Multiple scales, sides of swap (LV8.5) problem

Similar Questions

• How can I fix "living corners" so that they convert scaled - currently as scale down become more rounded - big problem

  I'm working on a number of complex documents - I redesigned the software screens in illustrator. Many of the components has rounded corners. I created these using the function of the direct angle. Now, I need to take these screens and put in an another doc Illustrator showing a number of devices. I need to reduce the screen files to fit. As I scale down the corners change and become much too rounded.

  I select for a line (STROKE) and to set the value. For the text, I had put to describe. At the same time to avoid problems of this type. What can I do with these white shapes round to do the same. Big problem for me today, I'm working to a very tight schedule that allows no time solving each of them individually.

  Someone at - he found a way to solve this problem?

  Lindsey,

  What happens if you have traits & checked scale effects? You can set that in the Transform palette dialog box.

  Or you can object > Expand to get normal rounded rectangles.

  Just to be sure: snap to grid of pixels and align new objects on the pixel grid are not checked, they are (this would cause other issues)? If this is the case, you can select the entire document and untick finally align on the pixel grid in the Transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher. You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

• The scale and the relationship between the problem of points

  I had a few problems with setting the scale of the objects and their appearance before and after the scaling.

  The relationship between the points change when I change things, and it's a little embarrassing.

  Before that I put across that circle with an arrow, it looked like this:

  

  Then after that I put across it, the lines on the arrow were not in place:

  

  It happens very often when I am scaling of paths in illustrator. Is there something I can do to prevent it? Often I make things evolve upwards or downwards and it is a little painful when I know I'm going to screw up the path.

  

  

  Go to the drop down at the top right of the Panel processing and disable "Align new objects to the pixel grid."

  Edit: If you select 'Web' in the new Document dialog box, "Align new objects of pixel grid" is enabled by default, at the bottom of the box. You can choose to disable it there before OK-ing the creation of the document.

• Side button swap and function of digital Crown?

  Is there a possible way to Exchange functions between the side button and the digital Crown?

  The side button has a click much softer digital Crown that I love.

  

  Hello

  No, I'm afraid that this isn't currently possible (even if it only refers to the functions that involve pressing on rather than turning the digital Crown).

  If you want to suggest that Apple considers adding optional, you can do so here:

  https://www.Apple.com/feedback/watch.html

• Chart with multiple scales of Y

  Hello

  As you can see in the excerpt, I'm trying to plot a graph with several scales of Y. What do you think is wrong with it to get the following error.

  

  Possible reasons:
  
  LabVIEW:  invalid property value.

  I wouldn't change nothing to indexing.  You already wrote this code.

  I clicked the balance you already had and clicked on "Double ladder" to create the second and third.  Once they have existed, the crux of your property has worked fine as it was.

• customize multiple scales of Y in a wave chart

  Hello

  I'm showing two channels in the same form of wave, but with scales graph Y distinct. And I want to customize the two scales Y independently using nodes property. But I found under the node property of waveform graphic, there is only a single scale of Y.

  Does anyone have the experience to customize them independently using nodes of property?

  Thank you

  XP\LabVIEW 2011

  Use the "Active Y scale" property to select the scale you want to act accordingly.

  Scale Y Active value of 0 (the first scale of Y), then set all the properties that you want for that 1 scalethen Y Y Active set at the scale of 1 (the second level Y) and again to set all the properties that you want for this 2nd scale Y.

  Hope this helps

• ADF BC 10.1.3.3 multiple VO on a single entity display problems

  Hi all
  
  I have a table in my database called CARGO. In my application, I have an entity for this table. There is an attribute on this entity, called "ArrDep" with the values "A", "T" and "D". I have three objects in view on this entity, CargoIncoming, CargoTranzit and CargoOutgoing. They use the same SELECT phrases but have different WHERE clauses: ArrDep = "A", ArrDep = "T" and ArrDep = "D" respectively. Then I have a task in my application where the user enters the cargo in three steps, entering, click on next, then Tranzit,...
  
  Although the problem I have is that when a user inserts a new record in the incoming freight the ArrDep attribute is set to 'A', but when he moves to the next page that this line also appears in CargoTranzit VO, even if the value of ArrDep is 'A' and the condition is ArrDep = "T" on the original Version. Only when the user commits changes to the DB and Execute on CargoTranzit is executed the line disappears from the table on jspx.
  
  I know calling Execute always would solve this problem, but I don't want to call Execute every time since the user can navigate backward and forward and if I call Execute whenever any changes are lost if I do not call commit before that.
  
  So, my question is, how can I ensure a rank with ArrDep = "A" appear not in CargoTranzit without having committed or of the execution of the VO?
  
  Thank you
  Kind regards!
  
  BB

  BB,

  Have you looked at the polymorphic VO or EO to do this? It's been widely discussed on this forum in the last week or 2.

