my C drive is full of 98% and my D drive is 99% empty

Similar Questions

• What is the best way to backup a hard drive full of pictures and videos on another external hard drive?

  What is the best way to backup a hard drive full of pictures and videos on another external hard drive? I want an exact clone-

  Drag and Drop? Time Machine?

  Thank you. DB

  < object edited by host >

  If you want an exact clone, you will need to use a utility like utility disk, Carbon Copy Cloner or SuperDuper!

• . I downloaded 3 games and my C drive is full already and my D drive is completely empty. Need help

  Hey guys, I just bought an Acer Predator G3-605 today. I downloaded 3 games and my C drive is full already and my D drive is completely empty. I need your help. Thank you

  you need to download and install your games on D: instead of C:

  What do you use to download the games?

• Cannot download HP Officejet Full Feature Software and Driver Pro

  Cannot download update HP Officejet Pro Full Feature software and driver.  HP Officejet Pro 8500 has more

  Is there another way to get the software of subject? (other than on CD)

  Hello

  If you are having problems with the download or the other start or end, try the link below to see if it is not more successful.

  http://ftp.HP.com/pub/softlib/software12/COL32938/MP-81839-3/OJ8500_A910_231.exe

  Kind regards

  DP - K

• HP Deskjet and Officejet full feature software and drivers 13.1.0 fails to be installed

  I recently downloaded HP Deskjet and Officejet full feature software and drivers for my HP PSC 1402 all-in-One 13.1.0 because its software (driver) was lost by my friend.  The printer is connected to my PC with Windows 7 Service Pack 1, which has been upgraded to Windows Vista Home.

  Initially, the downloaded software are operating satisfactorily.  However, after uninstall/reinstall for technical reasons, it shows that "the system cannot find the file specified."  Unfortunately, I am not able to install the HP Imaging Device functions 13.0 and HP Solution Center 13.0 as required.

  I appreciate it a lot if none of technical assistance will be given soon.

  AChung

  Hello

  I am pleased to inform you that I have re-downloaded the software/driver for my HP PSC 1402 all-in-one and succeed in the installation program.  In the meantime, I was not able to locate L3 uninstall or L2 on my PC as shown.

  You mentioned that you were able to complete the installation. If the installation is complete the uninstall file is not necessary.

• My C drive is nearly full, but my D drive is almost empty

  Hi all. I have a hard drive 1 TB, divided in a 250 GB drive C and 750 D player. My problem is that the C drive is nearly full, but the large D drive is almost empty. I have urgent need to move the partition, or transfer a huge chunk of files from C to D drive. The first would be better, or even delete the partition and have one disk, but I tried to move the partition using the Windows utility, and all I could do was reduce the C drive. I don't see how to remove the partition either.

  Which leaves the possibility of moving one of the large folders on drive C to D, which seems risky, but an it vendor told me that I could move the big folder of users (75GB). It seemed risky, but being desperate I tried - and got the error code 0 x 80070057. I would be grateful for any advice on how to solve this stupid problem.

  You can safe your Documents, photos, videos and music files to the other disk.  Navigate to the folder users, your user folder.  Right-click on each one and choose move.

  Remember that the overall performance will begin to suffer when you exceed 75% c in use.

  However, your real problem is the fact that your hard drive is partitioned and it need not be.

  Copy all your data on the D drive in an external storage device.

  Right click on computer, select Manage

  Click on disk management

  Right click on D and choose Delete volume

  Right click on the C partition and choose the volume of measurement.  Extend it up to the limit.

  Copy the data on your external storage on the largest new C space

  Now, you'll have one almost your entire partition 1 TB.

• Windows 7 full screen games and desktop applications losing focus and stealing discussion questions

  NOTE: The updates at the top of this announcement, the original message is less than.

  UPDATES: here are a few updates and new information that I have gained since the original publication.

  Registry settings

  After doing a lot of reading, I found some registry settings that appear to solve some of the problems I see. All three were found in HKEY_CURRENT_USER-> Panel-> Desktop

  ForegroundLockTimeout: Has been reset for some reason any. I removed the key and restarted, but he is back to zero. This is why I looked at the default value of 200000 (decimal) and set it. After that, he stayed. \

  I saw two other keys HungAppTimeout, WaitToKillServiceTimeout, and WaitToKillAppTimeout and all have been set to zero. I deleted these registered.

  I have no idea what set these registry keys to zero, but after being put into default, I can now click on an application full screen reduced, and he returned immediately. I can still lose focus in full screen or desktop app, but not as often as before and now he is usually just badly behaved apps stealing focus rather than seemingly random events.

  I wonder if there is a patch that has changed these values, or a settings option that does. From what I read, they are sometimes twisted to allow faster restart and stop servers.  I don't have a software that would be while and manually set their and none have the people I know. One of them has confirmed that their box also has these set values zero and has no idea why.

