Update with Windows 7 problems

Similar Questions

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• Error 0x8024D001 when you try to use Windows Update with Windows XP SP3

  I recently loaded Windows XP SP3 and get the error code and the following message when you try to update with Windows Update:

  The website has encountered a problem and cannot display the page you are trying to view.  Error 0x8024D001

  I tried the FixIt tool as well as load the latest version of Windows Update as described here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/error-number-0x8024d001/e299f282-01ed-42da-A495-18c64566f567

  Tried both this:

  http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x86.exe

  then this:

  http://www.mediafire.com/download/t1pvpp55v6aejpy/WindowsUpdateAgent7.6.7600.256-257.zip

  It still does not.  Any help would be appreciated!

  Naman R,.
  Thanks much for the reply.  Seen the idea on another site to change the setting of Windows Update to automatically install updates and then I was able to force the update without problem.  Not sure why it worked, but it did.

• 80244018 while searching for updates with Windows Update

  I'm working on Vista Home Premium SP2 Polish version.
  Lately, I noticed that I am not in my Windows Update system update. I've been unable to update my Windows Defender definitions. I was meeting a mistake and info on aid offers me to erase temporary files folders. I did exactly as he wrote it. But it did not work. Instead, now I can't even check updates, because when I stopped to do so, error 80244018 appears. A few days ago, everything was ok. I even tried to "restore system" (I don't know how it is in English - the system option it comes down to the previously written statement) - without help, cause the oldest back point I had was 8 months ago - and yet, the problem occurred.

  And besides - I do not know how and why (I noticed after awhile, and other people were using my computer) my catalog of Program Files default changed from system disk c: d: disk, I mean, whenever I have install something that installs Program Files, it wants to install it on d: how to return to c :?

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local computer, reputable and independent repair shop.

  On others using your computer:

  1. you should have your own password protected user account that nobody else uses. Your account may have administrator privileges.

  2. the other members of the family should have their own, protected by password account user without administrator privileges.

  3. anyone else using your computer must use a specially created with minimal privileges guest account.

  4. I strongly recommend installing & using Windows SteadyState on your computer to avoid such problems in the future.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Display screen with Windows 7 problem

  Original title: Monitor problem

  Before I explain my problem.

  First of all, let me tell you a little about myself.  I'm 73 and I am a Novice in computers and do not consider myself an expert...  I have a degree in electronics with over 40 years of experience. I've built several computers for family and friends for years.  The problem, which I'll explain you completely confused me.

  I have a 24 "I-Inc monitor that I bought in 2008.  It has a nice clear image that never changed.  Best deal I've ever done in the monitors.  This monitor is connected to my computer main clocked i5 of operating system: Windows 7 Ultimate Professional Media Center 6.01.7601 Service Pack 1 (64-bit) fully updated.  Monitor is driven by video card NVIDIA GeForce 210

  Then, all of a sudden a few weeks ago the screen on the monitor began to go dark and back, dark and backward, dark and back.  The last dark anywhere among the second up to 30 seconds and the flashing would go one to five minutes.  Then stop and everything is fine.  So maybe some time later, I went to a different Web site it would start again.  Now, let me say clearly, there is nothing wrong with this monitor or my PC, which brings me to my next story.

  After fighting this monster of darkness for a few days, I decided to move it to what I call my computer of the workshop.  This computer has i3 cpu with NVIDIA GeForce 210 also in perfect condition.  This computer is also a system dual boot, AND this IS A SAME KEY PART.

  It has Ubuntu 14.04.3 md64 (my PC is 64bt) AND 10 for Windows.  This monitor is also connected with a HDMI cable and when I plugged it in this workshop cpu, I first booted to Ubuntu.  Everything was great for about a minute then the monster of darkness began her dance for about two minutes then stopped and the screen image was perfect.  I flipped around for a while, then the monster of darkness happens again.

  OK, so I decided to stop and start Windows 10.  You may not believe this, but with 10 Windows, IT IS No. MONSTER of DARKNESS... PERIOD!  Still, it is still connected to my cp Studio win 10, and I'm interested in what I type and the image is perfect.

  My conclusions: nothing wrong with the monitor that is always connected to the cp workshop and work perfect.

  All is well with all of my equipment in each system.  I use my monitor backup on my main system and all is well.

  Issues related to the:

  Why this monitor would work to win 10 and not in Win 7, where he worked once for years?

  Hello

  Please provide detailed information on this issue. I apologize for the inconvenience caused to you.

  Sometimes we can deal with this issue because of the incompatibility between the display with your operating system drivers. It is important to update the computer and drivers also requires the update. I understand that you have tried to solve the problem and it fixed with Windows 10. This could be due to the compatibility of the display adapter.

