that the best way to accomplish the task.  I have a couple of hosts of ESX 4.0 update 1, each host has several physical network connected to the LAN interface cards and iSCSI, vCenter with about 10 mV and each VM has only a single virtual NETWORK adapter for LAN.

  I need to install a new virtual machine with a special application that must be double virtual NICed.  1 NETWORK card must be on the private LAN (e.g. 192.168.10.x) and NIC2 must have a public IP (e.g. 4.2.2.x).  I was going to give NIC2 a private address and NAT through our Cisco PIX firewall, but I am told that causes problems with the application and it must have a public IP address on NIC2.  I now host a card physical NETWORK connected to public physical switch outside the firewall (so I can give him a pub addess).

  I have a physical NETWORK card I booked for this on the Vmware host.  How can I create virtual switch separate from the local LAN, associated with the physical NIC to the virtual switch, assign a range of IP addresses that are associated to the public IP address works (if that's what I do)?  From there on, I think that we would give the real public IP to vNIC2 during the installation of the OS.

  Thanks for any help you can offer.

  Steve

  Welcome to the forums.

  You can add an additional vSwitch and assign the 2nd physical NIC as the uplink. All the networks is done through the vSphere client configuration tab. In the virtual machine settings just add an extra vNIC and connetct for the new vSwitch.

  You should have a look through the information on http://www.vmware.com/technical-resources/virtual-networking/

• How to maintain the different password for connection and PIA Appdesigner?

  Hi Experts,
  
  Can you help me how could maintain different passwords for the same user in the designer applications and PIA connection.
  
  According to my knowledge if the user exists in the psoprden table it could access Appdesigner and PIA. But how could give us differnty passwords for the same user while loggin to PIA and designer of the app?
  
  Thank you
  Yarli

  getyarli wrote:
  My friend had the same type of installation in its environment. And it is unclear how it was setup.

  He has been asked to use different password for connection Appdesigner and PIA, log in to the same user.

  Person working within a level LDAP (PIA) one directly to the database (AppDesigner)?

  Nicolas.

• RV180W ping hostname between VLAN & different subnets

  Hello

  I had a RV180w with 1.0.3.10 closes. According to the name of position, I'm not able to resolve host names between different VLANS which affected to different subnets, for example, allows said I have the following hosts:

  CASA:

  192.168.241.100/25 (wired - VLAN 1)

  Router: 192.168.241.1

  DNS: 192.168.241.1

  XBMC: 192.168.242.100/25 (Wi - FI - VLAN 2)

  Router: 192.168.242.1

  DNS: 192.168.242.1

  If I try to ping from two sources to one of the two destinations, the only one I get is a message 'impossible '.

  Authorized additional information routing between vlans & proxy DNS and if I try to look at the hostname under the 'nslookup' command, I could not resolve the host name, but if I do a "ping - a 192.168.241.100 ' it is said ' response from CASA (192.168.241.100) blah blah blah."

  So what I'm missing here?

  Hi Bruno, you can usually solve different subnet host name because the host does not know the subnet that treats it as a security measure.

  Disable the firewall feature on your computers and which must fix, otherwise you will probably have to change the lmhost files.

  -Tom
  Please mark replied messages useful

• Can I set a different password for my online account, by email and on the linked account PC.

  Hello

  I think that it is on the windows system's huge security breach 8.

  I have 3 PC and all of them use the same password (password of account).

  My email is also using the same password too.

  If I want to buy items in the store windows, I need to use the same password again.

  Therefore, I don't want to make purchases of the Windows application because it is not secure.

  It is because if your computer gets hacked or something, the hacker is able to get all your information of all accounts linked to your on-line account (e.g., facebook, e-mail) and all your live account Details payments. They can also delete your account if the computer is a reliable PC.

  I hope that Microsoft is able to allow people to use different password for different purposes.

  i.e.

  E-mail

  Windows Store purchases

  Each Windows PC

  Manage the Live account

  I like the concept for windows 8, but I think they still have room to improve. So, I hope to contribute.
  If windows 8 store is safe to use, the store will work very well in the future.

  Kind regards

  Simon

  Hi Simon,.

