My computer need to connect to my printer HP 4300 series

Similar Questions

• I need to connect to a printer in another room. How do I do that?

  I want to connect to the printer in another room in the House. I have the printer installed on my computer, but cannot print from it. This computer is windows xp and the other computer, it is connected to a windows vista. How can I connect to the computer?

  You must go to the printers properties (on the computer that its connected to), and then share it. Then add the printer on the XP PC drivers (if it's the PC that you want to print from). Printers / add a printer / select network printer. Add inf file of the driver here. You may need to extract the file to the printer to get the INF for her

  Of course, these 2 PC must be connected by wireless or ethernet cable

  But if the printer does not work (on the computer its connected to), you can connect to one you want to print from. Then install the drivers for it (install the drivers first, do not turn on the printer or connect), until it says connect

• Computer does not connect to the printer epson stylus CX3810.

  Original title: computer will connect to the printer because the loader program does not list the stylus CX3810 epson and I can't find a few good sub. The printer worked ok before two days ago.

  Can not recharge my Epson stylus CX3810 because it is not listed in the list of available printers. It worked fine yesterday.

  Hello

  1. what operating system is installed on the computer?

  2 have you made any changes to the computer before the show?

  Method 1: Uninstall and reinstall printer

  See the following article:

  Install a printer

  http://Windows.Microsoft.com/is-is/Windows7/install-a-printer

  Method 2: Because it worked yesterday, you can restore the computer to a date where it worked fine before.

  Reference:

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• My computer does not connect to my printer

  My printer is an Epson Workforce 645 and my computer is a Mac Air.  Sometimes it is not a problem, but now I can't the connected.  My wifi is not working properly and the printer reacts to scanning, but do not print.  What should I do?

  Hello, just to let you know, this is a Forum for HP printer.  For assistance, contact the good folks at Epson.

• Computer will not connect to the printer over the network. How can I configure the fax as well?

  I'm new here and just beyond frustrated trying to get this to work for my office.

  My other printer works by USB because my computer give me a warning throughout the day that the USB is corrupted. Anyway, I got a new printer and I am trying to connect through the network. My iPhone prints through it. My computer OS is Windows 7 64 bit.

  My printer is HP Officejet Pro 8600 all-in-one

  I want to connect from the network, and I want to set up the fax. My phone does not work when I plug the line in the printer then phone ext line into my phone.

  I'm confused! Help someone! Please, I beg you!

  Hi ahagereo,

  To connect the printer to your network, follow the steps outlined in the document below.

  http://support.HP.com/us-en/document/c02886889

  Fax: Make sure you have the telephone line connected to the port of line 1 to the back of the printer.

• Why my computer does not connect to my printer (HP Photosmart 7520) wireless?

  Since obtaining the printer, my laptop has always been able to send documents to the printer with absolutely no problem. As far as I know, it works because the printer is connected to the same network as my computer wireless.

  However, none of my colleagues are able to print, in spite of being connected to the same network.

  Is there something to do? Much of the time, the printer is not even appear on their drop down box (when trying to print in microsoft word for example), but he always does on mine, and we are all on the same wireless network.

  Any ideas?

  For issues with Mac that I suggest you post in the forum Mac printing and scanning here.  Do not forget to mention the model of the printer, and also which version of Mac OS X, users have.

  For Max OS 10.6 to 10.9 drivers are available on the site of HP here.

• Unable to connect to the printer Canon MF4700 series, please help

  to install the printer to my computer vaio T series

  Series 4700 MF Cannon is not in the list to select

  How can I connect it?

  Thank you

  Try here: http://www.canon-europe.com/Support/Consumer_Products/products/Fax__Multifunctionals/Laser/LaserBase_MF_series/i-SENSYS_MF4730.aspx

• Canon MG5650: Canon MG5650 printer/scanner that can I print using the wifi but HP spectrum says I need to connect to analyze

  I have a HP spectrum 13 and we operate a wireless LAN at home that includes the Canon MG5650 printer/scanner. The connection between the two devices works very well generally. I can still print without problem. Today, I am not able scan - the laptop says that I need to connect to the printer to be able to do, but I am well connected via wifi, I can print.

