3G modem is suspended in the Portege R830

Similar Questions

• Intel 82579LM NIC on the Portege R830 does "Promiscuous" mode?

  Hello

  I have a laptop (Portege R830) work, who does not want to sniff the packets. I connected to a hub Netgear DS104-, as well as an older laptop and then uplink to ADSL.

  Run a continuous ping the default gateway and Wireshark on the devices and the other computer can see the pings from Toshiba, but not vice versa.

  The Toshiba runs under an administrator account has disabled Windows Firewall and my disabled Symantec endpoint encryption. I don't have any other AV to my knowledge.

  Does anyone have ideas of services I should turn on or off, or the knowledge of the characteristics of this NETWORK adapter?

  According to the Intel site "Yes, all cards Intel® PRO/100 Intel® PRO/1000, Intel® Gigabit, Intel® PRO/10 Gigabit and 10 Gigabit from Intel® currently on the market support"Promiscuous"mode." But Intel® 82579 Gigabit Ethernet Controller is not in the list that follows http://www.Intel.com/support/Network/SB/CS-004185.htm?wapkw=%28promiscuous%29

  Thanks for your time.

  Usually the firewall or security software Internet blocks pings so maybe try to uninstall Symantec completely. Disable it just cannot turn off everything.

  Another thing to try, is to use a static IP instead of DHCP. Disable IPv6 or install a new LAN driver from the Intel Web site may also help.

• Portege R830-10v / i7 / change internal SSD 225 GB

  Hello

  I need to change my flash drive SSD internal 225 GB for a 512 GB SSD!

  What should I do to the hardware and software level?
  Can I take any SSD?

  Thanks for the help?

  Best regards, Florence

  The HDD or SSD drive update requires no special modifications in the software or hardware.
  You need a compatible player SATA SSD 2.5.

  Here is a nice and very useful document how to upgrade / replace the Portege R830 & Satellite R830 series SSD or HARD disk drive.

  http://APS2.toshiba-tro.de/KB0/CRU18037E0000R01.htm

  Of course, after this upgrade, you'll need to install the system new the best choice would be its use or recovery disk and recover the laptop to factory settings.

• Portege R830 - Toshiba DVD Player missing

  Drive DVD - Portege R830 (03N00701)

  I can find no trace of the software Toshiba Video Player or Toshiba DVD player. My dealer told me simply that "they probably don't put more ' and told me to use Windows Media Player. Still the .pdf manual has clear instructions to use it.

  I'm supposed to have a Toshiba DVD player on board and if not, what can I download online?

  G Hey Lauri

  According to the specification for the Portege R830 series you should have The Toshiba DVD Player software.
  However you can download it here,

  [http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK]

  I have not used because I used to use a freeware prog. called VLC because it plays one of these video file formats that I tried on it.

  I have Satellite R830-143 and relatively speaking, it has the same specifications as the Portege and had the DVD player when I bought it a month ago.

  Seems dealers will tell you anything without even bothering to check.

  Best wishes

• Portege R830-138 wireless card

  Hello

  Nobody knows what the wifi card in the Portege R830-138?

  I am trying to install the driver after a wipe and a clean install of Windows and can't determine if its Intel, Broadcom or Atheros Variant.

  Thank you

  Hello

  "I think that the laptop supports Intel 802.11(a/g/n wireless network card).
  But you can check yourself by using this statement:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  Welcome them

• Need to check the update of the BIOS Portege R830 without Intel TXT

  Hello Forum,

  I have exactly the same problem as described here 2 years ago:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65519

  I need to update my BIOS, but I can't because the update of the BIOS told me that the Intel TXT is enabled.
  Unfortunately I can not disable it in my bios. Its just not selectable. The 'cursor' jumping just above him.
  I can only 'hide' which does not help.
  I have the same thing for the VT - x and VT - d setting in the BIOS. Is not selectable or editable as well.

  TPM is not active if...
  I installed after infineon and he tells me I need to enable the TPM in the bios to use. :-(

  I have a very old Bios Version 3.1 and I read in the changelog that there are a lot of TPM in v 3.4 and 3.5 related changes...

  In any case...
  A P007Dv360A_EC77V140.zip file has been transferred to 2shared.com who fixed it at the time, a user named Paolo30.
  Unfortunately, that this file has been deleted on 2shared.com

  can someone please provide this file (or an update of the bios later) which resolves this issue?
  Thanks in advance.

  Portégé R830 - 10 p belongs to the series of PT321 if you need the BIOS for Portege R830 PT321

  You can download older versions of pages driver Toshiba BIOS.
  For example: http://www.toshiba-asia.com/sg/support/drivers

  On this page of Toshiba Asia I could find all the BIOS for this Portege model.