  Thanks for the post and comments about Microsoft Community.
   
  I look you would like to know if you can use a different password for your online accounts and emails and on the computers.
   
  I would suggest that you can use different password for the same account on different computers. You must use the same password to buy anything on Windows Store. Windows Store is a secure store you can go ahead and make purchases from there.
   
  See the link given here for assistance:
   
  Tips for creating the passwords and strong passwords
   
  http://Windows.Microsoft.com/en-us/Windows-8/create-strong-passwords-passphrases
   
  Protect your PC:
   
  http://Windows.Microsoft.com/en-us/Windows-8/privacy-on-public-networks#1TC=T1
   
  My Outlook.com account has been hacked:
   
  http://Windows.Microsoft.com/en-us/Windows/Outlook/hacked-account 
   
  Note: The link also applies to all Microsoft account.
   
  Feel free to write us if you have problems to Microsoft Windows.

• How to assign the different VTEP subnet for each grid of a group pool?

  The design guide NSX to use L3 access design, it is recommended to use the same number VLAN per rack, but with the other subnet

  10.66. < id rack >.0

  10.77. < id rack >.0

  10.88 < id rack >.0

  10.99 < id rack >.0

  If the client compute cluster spread on grids, then we will have a different subnet for each rack VTEP, something like (assuming that vlan 77 is for VTEP0

  < rack 1 > 10.77.1.1, 10.77.1.2, 10.77.1.3...

  < rack 2 > 10.77.2.1, 10.77.2.2, 10.77.2.3...

  During the preparation of the host, GUI invites you to assign VTEP for Pool DHCP/IP, looks like most of the cases we use Pool of IP, then for the compute cluster, how can assign us VTEP IP in a different subnet in a single group?

  Thank you

  Clarisse

  You have two options:

  (1) DHCP using support on every TOR address suggest you. This is the recommended approach

  (2) DHCP then changing manually the VMkernel interface IP address on each ESXi host to match the required subnet - this is not recommended because it is not automatic, but is still supported

• Setting up a virtual computer on a different subnet?

  How to set up this configuration is all new to me.
  Current context:
  Internal subnet: 192.168.1.x
  2 - 5.5 ESXi hosts. Each with 4 physical NETWORK adapters
  Configuration is attached.
  I have a physical server I want to virtualize but is in a different subnet.
  Replacing the subnet: 192.168.10.x.

  I reason assuming that I'll need to add a physical NETWORK card to each host and assign this NETWORK adapter on the computer virtual requiring a different subnet? Or am I way off?

  Thanks in advance!

  If your physical switches supports VLAN's then I would say you think to reconfigure the ports for the ESXi host and tag/trunk ports to the VLAN necessary. And create groups of ports VM with the differnet VLAN-ID on the ESXi host. In this way, you can use different subnets on the ESXi host without the need for having dedicated physical rising for each subnet.

  André

• Is it possible to use different names NIC 10 g RAC?

  For example, node 1 has ipge0 for ipge1 private, private and node 2A e1000g1 and default e1000g0 of Solaris? Or have names of interfaces correspond to all nodes? I don't speak of IP addresses or subnets - just the names of NIC.
  Here is some information.
  It's a 2 10g RAC on Solaris node that has been in operation for years. Node 2 has experienced corrupt root (OS, nothing to do with Oracle) partition, sort of operating system has been reinstalled. After reinstalling OS I copied /var/opt/oracle/*.* from node 1, changed to reflect the info node 2, more the CRS related files de/etc/init.d, such as init.crsd, etc. It is shared Oracle home, then Oracle continued to run on node 1 very well.
  However, after starting crs applications says "atlts04ra.atlts04.vip:ifconfig: status: SIOCGLIFFLAGS: ipge0: no interface. Indeed, this interface does not exist on node 2.
  So, is there a way to tell oracle to use names of different interfaces for nodes? Or vipca be asked to match the names of NIC as mounting drives names must match?
  I want to avoid a reinstallation of the CARS because that will disrupt the oracle database that worked on shared oracle home all along.
  Thank you.

