Device Manager says no driver base system, no driver of coprocesser
I have a HP Pavilion DV6707 entertainment notebook, AMD Athlonx2 64 processors and using Win Vista. Also, NVidia Geforce Go 7150 M graphics card with video memory shared to 799. My computer man put in a new hard drive for me and installed Win7 home Professor, thought, he'd a beautiful big favor. Now in Device Manager, it now shows the yellow triangle of Base and by the Co processor under that system. I searched HP as Nvidia me returned to the manufacturer to find the specific motherboard and or drivers. HP has no win7 64 bit drivers for this mother on board only the Win Vista drivers. I downloaded the Vista 34 bit driver to a file, but of course Im afraid to try to install. Can a d/l old Win Vista and install with the key on the bottom of my computer? If I do that I will lose all my stuff I've accumulated so far on my computer? All in all I don't see where the lack of driver for this has affected the use of this computer.
According to the hardware Id , the device is a Ricoh card reader then try the following:
To the question of the Synaptics touchpad, you can try the generic Synaptics driver and see if it works better:
http://www.Synaptics.com/en/drivers.php
Tags: Windows
Similar Questions
-
My audio does not work even though device manager says my driver is not working properly
After I re installed Windows XP after the blue screen problems continued I was not able to get my audio.
First of all, I tried several different versions including the MB CD driver and those on the site of Asus for my motherboard. I tried later and I tried the oldest. The only way I could install the driver should disable Microsoft high definition UAA, install the driver, and then I managed to install. I don't know if that is related to the problem.http://snag.Gy/fZi6Y.jpg In the photo, he says no device audio, even when there is a good.http://snag.Gy/4R58T.jpg On the photo, it says that the device works properly. However it only works for a select few programs: League of Legends and my Realtek HD Audio Manager.http://snag.Gy/1C8yj.jpg On the Realtek HD Audio Manager, there is no playback or recording device. I don't know why because my driver is correctly installed.http://snag.Gy/CzhyY.jpg Inside of my Realtek HD Audio Device in properties I found this. It is said that it is enabled but not installed right which is in contradiction with what he says on the 2nd picture. It is said that by noon, table of mixer and Line-in as well.http://snag.Gy/D04a4.jpg It's the only thing I don't understand. I tried to install a driver on it, but it does not. I think that this could be the cause of the problem, but I am open to any response.Motherboard: Asus P5QL ProSound card: integrated on motherboardWhat I tried:-J' I re installed and rebooted several times. I tried at least 3 different versions of the drivers of MB DVD + Asus official website.-J' checked bios to make sure that it is enabeled.-J' checked Microsoft Update and am up to date on all updates.-J' tried to use Microsoft Fix - it and it did not help.If there is anything I can do or that you must see tell me and I'll post it.Thanks for the help, MDQHi MDQ.
It may be a problem with the sound card. Try to use another sound card and check if the problem persists.
-
How can I get my fixed CD drive? Device Manager says "Driver may be corrupted or missing" B
How can I get my fixed CD drive? Device Manager says 'driver may be corrupted or missing.
But when I click on update driver it says "your driver is up to date" and refuses to fix it.
Hello:
I found this link where a person fixed a similar problem with editing the registry.
Make sure that you back up all personal files you do not lose to a portable hard drive and create a restore point by using System Restore utility first, because editing the registry might cause some problems with your PC, also do not start and you have to reinstall the operating system.
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Paul
-
Audio oops: Device Manager says there is no playback device
I have problems with my audio, impossible to get all the sounds of any file or program. Experienced help and support, system scans, then everything else I can think. Device Manager says there is that no playback device control panel says device working properly, what should I try next?
Reinstall the DRIVERS for your sound card (sur-large or a map its 'ad in').
They (the drivers) have been deleted/removed/wipe out.
When in doubt, always... .go back to the 'basics', i.e. to 'start over '.
To fix all computer problems.
-
Built-in camera does not work on my laptop Lenovo Thinkpad E420. Device Manager reports "found driver software for your device, but has encountered an error trying to install Windows" I have windows 8 Windows 7 upgrade.
Appreciate your help. Thank you.
Syed
Hi Syed,
Thanks for the reply with the status of the issue.
I suggest you try to install the drivers for Windows 7 in compatibility mode and check if it works for you. I saw this troubleshooting procedure described working for other members of the community.
Step 1: Download the driver for the Webcam from this link of Lenovo.
http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS015018
Step 2: Installing the driver in compatibility mode.
