My Clip + boots then immediately farewell and closes

Similar Questions

• What to do when an application loads, and then immediately closes?

  I use Muse CC 20141. It worked fine a few days ago. When I launched this morning preferences seem to be scrambled: the scope of the application has been activated (I never do that) and the panels on the right had a weird configuration that I've ever done. As I straighten my signs the program quit abruptly. Now immediately, it closes as soon as it is launched. On OSX.9.5, I fixed disk utility permissions and restarted the computer. The problem persisted. Then, I uninstalled and reinstalled Muse, but the problem remains. None of my other apps CC have been affected.

  Any suggestions to fix this?

  Akshay,

  The problem is finally solved. I tried Adobe cat without success, but phone support finally reached. As I suspected, it was a corrupt preference.

  In case someone else has the same problem, here is the solution step by step on a Mac system.

  In the finder, type cmd/SHIFT-G

  Go to the folder ~/Library

  In preferences, delete the Adobe Muse CC folder, then empty the trash.

  Restart Muse. It finally works!

  Julie

• I installed G10-ebook but when open it and write down the username and password it starts and stops immediately and closes what should I do?

  I installed G10-ebook but when open it and write down the username and password it starts and stops immediately and closes what should I do?

  Hello

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Sims House Party, the installation program starts, then immediately closes, gives me the error "0 x 80040707 - call function DLL crashed: SORTS." PathGetSpecialFolder.

  original title: error number: 0 x 80040707
  When I try to install the Sims House Party, the installer launches and then immediately closes, gives me the error "0 x 80040707 - call function DLL crashed: SORTS." PathGetSpecialFolder.

  According to the compatility of Windows 7, the House Party is compatible under 64-bit and 32-bit Windows 7. I tried to install it on another computer running Windows 7 32 bit and the error does not occur.

  I am running Windows 7 Professional 64 bit.

  Looks like that method 1 solved my problem.  Normally, I would get this message several times a day.  For more than 3 hours I applied the method 1, and the error has not appeared again.  Thank you very much.

• Get the debugging box when PC game opens and closes and then crashes

  Game crashing on Vista

  I open the program to play my PC game and I get an error of debugging and closing program on my screen, then it disappears and the game opens normally.  Then I get about 20 minutes in the game and it crash and send me on the desktop and the program closes itself.  I have DEP problems, but I think I solved those with the fix tool.  But why the fracas?

  Hello

  Don't forget to check with the Game Maker support and ask in their forums known issues
  as others have probably experienced similar problems.

  =====================================================================

  It is a fairly complete general performance convenience store that should help in the
  issue. Use the startup clean and other methods to see if you can identify the cause and/or
  eliminate the problem.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• Some program flashes automatically opens and closes immediately

  This program flashes - opens and closes automatically every three to five minutes which is really annoying:

  http://img132.imageshack.us/img132/164/flashlb.jpg
  Please note that Im not trying to open any program, it opens at random every few minutes.
  What is this program?
  How can I disable this opening automathic?
  Thank you

  At either the analysis of the find anything bad?

  1. As a test, if you start in safe mode with network, it continues to blink then?
  2. If you boot into normal windows and sitting mode to your desktop (IDLE - running nothing) is still flash upward?
  3. If it isn't, then open IE and let it run only on your home page - it flashes up then?
  4. If it sounds like a browser hijacking might be. Have a read through this - http://www.microsoft.com/en-gb/security/pc-security/browser-hijacking.aspx and see if it helps. NOTE: DO NOT worry about step 2 (MSE) IF you already have a bunch of AV updated running on your PC.

  
  

  Who will stop him?
  

  
  

• Skype says he has encountered a problem and closes immediately

  Skype says he has encountered a problem and closes immediately.  Windows is looking for the solution?  What should I do to get Skype to work?

