MUTE button turns on and stop

Similar Questions

• the computer keeps going into hibernation... How can I get the monitor turns on and stop reading "monitor is asleep."

  The monitor lights. It reads monitor is asleep. Sometimes if I'm patient enough for the computer to turn on and off the screen lights up and indicates that the computer has been hard to get out of hibernation. How can I disable hibernation?

  Hello melissacrowley,

  1. you have the latest drivers installed for the graphics card on your computer?

  I suggest that you update the drivers for the graphics card and check if you have the same problem. You can check the below article which will give you information on how to update the drivers:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• Why program taskbar button turn orange and blinks?

  What are the causes a button Taskbar program of change to an orange color and sometimes blinking?

  Hello

  This feature is by design.

  The programs in the taskbar sometimes orange glow and flash because they are active or if they have a notification.

  For example:

  If you insert a flash drive and AutoPlay works, but you do ot whole auto play program flashes orange and also flash just to see that USB has been detected and there several fot options allows you to select the auto play menu.

  Even in the case where an event occurs on a program that has been reduced to a minimum, then this program will Flash orange spots in the bar.

• my windows vista computer when its loading windows turns black and stops working then starts again and the same thing happens again.

  When I turn on my pc, the system starts the Pentecost a poblem but when windows Vista family premium starts to go the window that allows you to put the password it goes black after a wile it restarts and the same thing happens again.
  safe mode works I have Dome system restore format and reinstall windows and happens again :(

  Hi LGStrike,

  Restore your computer to a point before the updates being installed with the System Restore.  Then proceed as follows:

  1. go in Control Panel , and then select Windows Update.

  2. click on check for updates.

  3. once the results come back, click on the link that shows Important updates and deselect all the updates except the first 3 or almost and install the updates.

  4. Repeat steps 1 through 3 until you receive the error message.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer it shutsdown itself when you play games online like bejewled blitz, when watching video clips. Just, it turns black and stops so I have to restart the computer. What can I do?

  No error code, the computer just died. No change of reasent and I did a scan for viruses with avast and defender.

  It is a hardware problem. It could be a bad video card (where I'd start troubleshooting) or something else. You can solve yourself or take the machine to a local professional. Do not use a type of BigComputerStore/GeekSquad of the place.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot MS - MVP - Elephant Boy computers - don't panic!

• HP envy 17 J160NR: hp envy 17 J160NR mute button does not turn on

  I have a 17-inch hp envy laptop my work button mute it just used to light up orange when cut more I've had this laptop for a year. It was working fine yesterday but when I went to bed last night hp was an update of copying files and other stuff for this, but when I woke up this morning the button mute wouldn't lite upward when you press. and on my laptop the mute button is f6 and the keyboard is backlit. can anyone please help me out and tell me how to solve this problem? It's really annoying, I need help badly please. It is a portable jump movement.

  Hello

  The driving mute functionality is provided by the audio software package, so most likely, Windows has updated this to a version that does not have this feature.

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  When finished, turn off your WiFi card (or if wired, just unplug the router/access point).

  Then open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver.

  When finished, restart the laptop.

  Let Windows load fully, then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  If your mute led functions now correctly, turn on your wireless adapter (or re - connect the access point / router) and use the utility on the following link to prevent Windows 10 automatically update the IDT audio driver again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• HP Pavilion dv6-1334us Entertainment Notebook - mute button color in the key board is always Red

  The color of button mute Audio always on red although the sound turns power on and off when you press.  When the switch is turned off indicator turns white for a second.  Please suggest me the solution so that the mute button becomes red and white on the operation.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  IDT Audio Driver - Windows 7.

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When it finished, restart the computer again and check if the 'secret' led now changes colors correctly.

  Kind regards

  DP - K

• not his (red mute button) after IDT installing on my laptop dv4-1435dx

  This is now my edges burn...

  I've had this laptop almost a year and since installing windows7, there is no sound coming out of this laptop.

  wrong to describe the problem:

  After you install the update for windows7 HP it installed the IDT audio codec, and after a reboot, the mute button became red and will not pass.

  After making back the IDT pilot button turned white, stayed like that and it has sound... but it does not turn red (although the audio sign on the trey turns off Cup-no)

  I updated my BIOS, installed all the drivers of quick launch button, the IDT pilot on the site of HP compatible to my laptop.

  can you help me please?

  OS: windows7 64 bit

  Hello

  Download, but not install it:
  IDT sound sp48668

  Disconnect from the Internet.
  Uninstalling your system IDT audio drivers.

  Resources:
  Uninstall software in Windows 7
  Uninstall or change a program in Windows 7

  Restart your system:
  At startup, press ' F8 ' and choose ' safe mode '.

  Reach:

  Panel-> Manager devices-> Audio, video and game controllers

  and find there sound card IDT. Click with the right button of your mouse and choose uninstall the driver.
  Reboot your system, and this time it starts normally.

  Install the audio driver that you have already downloaded.

• I had problems with my gc, cleaned and he is now allowed outside my control file system system, that it will take place at 68% and stops running

  I had problems with my graphics card cleaned and it works well apart from the system of checking file system on C: turns 68% and stops. If I have to cancel the computer checking seems to work ok, or is it?

