My azure VM could not restart

Similar Questions

• error "the application could not restart correctly 0xc000001d. Click OK to close the Clik.

  Hello!!! I have a problem.  I have windows7 64 bit, download cc 2015 first and I can not open. I see error "the application was not properly restart 0xc000001d.» Click OK to close the Clik"I feel the same with After Effects.  I have installed and uninstalled several times and tried different computers and I feel the same way. Anyone know what it can be? Thank you

  Update first Pro CC 2015 (9.2).

  Thank you

  Kevin

• Error, your computer could not reboot after a unexpected, stuck on the black screen

  Original title: Vista startup repair freezes after that give the message "your computer could not restart" and he said that it is looking for problems. I use the original windows disc

  We had a power failure and the computer showed only a black screen.  When I rebooted it, she ran correct problems and they went to green the black screen with scrolling icon on the bottom, which freezes after 30 seconds or more.  I put in the original disc of Vista and ran the fix repairs.  He said it is looking for the most likely, but freezes with blue tab, stopping in the middle of the page.  any thoughts?

  Hello

  You get an error message or code?

  Method 1:

  First of all I suggest you to disconnect all devices external one except keyboard and mouse and try to start your computer and check.

  Method 2:

  Step 1:

  I also suggest you try to start the computer in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you're able to boot in safe mode, you can perform the system restore to the date when the computer was working fine and check.

  Step 2:

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Access the link below for more information on the Startup Repair:

  Startup Repair: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode-1

  Hope this helps and keep us informed if you need help.

• Windows mail did not start because MSOR. DLL could not be initialized

  After a number of updates have been installed, by computer could not restart automatically. When he did re - start, windows mail: could not be started.initialize junk filtering. Your computer may be in memory or the disk is full (0 x 80070002).

  When I press OK, I get: windows mail did not start because MSOR. DLL could not be initialized

  Hello

  What is MSOR. DLL or file MSOE. DLL?

  Perform the steps mentioned below and see if the problem resolves.
  a: Close Windows Mail.
  b: click on Start -run - type regedit and click OK
  c: Navigate to this key
  HKEY_CURRENT_USER-Software-Microsoft-Windows Mail
  d: right-click on that key / export / save under / where you want (with a. Reg)

  e: return this button again.
  f: Position yourself above and then do a right click and delete
  g: Close the registry editor
  h: restart the computer

  Registry warning.
  Important : this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  Hope that helps

• Detcts iPod but ITunes "cannot correctly identify" uninstalled iTunes and then re-installed. Restarted laptop. Folder deleted Apple Lockdown, rebooted, still could not "identify correctly.

  ITunes detects the iPod, but 'cannot correctly identify' uninstalled iTunes and then re-installed. Restarted laptop. Folder deleted Apple Lockdown, rebooted, still could not "identify" during each step, also disconnected iPod USB port.

  Try the following (in that order).  Looks like you're using Windows (not a Mac), so I'll make this assumption...

  Shut down (power off) the computer, disconnect all the USB devices.  Plug the laptop power adapter, so that it does not work on battery power.  Do this Reset (reboot), the iPod

  Learn how to reset your iPod - Apple Support

  Start computer, run iTunes and connect the iPod to a USB direct on the laptop by itself.  If there is no difference, put the iPod in Disk Mode

  Put the iPod in disk - Apple Support Mode

  Then connect to the laptop again, always by himself.  If iTunes picks it up, he may ask you to do a restore with a message on the "recovery."  If you're OK with deletion of the iPod, do the restore.  See if the iPod is "correctly identified" after restoration.

  If the problem persists, you said you uninstalled and reinstalled iTunes, but may not have uninstalled iTunes and associated software components.  Follow the steps in this document to uninstall an iTunes installation components, in the order described all listed

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Then, reinstall the latest version of iTunes

  http://www.Apple.com/iTunes/

• to restart my macbook air early 2015 in windows 8.1 to begin the installation it tells me that usb drivers could not be found, what should I do?

  to restart my macbook air early 2015 in windows 8.1 to begin the installation it tells me that usb drivers could not be found, what should I do?

  It downloads everything and restarts in windows 8.1, then when I click on install now a message pops up saying that miss me the disk drivers important that I don't know what to do

  This is an incorrect error message. Please post the exact error message or a screenshot of the error, if possible.

  See also no drivers were found and the reference to AppleSSD.sys.

• The user interface of logon C:\windwos\system32\msgina.dll DLL could not load or restart the original DLL. Restart

  I created a ghost of a 32-bit 2003 server image and tried to restore the image on the same server of model\type. I got an error message with the following.

  The user interface of logon C:\windwos\system32\msgina.dll DLL could not load or restart the original DLL. Turn it back on.

  Tried to fix the server with the operating system and can not find the disk driver. I found the driver load it on a floppy disk, f6 entry, insert the diskette. I have a message with the following text.

  Type EXIT to exit the consul of recovery and restart the computer.

