my computer quit recognizing the external speakers

Pavilion dv77128nr that I didn't do any changes that I know, but now the laptop is back with its speakers instead of those I plugged into the speaker port.  I checked the speakers with my mp player 3 and they always seem to work

The setting may revenue...

The help file on it's also good that any hand wrote 'how to '.

If you want, take a look and see if it helps you:

HP Notebook PC - troubleshooting problems of sound with external speakers and headphones in Windows 7

You could try a Hard Reset, also, if your phone has a removable battery:

Computers laptops HP - use the Hard Reset to fix software and hardware problems

I hope that one of these AIDS.

Tags: Notebooks

Similar Questions

  • Pavilion, Windows 8 desktop computer, none of the external speakers. internal speaker?

    How sound my desktop computer Pavilion, Windows 8, with none of the external speakers?

    It says no driver installed audio internal speaker.

    Where can I download the audio driver appropriate?  Which audio driver would it?

    When you request support, please provide the full model name and product number (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

    The information requested above are on the side, back or bottom of your computer, or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

    You get no sound without external speakers of a certain type. Your HP desktop computer doesn't have the internal speakers and therefore requires external speakers, before that resonates. Please buy a set of external speakers for your problem.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • Help! The external speakers on HP G62-225dx laptop connection?

    Sew I connect external speakers for laptop HP G62-225DX?  If so, connect to the port "headphones"?  Or do I need speakers with USB connectors? All recommended speakers Logitech?

    Hello fpcorpuz52,

    I see that you have questions about the connection of the external speakers to your HP computer.

    You should be able to connect the speakers to the headphone jack of the laptop. They work without having to do much or any installation or configuration.

    With respect to the recommendation on the speakers, I have a preference to recommend. I would like to just check the reviews before you buy any game, if you plan to buy some.

  • HP Pavilion DV7: No sound on the computer or the external speakers

    Hello

    My computer or external speakers have audio.  While trying to determine what could be the problem, I think

    I deleted by mistake the audio driver.   When I was troubleshooting in Control Panel under the sound

    category I selected the button disable without realizing it would actually delete the driver software.

    Is there a way to retrieve that or I will have to buy new drivers for my computer?  I s there a way of

    get a free download on the sound card drivers or is there any reasonable out there that you know?  I have not a

    warranty on my computer.

    Thank you for any advice or help.

    Hello

    Yes, that's correct.

    Kind regards

    DP - K

  • Vista Windows, computer dell laptop, adding external speakers

    How can I add speakers to my dell laptop, I unplugged the system speakers on my desktop computer and all I see is the old connection to the desktop and the connections to the speakers of course it is the power source, but can't see somehow this must be connected, any idea what connection of the parts that I need to get the system in place and work any help would be grateful steve

    How can I add speakers to my dell laptop, I unplugged the system speakers on my desktop computer and all I see is the old connection to the desktop and the connections to the speakers of course it is the power source, but can't see somehow this must be connected, any idea what connection of the parts that I need to get the system in place and work any help would be grateful steve

    Connect the plug of 8mm of the speakers in the audio out (headphone jack) on your laptop.  The speakers in their default value of medium power (plug into wall, plug it into a USB POWERED port, etc.).

  • No sound playback after removal of the external speakers.

    My PC (HP Pavalion with media Center TV model m8090n) was good with the sound with external speakers (Creative 3.1). I had now removed these external speakers and intend to use the PC without these elements, but on the internal/built-in speakers. But surprisingly, I find no sound playback in the PC after removing these external speakers. Please suggest some remedies/cause.

    Hi H K Tyagi,.

    Step 1: Run the fixit available in the link below and check if this solves the problem

    Tips for solving common audio problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

    You can follow the other steps mentioned in the link

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think

  • 46HX800 directly on the external speakers?

    I have a 46HX800. Is it true that both audio outputs (both RCA and digital audio output plugs) are designed to go to an amplifier or powered speakers and there is no way to connect directly to external speakers?

    Hello homeboy.

    Yes, the red and white Audio Out connection and the digital audio output require the use of a receiver or speakers.

    Speakers can be connected directly to the Audio Out jacks.

    Kind regards

    Colby

  • computer not recognizing the cd/dvd.

    MY HP computer do not recognize cd/dvd = when I go to Device Manager and double-click Properties it says Error loading driver (error code 19)-
    I have windows vista home edition/i tried to go to the Device Manager and on some suggestionn those of the United Nations since the CDROM
    then re booted.
    It shows in Device Manager - but always watch - sign and sign - yellow
    without change and the same message as above
    Help, please

    Hello
     
    1. have you made changes on the computer recently?
     
    The unit will not work properly if the driver is damaged or can not load the Windows generic driver. To resolve this problem, try running Microsoft Fixez_ the. Visit the following link to download the fix it: http://support.microsoft.com/gp/hardware_device_problems
     
    You can also run this fix if the still lingering question and check the result: http://support.microsoft.com/kb/314060
     
    If the problem persists, then please contact the manufacturer of the system for more support.
    http://h20000.www2.hp.com/bizsupport/TechSupport/ContactHP.jsp?
     