  Original title: network programs network networking Internet Web site Site Web Web Site URL

  The following support Skype can help:

  http://support.Skype.com/en-us/FAQ/FA10634/how-can-I-completely-uninstall-and-then-reinstall-Skype

  http://support.Skype.com/en-us/FAQ/FA10382/why-does-Skype-crash-on-my-computer

  If those who do not help, Skype has its own forum that may be useful: http://community.skype.com/t5/English/ct-p/English?profile.language=en

• money more sunset "files needed to run the Planner missing or corrupted" then program encounters problem and closes. Downloaded multiple times on multiple computers

  money more sunset "files needed to run the Planner missing or corrupted" then program encounters problem and closes. Downloaded multiple times on multiple computers

  Hello

  I suggest you post the same question in Microsoft Technet forum for Microsoft Money Plus Sunset related issues. We have a dedicated team to help you with the problems of Microsoft Money Plus sunset.

  Microsoft Money:

  http://social.Microsoft.com/forums/is/category/money

  Hope this information is useful.

• Windows and programs open and close immediately by clicking on them

  Hello

  I have problems with my pc for 4 weeks...
  When I try to open a window, the program, it will be open, glisten and close immediately.
  He does it with everything, internet Explorer, Control Panel.

  -J' have a DELL studio PC
  -There are 4 months 'old.
  -J' tried reinstallin windows and every single program, with which it came
  but the problem is there
  -J' have windows vista home premium 64-bit edition

  Anyone know what causes this problem?

  Thank you
  Ana

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us

  If you encounter the same problem after reinstalling Vista, contact Dell as your computer isn't old 4 butterflies.

  You are under warranty Dell; make a claim.

  See you soon. Mick Murphy - Microsoft partner

• Computer reset unexpectedly and then immediately restarts again - id screen blue-inhabitants: 1033, Bccode: e1

  Original title: BSOD bccode E1

  Computer reset of unexpected and then immediately rebooted again.  Safe mode I would like access to this code.

  Event name: bluescreen

  OS version: 6.1.7601.2.1.0.768.3

  ID of inhabitants: 1033

  BCCode: e1

  Bcp1: FFFFF800031BEC00

  BCP2: 0000000000000002

  BCP3: FFFFFA8005676280

  BCP4:FFFFFA8005676280

  OS version: 6_1_7601

  Service pack: 1_0

  Product: 768_1

  What should I do now?

  Thank you

  BCC 116 and 117 are called video time out and recover and are associated with the video subsystem.  Most often related to a driver, but they can also be linked to the heat, overclocking and occasionally in powered power supplies.

  The user will often see "no has your video stopped and recovered", but ultimately it will not be able to recover.

  Details

  "Is not a real crash, in the sense that the blue screen was launched only because the combination of material and video driver video was insensitive . "

  The first step would be to install the most recent driver, (completely remove the current driver and installing the latest driver available),. and continues to malfunction, return to a much older pilot that some new drivers are somewhat bugs. If playing with video driver versions did not help, make sure that the box is not overheated.

  In the recent "Timeout detection and recovery' operating systems (TDR) of the video subsystem OS components were capable of making really impressive things to try to find issues that resulted in BONES as soon as XP crashing.

  As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.
  If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.
  
  If you have a desktop computer, try removing a side panel and a sector large fan directly to the motherboard and GPU.
  Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

  If so, it could be as simple as dust accumulation and inadequate cooling afterwards.

  I download cpu-z and gpu-z (both free) and keep an eye on the video time

  If this is not a driver and not heat it's time to start checking the hardware by running a GPU stress test

  Try this free video stress test: http://www.ozone3d.NET/benchmarks/fur/  
  FurMark Setup:

  -If you have more than one GPU, select Multi-GPU during installation
  -In the run, select "Test of stability" and "Journal of the GPU temperature.
  -Click on 'Go' to start the test
  -Run the test until the temperature of the GPU maxes - or until you start to have problems (whichever comes first)
  -Click on "Exit" to exit

• Win7 64 bit SP1 opens Control Panel then message pops up saying explore stopped working and closes

