My Civilization II does not work in Windows 7. It worked before on XP in both XP Pro and XP Home edition.

Similar Questions

• Civilization 4 does not work on windows 7, even in compatibility mode of ideas anyone?

  Civilization 4 does not work on windows 7, even in compatibility mode of ideas anyone?

  Hello

   
  1. what version of Windows 7, you use?
  2. is it a computer 32-bit or 64-bit?
  3. What is the exact error message that you receive in compatibility mode?
  4. What is the edition of the game civilization 4 on your computer? for example, civilization 4 colonization full, however,.
  5. who is the manufacturer of the game? 2 k games or Take-Two Interactive
  
  All editions of Civilization IV are compatible with 32-bit Windows 7 computer. See the link below:
  
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=civilization%20IV&OS=32-bit
   
  But, only limited editions of Civilization IV are compatible with Windows 7 64 bit computer
  
  Click on the link below:
  
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=civilization%20IV&OS=64-bit
   
  To work on this problem, follow these steps.
   
  Step 1:
   
  Try to install the latest patches or updates for the game on the manufacturer's Web site and check if it helps.
   
  Step 2:
   
  If this does not work, contact the game manufacturer for assistance.
   
  Hope this information is useful.

• Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Hey, if the problem has finally been fixed! I thought you would like to know the solution.

  Select Preferences - network - system - advanced - DNS network - click + symbol - Type 8.8.8.8 - Ok - apply.

  That's all. Works perfectly now. Very much appreciate your help, thank you.

• I look integrated in the block of the legend of slide show, a widget like "Accordion" for, with one click, or by the way with the mouse, open a new caption for each photo. I tried with 'Accordion' Muse, it does not work. I haven't tried to copy and paste,

  Issue.

  I look integrated in the block of the legend of slide show, a widget like "Accordion" for, with one click, or by the way with the mouse, open a new caption for each photo. I tried with 'Accordion' Muse, it does not work. I haven't tried to copy and paste, but no result. The widget disappear into the legend of block. disappear. Do you have a solution?

  Thank you

  Loïc

  Accordion Panel tabs should, with click and open the container.

  Please provide the url of the site where it does not, also if you can provide an example where we can see the exact action, then it would help us.

  Thank you

  Sanjit

• bluetooth mobile keyboard wedge does not work before the beginning of the window

  Hello Microsoft,

  I bought the mobile bluetooth keyboard dock recently.
  It works not in the BIOS and CMOS to move but to start the window, everything is ok.
  I use dougle bluetooth to connect this with my computer keyboard.
  I already activated the USB keyboard in the CMOS using old PS2 Keyboard. But it does not work.
  Please help me to use my keyboard before the beginning of the window.
  Respect,
  Arkar

  Hello

  Which machine or laptop you are using.,.
  some of the model require Bluetooth patch file to complete, that patch file will be given by the laptop or desktop vendor, please contact their tech support toll free number.check with Bluetooth mouse also

• My computer is stuck on the Welcome screen and the power button does not work. How can I activate it finish (and on)?

  My computer is a Windows XP laptop. It actually worked fine this morning, but now my power button does not work and the computer does not start correctly.

  Hello

  Its best to contact the manufacturer of the computer as it might be a hardware problem.

• My Dell Desk Top DVD Player does not work. Whenever I have insert the disc and click here to read... I get the message insert' disc Please "."

  What is the faulty drive, or the software that is missing

  Hello

  What happens if you close all programs and then insert the disc?

  -------------------------------------------------------------------------

  If you have problems with CD/DVD drive:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• CD/dvd drive does not work - it is recognized when the computer starts, and it is listed in the Device Manager?

  I am running Vista Home Premium on a laptop Compaq Presario F700. It is listed in the list of computers of readers, it is listed in Device Manager. The lites drive that the computer boots so I know it is detected. When you run itunes or media player the player does not open. When I push the drive button it will not open. It opens with a paperclip in the exit hole. It cannot read a CD or a DVD. None of the media players even recognize there is a disc in the drive. I tried to run fixit, but it would not drive either. I tried restoring from a previous backup, without change.

  Hello

  Check / settings (BIOS/CMOS) often F2 so watch the screen as it starts - place CD/DVD
  1st in the boot order (remember to put it at the time where the fact).

  Then put in a DVD to boot Windows and see if the driver works.

  If it doesn't then it's a hardware problem.

  =======================================

  If the drive has worked in the test above, that these can help:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Someone help me please!, IE8 and Flashplayer. I loaded the version beta of Flashplayer, they said, would be to make it work, but I keep getting invited to load Flash Player. It does not work. Can I go back to IE7 and load the regular Flashplayer and remov

  I am running Vista Home premium, IE8, the latest version and after what Adobe says since I have problems with Flash Player. According to them, is not compatible with IE8, so they came out with this beta. It does not work! I am always prompted to load Flash Player for windows! Can I go back to IE7 and delete the others and the version beta and regular old flashplayer? Please help, that's all what I do perform, even Facebook is messed up because it requires flashplayer. But it seems that Windows does not recognize the flash drive I have loaded in beta. Does anyone know where I come from? I can also be reached at * address email is removed from the privacy *.

  Thank you very much!

  http://support.Microsoft.com/kb/957700

  How to uninstall or remove Internet Explorer 8?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Try this:

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Uninstall Flash by using the uninstall program Flash Adobe link above.

  Flash is sometimes corrupted.

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  Reinstall Flash, after 1st unchecking / uncheck the toolbar Google download option there.

  All other questions: Contact Adobe.

  See you soon.

  Mick Murphy - Microsoft partner

• Safari does not work after update 9.3 on air iPad and iPhone6Plus

  Safari will not hurt after update 9.3 on the two air 6Plus and iPhone iPad.

