PowerEdge T320 / Seagate Savvio 15 k SAS hard drives

Similar Questions

• Seagate FreeAgent GoFlex USB external hard drive problem

  I have a Seagate USB external hard drive. It is loaded with all my pictures and music. I can not open. I did in the past without problem.  It is a Seagate FreeAgent GoFlex. It says that I have the drivers updated. I've started and restarted. uninstalled and installed etc. It's also almost if there is nothing on the disc. When I plug it into the USB port it will not appear in the my computer tab, however, it shows in the toolbar at the bottom as installed but with nothing on it. When I run the troubleshooter, it says that the problem can not be detected, but it also says that the device is functioning properly. I do not know because I can not the specifics to fill. Y at - it somewhere that I can take this drive to see if someone can see if my files are always about this and that so they can transfer to another drive? Help, please!

  [Moved from comments]

  Hi Philippe,.

  Welcome to the Microsoft Community and thank you for the post about it

  It seems that when you connect an external hard drive Seagate USB to your computer, there is no indication in the drive. I appreciate the action that you tried to solve the problem.

  I would like to know the following information.

  (1) what version of Windows is currently installed on your computer?
  (2) have you tried to connect the hard drive to other USB ports?
  (3) you are able to use other USB devices?

  I suggest you to connect the hard drive to another computer and check.

  Your answers are important to us, please write to us with the requested information so that we can help more.

• WHS 2011 SAS hard drives showing up as removable media

  I have a WHS 2011, I built and with it, I installed 5 SAS 1 TB hard drives each and they are connected to a dell sas raid controller SAS6/ir, after research in disk management to try to make a new split volume a disc appears only four make their appearance as a removable media , and I can't use an any of them.

  Hi Stevensample,

  Given that the problem is related to Windows Home Server 2011, you must validate your application in the Windows Home Server Forum to get help.

  Windows Home Server Forum

• Windows 7 64 bit does not recognize the Seagate Plus 2 TB external hard drive backup

  I am unable to get my laptop running Windows 7 Professional 64 bit to recognize my 2 TB Seagate external drive. Seagate tech suggests that I need a chipset driver-whatever that is. I tried many times to install Acronis DiscWizard, but get a fatal error message. I had no problem to install on my desktop and perform the backup. It takes also place W 7 Pro, but 32-bit. Help!

  I reformatted the drive on my desktop to make three partitions: one for my office, one for my laptop and a spare part for what I might need to. Then, I downloaded DiscWizard on Seagate website. It works on my desktop, but not my laptop. My laptop is a Vostro 3550 about three years, and I've never had other USB connection problems. I tried all three USB ports and none works. My office is older, about 6 years old.

  The error message is the following

  Installation failed

  Fatal error during installation

  When I tried to install DiscWizard. I wonder if the fact that my office is 32 bit and my laptop is 64 bit is a little difference. I installed first DiscWizard on my desk.

• Error code 28 'the drivers for this device are not installed' for Seagate ST905004EXA101 - RK 500 GB hard drive.

  Original title: Windows7 does not recognise seagate expansion drive.

  Expansion drive model: ST905004EXA101 - RK Seagate 500 GB

  Microsoft Windows 7 website says that it is supported.

  The drive works in another laptop with Windows XP.

  Try installing in another laptop with Windows 7 Enterprise SP1.

  In Device Manager, I get a message "the drivers for this device are not installed. (Code 28) »

  Hi PinakiDeb,

  You can follow this link & check if the problem persists.

  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201235&NewLang=en.------

  Hope the helps of information.
  Please post back and we do know.

• PowerEdge t110 ii question: map graphic and HARD drive

  Hello

  I recently bought a t110 ii with the Xeon E3-1230v2. I bought it for self-study and use as a work/homelab station server. (I got for a price lower than any offer of work/Office equaluivalent position).

  I searched on google for answers and couldn't find the messages dating back to 2012-2013.

  I was wondering if anyone has experience with compatible graphics cards that were released this year or last year.