• Portege R830/PT321E: update the Bios stops with "year error occurred while...» »

  Portege R830/PT321E: update Bios end with ' year error occurred while preparing the environment of update...» »

  Following message appears first

  BIOS version: Worm. current 3.40-> update version 3.70
  THIS Version: worm. current 1.30-> update version 1.50
  BIOS and THIS should be updated

  During BIOS update seems following message:

  + An error occurred during the preparation of the updated environment. You have not given permission to run the update. +

  My settings:
  -BitLocker is turned off.
  -No connection to a docking station
  -Windows 7 is installed
  -Boot mode is enabled? I guess that means:
  "Close all open programs, shut down windows and then turns off your computer."

  Any idea what is the problem?

  Post edited by: ML

  Hi ML

  Stupid question maybe now but why do you want to update the BIOS on this, I think, fairly new laptop model?
  Have you noticed a few issues or hardware issues?

• Portege R830 had dead blue when the screen connects to wifi or shared internet

  It seemed began as soon as the automatic update from Microsoft on Qualcomm, Atheros, every time when connect to any WIFi, share internet, my portege R830 shows blue screen and the following error message:
  unhandled system_thread_exception (athwb.sys)

  I found that I am not the isolated on the Web site. I tried to remove and stop updates. However, once I connect to the internet, the blue screen comes back.

  Is the problem because of the network adapter? The model is Qualcomm Atheros AR9002WB
  Can solve the problem if I download the new driver of Qualcomm-Atheros site? Or if I replace a new adapter?

  The athwb.sys file belongs to the Atheros wireless driver. Usually placed in C:\Windows\System32\drivers\athwb.sys
  It seems that in your case this file causing the BSOD.

  I found a very interesting detail about this problem and why it seems.

  A user wrote:
  {quote} The issue is due to a database hosted on Linux kernel mapped NAS drives and if the Client for NFS is installed on the windows machine. For some reason, this configuration does not work. If you mount your shares and NFS is installed it tries to use the NFS client and fails miserably. Trick is to disassemble all the shares of logging in Safe Mode and then rebooted and uninstall the NFS client and then mount your shares. {quote}

• Port Replicator to the United Kingdom will work with US Portege R830?

  A Port Replicator to speed in United Kingdom Hi (PA3838D-1PRP) will be compatible with the laptop Portege R830 American version?

  I guess you're meaning that this port replicator
  http://www.Toshiba.co.UK/discontinued-products/pa3838d-1PRP/

  It is mentioned that this Port Replicator is compatible with Portege R700 and Portege R830 series.
  European, along with Americans and Australians are very similar to each other so the port replicator, must be compatible.

  But I guess you need an AC wall adapter for plugging the European system in the United States

• Re: Portege R830 - cannot find my model on the list of Product Support

  Hello world

  I recently bought a Portege R830 and was trying to find support for my model page.

  However, on the list of Product Support, where you choose the model, I can't find which is mine.

  My model is displayed as * R830-1056UB * in the box your laptop came and he just say * Portégé R830 * on the underside of the laptop.

  There are several entries for R830 on product support list, but * R830-1056UB * is not one of them.

  * Any ideas how I can decide which one is mine? * (I'm worried about download bad software/drivers for my laptop)

  I'm not in a country with a support phone number and it seems Toshiba support do not have a contact e-mail, so I was not able to contact Toshiba directly for help.

  Thanks in advance for your time and help!

  RG

  Hello

  I put t know that Toshiba support page that you have controlled, but if this laptop is designed for the Asian market, you should find it on the support Toshiba Asia page.

  In which country did you buy?

• Re: Portege R830 eSATA - failure to mount the external hard drive

  {color: #000000} I have a new Portege R830 with combined eSATA / USB port. It will recognize an external drive in as drive 0 Device Manager but does not mount the drive under Win 7 x 64. The road rises and works absolutely normally under USB2 via the combined port or one of the other ports on the PC. The player works absolutely normally under eSATA on another desktop PC Win 7 x 64

  Search Internet suggests that this is a widespread problem with Win 7, but given the above commentary to normal operation on my desk, strongly indicates that it is "simply" a laptop Toshiba driver problem Win 7 x 64.

  A workaround solution that someone had reported was to boot the PC with the drive connected. This will lead to the PC mount the drive, but I found to be unreliable - tends to freeze the unpredictable machine, but when logged in it showed he was transferring data at a reasonable speed.

  The search for these forums, no solution has not identified... Toshiba - think you should answer it please!

  Afetr all is a 'feature' significant on the Portege and rather defeats the point if it is impossible to use...