  If you mean the links doesn't work does not correctly, Yes, it is a known problem for some with 9.3. Disabling Javascript using Safari, but sacrificing the functionality of javascript on the web browser.

  http://osxdaily.com/2016/03/25/Troubleshooting-iOS-9-3-update-problems/

  If your problem is different, you will need to provide more details.

• Remote Desktop does not work after trying to use it to connect outside my home network.

  original title: Trouble with Remote Desktop

  Remote Destop worked very well with my desktop (Win 7 Pro) laptop (Win7 home prem) and then I tried to configure RD off-grid and now even can't do within the home group.  Port 3389 is open, I checked. It also goes further than "Remote configuration connection" and then expires.

  Is there a way to reset by default? If not, what are the default settings in Advanced Options?

  Can't believe how difficult it is.

  Well, a test of telnet with success from the RDC client to a host DRC looks like this. An empty window telnet with a blinking cursor.

  http://CID-25ab668da65c8fbe.photos.live.com/self.aspx/Windows%20images/RDCSuccessfulTelnetTest.PNG

  A fruitless of telnet test looks like this. You get a can't connect message.

  http://CID-25ab668da65c8fbe.photos.live.com/self.aspx/Windows%20images/RDCUnsuccessfulTelnetTest.PNG

  Based on the fact that PortQryUI reports that the DRC host is listening on TCP Port 3389, it seems to me that something on this machine is blocking incoming RDC connections if I read your log file.

  You have run PortQryUI on the RDC client on your local network? Which will probably appear the same as the telnet test. Here is an example of a successful test of a DRC DRC host test client.

  http://CID-25ab668da65c8fbe.photos.live.com/self.aspx/Windows%20images/PortQryUI-RDCclientExample.PNG

  You run any third-party anti-virus/malware software?

  You run a VPN client as a customer of Cisco for example? I've seen reports in the past of the clients VPN Cisco blocks requests from the DRC.

  FWIW, you can take screenshots with Windows 7 built-in Snipping Tool and then publish them on SkyDrive and post links on the screenshots. Its easier than trying to browse a lot of ascii text... MY HUMBLE OPINION...

• HP Scan does not work after last update Mac with the Mavericks and HP software was last updated

  Hi, I have a printer D110a and I recently installed Mac OS X Mavericks. After you have installed the Mavericks, I gave my Mac a printer HP Software Update. Now, when I go to the HP scanning application, I get a message that reads: is missing or damaged software one or more components required by HP Scan is missing or damaged. Please reinstall the software for your HP device. What should I do?

  Hi groberts619,

  Unfortunately the software, you get the update of the printer software does not include the application of scanning HP - only print and scan drivers.  I just checked out your product and it does not appear that he has plans to release a scanning HP Installer updated for this model.

  On the Mavericks seems, your best option will be to use the Apple's Image Capture scanning application.  You will find this application in the folder/Applications.  You also have the ability to scan using the preview.  Look in the file menu to make the command import from a scanner.

• GPU does not work on EL Capitan - filling of Premiere Pro CS6

  Graphic driver on EL Capitan is not as powerful as the previous OS Yosemite. Premiere Pro CS6 used to work flawlessly on Yosemite. He hangs up and creates a delay in action by the user in Premiere Pro under EL Capitan. When scrolling in timeline, the timeline bar continues to operate in a random direction and is not accurate for where is the mouse. Kindly communicated respective updates to fix this bug.

  Bertrand says:

  Graphic driver on EL Capitan is not as powerful as the previous OS Yosemite. Premiere Pro CS6 used to work flawlessly on Yosemite. He hangs up and creates a delay in action by the user in Premiere Pro under EL Capitan. When scrolling in timeline, the timeline bar continues to operate in a random direction and is not accurate for where is the mouse. Kindly communicated respective updates to fix this bug.

  This is a user forum, you talk to other users like you, no Apple or the manufacturer of your GPU - which is, moreover, you neglected to specify in your message.

  When you post should give specific information - in this case, your mac model, and especially what GPU it uses.

  Some Macs have discreet GPU NVIDIA or AMD, some only the integrated Intel GPU.

  If your GPU is you can go to their site and update the driver of NVIDIA CUDA. Who can help, because, as far as I KNOW, first would take advantage of CUDA.

  You can find out what GPU your mac uses ranging from the Apple, choosing about this Mac menu and then clicking on "views".

  Here's what it shows in my mac:

  

• Civilization 4 does not work on Windows 7

  I am unable to get Civilization 4 running on Windows 7.

  First, he said: "the program has compatibility issues.

  When I click on "Check for solutions online" he said "no solution found for Civilization 4.

  I then tried clicking on "Run program" which then the Civilization IV and "Loading" screen... "followed by a Windows message saying"Civilization of Meier 4 stopped working.

  What should I do?

  Thank you!!!

  Hi NHAlex,

  Try running in compatibility mode IV civilizations.
  right click on the CC icon, choose 'Properties', select the "compatibility" tab, check "run this program in compatibility mode for", choose windows XP or Windows Vista in the list and click OK.

  I hope this helps.

• I got updates for windows vista, but now my microsoft Word 2007 does not work. It ask for a product key and I put one of the dvd case, but he said that is not correct, I use program can someone help with this problem.

  product key no longer works on my office 2007 business what could be the problem?

  Hi Cincmj,

  Welcome to the Microsoft Answers Community Forum site!

  The question you have posted is related to Microsoft Word and would be better suited to the community of the Office Applications.

  Please visit the link below to find a community that will support what ask you:
  Discussions in Desktop Applications
  http://www.microsoft.com/office/community/en-us/FlyoutOverview.mspx , that allows to solve your problem!

  I hope this helps!

  Thank you best regards &,.
  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think