  I understand that the PCIe connector can support up to 8 x power 25w (as read on other discussions).
  Is there a graphics cards of current generation that I could use.

  I'm not planning to use this for the games, the main use will be for virtualization and use it as a workstation from time to time.

  Then regarding politics HDD/RAM and the Dell warranty,.

  I was using my own disk sata hard and the possible upgrading ram later down the line. Open the chassis for upgrades or install third-party components will void warranty of the machine even if these elements were the reason for the failure.

  I would have purchased from Dell, but unfortunately cannot me like my student budget.

  SR2002,

  As Dell does not recommend 3 party graphics cards, the T110II supports it. Given that we do not recommend the use of them, we are actively testing the different manufacturers. Now, I met a former postwhere, they say, they used a NVIDIA GeForce G210 512 MB DDR2 PCI Express video card in the T110 II and it worked.

  To answer your next question, add and upgrade parts to the server will NOT void your warranty, but added devices that has been obtained through Dell will not be covered by the warranty.

  Let me know if this helps answer your questions.

• Hard drive SAS 1 TB per Dell PowerEdge 2900 [MS]

  Buonasera,

  avrei di una quotazione by a SAS hard drive need da 1 TB Seagate ST31000640SS da cute in UN Server knew sostituzione Dell PowerEdge 2900

  Saluti,

  Enrico

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  - Service tag del Server

  By the spedizione (intervento o):
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società (is it client code):
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• PowerEdge 2950 - order replacement HARD drive

  We recently replaced among 300 GB three SAS hard drives in a PowerEdge 2950, after seeing 1810 Code error 1 HARD disk fault.  We would like to order replacement disks to have on hand, but must be sure that we order is fully compatible.  The reader, we have removed is Seagate ST3300656SS with Firmware HS09 and certified as a disk HARD of Dell Enterprose class.  I understand that just order a Seagate drive of the same model number is not enough.  How can we be sure we are ordering the right items?

  finbarrd

  How can we be sure we are ordering the right items?

  Make sure that the disc is "certified" (Dell co-branded with a Dell Reference number):
  http://www.Amazon.com/Seagate-ST3300656SS-Dell-Cheetah-LABELED-ST3300656SSDELL/DP/B003FO8POG

• Raid PowerEdge r.620 with single hard drive controller

  Hi all

  I have Dell PowerEdge r.620 with 1 * 1 TB hard drive, Raid Controller using mini H710... When I try to install Win Server 2008/R2 x 64 the HDD is not detecting, I've read in this forum of the disc cause hard does not detect is pilot raid is not installed, but I don't have that single hard drive is possible to set up raid with single hard drive or I don't have to use raid controller but I still don't understand how to set up the server with no raid...

  Thank you...

  Dimm21

  Sorry for the late reply, do you mean raid controller in the server? If you want to say, I always do not install driver coz is new server than i've got...

  I want to know, if posibble install raid on one hard drive and how to configure who... Server raid controller is mini H710

  Thanks for your response

  Yes, the RAID controller.  One you have?  I'll assume a PERC H710 for now:

  The H710 PERC is NOT compatible non-RAID (you cannot use a single disk without RAID)... in order to use a hard drive, you MUST configure a single drive RAID 0.  This must be done in the RAID controller BIOS utility, accessed by pressing CTRL-R during POST when prompted.

  Once configured, you need TO load the driver for the operating system, see the drives connected to the controller.

  If you have a H310, it SUPPORTS no RAID, so you do not have to configure anything in the RAID controller BIOS, HOWEVER, you MUST always load the RAID controller driver during installation.

• Windows 7 asks Me to format the Seagate FreeAgent external hard drive I've used for more than a month

  I used Seagate FreeAgent as my external hard drive for more than a month now, but recently I am unable to access Windows 7 asks me to format it to use it. Somehow I can format the HDD without losing my data?  Or does perform a work around?

  Hi NuVille,

  Before perform us any of the steps, first of all I suggest you to create a backup of the data stored in your external hard drive on another computer.

