My "5 neat" software tells me it has stop working? Help, please.

Similar Questions

• Microphone has stopped working - HELP, please!

  Hello.

  My plug-in headset and regular lapel microphone suddenly stopped working.  It was working before and I know that my helmet or conventional microphone are not broken.

  I noticed this problem when I would go to a Voice Chat room and trying to talk into the microphone, the volume bar would move only a little bit and not much.

  I checked all my settings of volume and nothing is low in the volume bar of the Realtek High Definition Audio, or the DD Realtek Audio Manager.  Everything is fine and when I lifted up the microphone, he is selected by default and indicates that it works correctly, but the sound does not come through.

  I am running Windows Vista Home Premium, my helmet is called Dynex, my plug in microphones are called Plantronics and the other on my Logitech webcam.  Help, please.

  ~ Marynonimous

  P.S. I also went to my menu of BIOS and changed my setting audio on-board car Enabled to disabled, and then back to Enabled, and this still does not work.

  P.P.S. My speakers work fine.  I hear people speaking from the voice chat rooms and hear the sounds of my computer.  I hear them on my helmet and my speakers when I unplug my headphones, so my speakers are absolutely perfect.

  Well, I don't have the connected headset on the helmet correctly.  I fixed it.  Thank you.  I'm sorry.  Thank you.  God bless you all.  Love and prayers to Jesus.

• "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150

  "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150, especially when I run 3d games or install Skype 5 and start on this video than the above message appears please advise solution and oblidge. Thank you

  First of all, you're not telling the forum what version of Windows, edition and service pack level your system is running.  Please do.

  Secondly, there is no describe your system.  Tell us who makes your system and its model, if a packaged system.  If not packed, please tell us who manufactured your motherboard and model.  If your video card is another box and not originally shipped with the system, please tell us the manufacturer and model of the adapter.

  Finally and most importantly, please read 555375 Microsoft Knowledge base article, how to ask a question.

  Now, in general, unless your system has a card mother Intel®, you do not want to download an updated directly from Intel® driver.  If there is a system, you will want to download an update of the driver support from the manufacturer of your system model site.  If not packed, see web site for support of the manufacturer of the motherboard for your updated driver model.  If this isn't the case, a card mother Intel®, the reason for the not to load the Intel® GMA 3150 drivers from the web site Intel® is that there may be unhandled in the Inte® base drivers implementation changes.  Nor should download the drivers through Windows Update, except as a last resort.  If Windows Update contains an updated driver, check you motherboard of the system/website of the manufacturer for updates.  Be aware that some manufacturers/motherboard of the system (e.g. Dell) don't feel any economic incentive to keep the drivers/firmware to update if a motherboard system was abandoned.

  No member of this forum is omniscient!  Provide complete information leads directly to all the answers!

• I get a message 'Adobe Illustrator has stopped working. Please activate the fonts Verdana and r

  I get a message 'Adobe Illustrator has stopped working. Please activate the Verdana fonts and relaunch Illustrator. "I looked in my fonts and I do not have the fonts veranda. What I would do.

  You must install all four members of the family of Verdana fonts on your machine. Please check the following thread that corresponds to your question:

  http://forums.Adobe.com/message/5905430#5905430

  Kind regards

  Rambour

• Windows live component software plug-in, connect has stopped working

  Original title: boring

  Hi keep get a small box appears with "Windows live sign-in, add-in has stopped working". What is it you

  Hi WendySmyth,

  (1) when exactly you get this error message?

  (2) what is the complete error message you receive?

  (3) since when are you facing this problem?

  Method 1:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

   

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  If the problem persists, you can post your query on the Forum Windows Live

  Windows Live Forum - http://windowslivehelp.com/

  Kind regards

  Ajay K

• Dell Support Center has stopped working - HELP!

  I get a message on my screen saying that the Dell's Support Center has stopped working and we're looking for a solution.

  I think something happened to this software, but I'm not knowledgeable enough to be able to make it out for me.

  I tried to center of Dell Support from the Start Menu.  The logo appears but nothing else happens.

  What should I do to get it working again?

  Hello

  I had the same problem. Read everything above,

  Tried all of the suggested fixes, but the problem remains still.

  Just before the end of the installation, I got the same message, that is to say:

  "Error getting cert filename (property: Custom Action Data) of MSI.