  John

• Add the second scale of Y on the right side of a chart

  Hello

  I use a waveform table to display temperatures (scale Y) versus time (X-Scale).

  My card is wide enough to see a range of "long", and I would just copy the scale Y

  and display it on the right side of the chart once again, simply for better readability of the temperatures.

  I tried with the option of customization, but I am not able to copy and paste the scale Y.

  Thank you

  Patrick

  When using multiple scales, you need to set the "ActiveScale' before applying the changes. You can avoid race conditions if you expand the node for your property to include the active scale as the first property.

  Ben

• OfficeJet 6500 e709: prints w / scale on the left margin and does not print right side of the page

  Prints with a wide margin and does not print the last 2 "or 3" on the right side of the page. This occurs even when the value of the left margin to little or none.

  HP trouble shoot said there is nothing wrong and test page prints fine.  Then back to the problem so try to print.

  HI @philg2,

  I see your thoughts produce a wide margin left and right of the page is cut off. What program are you printing from, and this occurs when you print from all programs or just a particular program?

  I see your post that this is not happening when you print a test page, so I think the problem is somehow related to the driver or program that you use. Let's start with the HP print and Scan Doctor is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

  • If you see a red X (), follow the onscreen instructions to fix the problem.

  Thanks, I look forward to hearing back on your part.

• How is scale 2 scales with node proberty?

  Hello world

  I have a problem with the xy-graphs with 2 different scales there.

  What is already done:
  I have a chart with a scale xy y on the left side and a scale are on the right site. I have also 2 locations inside, one is associated with the left and the other with the right y-scale.

  What is my problem:
  I want to set the range programmatically both sides. the left site needs a greater range than the right. but this does not work for me. I can set the range left or the right, but not both at the same time. I tried it with a knot proberty cause I use it already to associate the plots of the scales, but insert "y-minimum" and "maximum-y" to the node affects only a ladder there.

  I work with LV 8.6 (Base)

  any suggestions?
  Thanks in advance.

  Try this. Maybe this will solve your problem.

  You can select active scale and change its range. Change the active scale, then repeat the procedure.

• The multiple images on the screen layout

  Hello

  How do I layout of multiple images side by side in a controlled manner? I'd like have a background image and display several images before this image in different positions. Can I use arrays? Below code is what im going she to achieve but its overriding the paint method. Is there a better way to do this so at least the effort of porting to a different screen resolution?

  Thank you

  protected void paint (Graphics graphics) {}
  Super.Paint (Graphics);
  width int = backgroundBitmap.getWidth ();
  int size = backgroundBitmap.getHeight ();
  Bitmap backgroundBitM = Imagearriereplan;
  If (highlighted)
  backgroundBitM = backgroundBitmapHighlight;

  graphics.fillRoundRect (0, 0, width, height, 10, 10);
  graphics.drawBitmap (0, 0, width, height, backgroundBitM, 0, 0);
                  
  int quarter = backgroundBitM.getHeight () / 4;
  graphics.drawBitmap (10, 10, contestantImageBitmap.getWidth (), contestantImageBitmap.getHeight (), contestantImageBitmap, 0, 0);
  graphics.drawBitmap (80, quarter * 2, costBitmap.getWidth (), costBitmap.getHeight (), costBitmap, 0, 0);
  graphics.drawBitmap (30, quarter * 3, width, height, timerBitmap, 0, 0);
  graphics.drawBitmap (backgroundBitM.getWidth () - statusBitmap.getWidth (), 0, width, height, statusBitmap, 0, 0);
  graphics.setFont (do);
  graphics.drawText (label, 0, backgroundBitmap.getHeight ());
  }

  In this case I would watch overiding paint as you do.  I'm sorry.

  To make this the most effective possible. Transfer the amount of code that you can in sublayout - so have it position all fields and have paint, just painted.

  Your text can be a problem if you need support package.    If they are simple, easy lines.

• Lumetri give me some little weird problem on high contrast clips.

  I got a project PP e-mail file editor.  When he made and export the video, it was happening on its end.  When I visited and export it gives me this weird effect.  I don't know how to solve this problem.  Ive tried to remove effects and re-colouring, but I get the same question, but it's not getting on its end with the same settings.

  This is what it looks like:

  

  

  But then, in this clip, which also has a great ray of light, weather: everything has the same settings

  

  I have a guess if you checked Lumetri scopes on clips of "bad", you would find that you have some highlights above 99 on the left scale in the RGB Parade scope. And most likely some less than 1 or 2 also. You can also have problems with excessive saturation. Sometimes when PrPro "sees" media it seems to push on the top & bottom down, not all that common, but can happen.

  The way it works currently, the 'Standard' tab is not allowed to move whatever it is above 99 or less than 1 so we can't 'break' our images. However, the means... is not going to bring anything he sees as "outside" the limits of the background either. It does not seem to work properly with saturation off limits.