  To save the data, you can connect your external hard drive on another computer and copy all the files and folders on the other computer. Later, you can connect the external drive to the Windows 7 computer and try to run the disk error checking and check if that helps you solve the problem.

  Access the link below and follow the steps to check the drive for errors and fix it.
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  After completing the disc you error checking, try to check if you can access the drive.

  If the steps above do not I suggest you try to format the hard drive. Access the link below and follow the steps to format the hard drive.
  http://Windows.Microsoft.com/en-us/Windows7/create-and-format-a-hard-disk-partition

  Note: there is no way to format without losing any data on the disk. Formatting the drive will erase all data.  This is why you must back up the data before formatting the hard drive.

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Seagate external HARD drive expansion will not identify Windows 7 x 64. OK in a first time and fine on Vista x 86.

  Recently installed Windows 7 Home Premium x 64 Vista Home Premium x 86. Under Vista, everything was fine. Less than 7, my Seagate expansion (1.5 TB) hard drive initially was recognized (I have iTunes library I can't play to prove :)) after a few days using 7, however, I lost the external HARD drive. I get the error message is "software device driver is not properly installed." In Device Mgr, it says it's an "unknown device" with the yellow! triangle. "Windows has stopped this device because it has reported problems. (Code 43) "appears in the details of the device. No updated drivers are available. Windows updates are up to date, nothing helps. Restart, reinstall, restore driver, deactivation, nothing works. Tried to update my BIOS, but it is already the latest version of Dell. Trying any other Dell Update, what it offers is the Download Manager, but not actual updates I select. I'm not allowed to use this player all of a sudden, after that it worked fine for a few days!

  Specific features of the system are as follows:

  Name of the operating system Microsoft Windows 7 Home Premium
  Version 6.1.7600 Build 7600
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  System name PHIL-PC
  System manufacturer Dell Inc.
  Inspiron 530 s model system
  System Type x 64-based PC
  Processor Intel (r) Pentium (r) Dual CPU E2180 @ 2.00 GHz, 2000 Mhz, 2 Lossnay, 2 logical processors
  BIOS Version/Date Dell Inc. 1.0.18, 24/02/2009
  SMBIOS 2.5 version
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume3
  Hardware Abstraction Layer Version = "6.1.7600.16385".
  Physical memory (RAM) installed 4.00 GB
  Total physical memory 4.00 GB
  2.54 GB available physical memory

  Thanks in advance for any helpful info!

  All this occurred within three days of using Windows 7 x 64, so I don't think there is a previous restore point to go back to. However, I would not I install updates to be rendered unusable and allow my system, and their insecurity. And, as stated in my original post, I have gone through the drivers to uninstall or disable normal, remove, reinstall, etc. etc. without help.

  An update my original post, I finally got the unit of work, although not as fast as it was in Vista x 86. I did back up the device to a laptop from Vista Home Premium I have, let it load the drivers it needs, and then after reconnection to 7, it has been working well, but overall slowly in read/write functions and clicking on a lot more than he did primarily when operating. What I went through get this thing to work, I think that the currently loaded driver is for a 32 bit OS, and there is no update (again) for 64-bit. I leave it alone, because it is functional, and if it is not recognized after the next set of Windows updates, I guess I have to restore to a previous image.

  Dell doesn't seem to have anything for her, and Seagate plans explicitly on their site that they don't provide drivers for this HARD drive while referring to Microsoft or the manufacturer of the equipment for drivers.

• EqualLogic PS4000X HARD drive replacement

  Hi all

  We received a helping hand me down PS4000X configured using Raid 10 and out of warranty.
  1 the 450 GB SAS HARD drive has failed.

  Dell support is waiting for response from the manufacturer if they can still provide this particular model of HARD drive
  St3450802ss Seagate Cheetah.

  I understand that the PS4000X supports 400/450/600 GB SAS HDD. But his rare ability and hard to find new replacement.

  Would it be possible if I just replace the defective HDD SAS with a 500 GB or 1 TB SAS HDD?