  As I find it very useful, I was determined to get it back, so...

  I looked in my PROGRAM directory for any sign of Dell Support Center and therein, a subdirectory for "Dell Support Center.

  There were two points in there, or an uninstall program.

  I just remove the entire subdirectory "Dell Support Center", thinking to allow the installation program again.

  then deleted the downloaded "aulauncher" (installation app for Dell Support Center).

  then restarted the pc.

  Then I followed the link to download Dell Support Center of DELL again, the website downloaded, ran it, REBOOTED and all is now ok with my world. :-)

  I hope this helps.

• "License for this product has stopped working" - help

  I use Adobe Dreamweaver CS3 for Mac OS X. Last week my computer crashed. I now have a new hard drive, and most of my data was restored.

  However, when I try to run Dreamweaver I get a message: "license for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product... »

  Perhaps foolishly, I had never bypassed to the recording of Dreamweaver (despite periodic reminders), even if I use a legal copy, bought in the store with its own serial number, and I guess that's the reason why I now get this message.

  I'm not a computer whizz-kid and nervous about what to do next, as I would not lose data or parameters.

  Exactly how do we uninstall Dreamweaver? And when I reinstall I'm still currently having all my existing sites intact, as they were before?

  Any guidance would be most welcome.

  Thank you.

  Dreamweaver CS3 uses the old system of licenses, which really blows. Licensing for CS3 applications on my computer stopped working several times, and each time, it is a task to an hour to get it up and running again.

  You will need to download the licensing repair utility for your system (Windows or Macintosh).

  Delete / {boot disk Volume} / Library/Preferences/FLEXnet Publisher, via the operating system or the Terminal.

  Run the "LicenseRecoveryLauncher" script provided by Adobe. When the opportunity to work normally (entry) or remove (0), press ENTER to run normally.

  Reactivate your software.

  You will need your serial number of product very convenient.

• "Windows Explorer has stopped working" - help!

  Running Vista HP, sp 2.

  Firewall on the router & McAfee.

  WE automatic updates of windows

  In the last two days, I get "Windows Explorer has stopped working" pretty constantly.  Not the kind of endless loop, just whenever I try to use it, it will give the errmsg, close, claim that it restarts and fail to do so.

  I've had a scout quick tour here for solutions and tried all that is obvious:

  (1) run the System File Checker (Nothing found)

  (2) run chkdsk (Nothing found)

  (3) installed and run a-squared (found nothing)

  (4) off the display of thumbnails (past again)

  (5) started in SafeMode (past again)

  FWIW, a few other applications have the same problem, for example Adobe Acrobat will crash all trying to save a file, to the point where it's the folder view.  And Acrobat and Windows Explorer are broken only if you try to display all drives on the computer.  If you start to US at a lower level, in 'my documents' therefore very well with what he shows you.  If you then scroll down to 'computer' and click to enlarge, this is the point where it crashes.

  However, other applications (such as Word) can access and save items to this level, for example I can save a word doc on my phone as another drive of the word itself, although if I tried to slide anywhere in US it would be crushed before I could even see the phone was there.

  My hunch is that it started with what seems to be a Windows Update absolutely unrelated to C++ security two days ago.  But it could be a complete diversion.

  Any ideas?  I'm reaching the end of my tether here.

  Download http://www.nirsoft.net/utils/shexview.html
  Disable all non-microsoft shell extensions (to explore) and reactivate a
  by so this can help.
   
   
   
