My composition is being black?

Similar Questions

• IM new after effect and my composition screen is black and I can't see the video. Any ideas?

  I plug just after effect cs6 and I have installed it on my laptop but my composition screen is black and I'm not able to see the video. Here are the following info on my computer. resolution 1366 x 768, 60, graphoc memeory 1792 MB referesh rate. 1 TB hard drive, 12 GB of RAM

  Thank you

  Deban Tony wrote:

  resolution 1366 x 768,.

  The requirements for the CS6 (which can be found here: system requirements:) After Effects) specify a resolution of at least 1280 x 900 display

• Composition window is black

  Hello, I used after effects on a macbook air and when I try to play my images, the compose window is black with a little white box in the middle and the sound not playing the video. Thank you

  You are in the zoom of 1.5%.

  Mylenium

• Unique black frame

  Hello

  For some reason any, when I start the capture process, the structure of loop of producer/consumer below gives me the first image as being black (empty) with all following frames works very well. I don't know exactly why it does this. Any input would be greatly appreciated. Thus, the framework before it collects information about the exhibition or the gain of the camera and how many images is to grasp, should not really affect the capture process.

  Konstantine

  

  Konstantine salvation,

  The reason why you found it is a problem with the data flow, you put an element in the queue until the copy buffer image is completed. Try to combine all the sons of the error in the upper loop to enforce data streams.

• Change a picture n & B in black and a color?

  I have a black and white image and I want to change the image to look as if it printed on color paper. Basically I want the spectrum of the impression of being black and green (as example) instead of black and white. I can't do this by simply selecting white and replace the color of a layer due to shades of gray. So if a grey is black to 70 percent and 30 percent of whites, id want it to be then the colors black and 30% to 70%. Thoughts?

  

  If that's what you have in mind.

  Image > Mode > RGB color

  Mix the Lock background layer in the basket and insert a white layer underneath (symbol Cmd + new layer in the layers panel)

  Edit > fill and choose color and select a color, such as green

  Return the 0 image layer and change its blending mode to multiply

• Print from InDesign prints fine, but print after that exporting to PDF prints black as gray, low Image quality

  Hi all

  I have a printing problem going on with a document that I am currently trying to print.  When you export to PDF (high quality print or press quality setting, as well as to any possible color output) and then print, black my document go to the gray and the images look washed out.  This does not happen if I print directly from InDesign on my printer.  I tried to change the merger of transparent space, change the color profiles document and corresponding to export options to the options used when you print directly from ID, all without success. the document is always printed wrong when exporting to PDF first.  Any ideas why this might happen when exporting or printing to PDF, but not when you print directly from ID?  Thanks in advance for any help!

  I see.  Is there a way to ID artificially add CMY export in the same way as it does when sending to print?

  Is the destination of the document a composite digital printer or an offset press? If it is composite set your black preference for export fills and convert to RGB on export:

  

  

  In Acrobat, the two blacks will be 0. 0 | 0 RGB and will display the same

  

• Choice of hard drive? WD RE3 vs Black

  If I wanted a unique additional disk for video editing support and was not intending to RAID for awhile (maybe a long time), is there an advantage to the WD RE3 series on the black series when it runs as a single hard drive? I know the RE3 is best for the RAID, but is also better off alone? The 750 GB RE3 is $ 93 on Amazon, the black 750Go is on sale for $64 Newegg, both are free shipping. 32 MB of cache, etc. are both. As single player, being black lack of any feature or not as reliable I should spring for the RE3?

  Partly because of the four discs that have completely failed on me in all my years of computing, three were WDs.

  This shows just how different people have different experiences. Out of Seagates (version 1.5 to) 7 5 missed in two months. Apart from that, they are more hot and more noisy than to WD

  In addition, other sites that Tom the WD Black constantly surpasses Seagates. Remember, performance differences are small enough to be hardly noticeable in real life. I opted for the Samsung because of the price (with 16 disks, it makes a difference). RE is quite expensive in comparison to blacks, but with a limited number, which may be acceptable. Otherwise, I'd go for blacks for sale currently.

• Wearing the animated titles of EI to PP

  Hi all

  I have a few recorded interviews and took a sample video of one of them to create an animation that shows the name and the role they play in the subject. I need to customize each title for each person, of course, and I was wondering the best way to achieve this.

  Here are the effects after layers:

  Top of the PAGE title and role (fixed a custom for each clip title animation)

  2 animation brand band where title seat (even for each clip)

  3 clip video test (for positioning but should be replaced first by video editing)

  BACKGROUND image of animated background that plays during the title animation, and then disappears (even for each clip)

  I would like to customize each sequence of title for each actor. Because one of the layers is located below the video layer (but is mixed the video background being black) I need to be able to first as layers and reposition around the video clip.

  What is the most effective way to do this. I thought that as the background animation and animation of the title band are set, I could create a composition and another composition for the specific title and make each unique for each actor. I was wondering what is the best "workflow" to do this. I can sequels ignore the video clip of test to avoid it being exported. Should I delete or can I just say AE not to export, or to include in PP?

