My computer, the screen is only half the size of the screen.

Similar Questions

• HP Envy H8-1549: computer doesn't recognize only half of the new Ram

  Hi all.

  I took a set of ram Ripjaws X 32 gig (4 x 8).  When I install all four chips, only half of them are recognized by the Bios. If I remove two, both of which have not been recognized are visible and working in the same locations they were. It all works, but not all.

  Current configuration: http://support.hp.com/us-en/document/c03666767

  RAM: http://www.newegg.com/Product/Product.aspx?Item=N82E16820231569

  Everything I read on my motherboard and ram has indicated that it is compatible. I updated the Bios and erased the CMS.  I'm a bit of a loss. Am I missing something fundamental?

  What is a tension problem? If so, how can I send it?

  RAM is usually such an easy upgrade. Not so much this time, it seems to me.

  Thank you.

  This seller has guaranteed 8 GB modules for the H8-1549 envy.  The specs are "CL11.

• After the removal of something my computer programs, my screen is only half that it should be.

  Original title: Help

  I deleted something in my add and remove programs on my lap top I think it was the controller ati or something like that, but now my screen is only half what I thought irt was a bug so deleted

  Hello

  You should be able to go up to a previous restore point and do a sytem restore...

  or go here http://support.amd.com/us/gpudownload/Pages/index.aspx

  Concerning

  GT4U

• my Windows xp pro computer was working fine, but after five days, when I stat from my computer I could show only the information of the bios on the screen and then the screen freezes

  my Windows xp pro computer worked fine but after five days, when I stat my computer I could show only the bios information on the screen then the screen freezes, then I started ahead of time the computer starts at mode, but once again he the disply frozen. I couldn't start my computer. I have a lot of data in my hard drive. What can I do to start computer or recover my data?

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors, then your RAM is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• Help! My MacbookPro is super slow (and the HD is only half full)

  I'd appreciate any help as I can get before I have to spend a fortune upgrading to a SDS or increase the RAM memory.

  I have a mid-2010 Macbook Pro (2. 4 Ghz) with:

  -4 GB RAM

  -500 GB HD (219 GB available)

  (Please let me know if any other card would help).

  My laptop is super slow, even with the most basic applications. Even if I did open and simply start Microsoft Word, it will show the wheel rotation for a good minute or so, before the opening. Of opening PDF, preview, and even changing the tabs on Firefox can match the same offset (the degree varies). Nevertheless, it is frustratingly slow, and everyone who uses my computer says this. My friends MacBook which is even older than mine doesn't have this problem.

  Because I do a lot of graphic design work (using Photoshop, Lightroom and various browsers open at the same time) I was told that increase the RAM will help my problem, as would an SSD. While I understand the applications I use are eager for RAM, I can't be certain that this is my underlying problem of laptops, since even simply opening a web page is filled with serious delay (when no other application is open).

  I'm also not sure if an SSD would be helpful since my HD is only half full (or empty depending on what you would look like it). This sounds like a problem with the HD cable? Or any other problem?

  Thanks, I'm a novice when it comes to such things.

  Download and view a report of Etrecheck:

  http://www.etresoft.com/etrecheck

  Ciao.

• HP Officejet Pro 8620 copier copies only half of the document

  During the adjustment of the glass my copier copies only half of the page. When cope since the charger it leaves one side of my page off the coast. I've only had it a few weeks and do not know what to do. Thanks in advance for any help I can get.

  Hello @mburrand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are having problems to copy output.  I'd love to try to help you, but I need some information first. I'm a link a few HP Support documents below that will show you how to find what operating system you are using. In addition, if you are using Windows, please indicate if your operating system is 32-bit or 64-bit.

  Mac OS X: how to find which Mac OS X Version is on my computer?
  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  In the meantime, I recommend that you perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• How can I get the age of Mythology to work on Windows Vista, every time I put the disc in the computer installation screen dosnt pop up and nothing happens

  Moose title: How can I get the age of Mythology to work on windows vista

  every time I put the disc in the computer installation screen dosnt pop up and nothing happens the disc passes just for a bit and stops, and the cursor hangs a bit and I can't get the disk to the computer unless I restart the computer

  Hi rew55545,

  (1) is this problem limited only to the age of Mythology disc?

  (2) what version of the game you are trying to install?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  
  Method 2: run the fixit available in the link below to resolve any problems with DVD player.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• My printer prints only half of the document, even when I try to print a Test Page. Said troubleshooting that have no problem

  Original title: device: printer

  Dear Sir/Madam,

                      
  I am a user of windows from win98, and I never had a problem with the printer that I couldn't solve. But now, my printer prints only half of the document, and troubleshooting said: there is no problem, I printed the rpinter windows test page, but I only got half! in view of this, I wonder if you would be so kind as to send me the solution to my problem, my resources and understanding have exhausted. Thank you in anticipation of your kind cooperation.