Make the programs more compatible with this version of Windows:
http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows
Please reply with the status of the issue, so that we can confirm that the issue is resolved.
-
The disc was an external USB disk, but the fitting broke so I took off the adapter and I try to use it via its native SATA connectors. The disc is spinning and the computer know when it starts in Windows XP. It says new hardware found and go through the installation process. Windows finishes the installation, and says that everything is good with the world. I look in Device Manager and it says "this device is working properly" when I click on the drive properties. THEN..................... I click on MY COMPUTER and viola! No. DRIVE shown where the WD5000AADS should be there. There is nothing except my C: drive and my CD - DVD players.
There are a few important (to me) information on this drive and I need to do. HELP Please!
Thank you
twoiron
Hi twoiron,
- You are able to access the other USB devices on the computer?
See the link below and run the Fixit tool available, check if it helps.
A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
http://support.Microsoft.com/kb/925196
If him above fails tool Fixit check if the player is detected in disk management and has a drive letter assigned.
To open disk management
(a) from the start menu, click Run.
(b) in the Open box, type diskmgmt.msc, and then click OK.
If the drive is detected in disk management and the drive letter is missing, then assign a drive letter to the drive and check if that helps.
How to change drive letter assignments in Windows XP
-
Message from the Device Manager indicates TSST Corp. CD/DVGW-TS-T632A has a driver problem Code 10
Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:
http://support.Microsoft.com/kb/982116
These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.
Create a System Restore Point beforehand and restart the computer later.
-
Under Xp (sp3), Device Manager gives me an error for a Walkman NWZ-S545. XP sees it as a MTP device, but it does not start. The Device Manager will give me 2 error messages: device will not start (code 10) not and no driver not found for this device. The walkman works very well with my other machines on the LAN XP but naturally one that I run my media (a all my MP3 etc.) is the one that has the error. All of my PC are almost identical (with the exception of the server, duh). I changed USB ports, uninstalled/reinstalled drivers, called SONY to dozens of times, nothing works. Is a service not started that must be, a driver damaged, what? Thanks for your help in advance.
Hello
I suggest you run the fix that is present in the link below then connect the Walkman on the system and see if the problem is resolved.
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104
I suggest to uninstall the drivers and firmware for the walkman of the system then download it from the Sony site and install it on the system and check if the problem is resolved.
http://eSupport.Sony.com/us/Perl/SWU-list.pl?MDL=NWZS545&SelectOS=7#div_pos_94
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
I have no sound. I went to my device manager and it says that I have not installed. I'm not very computer, so I have no idea where to go from here. If someone could help me I would be very happy!
Hi ShariKB,
· What is the exact error message in Device Manager?
· How long have you been faced with this problem?
· Did you do changes on the computer before the show?
· You have security software installed on your computer?
Follow the suggestions below for a possible solution:
Method 1: I suggest you to follow the steps in the Microsoft article and check if it helps.
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malware
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.
Hope this information helps.
-
my machine continues to say my drivers is not up-to-date, but when I try to update in the Device Manager it claims they are confused? How can I ypdate my drivers for free I just paid so far my OS for win 7
sincerelly,
setcrosss1
If you have a finder driver installed, uninstall it. Very often, they find the correct manufacturer drivers but only suitable for revisions to material beyond the stuff in your own computer.
-
My usb port does not work. Device Manager says he has a "code 10".
My dad recently bought a laptop on ebay. It's a HP Omnibook 900 with a 4 GB HD. The previous owner had improved from the original from Windows 98 to XP with SP3.
It has a USB port in the back & it does not work!
In fact it is not even appear in the Device Manager! I need to select 'Show hidden devices' to see same the USB hub root. The USB port has a yellow warning icon. In properties, it indicates the port is enabled but does not work because of a "Code 10".
What the devil is a "code 10" & how in the heck to solve this problem, so that the USB works?
The port is powered. When I connect devices usb load they turn on & load, but, of course, are not displayed on the computer. My best theory is that the port can be usb 1.0 but the software is intended for usb 2.0 and what could be the cause of the problem. That's just guessing on my part because I do not know with certainty if the usb is 1.0 or 2.0.
It is especialy boring being the only external devices can I plug a CD player (unwritten) & a floppy drive. It would make my life much more pleasant if I could run software, backup & file transfer, etc. with a usb drive instead! It could even than the laptop quite useful to be worth the bucks thirties, my father paid for it!
Help, please. Thank you.