  1 C:\Windows

  which windows installation would you like to log on

  (to cancel, press enter)?

  Hi MichelZelensky,

  The question you posted would be better suited in the Windows Server Forums. I would recommend posting your query in the TechNet Forums (Windows Server).

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope this helps.

• Windows Vista - after the RESTORE partition HARD drive: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  Hello

  I have WINDOWS VISTA and just tried to reinstall my laptop of restoration on a HARD disk partition.

  The restore went through, but then I got the error: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  When I press 'OK' (which is the only option), it tries to start again, until I get the same error through the black screen.

  How can I get out of this loop please?

  Thank you.

  Lucie

  Hello

  For any problem with the help of the recovery Partition that has been copied to the hard disk by the computer manufacturer, you must contact them.

  This recovery process is the manufacturer, not Microsoft.

  ________________________________________________

  You never told us why you wanted to do a restore. If you had serious errors and the recovery process does not work, you will have hardware problems. BUT we're only guessing at this stage due to lack of information to help you.

  See you soon.

• Windows could not complete the installation. To install Windows on this computer, restart the installation

  Decided to reinstall Vista business after that my lenovo x 200 could not start. After you have reinstalled, had to restart and now it appears

  "Windows is unable to complete the installation. To install Windows on this computer, restart the installation.
  How should I solve this problem?

  Hello

  1. may I know the exact error you received during initialization failed prior to relocation?

  2. do you know the exact reason for the failure of start?

  I will be asked to get in touch with the manufacturer of the system on this issue.

  Installation and reinstallation of Windows Vista, you can fallow the article below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista#section_3

• How can I fix this "Setup was unable to find (or could not read) the language specific setup resource dll, unable to continue." Error if please restart and try again. » ?

  I'm trying to install Microsoft FreeLancer on Windows 7 64 bit Home Premium edition (according to WinVer: Version 6.1, build 6701, Service Pack 1).

  After inserting the DVD in the drive and run "Setup.exe", I am invited by the UAC to elevate permissions - who I am agreement - then the following error message appears: "Setup was unable to find (or could not read) the language specific setup resource dll, unable to continue." If please restart and try again. »

  The only valid technote, I found the issue was http://support.microsoft.com/kb/258496. The below is the list of the things that I tried after reading this technote - but no avail.

  • Of course, I tried to restart.
  • I checked the DVD is in good condition, even with regard to the attempts to install from the disc to a friend and even went up to compare the MD5 of all files on two DVDs, the checksums match.
  • I tried using the compatibility mode for XP, although according to the report of another user on the statements of the Windows Compatibility Center that this should not be necessary.
  • I ran a full "chkdsk" (i.e. one scheduled for after a reboot, rebooted) and chkdsk reported no error.
  • I deleted all files "di - use ' %TEMP%, immediately after the restart and before you run setup.exe.
  • I've looked at this the EMET tool had an exemption for 'setup.exe' and my tool anti-virus was disabled before installation.

  Everything I try seems to have no effect on the resolution of this problem.

  Can anyone suggest any possible causes of--and, ideally, solutions to-this issue?

  Kind regards

  Alex.

  ... "Step 1: perform the clean boot to verify if it's a software conflict matter. '...

  -Tried but not given to impact.

  ... "Step 2: System File Checker tool"...

  -Tried but not given to impact.

  ... "I would have you check the same DVD on another computer and check if it works. '...

  -The only other machine that I use Ubuntu. My other half uses only his Mac.

  I managed to work around this problem by using the following workaround solution:

  I installed Freelancer CD on a Windows XP virtual machine running in VMWare Workstation. I then moved the installation directory (C:\Program Files\FreeLancer) off the coast of the virtual machine on my Windows 7 computer in (C:\Program Files (x 86) \FreeLancer).

  The game seems to work fine as long as it is run with administrative privileges (that is, the freelancer.exe running). Without administrator rights, the games is never recorded. With them, they are registered under "C:\Program Files (x 86) \FreeLancer\EXE\Accts\SinglePlayer" successfully.

• Windows Update cannot check the updates because the service is not running. You may have to restart your PC and Windows store indicates the that purchase could not be completed

  By updating the windows error stating "Windows update cannot check for updates because the service is not running You may have to restart your PC. "  . and also during the installation of applications to store error display ' purchase could not be completed error code 0 x 80070424 "I tried the convenience store and boot, but none of this has solved my problem please suggest me what to do.

  Hello Bond,

  Thanks for posting your question on the Microsoft community.

  I appreciate your efforts to resolve the issue and your efforts to resolve.

  Windows store may not work because the store cache corruption. Windows Update problem may occur if services are related are arrested because of corruption in the Windows updates.