  I hope this information is useful to other people with odd focus problems.

  ORIGINAL POST FOLLOWS *.

  I have a problem in Windows 7, which at first I thought a number of different problems, but I am more convinced that they are all connected.

  All of them started to happen around the same time - late January or February after a Windows Update - and largely the same or very similar issues affect 3 of my friends and co-workers running Vista and 7. Unfortunately my notes on the update happened while the time are missing, but all 4 of us have seen questions start at the beginning of the year in the January/February calendar, which makes it seem like they should be linked.

  NOTE: There were a few minor problems before even with the update, but nothing like what happened in early 2011. I had problems to update with Vista and 7 alone, but they were rare and sometimes fixable with registry hacks or it was an offending program, something did not like Aero, etc..  The questions below got a lot worse in early 2011 so they appear together in this post.

  I will describe each problem separately and the affected BONE and the symptoms, and I hope that some can make sense and help me solve the problem. Major problems first, then a few small problems and measures that I took to the to check follow after. Sorry for the long post, but it's a maddening problem affecting many people, and I want to be as complete as possible.

  Games not switching and the apps full screen #1: if I'm in a game fullscreen and I go to the office, it is very difficult to go back. If I click on the taskbar icon, nothing happens. I have to click on it repeatedly, often a dozen times or more before the application full screen or game is restored. It is most often with the games. Full screen I don't want not maximized, I mean where a program takes the entire screen. Games is easier to reproduce so far have all I currently use the question and variances in how it is difficult to come back in full screen are not significant between them.

  Apps full screen #2 focus lost: this happens especially to my friend running Vista, when you play the game full screen. She will play something like the Lord of the Rings Online and she loses the keyboard focus and the mouse, but the game is always full screen. Usually the only way that she can solve the problem is to use CTRL-ALT-DEL to bring up the Task Manager, which for some reason solves the problem and she can return to the game for a little while that. I run Windows 7 with another couple of friends and we can also see this question, it is much less common. Changing an old mouse seems correct for Vista for some reason any. 7 that it happens rarely, if hard to duplicate to see if changing the mouse would help. In any case, will and against a beautiful new mouse laser mouse is usually a horrible option.

  Office applications #3 lose focus: it affects two of us under Vista and 7. We will be typing in chat, email, anything... and the foreground app will lose focus. What catches there that is impossible to determine. In my case, I can occasionally see a taskbar popup button and then disappear immediately, but I have never been able to track it down. Running in safe mode or boot seems to have no effect on this, or disable all services, extension and program but by default Microsoft in Windows 7 and Vista. Its almost like a Microsoft program is to do. Also, even though I mentioned the taskbar icon appears briefly from time to time, which cannot be bound: it does not always coincide with the loss of focus and is not always present when the focus is lost.

  #4 desktop applications lose keyboard focus and the mouse: it's like the number #2 above, but happens at the level of the office. Unlike the #3 that the window does not lose focus, it is always in the foreground, but keyboard and mouse stop working. It is usually impossible to move to another window. Just like #2, the solution that we have so far is to use CTRL-ALT-DEL to switch to the Task Manager, which temporarily solves the problem. ALT-tab through windows does not work.

  Here are other minor problems that may or may be linked, because they seemed too much to start with.

  Switching away applications full screen takes more time: Windows 7 on my machine, switching off games full screen takes more time than he did in the past. It was a minor issue in autumn 2010 and became much worse early 2011.

  Some windows lost focus while being re-size: if I take the corner of some windows for re - size, sometimes the re-size operation stops until I release the mouse button, as if he has lost the focus. Color of the window indicates usually focus however is still there, and grabbing the corner once again we will move me a little more. It may take several tries to get the window size as I want, as the re-size operation closes several times before I release the mouse button. This affects only 2 of the 4 people I talk so much that I can tell from our conversations and shared between Vista and 7. Both of us have Logitech mouse it might even be a driver problem, but using a mouse cheap test has not fixed the problem with me.

  Firefox: Firefox repeatedly will "dim", where Aero makes the window lose color to indicate that the application is not responding. It didn't happen before January 2011 for any version of Firefox.

  Concrete results to track down the problem:

  I ran programs like WhatHang and others who are trying to catch the programs that are suspended, stealing focus, etc.. Hours of testing found no results except that Firefox crashes frequently. Disable Firefox doesn't solve all the issues however, so I guess that its not related.

  I tried booting safe and clean, and they have had no effect. Secure boot is rather useless since I can not usually run programs that show the problem more easily. I also tried turning off everything except what comes with Windows 7, and it had no significant effect.