  --
  ..
  --
  "r3dh3d" wrote in message news: 04e82bbf-458f-48 CF-86e7-6a39480a4a9f...
  > Running Vista HP, sp 2.
  >
  > Firewall on the router & McAfee.
  >
  > Automatic windows updates WE
  >
  >
  >
  > In the last two days, I get "windows Explorer has."
  "> has stopped working" pretty constantly. Not the kind of endless loop, just
  > everytime I try to use it, it will give the errmsg, close, claim that it is
  > restart and fail to do so.
  >
  > I had a scout quick tour here and tried all solutions the
  > obvious:
  >
  > 1) run the checker of the filesystem (found nothing)
  >
  (> 2) run chkdsk (found nothing)
  >
  (> 3) installed and run anti-malware (Nothing found)
  >
  (> 4) turned off the display of thumbnails (past again)
  >
  (> 5) started in SafeMode (past again)
  >
  >
  >
  > Fwiw a few other applications have the same problem, for example Adobe Acrobat
  > will crash all trying to save a file, to the point where it is
  > View folders. And Acrobat and Explorer Windows is
  > crashing if you try to display all drives on the computer.
  > So if you start US at a lower level, in 'my documents' that's fine with
  > what it shows you. If you then scroll down to the bottom in 'computer' and click
  > to develop, this is the point where it crashes.
  >
  > However, other applications (such as Word) can access and save items to this level, for example
  > Can I save a word doc on my phone as another drive of the word itself.
  > Although if I tried to slide anywhere in US it would have crashed before I
  > couldn't even see the phone was there.
  >
  > My hunch is it started with what seems like two days a
  > totally unrelated to Windows update for the security of C++. But it could be a
  > complete red herring.
  >
  > Any ideas? I'm reaching the end of my tether here.
  >
   
   

• Start a new game in Fallout 3 (fallout 3 has stopped working) help!

  I have windows 7 Home Edition premium, I just downloaded fallout 3 out of gamestop. I was happy to play so I booted up and when I start a new game it goes to the loading each time, screen and then hangs. It is for me a window saying fallout 3 has stopped working... I would appreciate an answer I'd like to play this game.

  Hey everybody.  It took me awhile to find the answer to this one.  Recently, I upgraded my laptop older to a new 64 bit Windows 7 OS kernel based Dell I7.  I reinstalled my copy of the edition of Fallout 3 GOY, and it would crash at startup, as soon as I clicked on 'new game '.  Finally after reading hundreds of posts on Fallout 3 crash, I came across this video which showed me the you tube fix. http://www.YouTube.com/watch?v=4GN5HbMsMVE  Basically, the original Fallout 3 (Fallout 3 GOY edition and) does not contain the d3d9.dll file in the directory of Fallout 3.  Download this dll and put it in the directory of Fallout 3 corrected it for me instantly.

  I hope that helps!

• Software BlackBerry Blackberry link has stop working

  Gud Sir, I was using my BlackBerry B4 link & is well, today I have open it & said Blackberry link has a work stoppage not working, pls I need help with this pls, I using Windows 10 on it.

  http://support.BlackBerry.com/kb/articleDetail?articleNumber=000038592

• Dell local security backup has stpped working help please

  I tried to connect to a new website, I am trying to build, using my laptop instead of the family computer. It was because I had access a.net framework of problem a few days ago. So, I got the message that the Dell data safe local backup stopped working.  And to communicate with Windows. I was directed to do my own research through some links, including this forum. I would be grateful if someone can help me solve this problem. Thank you.

  Hello

  If you have problems with "Dell DataSafe Local Backup" so you will have to contact Dell.

  It is their software:

  "What is Dell DataSafe Local Backup 2.0?"

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266281

  You can try their Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• Adode Flash Player 10.1 r85 installation/uninstallation software has stopped working Help

  Get this error message.  Gave me an opportunity to watch a solution saying and click on uninstall.  Clicked and

  two elements of the flash appeared, but only gave the possibility to uninstall only to open or save.  I'm wonderding, if this

  is Microsoft or somewhere else?  Is Adobe Flash - the same as micromedia.com which shows on

  both the two tiems. This kind of thing confuses me no end!

  Thanks for any help.

  Hello

  Flash can get corrupted

  Download and save the uninstaller flash on your desktop or wherever you like from the link below

  then right click on the uninstall program saved flash and run as administrator and uninstall flash player

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  then download the latest version of the reader direct flash from adobe on the link below

  Uncheck the 1 google toolbar before downloading

  http://get.Adobe.com/flashplayer/

  and for more information on this problem if needed:

  below link is Adobe flashplayer support forums:

  http://forums.Adobe.com/community/webplayers/flash_player

  help troubleshooting Adobe flash player

  http://www.Adobe.com/support/flashplayer/

• WMP 11 (vista) every time I go to the library, I get the message "media player has stopped working" help a novice, please.

  I have tried everything I know, that is to say the system restore; uninstall the recent & software downloads. still not good.