  If possible there will be any problems that arise?

  Hello Wee Jin,

  No, you cannot simply add the hard drive from the shelf in a judgment.  The EQL table requires only the readers of Dell.  They have firmware on them.   Also, you need to match the rpm speed as well. You cannot mix speeds in the same Member.

  Kind regards

  Don

• AIO HP 6000 Pro: hard drive HP 6000 AIO Upgrade questions

  I have a HP 6000 Pro AIO, which works fine, but I would like to put a hard drive more in for right now, I have a 250 GB drive.  I have a WD Black 1 TB disk into the machine, but it will not recognize the drive even after that the drive is cloned.  He tells me that readers may not be found.  When I check the disc, it displays the data that I cloned it.  Is their missing something I'm trying to migrate to the new drive?  Also, I tried to do a fresh install of the operating system.

  Hello:

  Your PC can suffer from this problem if you installed a hard drive sata III...

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3718645 & docid = emr_na-c02711513 & lang = to & CC = US

  I had a similar problem with my dc7800 CMT.

  I bought a WD Caviar Black 1 TB SATA III hard drive.  I managed to install the operating system, but when I want to start or restart the PC, most of the time (95%), I got the boot drive not found error.

  I assumed the reader was bad, so I RMA. by it, and the spare drive did the same thing.

  I have a HP 8200 CMT of Elite, which came with a Seagate 1 TB SATA III hard drive.

  For fun, I put this in my dc7800, and it worked very well.  He worked in this machine for over 3 years now without a hitch.

  I put the WD hard drive in my 8200 Elite and it has worked well in this PC, because there a sata III drive controller.

  None of our PC are shown in this document support, but the symptoms are the same.

• Work 6 GB/s hard drive IDE oucederomsurlesecondport 3 Gbit/s of the motherboard?

  Hi-
  
  I have HP Compaq DC7700 Convertible Minitowers desktop for home use.
  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?sp4ts.Oid=3232028 & SPF...
  
  I would like to repalce the HDD (Seagate 160 GB, SATA 3 GB/s) as its problems donations.
  
  (1) do you think that any disk SSD will work with the above motherboard?
  
  (2) if not, SATA 6 GB/s Hard drive with 3 GB/s port of the motherboard above?
  
  (3) these discs hard SATA2 and SATA3 having the same type of power outlet?

  Hello:

  You may encounter a problem if you are installing a drive not HP SATA III any like I did with my dc7800.

  My PC has the first question appears on the document of support on the link below (even if the dc7800 was not among the list of the PCs).

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken & javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c02711513-3%257CdocLocale%253D%257CcalledBy%253D & javax.portlet.tpst = ba847bafb2a2d782fcbb0710b053ce01 & sp4ts.oid = 3718645 & ac.admitted = 1379354458533.876444892.199480143

  I had bought a HDD WD Caviar Black 500 GB SATA III and every time I want to reboot the PC or several times in a cold, start I'd get a disc hard not found error.

  Of course, I assumed it was a defective and returned for a replacement disc.  The spare drive did the same thing.

  I have a HP 8200 Elite CMT with a Seagate 1 TB SATA III hard drive.  I put this drive in my dc7800 and it worked perfectly for the last two years, who confirmed to me that the support document affects more than the models listed.

  My recommendation for you would be to get the equivalent Seagate HDD which was in my Elite 8200, which is this one or stick with a SATA II if you can find one.

  http://www.Amazon.com/DP/B004IZN3YI/?tag=mh0b-20 & hvadid = 2478383168 & ref = pd_sl_8m29k5ycix_e

• Satellite A100-233 and 500 GB HARD drive

  HI, I need help. I have the Satellite A100-233 and seagate 500 GB 2.5 "HARD drive.
  I can install this HARD drive on my laptop?

  Put it inside and do a test. Why wait for an answer when you can find it on its own.
  It will be fine if yo9u may inform this community if it works well or not.
  This information is always welcome.