  I use the following system

  Windows 7 Edition home premium SP1
  Sony Vaio model SVE14A15FAS I guess that S is for money, I noticed that SVE14A15FA only in the site
  64 bit
  Performance of kaspersky internet security 2012 to protect the laptop
  I also run own utility CC v 3.25 to clean periodically the laptop
  With the exception of this problem laptop works OK
  I tried it looking for virus, uninstall all unnecessary programs, push back the point of restoration to the oldest point etc.,.
  The strange thing only I can find is a 5 Vaio.7.1.05100 update that shows in Add Remove program which does not uninstall and gives the error message
  After some research, I found that Java has updated so I've updated for Java 7 update 11 only today
  I also tried to disable java plugin in google and IE
  I also checked the Vaio support site and downloaded the latest 6.1.2.1.11220 update; has ran the different options under Vaio care etc. but no solution

  Hello

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description provided, you have problems with Explorer does not.

  Perform the steps from the link below and see if it helps.

  Error: Windows Explorer has stopped working

  Note 1 : when you perform the clean boot, then follow step 7 to reset the computer to start as usual after the boot process.

  Note 2: Make a backup of all your data on an external drive before you perform an upgrade in-place, as this could result in loss of data.

  Meet us if you encounter any problems with the Explorer or any Windows problem, and we would be happy to help you.

  Good day!

  Hope this information helps.

• My Lightroom is not opening. Not at all. Period. It acts like it's going to g then never does, and then I have to use the Task Manager to close. Any ideas?

  My Lightroom is not opening. Not at all. Period. It acts like it's going to g then never does, and then I have to use the Task Manager to close. Any ideas?

  Hi ellync,

  You must disable the graphic processor of Lightroom preferences, but since the opening of its not, you can either method below.

  Please follow the Solution below

  1. Go to edit > preference > Performance > uncheck "processor chart use" If this does not solves the problem then,
  2. With Lightroom closed
  • Access

  C:\Users\YourUserName\AppData\Roaming\Adobe\Lightroom\Preferences    (Where AppData is a system folder / hidden so you may need to enter the name of the folder directly into your browser's address bar or activate hidden folders / system in the Internet Explorer view folder options.)

  • Open the file LightroomPreferences.agprefs
  • Locate the line use = True autobahn (press CTRL + F)
  • Take Autobahn use = False

  
  

  After save the file

  Restart Lightroom

  3. also refer to that link and update GPU if you use AMD map

  Adobe Photoshop Lightroom Help | Problems with graphics cards 6 CC/Lightroom Lightroom and AMD | Win

  Let us know if this helps

  Concerning

  Mohit

• I'm looking for video clips that I can use to open and close my video with a third lower, y at - it a link to download these templates?

  I was looking for video clips on the theme, like a clip that opens and closes my video and with the lower thirds

  the lower third models are here, if that's what you're looking for?  Library, title, missing model projects templates: Premiere Pro, After Effects, yet

• I use Adobe Acrobat Pro XI (11.0.08) during execution of "save under" process "Reduced the size of the pdf file" Adobe for awhile then stops completely and needs to close. All started to do that today.

  I use Adobe Acrobat Pro XI (11.0.08) during execution of "save under" process "Reduced the size of the pdf file" Adobe for awhile then stops completely and needs to close. All started to do that today.

  As I had not heard of you, I tried to 'cut' of this folder and pasted into a folder, I called "temptemp" in the same root fodler lacation, (not in the original file). Run the program and it gave me the same error and closed again.  Any help now?

• The video is normal until I got down the clips in the sequence 01, and then they are severely cropped.

  The video is normal until I got down the clips in the sequence 01, and then they are severely cropped on all sides. Should what setting I be wrong?

  Hi Brenda44,

  Please, do a right-click on the item in the project Panel, and select new sequence Crter option to create a sequence according to your clips.

  Kind regards

  Vinay