  To see which Codec is used

  When reading from the queue on the right, click on it in the current reading pane and choose Properties. On the file tab lists the codecs used. If the current reading pane does not appear right click now plays in the command bar and check to view the list pane.

  Turn off Codecs

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Launch the program and click on the menu Options - Filter Options and check hide Microsoft entries.

  If you have identified a codec first disable this one. Otherwise, go to the Codecs tab uncheck one by one and see if you can read the file. Restart the Media Player before trying to read the file.

   

  Media Player Fixit

  Click play games, music, or sounds, photos or video and see the Fixit Fix Windows Media Player video and other media or library issues .

  http://support.Microsoft.com/FixIt/

  Registration of Media Player and the removal of the database components

  Try also to record Media Player components and the removal of the database.

  Start - All Programs - Accessories - right on command prompt and choose Run As Administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  SC Stop WMPNetworkSvc

  regsvr32 "" C:\Program Files\Windows Media Player\mpvis. "» DLL.

  regsvr32 "C:\Program Files\Windows Media Player wmpband.dll"

  regsvr32 "C:\Program Files\Windows Media Player\wmpsyncmgr.dll.

  regsvr32 "C:\Program Files\Windows Media Player\wmpnssci.dll.

  "C:\Program Files\Windows Media Player\wmpconfig.exe" / reg

  "C:\Program Files\Windows Media Player\wmpnetwk.exe" / reg

  "C:\Program Files\Windows Media Player\wmpshare.exe" / reg

  Ren ' %userprofile%\AppData\Local\Microsoft\Media Flash * .wmdb ' *.wmdb_bak

  SC start WMPNetworkSvc

• Host Service for Windows has stopped working - Help!

  Hello
  the last two days that I had problems when I start my computer.
  When it starts, it cannot connect to the internet & will not answer what it is (for example, if I click on 'my documents', it will not open).

  I have to restart my computer. When it re - start, it works normally.

  This is the message I get from the section 'reliability & history problem ":

  The service host for windows, stopped working

  Description:
  Application of vulnerabilities path: C:\Windows\System32\svchost.exe
  Signature of the problem
  Problem event name: APPCRASH
  Application name: svchost.exe
  Application version: 6.1.7600.16385
  Application timestamp: 4a5bc100
  Fault Module name: ntdll.dll
  Fault Module Version: 6.1.7601.18247
  Timestamp of Module error: 521ea91c
  Exception code: c0000005
  Exception offset: 00052d 94
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 2057
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Additional information about the problem
  Bucket ID: 3883285962

  Can someone help me with this problem?
  Thanks in advance

  Hello Mark,

  Thanks for the reply.

  And I apologize for the inconvenience.

  You can try to proceed with the clean boot follow the link below and see if that helps.

  How to perform the clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after troubleshooting.

  I hope this helps. Otherwise, feel free to write us back with the results and we will be happy to help you.

• Creative Cloud Setup has stopped working. Please close the program.

  HELP PLEASE! I'VE USED THE CLEANING TOOL, IT STILL DOES NOT WORK!

  Follow the procedure below and check:

  Basic Checklist: [optional]

  Make sure that Adobe Creative Cloud is not listed in the control panel. If the list delete.

  You can use Microsoft Fix tool to remove.  If Adobe Creative Cloud is listed.

  http://go.Microsoft.com/?linkid=9779673

  Step 1:

  Open the c: drive and navigate to C:\Program Files (x 86)------\Adobe " common files".

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

  Step 2:

  Navigate to C:\Program Files (x 86) \Adobe.

  Open Adobe file and if present the file to remove Adobe Creative Cloud . [* important]

  If you are unable to remove, simply rename it to Adobe Creative Cloud-old.

  Step 3:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then go to the Local > Adobe.

  Open the Adobe folder and delete folders named AAMUpdater and OOBE.

  
  

  Step 4)

  
  

  Temporarily disable anti-virus and firewall.
  

  
  

  Step 5)

  Click on the link below and download Adobe Application manager and install the same:

  http://download.adobe.com/pub/Adobe/creativesuite/CC/Win/ApplicationManager9.0_all.exe

  Once the installation is complete, look for the icon of Adobe Application Manager launch on desktop and double-click it.

  It will start the update process. and he should get updated to Adobe Creative Cloud app.