  Thanks for any help

  If it were my project, I would create a different model for each name by simply duplicating the comps in the project Panel, and then changing the name. I remove the background video, duplicate the comps, change the names, and then render each title using the mark to return or SOUL using the Lossless with Alpha preset. Securities made would be introduced in the body and added capture appropriate in the above sequence.

  If you have CC 2014 I would work differently. I would create a text in AE for Premiere Pro template. It is a much more efficient workflow. Here's how: How to create patterns of text in After Effects for Premiere Pro | Tutorials Adobe after effects CC

• Satellite Pro 6000 - horizontal line on top

  I have a problem with my toshiba Pro 6000 1.2 Ghz, since I installed the new bios or new drivers windows Toshiba video.

  In fact only 6000 has a screen of 15-inch (and not the 14-inch), and when I start it up I see everything, but with a horizontal line at the top of the screen (which change color, can be white with text mode, being black or blue under windows, etc.). The text screen is pressed by about 2 cm from the edge in text mode (during booting, for example.) Red logo Toshiba at the beginning).

  It seems that the Bios (or pilots, but I do not think because that's also how during startup) does not correctly handle screen 15 inch laptop computer. I installed the version 1.60 of the Bios. I don't remember the version I was using before.

  If I install a 14 inch screen, I don't have the line and I don't have the text squeezed by 2 cm from the top screen.

  According to me, but I'm not sure that the problem is not hardware, but more by a software problem (I hope).

  Thank you in advance.

  Jan

  I don't know if it will help, but in the BIOS, you will find an option called «stretch LCD Display»
  Try to disable or enable this setting

• Satellite P10 - problem with grafic card

  Hello

  At the start of my Satellite P10 - 554 today, the display shows not sorted pixel color around the screen. The message of the BIOS seems completely normal. After the start in graphic mode, from windows XP, the screen keeps being black.

  The hard drive works fine. I checked the display. It works very well.
  I guess that the graphics card (geforce go 5600) is damaged. Any chance of getting my phone fixed? Do I need a new mainboard, or is it possible to replace the graphics card? Where can I get the parts needed, used or unused? How the 'spare parts' cost? Better to buy a new laptop?

  Thanks a lot for your help.

  Steven from Germany, Duisburg.

  Hello

  > Any chance to make my phone fixed? Do I need a new main Board, or is it possible to replace the graphics card? Where can I get the parts needed, used or unused? How the 'spare parts' cost? Better to buy a new laptop?

  Are you sure that the graphics card is dead at 100%? This can be checked easily.
  You could connect the external monitor to the laptop and could check whether the same appears on the external monitor too. If the same failure would appear on the external monitor then the GPU could be really faulty.

  In this case the whole motherboard must be changed and such procedure costs a small fortune, because the motherboard is on expansive parts laptop. You should calculate 300-350 euros

  Then maybe a Council of second hand could be an alternative.

  Greetings

• How to clean on deskjet f4500 ink jet printers? two new pairs of cartridges = washed out colors. No manual.

  I replaced the cartridges in my HP Deskjet F4500 printer before they were empty, because the print quality was poor.  It got worse until there was no being black doesn't print at all, only pale colors. I tried another new pair of cartridges in which case it is the ink, but it's all the same.

  The assistance program HP on my computer tells me that I should clean the inkjet - to consult the manual that came with the printer.  I can't find. He lost.

  I'm lost!

  Waiting for legal document!

  Help, please.

  Hello BethWales

  You can find the user manual at the link below.

  DeskJet F4500 manual

  Also try the print quality article as well. It can help solve the problem.

• My acer liquid e3 screen won't turn on?

  I was on my phone and it has not been plugged, but had a full charge. Then the screen became black even if I had not pressed the lock button or anything. I pressed the lock button to redisplay my screen but it wouldn't come back on so I pressed again and she flashed my screen lock for a second before returning to the coast. Even when someone calls me, my screen flashes on a second and then go back to being black. I tried to power off, but it won't allow me because I can't access the screen. I restarted using the lock button and the volume button, but he made no difference at all. It charges fine and when I plug it into my laptop I can still transfer files between the two devices, my screen just lights and I can't access any application or text or do anything on my phone.

  I suspect a hardware failure, id, you are still under warranty, contact Acer support services, if not... you can not do much.

• Help before dialing

  Version: After Effects CS6 11.0.0.378

  OS: Windows 10 home

  If I had any questions before dialing these two layers.

  

  When I try to you need to precompose these two layers together, composition resulting is black and contains nothing.

  

  ^ Slip composition into a new

  

  ^ Composition that results is empty on the same image. Thank you!

  Drop the 'Guide' of all layers

  

• There is no video in the compostion but pre comp?

  Hey guys,.