  In the future, if you have questions related to Windows, please do not hesitate to write us and we will be happy to help you.

  _______________

  Thank you best regards &,.

  Isha Soni

• Updates to Windows 8 problem

  This is a new Asus Notebook and my first go on Windows 8. As soon as I turned on and managed to get the hang of navigating around her, I realized, I need to update to Windows 8.1. The store's site helpfully informed me how to install updates to Windows 8 that I need before installing 8.1 and I dutifully toddled off to do exactly this.

  I found the right place and discovered that there are 102 updates, I clicked on install and lost for a cup of tea, knowing that it would take some time. When I got home, it's always 0% installed. I searched on the forum here and followed the various suggestions that I could understand. I went into the control panel to install updates one by one, no joy. He says he does, but nothing ever really happens.

  I did the usual things, I checked my internet connection. I turned it and turn it back on. No joy.

  I have about a little more and find a troubleshooting updates. I ran it, it said I would have more chance if I ran it as administrator. I had no idea, I wasn't and clicked the button. He told me that he had solved all my problems. Fortunately, I tried to install the updates, this time, just watched it updates. For 30 minutes. I turned it and turn it back on. I tried again. To the best of my knowledge, he is always looking for updates.

  How the hell update this thing? I did nothing to it because I bought it today and I'm completely stumped!

  (Please use simple language, I used to set my ZX Spectrum in Basic. I don't have not changed since then.)

  Hi Jai,

  Use the troubleshooter in this article to resolve errors Windows Update '0 x 80070002' or '0 x 80070003 '. This problem occurs when some files in the update of Windows are missing, even if the update is downloaded and extracted successfully.

  Error code Windows Update '0 x 80070002' or '0 x 80070003 '.

  http://support.Microsoft.com/kb/910336

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Download update with Windows 10 known issues?

  I just installed Windows 10.  I received a notice of update of Lightroom.   I tried to update, but received a message update failed (49).  In my view, the 49 message problems downloading some kind.  Is this a known problem with Windows 10?  What should I do?

  You can download the update, the links are here (scroll down): Lightroom CC 2015.1.1 is now available

• Install Ubuntu with Windows 10 problems.

  Hello

  I had problems trying to install Ubuntu with Windows 10 (and Linux Mint also has problems). When I try to mount my hard drive (with 10 Windows on it), it says that Windows is put into hibernation. I want to install Ubuntu with Windows and not to clean install. Ubuntu detects my external hard drive and said: «There are currently no operating system installed...» ', but it does not detect my hard drive with Windows 10 on it.

  Thanks for any help,

  DaComputer Guy

  Sometimes, when the quick start is activated, it can cause Linux to correctly identify the Windows partition as being in the State of hibernation. Try to disable the quick start and see if it solves the problem:

  1. open the Control Paneland turn the mode icons

  2. in the list, go to Power Options

  3. in the left pane, click choose the power buttons what

  4. scroll down and uncheck the Quick start

  

• Update for Windows Vista problem

  I had a virus on my computer and I rebooted just my Dell Dimension 9200 from scratch with Window Vista.  Everything worked fine until I went to Windows Update and installed updates.  Now, I don't see any of my CD ROM drives listed.  When I go to Device Manager it shows CDROM drives (2 of them), but it is said that they cannot be used because the information in the registry is damaged or missing.  I tried to restore the computer to a restore point before installing the updates, I did, but the system restore no longer works.

  After wringing my hands and trying to find and install the drivers without success, I have completely reformatted (AGAIN) and reinstall Vista reinstalled the printer Dell discs (AGAIN) and he did exactly the thing again.   This machine has no new material and ran Vista successfully for about a year before the virus got it.

  On a second note, almost half of the updates do not give an error code that indicates that the computer uses a proxy server.  This is not the case.  I use a DSL line to a medem then my router / switch that I have used for years.  This computer is connected to the router / switch with an ethernet cable.  I use the router so my laptops can connect wirelessly.

  Hello

  Contains the exact error message and the error code that you get when you try to update Windows.

  Follow the steps below and check if that helps you.

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options .

     Note If the menu is not available in the Internet Explorer window, press the ALT key on the keyboard to display the menu.

  3. On the connections tab, click LAN settings , and then click Advanced .
  4. Remove all the entries in the Exceptions section, and then click OK .
  5. Close Internet Explorer.
  6. Click Start and type cmd in the box start the search .
  7. In the list of research results, right click on Cmd.exe , and then click run as administrator .
     If you are prompted for an administrator password or a confirmation, type the password, or click continue .
  8. Type the following commands. Press ENTER after each command.
     • netsh winhttp reset proxy
     • net stop wuauserv
     • net start wuauserv
  9. Try again to install updates.