  Kind regards

  Kevin {color}

  Hi mate

  First of all, it is a forum for a user to this don t address issues from Toshiba here in the forum, but other users of this community.

  Back to your question; Does this mean that the HARD drive connected to the eSATA port cannot be recognized as device eSATA but USB device?

  Please check if you are using the latest version of the BIOS. On the European driver Toshiba page, you can find the BIOS version transferred to 29/07/11.
  In addition, I recommend to check the BIOS settings; check if eSATA is activated it.

• Portege R830-138 - does not connect to the SharePoint Site: 401.1 error

  Recently bought a Portege R830-138, but I am getting it to connect to our Service businesses - SharePoint Site I receive a "error HTTP 401.1 - Unauthorized: access denied due to credentials not valid." message.
  The laptop has a full internet access and we have access to the server that is running the SharePoint site by using the same credentials via Remote Desktop. Can also connect to SharePoint site of any another machine using the same credentials.
  Services SharePoint runs on a server with OS - Windows Server 2003 Standard Edition with SP2

  The IT support checked this knowledge of MS doc?:
  + You get a "error HTTP 401.1 - Unauthorized: access denied due to credentials not valid" error message when you try to access a Web site that is part of an IIS 6.0 application pool +.
  http://support.Microsoft.com/kb/871179

• Portege R830 - problems of 3G connection after installing Win 7 32 bit

  Hello

  I went down a Portege R830 Windows 7 64 bit for Windows 7 32 bit with drivers of Toshiba. I put a SIM from my provider.
  In the windows Network Manager, 7 and in the Toshiba Wireless Manager I can see the right provider and HSPA network but when I start the connection, it does not (I don't have a PIN code).

  It is failed with Windows 7 Network Manager and Manager Toshiba wireless (I don't have this problem with the Portege R700 windows 7 32bits)

  But I found a small solution (but I think that's not enough):
  I have created a dial-up connection, with a number * 99 #,.
  I started the connection, it does not happen, but after that, when I raise my first connection is good.

  I don't know why, it's as if the modem is in sleep and the dial-up connection wake-up the modem, because after all is good (win7 Network Manager, Manager wireless Toshiba) so if I reboot the Portege.

  I want to avoid the dial-up connection on my r700 portege with 32-bit windows 7

  Thanks for your help and sorry for my English.
  support for the toshiba told me to reinstall windows 7 64 bit to solve the problem :)

  Hello

  Are you sure that you have correctly configured the connection?
  Here is a nice FAQ that explains step by step how to connect 3G using the Toshiba Wireless Manager:

  + How to configure and set up a 3G connection via the preinstalled Toshiba Wireless Manager +.
  http://APS2.toshiba-tro.de/KB0/FAQ1A037W0000R01.htm

  and here you can find instruction how to create dial upward of connection using own configuration of Windows.

  + How to create a Dial-Up connection with 3 +.
  http://APS2.toshiba-tro.de/KB0/HTD9802OF0000R01.htm

  Recommend check them both!

• Portege R830-10R: No. USB connection after recovery from sleep mode

  Nice day!

  I have experienced the problem depending on my Portege R830-10R for a long time.

  Quite often, when he recovers as soon as "sleep" mode it loses the ability to recognize USB devices and built-in 3G modem does not work as well.

  After awhile, like 10-15 minutes of work (or), the problem is solved by itself, but normally, it is not the case.

  If I try to send the laptop to Hibernate or "standby mode" again, while this problem is active, allows to say, it not put into hibernation and crashes on a midway with a black screen - so I have to stop it manually, and then start again.

  Normally, the only way to solve the problem is to restart, but the issue comes after the next "standby".

  Someone has something like this? Any solution available?

  Hello

  > Quite frequently, when he recovers as soon as "sleep" mode it loses the ability to recognize USB devices and built-in 3G modem does not work as well.

  Have you noticed this behavior from the first day of purchase?

  Only special USB devices assigned as USB flash memory stick or USB HDD or are
  other devices such as the USB mouse or USB keyboard has also affected?

• Portege R830 - Download Cant PT321E value added package driver.

  Hello!
  I can't download the toshiba.eu/support/drivers/laptops/ driver for

  Toshiba Portege R830 - PT321E
  Windows 7 64 bit
  Location - Latvia

  Download keeps failing sometimes to 10% to 50% complete.

  Sometimes the page is inaccessible. Tried to download the driver of different networks.

  Thank you.

  Today, I tried again to download the driver package. Downloaded without any problem.
  Wasn't the best place where to post about him, but I couldn't find it on the page where I can report problem Web page technique.