  I'll try to keep it brief. I used after effects for a little over 7 weeks now. It's honestly an amazing program. But I recently encountered a problem which is makes me really desperate. You see, I have no video. After a change that I did all I get is a black screen. Now, I tried ctrl + z, but for some reason, he has not changed a thing. If I go to my demo how ever I have video. I tried to double click it, but unfortunately it just redirects me to the composition with the black screen.

  Your help is most appreciated!

  Looking to the left of a 3D scene view, so that you are viewing your edge-on 3D layers.

• Alienware 14 Fx lighting problems

  Hello, I do not know really what to put as the subject, so will have to do. However, I have problems with the lights of FX. It seems that, out of the blue, they decided to not work. The lights for the; Keyboard, mouse pad, power, Logo, button...

  The only time wherever they work is when I go to the command center and choose a new color. Then close the command center, he will ask "Do you want to save this new theme" or something. If I choose Yes, FX lights will appear for just a second and then go back off. And they stay?

  Now, I did some research and I did not see the problem, however, I tried unistalling the command center and put it back, and it didn't fix it. So I don't really know what it is. I ran something question detect the Dell page. But he said everything was fine. I also checked if it was one of my energy, and I have it on high performance. I went from balanced high performance, to test, but that solves nothing.

  The only thing I could think of, but I'm not sure that it would have something to do with it, I went from my driver intel NVIDIA recently, but I doubt that it would have something to do with it.

  Help, please? Thank you.

  Edit:
  If it is a question where can I get just to do a factory reset, I need a guide on how to back up and restore, simply because I don't want to lose any important work I have, etc.

  First of all, is to make a backup.    There are ways to do it without having to buy the upgrade of Alienware ReSpawn.    Might look at things like:

  Because I buy Seagate drives to make the back to the top on.  I use the free product provided by Seagate to get a clone of my hard drive.   We install the Seagate Wizard disk to a work computer, and it allows you to create a stand alone backup CD which will make clones and restore the operating system to the clone.

  If you have not done so, it is also the time to create Windows restore DVD and CD repair of Windows, which is available through Alienware Respawn or Windows itself.

  All having a back up is always a good idea.   I want to make more than a backup, if I'm going to fool around with the operating system that you are about to do.   I like to make sure that at least one of my backups is a Clone, I distrust so backups of call time interval, as they find unique and creative ways to fail.  Even if they are necessary when there are just trying to permanently keep a backup and not running out a huge amount of space external hard drive.

  Search to find all the Activation/registration codes for all software products you have and put them together in a USB key and maybe on paper as well.  It's amazing how these things get lost when I was sure that I already have them in exactly one place.  I know that if you have Microsoft Office, if you did not buy Microsoft themselves, that Dell needs a very good reason for you give the activation code again.   (He came on a piece of paper in the box with the computer originally).   Similarly, make sure you have the Windows registration number.      Maybe need a registration code for you Antivirus and other things you buy, such as games.

  Then I suggest that you save a copy of the registry, as it is right now.   And make a point of checking system.   I haven't looked, but I think that Alienware support has a few really good writeups on how to do these things that is far superior to what I might write.   Plus, get a list of the ways to start the Alienware to different modes before you crush the BONES.

  After all, in my case, as I am still under warranty, I know that the best thing is to call Alienware technical support, let them Remote Desktop and see if they can fix it while you watch.

  If Alienware Tech support can't help, or you have no guarantee.  Then, it is possible to restore the operating system without rewriting of your personal data.  PHEW.  Most likely, the computer has made a point of system check when it installed a new video driver.   It is also possible to reinstall all the operating system at reception on the first day of computer and do not damage your personal data, i.e. without formatting the entire drive.    However, all third-party programs will not be there when the computer returns to the top.  If you need to reinstall these third-party programs and save/activate them.

  I think the guys at tech Alienware will come along and give you links for how to do to save a copy of the registry, how to start reinstalling the operating system and all their support stuff.

  What they can not mentioned, if you try to start the computer and press F to start one of the special programs associated with tinker BONES.  We often have to hold down the control key first, then press the power button.   You bought a fast computer, and it is faster than your ability to press the Power button and get to the function key in time.

  Best wishes.

  I should say one more thing, if you reinstall the operating system, you start the computer, and if the computer can find a way to connect, it is likely to interrupt from the desktop computer and the screen go black and remain black during the download of the OS and install things, like all Windows updates.  I think it's all night.  Gets the confusion he uses any encrypted WiFi connection that you previously had.  (Yes, funny, just reinstalled the operating system, she kept the password to an encrypted connection.)   and also because the computer screen can go into rest mode, so you could get to the top and the screen being black, while it is in fact not download, but you wait to tell him to turn it back on.   Do not let throw you the black screen, it's a normal part of Windows re-installation of updates.   Be better if it had a splash screen telling you what was going on.  I hope that ten Windows is better.   Sigh.   Could give you some comfort if you disable WiFi before you find the BONES, also unplug the cable.   then you should come first in the initial window more directly, but you will have to attend updates anyway. and black screen, to the