  Hello

  Sorry if my explanation if not really clear, that I mentioned could be a bit tricky and additional needs work however there are more easy options to do

  -use dladm to rename the datalink-> your solaris admin should know
  -create symbolic aliases in / dev to interface

  Hope this helps

  See you soon

• How to use backups RMAN to restore a RAC database to single instance on another host?

  How to use backups Rman to restore a RAC database to single instance on another host?

  I tried to copy these inline for you:

  ------------

  Backups RMAN disk HowTo restore database RAC to single Instance on another node (Doc ID 415579.1)

  Down

• IF database-&gt; RAC database: estimate of the size of the SGA for each instance

  Hello!

  Let's say that there is a single instance with SGA 100 G size DB (assume this size is optimal for this database).

  If this database is intended to be converted to a RAC database with 2 instances (suppose DB workload will be spread over multiple instances).

  How to estimate the needs of SGA size for each instance in the RAC database?

  It takes 50G + General cool CARS (say 15%) for each instance?

  (Do not consider situation when one of the instances has failed, and all the charge redirects to an instance having survived)

  I'd be grateful if someone has offered or provided useful references.

  ---

  Kind regards

  Kyrylo

  As a general rule, I would size the SGA on new nodes to 120% of the SGA to single instance. Yes, this means that you will more than double the size of the SGA. You will need additional space to hold the load memory Cache Fusion. And the buffer Cache are possibly a little more space to store additional versions of blocks that seem to accompany the many implementations of CARS. Now, it's just a rule of thumb, so it has a high degree to be very wrong.

  You'll want to consider two big things... (1) the service being used. Will you take advantage of the services to perform the partitioning application? If so, instances can see various workloads that can lead to requests for different resources. (2) you will support a kind of failover (TAF or manual failover) applications? If so, then the LMS must be sufficiently sized to support the additional workload.

  See you soon,.
  Brian

• How to extract the same song, several times using different bit rates or formats and store all the digital music files in WMP 12 default on the same HDD music library

  Using Windows Media Player 12 (w/under Windows 7), "can I ripping the same song, several times, using different bitrates & and/or formats and store all the digital music files in the music library by default WMP - 12, on the same hard drive?

  1.) #1 goal: tear up the same song repeatedly, w / "different rates" as a WMA file.

  2.) #2 goal: tear up the same song repeatedly, w / "different rates" as an mp3 file.

  3.) #3 objective: NOT to each subsequent copy (version) of the song, deleted & and/or replaced by the previous version of the song [even].

  4.) question Bottom Line Up Front--> is Windows Media Player 12 (included with the Windows 7 operating system) are able to achieve '#1 objectives; #2; & #3 above?

  5.) details/example: I want to tear the piece "Maria Maria by Carlos Santana" to my laptop as a Windows Media Audio [WMA] file.  In addition, I would like to rip the song 'Maria Maria' three several times with 3 different bitrates in format WMA; and, as an MP3 file.  Therefore, my final result wished (after the extraction process), will take place the four 4 audio files split up as follows: (a) 'Maria Maria by Carlos Santana'--> Format: file WMA; Ripped @128 Kbps bitrate.  (b) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped to the "Variable bit rate; (c) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped commissioning "Lossless." and (d). 'Maria Maria by Carlos Santana'--> Format: MP3 file. Ripped @256 Kbps bitrate.

  6.) my preference: I do NOT want to rename the file (s). {for example, 'Maria Maria by Carlos Santana' renamed/changed for--> "Maria_Maria_by_Carlos_Santana_128kbps.wma",...} 'Maria_Maria_by_Carlos_Santana_256kbps.mp3 '; etc.}.  In addition, I am not concerned about the additional disk space that will be consumed after multiple copies of the same song with different speeds of transmission and different formats.

  7.) my experience w / Windows Media Player 10 (w / the operating system of Windows XP): using WMP - 10, my goal (s) described above is not a problem at all.  Simply insert the CD purchased by Carlos Santana, containing the song "Maria Maria"... Select the desired Format (WMA; WMA VBR; WMA Lossless; or mp3)... Select the desired flow rate (WMA... 128/160/192kbps_mp3: 128/192/256/320 kbit / s; etc.) ; and click on the "RIP" button to start the copy process on the hard disk of of Carlos Santana's "Maria Maria".  This process (w / WMP-10) would result in having the same song, copied on the hard disk, with levels of quality different "audio" (via the different bit rate settings); regardless of the format (MP3/WMA) which was chosen.

