My cell phone does not have to be connected to the USB port

Similar Questions

• SAT L500D does not have to be connected to the power supply until the reboot

  Hi all

  I have a L500D, purchased locally and I have a problem that seems to escape correction by the helpdesk of Toshiba. My laptop while operating on battery comes with messages expected that the battery has x % remaining and suggests I plug the laptop into the power supply. I connect the laptop on the adapter and the power of the taskbar icon indicates the adapter is plugged in but it also shows that it does not load (adapter also remains cold, indicating no power is being developed). Low battery messages continue until the laptop stops ultimately. On commissioning again the laptop acknowledges that she attached to the adapter sector and charges upward.

  Helpdesk from Toshiba said a new BIOS version had been released and that I should update the BIOS and would probably "fix the problem". Went to the Australian Site and there is no other choice to see downloads for this model L500D [product number], helpdesk then took me on the European site where I updated the BIOS, then spent several hours on the phone with Symantec trying to uninstall and reinstall Norton 360, which ceased its activities and could not be uninstalled leaving my laptop not protected.

  Someone at - it an idea of what is the cause and how it might be remedied? Appreciate your thoughts.

  Hello

  If you have updated the BIOS and the help of t n right?
  Hmm I think that this problem of card mother s that looks like the adapter does not work correctly because everything is ok after new reboot
  I think the laptop is under warranty and you should get in touch with a local ASP to discover exactly what s wrong

  But I think that it s motherboard related question

• I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  Probably there is debris and dust in the decision-making of the lightning.  Serve with compressed gas canned (NEVER orally).  If this doesn't help, try electronic contact cleaner has a q - Tip.  Finally, take it to Apple.

• Where to find a version of service pack 1 xp this need does not have an internet connection to install?

  service pack 1 xp

  Where to find a version of service pack 1 xp this need does not have an internet connection to install?

  The only version I know is the "broken" here:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=19751
  As is the case, assume that you can't get it.
  Why do you think you need? Were you running just a Clean Install? Or you are planning to do this? (And if so, why? It is VERY rarely necessary!)

• My laptop does not recognize that anything that is connected to the USB ports

  Help, please. My laptop does not recognize that anything that is connected to the USB ports.

  Moved from feedback

  Original title: problems with USB ports

  Hi Alba.

  1. who is the operating system installed on the computer?

  2. What is the brand and model of the computer?

  This issue may be caused if one of the following situations arises:

  • The currently loaded USB driver has become corrupt or unstable
  • Your PC requires an update for problems that could conflict with an external hard drive USB and Windows
  • Windows may be missing other problems hardware or software updates
  • Your USB controllers may have become corrupt or unstable
  • External drive can enter selective suspend
  • Your PC motherboard may need updated drivers

  I suggest to connect the USB device to a different USB port and check.

  You can run the Fixit provided in the article and the Coachman.

  Reference:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems

  You can also try the steps in the link and check if it helps:

  Reference:

  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Note: Apply to Windows 7 as well

  Hope this information helps. Response with status so that we can help you.

• Is it possible to access the Microsoft Money 2005 file, if it does not accept your correct connection on the credential?

  Original title: Microsoft Money 2005 file logon.

  Is it possible to have access to your Money 2005 file if if does not accept your correct connection on the credential?

  Hi ChaserUP,

  Have you made changes on thecomputer before this problem?

  (a) If you use Windows Live ID, you can follow this link & check if the problem persists.

  Errors that you receive when you try to open Money by using your Windows Live ID credentials

  (b) if the problem persists, I recommend you contact Microsoft Money support for assistance.

  Hope the helps of information.
  Please post back and we do know.

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Disconnect all USB storage.

  Run this tool by do right click and choose 'run as administrator '.

  Of course, all first extract it:

  http://www.Uwe-Sieber.de/files/drivecleanup.zip

  If your XP is 32 bits, use the Win32 folder.

  Reset.

  If you still can't find the drive, assign it a drive letter in disk management.

• Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.

  Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.  Tried unplugging, reboot & reconnect, in different orders, but the computer does not recognize there is.  Tried to install a European website for Canon driver: Scangear CS, 8000fvst8120a_xpen.exe, which is advertised as compatible with Windows 7.   But the installer does not work.

  Windows 7 Professional 32 bit.

  Hello Graboots,

  Thank you for your message.  You can plug your printer on another computer, in order to exclude the possibility that the problem lies in the printer?  You can try using a different cable, for this rule as well.  Since it is a question of recognition, we remove the external devices before software troubleshooting.  Do you get anything when you plug the printer (ie. a tinkle of connection)?  Please let us know, we are looking forward to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My iPad Apple 3rd generation wifi + his cell phone does not work

  MY 3rd generation Apple iPad, wifi + cell

  model number MD408LL/a

  Serial number DM * VGL

  THE SOUND DOES NOT WORK

  < personal information under the direction of the host >

  All sounds, or simply notification and sounds apps (for example do music and videos app still have sound)? If notifications and apps you have notifications on mute: on the iPad side switch - Apple Support ? If the sounds in all applications which have tried for example soft-reset/reboot of the iPad, insert/remove the headphones?