Hi SnarFoo,
Method1
The Code 10 error code is generated when Device Manager it has not enough information or error that has spread upward through the device drivers is not recognised by the Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.
See the article and check if that helps.
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104
Method 2
If the previous step fails, then remove and reinstall all USB controllers on the computer and check if that helps.
To remove and reinstall all USB controllers, follow these steps:
(a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.
(b) click on the hardware tab.
(c) click the Device Manager button.
(d) expand Bus USB controllers.
(e) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
(f) restart the computer and reinstall the USB controllers.
(g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
Advanced troubleshooting tips for General USB for Windows XP problems
-
I recently bought an accelerator of ssd for my computer, and it bugs a few times so I have to remove and then some of my files have been corrupted, so I uninstalled a few programs, when I reinstalled them this error, im using 64 - bit, and I used to play this game in w / the ssd accelerator.now I can not, I tried to check my device manager and it does not load tried to use cmd and same error message appears, "the version of the file...". "Please help me. How can I solve this problem? I tried dxdiag too, back then when I use 64-bit it works normally, now it doesn't.
I tried to do it in safe mode so I can use sfc/scannow, but safe mode is stuck at loading.
Hello
1. What is the exact error message you get?
2 did you a recent software or changes to the material on the computer?
Method 1:
I suggest you to run the checker system files scan as an administrator and a Coachman.
(a) click on Start
(b) type CMD on the Start Search bar
(c) in the list, right-click on CMD , and then click run as administrator.
(d) a new DOS window opens.
e) Type sfc / scannow
http://support.Microsoft.com/kb/929833
Method 2:
If the problem persists, you can start the computer in a clean boot state. Clean boot helps eliminate software conflicts.
This could happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.
Hope this helps and let us know if you need more assistance.
-
device drivers for VGN-NW20EF_W base system
Hello
Need help to find the above drivers pl
Thank you
Tariq
Its a Sony laptop, drivers come from Sony
http://www.Sony.co.UK/support/en/product/VGN-NW20EF_W/updates
-
Missing Base system device driver
I bought my Elitebook 8560p a few weeks back off a friend. Wiped the whole laptop and installed a new operating system (Windows 7 Ultimate 32 bit). I thought I installed all the drivers but im told Device Manager still lack a "Base system device" driver Help please?
Hello
It is very good
The driver you need is for the Card Reader JMicron Media which can be downloaded and installed from the following link.
Kind regards
DP - K
-
Pavilion DV6137ea: Missing base system device drivers
Device Manager reports 2 missing base system device drivers. Hardware ID are:
PCI VEN_1180 & DEV_0592 & SUBSYS_30BB103C & REV_0A
PCI VEN_1180 & DEV_0592 & SUBSYS_30BB103C
PCI VEN_1180 & DEV_0592 & CC_088000
PCI VEN_1180 & DEV_0592 & CC_0880and
PCI VEN_1180 & DEV_0843 & SUBSYS_30BB103C & REV_01
PCI VEN_1180 & DEV_0843 & SUBSYS_30BB103C
PCI VEN_1180 & DEV_0843 & CC_088000
PCI VEN_1180 & DEV_0843 & CC_0880Hello
If please try first and check the result then use the other (if necessary):
FTP://ftp.HP.com/pub/SoftPaq/sp37501-38000/sp37809.exe
FTP://ftp.HP.com/pub/SoftPaq/sp37501-38000/sp37614.exeKind regards.
Maybe you are looking for
-
Help, my satellite A30-933 switch on, when powered by AC are the AC light and the light battery, battery shows as complete, press the power button, nothing happens, when I try with just the battery, some the the lights on the front flash, then go out
-
I had a hard drive failure. Before the break, I could use the wheel button on my Wireless Mouse 4000 for pan Micrsoft. As I loaded a new driver after replacing the hard drive, I can't mouse for crop will only scroll in some applications. Zooms of
-
On my machine (Windows 7, 64-bit), the TrustedInstaller.EXE is permanently active. The amount of CPU used is constantly changing. 2 seconds 0% and then to 50% (I have a dual-core) for a second and then to 0. Restart the machine did not help. Also a f
-
Entry in the list of programs won't uninstall, cannot find the .msi file
I used CCleaner to try to remove the entry, he said "cannot remove the MSI installer. The program is updated to the Apple software.
-
It seems that Windows media Encoder and photo IE10 Viewer are the root of the problem, and it is about the whole MS Platform in desktop for what anyone associated media. As easy as it is to use another browser or image viewer I find I like the windo