my computer downloads all the update, but instalton fail to do

Similar Questions

• Download all the updates, but the installation fails. Not shown in the history of the update. XP SP3

  Some security updates installed through essentials

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. you receive an error message?

  Read the following article that may help you resolve this problem.
  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation
  http://support.Microsoft.com/kb/906602

• Do I need to download all the updates?

  I have a T400 at full load, do I have to download all the updates of the Lenovo Support & downloads / downloads and drivers? The question is I know updates are good cause they solve problems, but the thing is there already an update service in the ThinkVantage Toolbox, and yes I have to upgrade my laptop computer from there. Now im downloading updates and drivers manually from the site, I don't want to download a update that will downgrade my laptop because maybe its already up to date, or something.

  Any tips?

  If you get auto updates, then you are good to go. These are the same updates that are available on the lenovo support site. Now, I know that the automatic updater takes a few days to catch up with the support site, but no reason to constantly check the support site.

• New RSS downloaded all the messages, BUT 'To' watch as the author of another blog in my stream.

  I added a new blog to my 'articles & News Feeds', the first since the update, I added to 24.6.0. 6 posts on the blog completely downloaded, but when I looked at the contents of the folder, the column 'From' a was filled with the name of another blogger in my stream. The two articles are blogger, if that makes a difference. Of course, this isn't a major problem, but it is an annoyance.

  My guess is that the blog uses a common e-mail address. So, delete the entry in your address book for the person who is not displayed.

• I can download all windows updates, but my system will not configure and install them. I have Vista, what happens?

  nfkgjaLRjh:KF'e; ktg; B; love my lifeE

  Hello

  Do you get any error messages? More detail of what is happening and noted that allows us to help you.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:
  
  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• COM Surrogate does not work on my computer. I installed all THE updates, but this still does not work. Help, please.

  I don't know what is COM Surrogate.  It lights up just on the screen and I don't know why!  He just tells me to install important updates, what I've done.

  Hi Carolina,.

  According to Alexander in this thread of TechNet:
  "COM Surrogate (dllhost.exe) is an application that is often used by Windows Explorer to isolate themselves from codecs (if explore would be the codecs in its own process, it would crash as it did in XP, so explore generates dllhost to actually treat the miniatures, etc outside its process space)."
  http://social.technet.Microsoft.com/forums/en-us/itprovistadesktopui/thread/f6630b7b-4692-46df-91bc-db10da2d1346/
  There are a few things that people have done to solve the problem.
  1. If you have Nero or Roxio Easy CD Creator installed, try to uninstall it to see if this problem is still happening.
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
  ' 2 ' Kiifer ' reported that checking the "Always show icons" option in folder options seems to have solved their problem.
  Click Start > click computer > press the Alt key to bring up the menu option Tools > click on options files > click the View tab > check the box for always show icons, never thumbnails. This is the first check box under files and folders.
  Please keep us updated.

• I try to install the updates, but they fail - error code is 80070005.

  Let me start that I'm computer illiterate until a point and it becomes very frustrating...

  I use Windows Vista Service pk2

  I went and deleted temporary files and all requested without success.

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates).

  Please check that you are logged into an account with administrative privileges.

  Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate.  What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. Save the file on your desktop zip and extract the file:
     -Right-click on the file and select extract all...
     -Click Next when prompted for the Destination.

     Therefore, you should see a folder called AccessChk on your desktop.

  3. Open the folder AccessChk

  4. Hold the SHIFT key and right-click in the window.  Select "open here command prompt.

  5. A command prompt window should open a similar message:
     C:\Users\\Desktop\accesschk >

  6. Type the following command and press ENTER:
     "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
     Tip: You should be able to copy and paste the command into the command prompt.

  7. Close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. Double-click Accesschk.txt (text file), it should open Notepad.

  9. Copy and paste your results with a new question in the forum of Windows Update.  (Make sure that you write 0x80070005 in the subject).

  Reference1

  If this is not enough: -.

  1. If please download the subinacl.msi from the following link and save the patch to installation on the desktop:
      
     http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
     SubInACL (SubInACL.exe)
     SubInACL is a command line tool that allows administrators to get the security information on files, registry keys, and services, and the transfer of information from one user to another, from local or global group to and from a domain to a domain.

  2. Please, go to the desktop and double-click on the downloaded file.

  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

  4. Click the "Start" button in the "Search" bar, type: "Notepad" (without the quotes) and press ENTER.

  5. Copy the following commands, and then paste them into the opened Notepad window:
      
     off @echo
      
     Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
     Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
     Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
     Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
     Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
     Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
     Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
     Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
      
     @Echo =========================
     Completed @Echo.
     @Echo =========================
  
  @pause
• After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.
• View the desktop and right click the reset.bat file, then choose "Run as Administrator".
• You will see a window of type BACK treatment.
   

NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

Reference2

This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

Notes are answers Microsoft support engineers
Support for Windows Vista technical and troubleshooting problems
Microsoft Help and Support

• What happens to my all the updates, if I Re install Win 7 new

  After 3 years, I found that the supporter of Windows 7 (70 GB) is full in my hard drive, can be due to many UPDATES all these years. Because I don't know how to free up space on this drive, I decided to re - install Windows 7 again. In this case, what happens to all my received UPDATES earlier. Do I have to download all the UPDATES again? Help, please

  Yes, you will need to submit a new application of updates after reinstall. However some later updates are in fact replaced by later that the results can be more effective. I also download and manually apply service packs on new construction as allows me to apply the setting "nobackup.