  I tried to use a different mouse. While it helped a bit with one of my friends, it only helped me so far. Different mouse drivers do not seem to help either. I also tried various nVidia without significant information acquired or corrective drivers.

  I also ran through various other ideas here as the race of the file system scanner and so on and not found any problems with my system, and where I could help my friends do and they also found nothing of note with maintenance and verification tools.

  My friends and co-workers: most of them are not local to me, so my focus of their issue has been rather limited. The main thing that we all have in common is that we had some minor problems in the past, as in 2010, and they've all got a lot worse in early 2011. Unfortunately none of us kept of records accurate enough to indicate any special updates that might have caused it.

  In any case, I apologize for the log message, but this issue emphasis is maddening. Its become a frustration serious then I thought to post information on the problems which seem related would be the more useful approach.

  I am a graduate of comp-sci systems and a companion systems programmer, and I have tried everything I can think of to debug and isolate problems, symptoms, etc. and had no chance. My friends are usually illiterate computer so that they are even more perplexed and frustrated by this problem. In my reading the forums, I see a lot of Windows Vista and 7 discussion questions, but rarely a lot of details, and when a problem is identified, it this far does not apply to me or my friends.

  I am happy to provide any other details I can.

  Updates:

  I forgot to mention that I have a Setup dual monitor. Aero seems unhappy with it, a lot of flicker when switching to full screen in games and other applications. I guess its because a single display off Aero while the other has it we or maybe not accelerated. Remove the second screen does not solve the problems I see, but I mention it in the interest of further development.

  I want to just chime in that I see similar (but not exactly the same) behavior and time seems to match as well. Among the updates must have messed something up. I forgot my Cardinal never update rule anything :/

  In any case, I have a few specific questions all problems related to full screen/window/input. When you play the Witcher, when you look at, if the mouse touches the edge of the screen, it stops, thus giving a very narrow range of angles I can watch from. Baldurs gate, as soon as I hit any key, I can't click on anything whether (and what I typed does not appear). Looking for police 3 (dosbox) it works fine until I hit a key, and then the mouse bounces oddly around the screen. If I alt - tab, in these 2 cases to last and go back, the problem is solved until I have a button again. In the case of the Witcher, if I alt tab and click the icon to the taskbar, it seems this problem, until I have a press.

  And I'm sure I had none of these problems a few months ago. I have tried everything I can think :( I tried the registry settings, but they do not seem to help.

  Edit: Oh, almost forgot. Whenever I click on full screen on an online video, like youtube, it appears in the background behind other windows, and then I have to click on it in the background to bring it forward. Very weird. Not sure if it's related. I'll try to change my video drivers... So boring when everything was working fine a few months ago.

  Edit 2: Do not take into account my post, I had a program called synergy race (usually use a mouse on multiple computers at the same time). Apparently, he was the problem.

• How to cancel the FULL SCREEN mode and return to tasks and toolbars?

  HOW RESTORE toolbars and taskbar?

  Mode full-screen:

  • the key active F11 / off Mode full screen on and outside
  • ALT + V + F will toggle Mode full screen on and outside
  • Move your cursor to the top edge of the screen, right click in the empty box on one of the toolbars that slide down and choose "exit full screen".
  • Press the ALT or F10 key to temporarily show the Menu bar and click View > full screen to check or uncheck (checked = Mode full screen on;) UN - check = Full Screen Mode off)
  • See-> http://kb.mozillazine.org/Netbooks#Full_screen

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• I went the full screen mode and don't like it and need to know how to get back to what I had. Also, is there a good way to set up bookmarks? As in a column to the left or right? Thank you.

  I went the full screen mode and don't like it and want to return to what I had. Also, is it possible to create bookmarks so that list them all in a column to the left or to the right?

  Right-click on an empty part of the toolbar tab and choose "mode full-screen output.

  If you do not see the toolbar at the top of the page, move the mouse to the top and you will see, it seems.

  If this answers your question, please click the button solved next to this post after logging in to the forum. This will help others looking for a solution to the same problem.

  Thank you.

• HP Envy 110: HP Envy 110 "full feature software and drivers" - must use the USB cable?

  On another thread, it was recommended that use "full feature software and drivers" to solve a problem I had with a scan on my HP Envy 110.  This network printer using a WiFi connection.

  In order to take advanatage of the features in this S/W, I must be hard wired USB connected to my PC, not only for the installation, but also for operations?

  Hello

  The HP client software full functionality provide the functionality of most software, any type of software supports any type of connection.

  You can choose a wireless network or a USB connection during installation of the software...

  Kind regards

  Shlomi

• All-in-one HP Officejet 5610: cannot install HP Deskjet and Officejet full feature software and drivers

  I downloaded AIO_CDB_NonNet_Full_Win_WW_130_141.exe to install the printer HP Deskjet and Officejet full feature software and drivers, but encountered errors verifying system requirements. The dialog box said:

  

  How can I resolve this installation issue? Can already print to the printer, I would like to install HP Solutions Center to use other functions like scanning.