• This computer does not have an enough space to the temperory files: error Code 0 x 80004005: upgrade of Vista

  Hello

  I am trying to upgrade to Vista home premium, Vista ultimate, but get the error continues on the execution of the installation program. Here is the error msg:

  This computer does not have a sufficient space for temporary files. Windows installation needs at least 445 MB of space on any partition for temporary files

  Error code: 0 x 800004005

  I want to just point out that I have 4 partition and each partition have at least 5 GB of free space on the disk with one of them having 35 GB of free space.

  Would be grateful if someone can help me solve this problem

  Concerning

  Vik

  Hello Vik.in,

  If you upgrade your Windows Vista,

  1. Open Control Panel by clicking the Start button, and then click Control Panel.
  2. Click on system and security.
  3. Click on Administrative Tools.
  4. Double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  5. In the navigation pane, click on disk management under storage.
  6. Select the volume that contains the existing installation of Windows Vista. In general, it is the C drive.
  7. Right-click on the volume and select Mark Partition as Active.
  8. Click Yes to confirm the action

     Note At this point, the existing Windows installation will not be able to start until the remaining steps are complete.

  9. Close computer management.
  10. Insert the Windows Vista DVD.
  11. Restart the computer.
  12. Use the Windows Vista DVD to start the computer.
  13. Choose the desired language and keyboard settings and then click Next.
  14. Click repair your computer at the bottom left of the screen.
  15. When you are prompted to repar startup data, click repair and restart.
  16. After the computer restarts, repeat steps 12 through 14.
  17. If your computer has only one installation of Windows, click Next. Otherwise, choose the correct installation of WIndows, and then click Next.
  18. Click on the link of the Startup Repair tool .
  19. Click Finish once the repair is complete. The computer should reboot to Windows Vista.
  20. Start the upgrade using the Windows Vista DVD

  Here is a link to the article that talks about it:

  http://support.Microsoft.com/kb/928232

  Hope it would work, answer back if it does not work.

  See you soon
  Syed Irfan

• Will be CC work offline, if the PC does not have an internet connection?

  My photo club uses a laptop to demonstrate techniques using Photoshop and other photo editing packages - in this case once a month.
  The laptop is used in a place without an internet connection.
  It is sometimes taken off-site in order to connect to the internet and run updates/maintenance.

  So we bought the program of photography, with the monthly payment, what would happen if the laptop was not connected to the internet for more than 99 days? Apps would go?

  Since the demos take place every month, I suspect that we could operate for 3 months and then on the 4th month not to be able to run.

  If we connected to a mobile phone, the applications would be able to login and update their status quickly?  or is it a large number of data transfer?

  Hi Phil,

  Applications will not run if the subscription is not activated after 99 days, activation also requires no heavy data transfer and internet connection via a mobile phone does not work.

  -Pierre

• D30 does not start after adding drives to the UCS ports

  Hi all

  I have a Lenovo D30 workstation.

  I have my SSD on sata RED ports, and port orange is the DVD unit. So far so good.

  I added 4 drives, connected to the blue sata ports (reader1 4) while the system worked. I launched rest Intel and created a RAID5 volume. All work of until reboot. At the power, I'm looking to a flashing cursor, just after the message 'press enter to...'. In the BIOS I have excluded from the disk 1 to 5 ports such as boot (on 3 different from the menu) device.

  If I take the readers the system starts. After you add the I have to go back to the RAID and also workt fine. But I don't want to recreate the RAID unit after each reboot.

  I made a rookie mistake?

  Hello

  Type: 4354

  The machine is in UEFI

  The option does not appear in the BIOS post screen, however, if you press CTRL-I during post, then the rest option appears. It shows the right RAID config and all 4 disks are visible.

  Discs: 4 x HGST 7K 1000

  Note: This is the drives 2.5 ". I use a 4 Bay of Startech unit to mount in a 5.25 Bay in the system.

  http://www.StarTech.com/nl/en/HDD/mobile-racks/4-drive-25in-removable-SAS-SATA-mobile-rack-backplane...

  The bootdrive is a Samsung 850, 500GB connected to the SATA0 port.

  The system didn't need to start fron all the RAID, but only from the SSD.

  Edit: I deleted the RAID for the rest for the post. Created a RAID5 set and restarted the D30.

  Guess what... it starts as expected. The RAID5 volume present in the W10 and works very well.

  What is the difference in the creation of a whole in the rest menu during post and create one of in W10 RAID?

• HP Officejet Pro 8500 has 910 a, Vista 32-bit, does not connect via the usb port on my PC!

  I used to have it all in one connected to my pc, until I lived some printing problems, so I decided to uninstall it!  When I tried to reinstall, the pc will not connect it.  I tried different ports and have replaced the cable, have also downloaded the latest software and drivers all to nothing does not.  I can connect wireless to my laptop, but unfortunately is not a solution for my office because it is not wireless, so it must be connected via USB.  At my wit's end, please help me!

  Hello

  Can you try to insert a flash drive into one of the USB ports on the printer, to make sure she reads it?

  The printer port may be what gives you the question. In addition, you can try the USB printer connected to another PC?

  Let me know the results.

• Why computer does not sleep if something is supported on USB port?

  When I try to load things into the USB port of the computer sleeps so they do not charge fully.  Can I substitute this short to change the time to sleep when I want to load something?  I thought that the only charge would make the computer think it is busy and so no sleep...

  In the heart Control Panel, double click on your chosen power plan Power Options click on "Change plan settings," to "Turn off the display" and to "Put the computer to sleep" choose "Never" to "on battery" and "Plugged in", then click on the 'Save changes' button below. I hope I could help