My computer will play DVDs, but not with the sound. I need to reinstall a driver?

Similar Questions

• CD - RW drive will play CD but not dvd "Please insert disk".

  drive CD - rw will play CD but not dvd it says: "Please insert the disk".

  It would be like a CD player is designed to play CD to play a DVD, you need get a DVD player.

  DVD players can read DVD and CD, but CD players cannot read CD

• DVD/CD drive will read DVD but not CD

  My DVD player plays DVD but not CD.  Whenever I try to play a CD, the player is a kind of hum noise.  Finally, the Player opens and a popup tells me to insert a disc.

  I tried a system restore and the automated Microsoft fixit tool.  Nothing has worked.

  I use Vista Ultimate.

  Any ideas?  Thank you.

  Hello

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• To play DVD but not CD

  I can play DVD but not CD, what's the problem?

  I can play DVD but not CD, what's the problem?

  ===============================================
  It looks like your optical drive may must be repaired or replaced.

• Can connect to Skype with a single account, but not with the other

  I am able to connect to Skype with my own login but not with the credentials of my friend on his pc. I can however connect with her details as well as mine on my pc?

  You need to upgrade your Internet Explorer to the latest version of IE8 for Windows XP.

  http://filehippo.com/download_internet_explorer_xp/

• All my objects in Indesign are locked. I can move objects with the help of the arrow keys on my keyboard, but not with the mouse. I must have done an order by mistake. Any suggestions?

  All my objects in Indesign are locked. I can move objects with the help of the arrow keys on my keyboard, but not with the mouse. I must have done an order by mistake. Any suggestions?

  Thanks for your help. I work again InDesign brokedown and after a reboot, everything works perfectly fine.

• After being opened for a while (with several tabs) Firefox does generally and repeatedly play a sound - video will play again, but not sound.

  This problem started happening only recently. I often keep my Firefox open all night with sites like rainymood.com or grooveshark.com playing, as well as several other tabs, including but not limited to Facebook, YouTube, and Reddit. Sometimes, after a few hours/days to not restart Firefox or my computer, Firefox starts to become insensitive - i.e., pages take a long time to load, opening new tabs is difficult for the browser and videos will have up to 30 seconds to start playing. In addition, the sound stops playing. If I start a YouTube video, after the initial period of excessive load, the video will play, but without any audio. Also, sites such as rainymood.com and grooveshark, even Facebook, stop sound.

  Note that this is different from an incident of flash plugin - when flash falls down, the audio and video become inaccessible and a simple refresh or restart of Firefox will solve the problem. But what is happening here is different; If I refresh the tab, nothing changes, and even if I restart Firefox, it opens the same way again until I restart my computer completely.

  Also of note: I had, in the past, this same thing happens, but rainymood.com continued to play, however no other tabs would make sound. The problem is sporadic and I don't know where to start. Also, sometimes it's only a problem of Firefox specific, which means other programs on my computer can make sounds, but sometimes this problem makes my computer all stop making sounds, with the exception of Ventrilo, which works, but is also insensitive in the beginning.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• I installed win 7 on old computer continues to crash, but not on the newest one that gave me my dad. It has vista and advise said it will be hanle win 7 64 bit?

  I installed won 7 out of old computer, keeps crashing. just not enough anything to run right. question is this. can I remove between this computer and install it on the newer than Dad has given me everything. It has vista and adviser said that it will load win 7, 64 bit or 32 bit... you just bought a month ago and no disk windows can not afford another one right now. I would like more this month to use... Thank you

  Hello

  If you bought the DVD of Windows 7 with the license, and it's a retail license, Yes, you can transfer it to another computer.

  OEM, pre-installed Dell, HP, etc. as well as Microsoft OEM System Builders licenses are non-transferable to another computer. They are tied to the computer first they are installed on the.

  Retail licenses are transferable. Remember that a single installation is allowed at a time.

  You may need to do a phone Activation when you reinstall on another computer.

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Here's some more information on Windows 7 for you:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  See you soon.

• I can listen to music when I play the DVD, but not what the people say.

  I'm running an Inspiron 1525 with Vista. When I put the DVD to play in Windows Media Player, I can hear the music on the DVD, but nothing that people say. I tried to plug in headphones and readjust the speakers, but I can still hear nothing but the music. This happens on every DVD, but I have no problem with the CD.

  Thank you

  Kathleen

  Hi Kathleen,.

  I suggest you try the following steps:

  Step 1: Change the settings in Windows Media Player volume and control; Follow the steps mentioned in the link below

  Change-volume-settings-in-Windows-Media-Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-volume-settings-in-Windows-Media-Player

  Step 2: Check if you have all parameters related to playback of DVD in the software Sound\Audio that may have installed you.

  Step 3: check if you can play DVDs in Windows Media Center

  Play-a-CD-or-DVD-in-Windows-Media-Centre

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-a-CD-or-DVD-in-Windows-Media-Center

  Step 4: Check if the DVD work fine on another computer to eliminate any problems with the DVD itself.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• CD burner will play CDs but not burn correctly

  I have Dell inspiron 1720 I bought 1 year ago (just in time for the guarantee at the end) and the CD/DVD writer will play media correctly, but when I try to burn CDs of any type they will not play in any stereo at all. When the problem started they would play but a few songs would be crackling, now they don't play at all. My records are closed properly so I tried to download the driver from dell.com, but when I open it, it will not install because it says I need to close applications even if everything is closed. I don't know if it's a driver problem or what, but I need a CD burner, who works for the school!

  
  

• ES1 - 512 hibernate if it is open, but not with the lid closed. LED will blink red and blue?