  I guess that Mark_S_Sloan is talking about chkdsk /r or running a disk check with fixed error on a restart. so I would say that what I used to say the performance is chkdsk:

  The chkdsk/r can take a long time to complete depending on the size of the volume, the amount of data on the volume, the speed of the system and what chkdsk is to do.  It take about 2 hours for chkdsk/r run on one of the volumes of my1TB (I'm a right that I rarely run).

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.  Give him a chance.

  @Imran M - Microsoft technical support engineer:

  Don't you know that the performance of the auditor of the filesystem (sfc/scannow) does not provide a percentage of completion?  Have you ever used it?

  He also really tell you anything about what he did, or could have done when it is executed even if she finds something to do.

  Everything you see in the Event Viewer system log are messages like this:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64016
  Analysis of file File Protection Windows has been started.

  .. few time later...

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64017
  Windows File Protection file analysis completed successfully.

  Even if sfc/scannow find something to do, you will know about it, because it is not connected.

  That's why use sfc/scannow still more of a waste of time.

• HP Pavilion 17-f065us: power and buttons f6 (Mute) remain lit after a stop on HP Pavilion 17 - f065us

  I have upgraded to Windows 10 in October 2015 and everything worked very well until about two weeks ago, I noticed that when I would stop my computer Power and buttons f6 would remain lit.  I would go ahead and close the lid of my but next time I would go to to open they would always be lit.  I have to press on and hold the Power button until the lights go out.

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close open windows and stop the laptop by right clicking on the icon from the Start Menu, select prompt (Admin) and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start Notepad and let Windows take over completely for a few minutes before checking if the lights now now disable to stop correctly.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• Mute button won't turn off and no sound from speakers

  I have no sound through the speakers cause when I push the mute button, it does not turn off

  Hi eagle115,.
   
  1. don't you make changes before the show?
   
  Try these steps and check the result.
  Step 1: Run troubleshooting from Microsoft to diagnose and fix audio playback problems
  a. see no sound in Windows
  b. click 'Run now' under the section "diagnose and fix sound playback problems" and run the tool.
  c. follow the instructions in the wizard to run the tool successfully.
   
  See Tips for solving common audio problems
  Step 2: Download and install card driver its compatible Windows Vista
  a. visit the system manufacturer's Web site to download the driver or sound card.
  b. install the driver and restart the computer for the changes to take effect.
  c. check to see if the problem persists.
   
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP envy 17 J160NR: mute button does not turn on after update

  I just downloaded and installed the new update of windows 10 anniversery but now my button mute not turn on. It still works it just won't turn on I really need to light.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

  When the reinstallation of Chipset has completed, restart the laptop.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  When he finished, restart the computer again and let windows to load completely for a few minutes before checking it in.

  Kind regards

  DP - K

• How can I get all the control in one place in 3.6.16 buttons, as they did in previous versions? Have the refresh and stop between address buttons and windows search and the home button on the far right is terrible.

  In 3.6.16, the buttons are all over the place. In previous versions, forward, back, refresh, stop and home buttons were all together. In this version, the refresh and stop buttons are between the address and search windows and the home button on the far right.

  I'd love to have them all together as they used to be - much easier to use that way. I tried to install other themes, but the coding of this version too roll themes.

  All the buttons can be moved to the toolbar by right-clicking anywhere that isn't a button or the address bar on the toolbar and choosing Customize...

  You can then drag the buttons around the toolbar to position them toy our taste. When you click Customize... Favorites and Refresh buttons will temporarily turn into regular buttons that you can move around. If you place them to the right of the address bar, they will merge with it. If you move them somewhere else, they will become the normal buttons. You can use this to move a button on the toolbar anywhere you want.

  Themes do not set the order of the toolbar buttons and so will not replace it.

  See the images below for reference:

• HP Pavilion dv6 1335 TX - Mute button is red all the time and not of sound through computer speakers.

  HP Pavilion dv6 1335 TX - Notebook PC (New Zealand)

  MUTE button is red all the time and not of sound through computer speakers. # LED light is 5 according to the guidelines of the manual for the identification of your component externally.

  Processor Intel Core 2 Duo T6600 CPU @ 2.20 GHz, 2200 Mhz, 2 Lossnay, 2 logical processors

  Name of the OS Microsoft Windows 8 Preview version

  Version 6.2.8400 Build 8400

  System Type X 86-based PC

  All drivers works normally and have been checked for updates that were not necessary.

  Turn help would be appreciated

  Hello

  Mute key functionality is provided by IDT Audio software, so the problem may be that Windows 8 has installed a reference driver that does not contain.  Often, the Windows 7 version works Ok, so I would try downloading and installing the following driver IDT.

  http://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48830.exe

  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• How to customize the button 'reload and stop loading "?

  Hello...
  I use FF 30.0. But I'm very happy with her new look and design since the 29,0 version. I want the "Reload/Stop loading" button to the left of the address bar. I fear with its new position if it not get solved, I have to downgrade my Firefox in version 28 again.

  In FF 28, buttons "Reload" & "Stop loading" can be separated. But the Lakes of latest version this feature. The color of tabs I opened is not separated from the color of windows 8. It's weird.

  Note: The classic addon restaurateur theme can not solve this problem. I tried it before asking this.

  Reload and Stop icons are there in customize it (as you can see in almost the central part of your screen screenshot) as it was added by the extension of the RTC.

  Forget the reloading in the address bar.