  On the last one I made after that the SPs, I had a little less than 100 updates to apply to the wide then came running clean disk with the option to clean the system files to delete history of update files.

• I get an error 643 since April and unable to install an important update. I tried to download the update, but your instructions on the Web are very confused. It's the only update that gave me problems.

  I get an error 643 since April and unable to install an important update.  I tried to download the update, but your instructions on the Web are very confused.  It's the only update that gave me problems. Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://support.Microsoft.com/kb/KB976982

  You receive the error 643 0 x or 0 x 80070643 when you try to install the updates of .NET Framework by using Windows Update or Microsoft Update

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/971058

  How to reset the Windows Update components?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not solve the problem, repost in the appropriate Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported

  For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported. Fix - it crashes too much with the line "invalid command line" when I try to run it.

  Hello

  1. this problem occurs only with this particular update?

  2 did you change on your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can reset the Windows Update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 2

  You can read the article.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 3

  Step 1:

  Place the computer in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. click Startand then click run.

  b. type msconfigand click OK.
  The System Configuration utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.

  When you are prompted, click restart to restart the computer.

  
  Step 2:

  Download and install the update from the link.

  Update security for Windows XP (KB2719985)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30282

  See also:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

• Code 45 for zune. Peripheral USB of States is defective; Windows does not recognize it. This is for XP. It has worked before and nine for Christmas. I have all the updates, etc. My Zune software starts whenever I plugged it to my computer.

  That's my XP OS.  He worked before that date and a new Zune for Christmas, a couple of days.  I have all the updates, etc.  My Zune software starts whenever I plugged it to my computer; now all I get is the error above.
  The zune turn on when connected load, and the system can't recognize not like before.  After troubleshooting, I actually uninstalled the usb and the reinstalled system but said that there is a problem.
  Help!

  Hi, Jason and thanks for your response.  Unfortunately, this was not correct.
  After several tests, including two restarts then stop / restart, I just gave up and let it go... and then, the next day, I retried it, and it worked! I don't really know why, but I have a feeling. While I was working with my zune by itself, I went to albums, shuffle all and then my Zune completely erased, restarted and then played as usual. I think that this reboot of my Zune has helped my system to detect.  What do you think?  Also, I can do the same thing somehow - do a "reboot/reset" my Zune?  In any case, my Zune works perfectly, I really loved and added additional music to today and bought a warranty last night.

• It is important to install all the updates popping up on my computer?

  Installation of updates

  I was wondering if it is important to install all the updates popping up on my computer.  Looks like I get notifications every day!  Is it good or bad to make them... and so good, that I have to do all of them?  What those specifically do I do?  HELP CoffeeAnnie

  You need install all the critical updates in order to preserve the safety of various exploits of hackers and malware from your Vista.  Also called security updates, these loopholes hackers have found to enter your system somehow.  Important updates correct various problems of performance.  All updates are designed to prevent potential problems and enhance your Windows experience.

  Normally, the new updates are available on Windows Update the second Tuesday (aka "Patch Tuesday") of each month.  Occaisionally updates are also available on the fourth Tuesday as well, but the vast majority is released on Patch Tuesday.  The only time when Windows updates are offered to other dates is when an update is critical at the moment, which means that Microsoft has detected an imminent danger of criticism for its users.

  Office updates follow the same pattern.

  There are other Microsoft products including the team out of updates on a different schedule, but who do not concern most users.

  I recommend to use the automatic updates and install programs.  Keep your Windows up-to-date protects your investment in your computer.

• installation failed several times to KB2656353 and KB2656370 security update. I downloaded all the patches and recommended tools. What should I do?

  Received phone call from someone who identified himself as a member of the Technical Support of the Windows team.  Says my calculation had sent messages back saying that I had a virus.  Was skeptical and didn't know how to check if it was legitimate then toldl him I would take care of him. Ran Norton Security and Windows security and both reported that my system do not have a virus.  Noticed that Windows update was not the last 2 weeks so I tried to run the updates.  I get a sayingi error message that FAILURE of installing up-to-date security for KB2656353 and KB2656370.  I downloaded all the patches and recommended tools. What should I do?

  Have you tried the recommendations in this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-install-update-kb2656353-i-am-receiving/f3c353ca-4d85-44e6-a5f0-eb9a5330d7c8

  and this article:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-updates-continue-to-fail-with-codes-0x66a/5e05e18e-E2E5-400e-B114-75f155571b5c

• I can't have the option in menu to 13 items to work.  Any ideas?  I have already downloaded all the Templates menu and updated the software.  I never had this problem with 7 elements.

  I can't have the option in menu to 13 items to work.  Any ideas?  I have already downloaded all the Templates menu and updated the software.  I never had this problem with 7 elements.  With the help of 13 elements, I can successfully burn my movie on a disc (DVD) without menu.  The burning process is interrupted after that I added a menu.

  Rick

  First of all, please remove the stopper at the end of the content of the timeline. It is not necessary it and burn the causes of the problems.

  The main Menu marker should be OK, no similar problems as the stopper a.

  RTA

• Hello.  I bought Photoshop in Italy about 4 years ago.  I bought a new camera and Photoshop won't open the RAW files.  I tried to download the update, but it still does not work.  How can I get updates?

  Hello.  I bought Photoshop in Italy about 4 years ago.  I bought a new camera and Photoshop won't open the RAW files.  I tried to download the update, but it still does not work.  How can I get updates?

  Locking: double post. See: Hello.  I bought Photoshop in Italy about 4 years ago.  I bought a new camera and Photoshop won't open the RAW files.  I tried to download the update, but it still does not work.  How can I get updates?