  I turned off the laptop and rebooted. I stop the printer and restarted. No action produces a change.

  The printer is conducting the analysis. If I perform the scan at the printer operation, the scan is successful and the printer sends the document scanned to the laptop of my wife - it's the primary printer that will recognize the cannon.

  This was not a problem never before.

  I would appreciate any advice on next steps to solve the problem.

  Thank you.

  Tony

  Eventaully problem solved by adding a new application on the Canon site on the desktop and removing the old app scan supplied with the laptop. It does not explain why the problem occurred in the first place but provides a "fix."

• "Unable to connect to the printer. Operation failed with error 0 x 00000866", setting up a network printer

  Title of the Moose: error 0 x 00000866

  I have a laptop with windows 7 Professional.

  When I try to install a network printer I always get the message "cannot connect to the printer. Operation failed with error 0 x 00000866.

  What can I do to fix this

  Hi ETPM.

  You can try the following steps and check if it helps.

  Method 1:

  You can try to start troubleshooting printer and check.

  Check out the link:

  Open the printer Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  Error message when you try to install a network printer on a Windows Vista-based computer: "Windows cannot connect to the printer operation cannot complete (error 0x0000000d).

  http://support.Microsoft.com/kb/947236

  Note: You can read this article and try to proceed as for Windows 7 also.

  Important: Serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow the steps in the link mentioned above carefully. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/windows7Back-up-the-registry

  Method 3:

  If the fix above is unable to get the printer working on your client machine to vista, so I suggest to follow the steps mentioned by Afzal Taher as of Friday, December 18, 2009 02:00.

  http://social.answers.Microsoft.com/forums/en/w7network/thread/954c4b9d-2F4C-4b1b-8fb6-49204ed96dfc

  Also check out the link:

  Install a printer:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• my printer did not come with all the cables needed to connect to my computer

  I just got a PIXMA ip2820 and he came with all the cables needed to connect to my pc or is it wireliss and if so how I managed to connect wireless

  Hello.

  Our printers do not come with USB cables.  If you do not have a cable connected to a previous printer, you can buy any B USB standard cable locally has to establish the connection.  It is a pretty common cable located at most major retailers office supply or electronics.

  The iP2820 can only be used with a USB connection.  It doesn't have wireless capabilities.

  It has not responded to your question or problem? Find more help contact us.

• HP G72: connect my computer hp laptop for wireless network printer (4620 series all-in-one hp)

  I tried several times to connect to my printer wireless in the House and I always feel bogged down in technical language that is foreign to me. Questions asked, like URL, addresses and others and I don't have any idea where to find this info.

  I intend to try and install this printer one more time so mget the specific questions I need answers to, so bear with me please. Will be later.

  delnann

  While we're waiting to hear from you @7delnann7; Although I'm not sure of the question, you are experiencing or questions you have, I suggest running printing HP and Scan Doctor because this may require a very easy to use and useful.  HP printing and doctor Scan is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source: try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to find the key and the box are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

  • If you see a red X (), follow the onscreen instructions to fix the problem.

  Thanks, I look forward to hearing back on your part. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message.

• I have a printer HP (part of the package with the computer) which will connect via the USB port is no longer in my office. He has worked previously so, any ideas on how I can get it to work again?

  While I do not know there have been changes to the system (updates and so on), I don't know what modifications have been made or that one; If any, may be the cause of the problem. Compound that with, I can't get back far enough to get to the last time that I used this printer with this computer and it is a puzzle all around.

  Let me know what additional information as appropriate, you need, maybe the way to collect (if it is not something that I already know how to do) and we'll see if we can get these papers start college again.
  System: HP p6604y Windows 7 Home Premium 64-bit
  Processor: AMD Athlon II X 2 220 processor 2.80 GHz
  6,00 GB (5.75 GB usable) memory
  The printer is HP Deskjet 3000 J310.