  I want a laptop, when closed, to go to sleep, then transition to Hibernate.

  When open, transition work. Race walk, sleep, Hibernate.

  When closed, transition fails. Running, sleep (slow orange blinking), and then rapid blue/red flashing LED.
  During flicker battery consumption is large and the battery goes dead quickly.

  I have tried many power configuration settings.

  Cover-> nothing or sleep - same results.

  Cover-> hibernate - works, but is NOT what I want.

  Button to Hibernate, but not what I want.

  I want to do what it should - sleep and hibernation...

  What does glitter blue/red LED mean?

  OK, I found a workaround solution - with a caveat.

  The xHCI driver is apparently in conflict with something that causes chaos when the laptop tries to transition from sleep to Hibernate with the lid closed.

  This is definitely a bug that should be fixed! Acer needs to work with Microsoft to find the problem and fix it.

  If you go into the BIOS settings (reboot and press F2) and disable xHCI.

  The USB ports will return to PCI mode. All USB ports are working, even if I think they are USB 2.0, not 3.0

  Now the power level can be set to sleep when the lid is closed and it will cause a transition to Hibernate when appropriate!

• HP f4480 has worked with dv6 but not with the new dv7 after transfer windows easy

  F4480 will not be printed with the new laptop dv7, I can scan to laptop and the printer works with the old dv6 but it will not print and shows no errors. Print jobs just disappear.

  Have reinstalled several times with the removal of the pilot tool and all the info on this site.

  Me using fixed http://support.hp.com/us-en/document/c02554863 of HP diagnostic tools

  A rather well hidden resource.

• Macaffee blocks legitimate websites but not with the Internet Explorer browser.

  McAfee blocking some legitimate web sites when I use Firefox, but not when I use a browser IE.

  Hello bobbrue, you have several malicious extensions present in your profile.

  • first of all I recommend you to reset firefox
  • run a full scan of your system with the security software you have in place and various other tools such as the free version of malwarebytes & adwcleaner.
  • Finally, after you have completed the steps above please report back in the forum and include troubleshooting information then in force, so that we can have a final check that everything in your profile looks clean.

  Thank you

  Fix Firefox problems caused by malicious software

• Missing lines in print Outlook calendar, but not with the PDF printer

  Hello

  I bought a HP Officejet 6700 Premium [H711n], but from the beginning, when I print my weekly calendar in Outlook there are missing lines in each nomination.

  My system:

  The system is HP Officejet 6700 Premium (all updates, driver ver: 9.0.0, usbscan.sys worm: 6.1.7600.16385, HPScanTRDrv_OJ6700.dll worm: 25.0.614.0, HPWia2_OJ6700.dll ver: 24.5.276.0), and Windows 7 SP1 32 bit (all updates), as well as Microsoft Outlook 2007 SP3 (all updates). The system is connected to the printer via USB, no WiFi or so.

  My problem:

  When I print my weekly Outlook calendar with my new Officejet, the upper and the bottom lines in all appointments is missing. I did a few small arrows in the photo, to show that appointments block timelines. (see scan & Outlook screenshot).

  

  (a) when I use my printer with Outlook to create a PDF file of my calendar, the exported PDF file is perfect. If I CAN open the PDF file with my Viewer and print calendar with my Officejet page, printing looks like it should look like. (see screenshot)

  

  (b) my old man, but broke a LEXMARK C530DN printer, print the pages of the calendar always correctly.

  My settings:

  Given that I bought and installed the printer a few weeks ago, I changes nothing on the HP driver settings. It is plain vanilla. The problem was there from the beginning. I tried once to solve it by changing the quality of "normal" to "optimal", but it did not help, so I put it back.

  Other printing problems:

  No, everything worked except the Outlook calendar printing.

  According to me, these are enough detail to reproduce the issue easily.

  Any idea outside workaround with my pdf printer? Maybe there something wrong with the driver HP itself? (Just an idea...)

  Best regards

  Michael

  Hi Raysy,

  Still having problems?  The suggestions helped?

  Kind regards

• WRT160N works, but not with the internet

  Heya!

  We have the WRT160N for a little while now and until a few days ago, it worked very well!

  A few days ago, the internet on our homenetwork started have really very slow and even 1 pc cannot connect at all.

  So we decided to give the router a hard reset.

  After that we did it, the network is back (our wireless network is not protected, but we'll fix that soon after we had it working again).

  Only, we do not have operating... We returned our network so we can use the maps shared on all computers, but internet has disappeared!

  We got 1 pc near the Modem, so we connected the pc to the modem and it got internet right away!

  Then we plugged the modem to the router again once and then beautiful blue light on the logo 'internet' on the router and everything was going on well again.

  Unfortunately, it was not. The internet still wasn't back! local network available on all PCs!

  So in short:

  After resetting the WRT160N, we could only use the LAN, so is not the internet. While the router itself says it has internet (it is connected to the moedem correctly).

  Things you should know:

  -We do not have internet on our modem, PCs that are connected directly to the modem have no internet

  -the cable between the modem and the router is not broken, we have tried other cables but same problem

  -We also made the modem, then turned the router, that rekindled the modem and then the router back, still nothing happened

  -Now we plugged our selector of ould (Wireless-G) back on, and it immediately starts to work OK!

  So please...! What is the problem with the WRT160N? We have forgotten something after the reset? We need to define a configuration somewhere? Maybe its broken?

  TNX for the answers already!

  Your router lost its configuration after you have reset it... You need to reconfigure your router now...

  If your Internet Service is cable follow this
  If your Internet Service is DSL follow this

  SE if you can connect to the internet now...