  Hello

  Pelase follow the thread that I posted below to rename the utility Check Intel USB and then try to install the software:

  http://h30434.www3.HP.com/T5/printer-software-and-drivers/D110-fails-to-install-on-Windows-7-no-USB-harware-found/m-p/5612495/highlight/true#M85778

  Shlomi

• Is there a camera without a mirror Canon with a full frame, GPS and WiFi sensor?

  Is there a camera without a mirror Canon with a full frame, GPS and WiFi sensor?

  kenka433 wrote:

  Is there a camera without a mirror Canon with a full frame, GPS and WiFi sensor?

  Canon 6 d has a full frame, GPS and WiFi sensor and can be opertated in LiveView mode mirrorless.

• C almost full disk, drive D is empty... what should I do now?

  My C: (29.2 GB) is low on space... I have QuickBooks & Peachtree programs on that I can't get rid of.  They will not uninstall it. I even moved the files on the D: drive, but it wasn't enough.  I want to do a restore of the system, but not enough space.  I have an empty D drive (418 GB).  How can I make this work?

  My C: (29.2 GB) is low on space... I have QuickBooks & Peachtree programs on that I can't get rid of.  They will not uninstall it. I even moved the files on the D: drive, but it wasn't enough.  I want to do a restore of the system, but not enough space.  I have an empty D drive (418 GB).  How can I make this work?

  As the D drive is completely empty, i.e. unwanted data on it, you may be able to use some of its space to extend the C drive.

  Right click on computer > manage > storage > disk management to show current partitions from left to right. If drive D is immediately to the right of C in the graphic layout, your luck is in, so:

  1. right click on the D chart, then choose Delete to leave unallocated space.
  2. right click on the graph C and choose Extend and select the amount of space you want to extend it by.
  3. all the space you have left in (2) can be set up as a new drive (smaller) D by double-clicking on it and create a new Simple Volume and formatting.

• How to replace the 'full' Menu Option and "close".

  Hi all

  I need to know how to replace the full menu option and the narrow, while I don't have a menu option in my class of the screen, and also I do not call superclass «super(DEFAULT_MENU |)» defult builders DEFAULT_CLOSE); »

  can someone give me some samples?

  Thank you very much

  Override the makeMenu() method in your form class and leave it empty.

• How to recover full date format and time of cursor Variable

  Hi gurus,

  I'm having this 'cable' question.

  When I run this selection (below) of a table (a table with a date data type can be used for testing purposes)

  Select max (crt_heure_entree) in the test.var_table_date MAX_DATE

  MAX_DATE

  -----------------------

  21/12/2015-15:33:57

  When I run inside a PL/SQL block

  Declare

  CRS1 DATE;

  ..

  ...

  Select max (crt_heure_entree) as max_date in crs1 infapp.compte_rendu_traitement;

  dbms_output.put_line ('MAX_DATE... » || TO_DATE (crs1,' DD/MM/YYYY HH24:MI:SS'));)

  ...

  ...

  END;

  I get

  MAX_DATE

  -----------------------

  21/12/2015

  Problem:

  I need to get the full value date and the time to do a select and insert data between call dates and times.

  Because the variable retrieves just the date I have problems of constraint violation.

  Question:

  How can I recover the full date / time format of cursor?

  Thanks if you can help.

  Format before you print using TO_CHAR

  Here is the link for the Format of Date patterns

  https://docs.Oracle.com/CD/B28359_01/server.111/b28286/sql_elements004.htm#CDEHIFJA

• We tried to install Adobe first Element and he repeated to me that drive E is empty.

  Adobe Premiere elements 13.1 keeps saying drive E is empty.  We got around him, changing the name of another letter.  Why did do that?

  Véronique

  Please explain your question a little more away. Here's your scenario?

  1. you have installed Adobe Premiere elements 13 (on which OS computer?) Supposed the installation disc and the default location on the Local c drive.

  2. you insert your installation disc in the tray of the burner, the burner is the E drive? And, you get an empty message E drive instead of automatic reading

  you click to start the installation path?

  There is a known issue with the elements first 13/13.1 where installing this version an error No Disc. The fix for this is deletion or deactivation of the OldFilm.AEX

  file in the path

  Program Files

  Adobe

  Adobe Premiere Elements 13

  Plug-ins

  Commune

  NewBlue

  and in NewBlue folder is the file OldFilm.AEX that you remove or disable renaming of OldFilm.AEX to OldFilm.AEXOLD.

  What kind of Blu - ray or DVD/CD burner DVD burner has been involved in this situation - internal or external?

  RTA