  Hi Michael,

  1. What is the error you get all trying to connect to the printer?

  2. the printer works properly when connected to another computer?

  3 is. the computer able to recognize any other usb device?

  Follow these methods.

  Method 1.

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems: http://windows.microsoft.com/en-us/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Method 2.

  Why can I not print? : http://windows.microsoft.com/en-us/windows7/why-cant-i-print

  Additional information.

  Find and install printer drivers in Windows 7: http://windows.microsoft.com/en-us/windows7/find-and-install-printer-drivers

  Install a printer: http://windows.microsoft.com/en-us/windows7/install-a-printer

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• Settings need to connect a second desktop computer using a NetGear wireless adapter.

  Original title: wireless settings

  I need the settings to connect a second desktop computer using a NetGear wireless adapter.

  The Belkin router work a lot using my Tablet and streaming movies but I can't understand

  the settings on the second PC.

  Any help will be appreciated.

  Thank you.

  "Settings", you need are the SSID (network name) and the encryption key (password).

  Unless you have configured the router to 'hide' the SSID (generally a bad idea), you will see in the list of available wireless networks.  Then, the only thing you need is the encryption key.

  If you do not write your encryption key, you can find it by logging into your router configuration utility.

  If you have a computer running Windows can now connect to the router, open a command prompt window (start > run > cmd > OK) and type "ipconfig" (without the quotes) and press ENTER.  Take note of the 'Default gateway' address.  It is the IP address of the router.

  The default IP for Belkin routers is 192.168.2.1.

  On a computer that is already connected to the router, open a browser (Internet Explorer or Firefox) and enter the IP address of the router (the gateway by default, you noted above or 192.168.2.1).  If you do not have a computer that is connected to the wireless router, you will need to temporarily connect a computer to the router by an Ethernet cable.

  Connect to the router configuration utility.  If prompted for a password and you don't remember, you need to reset the router to its factory default.  Return ticket for additional instructions.

  Once logged in, click on "Security" under "wireless" in the menu.  At this point, you should see a page that shows your password.  Write it down and exit the router configuration utility without making any changes.

  For more help, post back with the model of your Belkin router and also mention if you have any Windows computer that can connect to the router (and if yes, what version of Windows they use).

• My HP Officejet 4300 Series printer is not printing-"printer error says"no connection to the computer.

  Original title: My HP Officejet 4300 Series printer not print

  The mistake of the printer says "no connection to the computer. The computer error says: "the printer is offline. All necessary cables are connected. What should I do?

  Hello

  Have you made changes on the computer before this problem?

  I suggest you try this method and check the status of the issue.

  Printer in Windows problems.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  You can also refer to:

  Resources for the resolution of the printer in Windows XP problems.

  http://support.Microsoft.com/kb/308028

• Apparently, I got an automatic update of Windows XP. All of a sudden my computer does not connect to my HP Laserjet 1000 printer.

  All of a sudden my computer does not connect to my HP Laserjet 1000 printer. These work very well together for several years.

  Now all of a sudden I get a message that the computer cable is not connected.  I tried to charge the printer program.

  I unplugged and reconnect the cable to the computer, etc.. The system does not work.

  I learn by two other people, who have automatic updates of Windows, they had the same problem. We have a Kodak

  printer and the other has a Lexmark printer. This makes me think that the problem is in the updates of Windows.

  So, what should I do to fix this? I'm NOT a computer person and I'm confused.

  James

  Hello

  · The updates have been installed on the computer?

  You can follow the procedure from the following link: printers HP LaserJet - USB Devices closing work unexpectedly in Windows XP: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=45674&prodTypeId=18972&prodSeriesId=45674&objectID=bpl11421

  You can also access: family of products HP LaserJet 1000 - Error Messages on the computer (PC): http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=240170&prodTypeId=18972&objectID=bpl11045