  I suggest you use the steps in this article and the Coachman.
  Reference:
  Error message 'Windows Update cannot Check For Updates' when you try to install the updates
  https://support.Microsoft.com/en-us/KB/2730071

  Please also reset the cache Windows store and check the issue. Please follow these steps:

  a. press Windows + R keys together to open the run window.

  b. type the following command in run and press ENTER.

  wsreset.exe

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Windows 8 could not apply updates, changes, without system restart

  Hi, I have a question for the community. I inherited laptop family which had been neglected for a year or two, and the user only became interested in this topic when it became virtually unusable. Usually, I have no problem to fix things, but this one left me speechless. I am preparing him to be his main portable College. All answers are appreciated! Thank you.

  The problem

  1. The first thing I did was clean reallyyyy good. The anti-virus scanner found and quarantined 17 virus, and 74 infected files and those isolated thus found malware scanner. I did two of each type of scan, and he showed clean. So I don't know, I work with a system bug free.
  2. Then I went to Windows Update and saw that there were 102 important updates waiting to be installed. I laughed pretty hard and then install them. There is no problem downloading or installation of updates, and it prompted me to restart my computer.
  3. After the restart, he said briefly that he was applying updates. And then he said: "failure Configuring Windows Updates. Changes in recovery', and he stays on this screen for nearly an hour and let me finally reconnect.
  4. To ebb in Windows Update, it has installed updates not listed as 'Impossible '.

  What I tried

  1. The tool for troubleshooting Windows 8 "online, Mr. Fix it."
  2. Online draft and the installation of the Windows update that updates the Windows Update program (I don't have the number on me, but I can pick up if necessary)
  3. Installation of a few at a time
  4. Only install the update as soon as possible
  5. Update of article 8.1; He won't let me not until I install the remaining updates, which I am obviously unable to do

  Systems specifications

  • HP laptop
  • Windows 8.0
  • 30 months of age
  • Zero, a hardware or software issues that are known (in addition to Windows Update)
  • Processor i3

  What can I do? I did the basic troubleshooting steps, and I thought before that I really jack he is trying obscure solutions I should post LOL. Thank you!!!

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  or

  Perform a SFC scan to see if there is any corrupt system files.
  Use the System File Checker tool to repair missing or corrupted system files
  http://support.Microsoft.com/kb/929833/en-us

  or

  Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness
  http://support.Microsoft.com/kb/947821/en-us

  Thanks for your help. All those who came negative, and I decided to re install windows 8.

  And after adding only two programs of installing the base, YET the the DO COULD NOT.

  Of course, here, I could see that he had to now be one of the two programs, Google Chrome and Comodo Antivirus.

  It turns out that these errors were caused by a misconfigured firewall and an excess of zeal, even if my comodo firewall with the same settings on Windows 7 had no problems.

  But apparently, it considers that the program Windows Update in Windows 8 is a bit sketchy haha.

  A simple rule change fixed it! Thank you.

• This VM could not become vSphere protected HA and HA cannot attempt to restart after a power failure

  ESXI 4.0 3 running virtual machines.

  600 GB HDD / 8 Gigas of RAM / Xenon QuadCore.

  ESXI 5.5 (I had two).

  Using Raid 01 (1 TB)

  RAM of 64 Gbite

  Hearts CoreI5 Xenon proceso.

  VCenter server deployment with Vmware Storage appliance.

  Problem:

  I've had enough material resources, in fact, I had twice the disk space and memory to four times more in the reception of news

  When migrating virtual machines in ESXI 4 server and get Vcentener turn it on the message "this VM could not become vSphere protected HA and HA cannot attempt to restart after a power failure.  "

  I do not understand because the servers have resources, I can't find what is wrong.

  Should I use another method of migration?

  Once that you have migrated, can solve this problem without re-migration of computers?

  I found this post, but it's no imformation. This VM could not become vSphere protected HA and HA cannot attempt to restart after failure of.

  Thank you

  See:

  Re: This VM could not become vSphere protected HA and HA cannot attempt to restart after a power failure.

• Start Firefox and the message "the update could not be installed. Please make sure that there is no other copy of Firefox running on your computer and then re - restart Firefox, but I do not have other copies running.

  Launch of Firefox & message says update could not be installed. Check no other copy being run, but no don't

  Upgrade your browser Firefox 8 and check

  • getfirefox.com

• HP G62-B50SA: HP G62-B50SA Recovery Manager could not and cannot restart Windows 7

  Yesterday, I threw the Manager of recovery to re - install a release of version Windows 7 box.

  1% of the installation, I get the following error error code: 0xe0ef0003

  After this error, I could not start Windows more BOOTMGR missing

  I tried to press ESC, then F11, but once more, the process has failed

  I had also created recovery CD (in Total I have 4), I try to reinstalled with them by going to F9 and put the CD to be the first boot.

  I get the following error message "this computer does not support the system recovery media. You are not able to restore the system with the media".

  What should I do next?

  Thanks in advance for your help,

  Concerning

  Hello

  Here is another solution, you can try.

  Before you try the following, make sure that you can still read all the key character product activation 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  The source of the Windows Image is Digital River.

  Windows 7 Home Premium 64 bit SP1.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are here.

  Kind regards

  DP - K