  8.) my experience w / Windows Media Player 11 (w / the operating system of Windows XP): using WMP 11, to described above of my objective (s) could not be reached e-a-s-i-l-y.  The problem with WMP - 11 - in short - which was after the desired selection "Rip settings" tab 'Options' of WMP - 11 (i.e., Format & Bit Rate) and heart-wrenching piece wanted to {'Maria Maria by Carlos Santana'} a moment later/second, WMP11 remove / would crush the previous version of the song [even].  Therefore, the program would NOT allow the user to have multiple copies of the same song on the hard drive of the PC; which obviously restricts a user to have the freedom to choose what level of quality digital audio, they prefer to listen to.

  9.) the ability to have multiple copies [at my descretion] of the same song (on my hard drive) with different bitrates and formats in my music library, is important for me because it has a direct impact on "how I enjoy MY music ', and in what form (audio quality), I choose to listen to my music.  {For example, when I exercise and listening to my camera, digital audio player (Zune), a song ('Maria Maria by Carlos Santana'), will usually be torn off at a lower rate due to the unit of capacity reduction of storage - compared to the storage capacity of notebook PCs/desktop/external hard drives PC.}  However, when I listen to my music through my home cinema or entertainment system (which contains a hard disk dedicated with a large storage capacity), I prefer to load the entertainment system with digital music files that have been ripped to WMA... with the bit being rate-setting is for the: settings "WMA Variable Bit Rate" or "WMA Lossless.

  10.) there you have it.  This is my first post in this forum.  I hope that [detailed] explanations, will be sufficient to encourage these "with knowledge & the hands on experience" using Windows Media Player 12 (as well as with WMP-10/WMP-11 respectively), by providing a [step] "How-to"... "solution to my situation.  It would be highly appreciated.  I'm looking forward-'the solution' - and relevant suggestions & and/or community feedback regarding my request for assistance.

  * Thank 'All' (that would) in advance... For your time & Assistance *.

  Certainly, you can, but I would say that they be in different folders, for your convenience as well as Windows.  You can create one for each debit/format, then you will know who is who.

  In Windows Media Player, on the toolbar, select Tools, Options, Rip, and then select the flow you want first, rip music, then change the folder (higher on the same tab) and rip again... and so on and so forth.

  When you are at home on your home theater, you can use the 320 bitrate folder, when you transfer to the Zune, you can use one of the lower bitrate files (although I personally tear it up to 320 and let the Zune reduce as he wants, even with the iPhone via iTunes, hard drive space is not really a problem here) my server has several hard drives, and I can always add more if and when space is low!

• Running the Single Instance and RAC on the same server of different homes.

  Hi guys,.

  I already have 4 node RAC12c installed on OLE 6.

  I'm planing on some of my other 12 single instance databases on other migration for RAC nodes.

  Please correct me here if I am wrong...

  My understanding is that, to be able to use DBCA or rconfig for conversion of database instance RAC, the only instance and RAC cluster must run on the same server or machine node.

  Thanks to this understanding... Am planing on the installation of a binary single instance on one of my cluster node node1 say and then use RMAN to duplicate the single instance or just an RMAN restore from the node of the instance that is unique to this node1. Am capable of this plan must then use DBCA or rconfig to convert the CARS database.

  Now, my question is can I run a single instance and RAC on the same server for different homes with different database ports?

  2. for these unique instance that runs on the server RAC 1 node, can I use the RAC database listener that runs from the House of the grid or I have to create another auditor?

  Thank you in advance and also let me know if I can use DBCA or rconfig when the only instance and rac database are on separate nodes.

  K

  Fix. And that's what I would normally do. In general, I would have just an ORACLE_HOME directory that can be used by the punctual and RAC databases at the same time.