  Also try the link to the following article:
  http://support.Microsoft.com/kb/971058

  For CD/DVD player, follow the link below:
  http://support.Microsoft.com/kb/314060

  All the best!

• wireless network with windows vista problems

  My laptop has windows vista edition family service pack 1. It does not connect to my router thomson TG585 v7 gateway. Ive tried everything nothing helped. I've heard this may be a compatibility problem with windows vista and there may be an available for this patch. Is this correct and how I could get it?

  You have a power switch Wireless switch on your laptop?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Activation with Windows Ultimate problem

  I have a new job, but wanted to keep exclusively for development.  So I discovered that RDP with multiple monitors does not work with Windows 7 Pro, only Windows 7 Ultimate/Enterprise.  I have an active subscription to CARDS that gives me at least a Windows Ultimate license.  I have RDP'd in the new workstation to perform an upgrade of Windows.  I entered the license key of CARDS, but the process completes successfully.

  So, I switched gears and decided to upgrade the old machine to Windows 7 Ultimate using the same process, but connected directly (no RDP).  It works beautifully.

  * PROBLEM * now my new machine requires activation, and it won't work with Windows 7 Pro license. In my opinion, he thinks that he himself has upgraded to Windows 7 Ultimate.  How can I fix it. I'm happy to have the new machine to stay in Windows 7 Pro, because I can now remote in the old machine using all four of my monitors.  How long before my new Dell expensive workstation is reduced to be a boat anchor?

  TIA,

  Miles

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Touch screen with window 7 problems

  The touch screen does not work on the PC.  It was working and just stopped one day after an update.  I have WIndows 7 Professional.  I had the PC for about a year.  He worked until about 3 weeks ago.  I went to control panel or device and looked at the Hardware\pen and he's not here.  It was there, but not know and it's on the other PC with windows 7 Professional that I have.

  The touch screen does not work on the PC.  It was working and just stopped one day after an update.  I have Windows 7 Professional.  I had the PC for about a year.  He worked until about 3 weeks ago.  I went to control panel or device and looked at the Hardware\pen and he's not here.  It was there, but not know and it's on the other PC with windows 7 Professional that I have.

  Download and install the drivers from the manufacturer of the component/system devices.  Material is supported by its manufacturer - including all the drivers and other software.

• Printer/Scanner with Windows 7 problems

  I recently bought a new computer with Windows 7.  I have a HP Deskjet 5650 printer and Windows 7 does not detect.  I have a HP Scanjet 5370C scanner.  Windows 7 detects it, but tells me that there is no driver for it.  I searched for driver downloads, but apparently it is not a driver for the printer or scanner.  Can someone tell me how to solve problems - other than buying a new printer and scanner?

  Re the 5650...

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01874725&LC=en&DLC=en&cc=us&product=304445

  Re the 5370C...

  There is no driver support HP, but Vuescan supports... There is a trial version...

  http://www.Hamrick.com/

  Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• Performance on a Satellite Pro A120-185 with Windows Vista problems

  Can someone help me with this.
  My laptop is a new Satellite Pro A120-185 with Windows Vista.

  I had my last configuration less portable, but you know what? He was faster!

  I'm supposed to have cetrino duo 2, 2 GHz and cach of 4 MB, FSB 667 MHz, RAM 1 GB, even though they are at 533 MHz, 100 GB 5400 RPM HARD drive / MIN.

  It is slow, not only starting, programs opening, plays something, the browser and even to copy from the CD to the hard drive sometimes give me time 4 days left!

  Clicking on something takes forever. What's wrong?
  Need less to say that with vista no and I mean none, of my devices are busy. Dongle Bluetooth, USB disk, printer, NAS, and and...

  Hey dude,

  Please don t forget that Vista has been installed on your laptop and the additional tools of Toshiba and the utilities that control many additional features!
  There is a huge difference between Vista and early Microsoft operating systems.

  The Vista eat computer resources and many devices old don t work or cannot be installed because the 3rd device manufacturers don t provide Vista drivers!

  In my opinion an upgrade to 2 GB ram would increases the performance of laptop.
  All programs and utilities could be loaded more quickly

• T232HL touch screen with windows 10 problem

  Hi, I would like to know if there is no update drivers cool touch for windows 10 for this touch screen?  My update to windows 8.1 10 works well outside the screen I have a mistake 18 in Manager device for this cool driver touch so anyone can help.

  concerning

  Scotsman

  Hi I have it fixed by going to Device Manager and click on the faulty driver yellow cool touch and then update the driver and then select Browse my computer then to let me pick from a list of device drivers. Then I had 2 choices I chose not the driver from acer but it in the list of the 2 do not remember the name as long as it isn't there anymore.

  hope this helps someone else.

  concerning

  Scotsman