  However, OTHER tabs may all work with these data perfectly. As in...

  

  (1) bring down top-99 highlights strong with the slider next to the color wheel luminance made...

  2) raise up to any below 0 with the slider of luminance next to shadow color wheel...

  (3) make any excessive saturation using hue Sat "curve" which is a forward-looking tool on the wheel. Reduction of set, click the line, and drag. For special colours, use the colour keys to choose a 'normal' shade (R, G, B, y, m, c) or click on each side of your shade of problem to create an outline, and then click & drag in-between these points bring this article a new hue.

  Another method for a control made highlights/shadows, of course, would be the curves tab... Take the ends of the line either bring more away-out highlights blacks down or deeper upwards.

  Everything by doing one of the shows preceding the Vectorscope's Parade & YUV RGB... When you have something outside 1-99 on the parade brought back inside and also hide anything outside the bounding on the vectorscope box inside, your picture looks good again?

  Neil

• Firefox does not and will not connect beyond start page. It won't close properly or restart. Is there a solution to this problem?

  2 days ago just firefox stopped responding. When I open it, displays the splash screen, but is not possible to navigate to other web pages. All I see is "connection" and it just spins. No warnings or timeouts. I thought it was a problem with my firewall, I went and firefox manually added to the list of "permits". That did not help. I removed all applications, extensions and themes and then tried to reset... which did not help because firefox restarts just hangs and I have to use the Task Manager to end the process. I tried a forced uninstall and reinstall... nothing. At this point, nothing seems to work. Perhaps there is a simple solution, I simply don't see. For now, it is uninstalled, but I would really like to know if there is a way to fix it because firefox is my favorite browser. I'm not finding any maleware or viruses on my computer and other browsers work fine.

  Shows details of the system;

  Plug-ins installed

  Shockwave Flash 15.0 r0
  Shockwave Flash 14.0 r0

  Having multiple versions of a program can cause problems.

  Flash is infamous for cleaning is not on the old version as part of an update.
  Take uninstaller from here:
  Uninstall Flash Player | Windows
  Uninstall Flash Player | Mac
  Reinstall the latest version.

  Update your Shockwave Flash v15.0.0.152 http://get.adobe.com/shockwave/

• R7000 problems play 2 ps4s all same same game party

  Hello

  We recently bought the nighthawk R7000 router running firmware version V1.0.7.2 2.4.24 and filled our gateway 2wire ISPS router (ISP said it was the only way to connect and use a new router) to it and put it up for all the devices in our House. Now, before we bought the nighthawk we had no problem playing together, but with the recent purchase of an android minix neo u1 area, we wanted a better smart router. So husband and I started to play fate with some friends and played for less than an hour when all of a sudden the ps4, I was using completely out me. I restarted the ps4 and returned joined and started to play only to be deported again. The next time I'm on, I was unable to get to my husband and he couldn't join me. I looked online for solutions and went into the settings of routers. I checked and UPNP is already enabled and I have reset the QoS settings to the factory think because I had activated the QOS to prioritize the two different ports that have been using the ps4s that could be the problem. I have you will also know the two ps4s are wired in and I don't know offhand speed but we have improved our internet package for a better service and wirelessley is the speed upload 1.97Mbps and the download is 24.76Mbps so wired should be faster than that. If anyone knows what I can do to get the two ps4s running smoothly play together to the common Nighthawk? Thanks in advance

  Thanks for your response James. With a little help from netgear support and looking for a little me. We found our best option was to enable UPnP, enable IPC now that ps4 support and remove rules that I had set the port forwarding. Now, we can play set and have the children watching Netflix or streaming media in multiple areas of the House with no problems at all!

• 10.11.3 WiFi problems (Macbook Pro end 2013)

  Hi everyone-

  This morning, I noticed that my rMBP has updated 10.11.3 Although I was under the impression that I was not in the beta version more.

  in any case, I'm a part of a home where the WiFi signal is sketchy (I tried before with utilities wireless in diagnostic tools), but with this update, I can't get any reception more. On the other hand if I boot Windows 10 side (bootcamp) I can connect... It is at a point (weak signal) but I can still connect. It's the same with an air of iPad 2 in the same place.

  If something tells me the WiFi drivers have declined in this version. Is there anyway that I can change the TX side Mac power for example?

  Thank you

  Houman

  So, I moved to another part of the House where I used to connect no problem WiFi and the same question. Now the MBP sees the Wifi router, but it won't let me connect. Even when I removed the router and tried to connect, it asks me a password, but refuses to connect.

  In contrast, side Windows (bootcamp) has no problem (3 bars) and other devices can connect as well.

  It is clearly a problem of driver wifi on the latest versions of El Capitan.

  Apple needs to hire the best SDETs