  See you soon,.
  Brian

• Grid Control 11g of the problems with the basic policy of RAC database

  We have a group of three nodes 11 GR 2 (rac1, rac2, rac3) and a policy based RAC database 11 GR 2 (ORCL) with cardinality 2 (ORCL_1 and ORCL_2) on this group. Used to monitor the Control 11g Grid infrastructure. Founded political RAC databases are linked to the pools of the server and not to the cluster nodes, therefore, restart the cluster database instances can run on both on 3 nodes in the cluster. For example, if ORCL_1 is running ORCL_2 and rac1 rac2 Sir after a full reboot ORCL_1 and ORCL_2 can be run on rac2 and rac3 respectively. Binding of the pool with two special nodes will be as if we use database RAC database administrator and not the policy based.
  
  Now the problem is that Grid Control registers the services in database with the node that is running the instance due to which, once the instances are started on a different node, she complained authorities are declining. We don't have to then reconfigure database instances and say Grid Control that they are now on another node. However, this removes the history of AWR for these instances.
  
  Is there a solution to this problem?
  
  Kind regards
  
  Kashif.

  Hi koko,.

  to work around this problem (I think that there is no "automatic" support in the current version of EM for switching hosts databases), you can create an ACTION_SCRIPT for your database cluster resource that is running the relocate_targets command emcli (so an emcli should be placed on all nodes of your and recorded with Super Administrator privileges). So every time you start your database resource, this script command / move the target to the current host without losing any historical information.

  Best regards
  Robert

  Edit: You can find an example of the command emcli in this document written by Rob Zoeteweij: http://oemgc.files.wordpress.com/2011/02/manage-node-failover-in-an-active-passive-setup-using-oracle-enterprise-manager-grid-control1.pdf
  In this scenario is an active/passive environment, but the command itself appies to your situation, too.

  Published by: Robert Hanuschke on August 1, 2011 13:11

• the ASM disks can be in a different Partition for a database

  Hi all
  I have 2 datababase on the server. I save the data file on MDMDISK1 for the MDM and DWHDISK1 database to the DWH database.
  I can add/dev/sdd5, / dev/sdd6, / dev/sdd7 to DWHDG1 disk group to give more space to the DWH database.
  
  Table of Partition disk configuration
  Group name size GB ASM Disk Disk drive
  / dev/SDS (MON) 107
  / dev/sdd1 7 CRSDISK1
  / dev/sdd2 7 CRSDISK2
  / dev/SDS3 7 CRSDISK3
  / dev/SDS4 8
  / dev/sdd5 24
  / dev/SDD6 24
  / dev/sdd7 24
  / dev/sde (MON) 107
  / dev/SDE1 24 MDMDISK1 + MDMDG1
  / dev/SDE2 24 MDMDISK2
  / dev/SDE3 24 MDMDISK3
  / dev/sde4 24 MDMDISK4
  / dev/sdf (MON) 107
  / dev/SDF1 24 DWHDISK1 + DWHDG1
  / dev/sdf2 24 DWHDISK2
  / dev/SDF3 24 DWHDISK3
  / dev/sdf4 24 DWHDISK4

  user5846399 wrote:

  but I wanted insurance with people with experience as you go this drive on differnet LUN will not impede performance.

  A LUN is a logical unit - it may be a single physical disk. It may consists of 20 physical drives. If the LUN itself does not determine the performance. Performance is determined by the parts in movement under it.

  Multiple LUNS to the same diskgroup using or the volume of file system is a common practice. If this would be a problem (performance or otherwise) depends on the cloth under the LUN.

  For example, a logic unit number could be RAID5 and another logic unit number can be RAID0 + 1. Mixture of different RAID levels is not really a good idea.

  A LUN can be a storage on a San and accessible via the fiber channel. Another logic unit number could be an iScsi device, accessed through intellectual property. Mix very different storage architecture and storage protocols are not a good idea.

  A LUN can be RAID0, through fiber double channels connected to a switch, for the storage of 1 storage server. Another logic unit number can also be RAID0 and accessible through the same fiber channels and switch, but since the storage server 2. Whereby the RAID levels are the same and the storage Protocol and infrastructure the same - and that will not only make a compatible mix, but can actually increases the redundancy if you use these as disk mirrors ASM (which means that ASM can lose the server storage 1 or 2 and still works).