  Hi Sergio,

  We would like to ask after the details with you to help you to come.

  (1) what is the brand and model of your computer?

  (2) don't you make changes to the printer settings prior to this problem?

  (3) is the issue limited to any particular document?

  (4) do you get an error when the printer is unable to print?

  You might face this question when the printer drivers are corrupt or if the Windows service does not work properly. Follow the troubleshooting methods listed below.

   

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the link below.

  Why can I not print?

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print

  Check the question and write us with the State of the question. We will help you if you need assistance.

• Only half of the icons showing on personal bar

  Only half of the icons showing on the bookmarks toolbar, but when I go in the toolbar custom, then click on 'Done' they appeared all over again.

  Thank you... I downloaded the latest edition, and that seems to have solved the problem.

• Last night, I did a scan on my computer. He went only 3% when it froze with the server does not.

  Last night, I did a scan on my computer. He went only 3% when it froze with the server does not.

  Can you please explain the concept of what a server is and how can I ensure this does not happen.

  Thank you very much

  original title: Server

  Last night, I did a scan on my computer. He went only 3% when it froze with the server does not.

  Can you please explain the concept of what a server is and how can I ensure this does not happen.

  Thank you very much

  Launched a scan with which product (be specific, up to the exact version)?

  What version and architecture of Windows are you using?

• After turning on the computer, the screen stays black

  original title: fix a black screen

  After turning on the computer, the screen stays black

  It could be that your video settings have been set to a resolution that your monitor does not support.

  You can start mode (repeatedly tap the F8 key during startup key) safe?  Safe mode requires a video resolution supported by all monitors.  If it works, try to change your video resolution settings
  (Control Panel-> display-> (tab) settings.

  HTH,
  JW

• Define a user account already but every time I start my computer the Welcome / logon screen does not appear.

  Original title: user account number.

  I've set up a user account already but every time I start my computer the home / log on screen does not appear

  Hi willy79,

  How many accounts do you have?

  You can check if the Welcome screen is enabled in your computer.

  For more information, refer to this link: to turn the Welcome screen on or off

  Hope the helps of information.
  Please post back and we do know.

• I can read only half of my product key due to wear, but I need to reinstall xp on my hard drive again. How can I get the key?

  I can read only half of my product key due to wear, but I need to reinstall xp on my hard drive again. How can I get the key?

  If you can still boot your old disk, you can use a program such as one of them:

  KeyFinder: <> http://www.magicaljellybean.com/ >
  Belarc Advisor: <> http://www.belarc.com/free_download.html >

  to read the key out of your old system.

  Also note that if you have a system OEM and the OEM installation disks, the key can be incorporated in the installation discs and can not be necessary when your reinstalling Windows.

  HTH,
  JW

• By turning on my computer, the screen is black__I and in turn put off tension several times before will__boot uo__

  Turning on my computer the screen is black
  I turn then turn off many times before, it will be
  Start

  Hello

  Since when are you facing this problem?

  Try the following steps:

  Step 1: Update the drivers for your graphics card.

  Follow these steps to update the drivers for your graphics card:
  a. clickStart, click run, and type devmgmt.msc.
  b. in the list of devices, double-click graphics card.
  c. right-click on the device driver.
  d. click on update driver to open the Hardware Update Wizard. Follow the instructions in the wizard.

  Refer to this article for help:
  http://support.Microsoft.com/kb/283658

  Step 2: Start the computer in safe mode.

  Refer to this article for more information on how to start the computer in safe mode:
  http://support.Microsoft.com/kb/315222

  Step 3: If you can start with success on the desktop in safe mode, then perform a clean boot to verify if a third asks the origin of the problem.

  Refer to this article for more information on the clean boot:
  http://support.Microsoft.com/kb/316434

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to start my computer, the Blue error screen appears saying Stop: 0x0000007B (0x80399BB0, 0 C 0000034, 0x00000000, 0x00000000)

  Original title: cannot start my computer

  When I try to start my computer, the dead Blue error screen appears saying Stop: 0x0000007B (0x80399BB0, 0 C 0000034, 0x00000000, 0x00000000)

  Hi WindowsxpUser,

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  Error message when you start a Windows Vista or Windows 7 computer after changing the mode of the boot drive SATA: "STOP 0x0000007B INACCESSABLE_BOOT_DEVICE".

  http://support.Microsoft.com/kb/922976