    I hope this helps.
     
    Kind regards
    Syed
    Answers from Microsoft supports the engineer.

  • The external speakers with bluetooth audio playback stops working after 20 minutes

    I have a weird problem with bluetooth audio on my Acer Aspire 7600U. I have a bar of his JBL SB200 with support bluetooth and when I'm playing audio to it from my laptop (Sony Vaio) or my phone (Nokia Lumia) it works fine. But during audio playback of the IOA, the soundbar goes off after about 20 minutes in the middle of a song with such as Spotify. I suspect it's something different with the Aspire AIO bluetooth adapter which does not sound bar to stay on. No idea why? Does anyone else have this problem?

    I have now solved. It's another computer, I had who took control of bluetooth speakers every now and then...

  • Toshiba Satellite M60 - problem sound configuration for the external speakers 2.1

    I just bought:
    "Creative I-Trigue 3400" 2.1 channel PC speakers for my PC laptop Toshiba M60.

    My problem is that there is no sound in the right speaker.

    * Headphone/onboard speakers work very well
    * I have updated its (Realtek AC97) card drivers
    Creative speakers work fine with my I - Pod
    Creative speakers work fine with my laptop less expensive/Sour.

    I have experimented with the settings of his Panel, including settings of Toshiba virtual sound without success.

    any help would be appreciated.

    Closer examination, I noticed that there is a slight (millimeters) overlooking 'lip' above the headphone jack.

    The creative speaker comes with a heavy input jack which gets partially blocked by this fake - my input cable using cheaper "thinner" solved my problem.

  • iMac does not recognize the external speakers

    After working flawlessly for two years, my iMac (running Mavericks) now does not recognize my speakers B & W MM1.  I restarted my iMac, unplugged and reconnected my speakers as well from the electrical outlet and the USB connection, but nothing has worked so far.  All other connections are solid.  Any suggestions?  Thank you.

    Hmmm. These speakers are USB, so they should be relatively problem-free.

    Try to disconnect all your USB devices, restart, and then reconnect the USB devices again. It remaps the USB.

    In addition, make sure the configuration under the system preferences/Sound/output is correct.

  • Cannot make a backup of the computer to reformat the external hard drive (error 0 x 80780029)

    Hello!
    I recently had to reformat (disk error problem) backup my drive (USB) hard external on which I did a complete PC. After reformatting the drive, I tried to make a new PC full to the top on it wihtout success because the old cliché could not be read ("reading of the volume shadow copy on source has no" error code 0 x 80780029), apparently, the backup and Restore Center kept in memory the old backup I did on my HDD reformat and seeks to go further. How can I get around this to remove the trace of old shadow copy and/or the complete PC Backup?

    Thank you very much in advance for your help

    Richard

    Hi Kevin!

    No indication of you... Should you the CBS.log?
    Still, I have the problem with the backup center and looking for an old backup restore complete PC that no longer exists (reformat the drive) and therefore prevent me to make a new complete PC on the USB disk reformat bacup.

    Thanks again for your help!

    Thatankha

  • Computer stopped recognizing the scanner.

    My computer has started to not recognize the scanner in my hp officejet j5780 all-in-one. I uninstalled the driver, downloaded a driver from the HP site and re-installed. Now, the computer still does not recognize there is a scanner. I have Mac OS 10.6.8 and connect to the all-in-one with a USB cable.

    Please disregard question. I found that if I go through the scan.app to scan, the computer recognizes the scanner. Until I'm able to scan through the print/fax under my system preferences icon. Don't know what messed up this system, but I can scan now so everything is good.

  • Impossible to listen to the music or sounds using internal and external speakers

    Original: connect external speakers

    I have an Acer Aspire Z5700 all-in-one computer.  I have two external speakers with an audio jack and a USB port that I can connect to the computer and I when it is connected to the computer, I hear out of them my question is how to get the sound of the computer system internal and external speakers at the same time?

    Hi Joseph,.

    I would keep informs you that it is not possible to play sounds or music using internal and external speakers at the same time.
    You can play music using any one option at a time, either the internal speakers or external speakers.
  • update my laptop stop recognizing the driver of Bus controller universal external hard drive.

    Recently my laptop stop recognizing the external hard drive. It was working fine before. The MFG. external IOMEGA Hardrive said universal Bus controller driver to be upgraded. It is Intel (R) 82801DB/DBM USB 2.0 Enhanced Controller pipe - 24CD. My several attempts to install an automatic update of the driver from the Intel Web site has failed.  What to do next?

    Hello

    1. which is the version of the service pack installed on the computer?

    2 have you made any changes to the computer before the show?

    3. What is the exact error message?

     
     
    I suggest you perform the steps described in the document:
     
     
    How to get and install the USB 2.0 drivers in Windows XP Service Pack 1
    http://support.Microsoft.com/kb/329632
     
     
     
    I hope this helps.

Maybe you are looking for