my computer windows 7 has stopped giving me my windows updates

Similar Questions

• InDesign CS4 using on iMac. EU to restore the backup computer. Licensing has stopped working. 150:30 error code. How can I restore my license?

  InDesign CS4 using on iMac. EU to restore the backup computer. Licensing has stopped working. 150:30 error code. How can I restore my license?

  You must install the Adobe programs since the original installation programs. Never migrate from a backup.

  Activation Adobe should detect a computer when the material has not been changed.

  If this isn't the case, you must contact Adobe support.

• Receive the error "Windows has stopped working" after installing the update of security for Vista (KB977165)

  I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.

  This happened to someone else? Is it I can do it fix it?

  Hello

  Since you get such a serious mistake, I would use the free incident reports.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Desktop Window Manager has stopped working after loading of updates 12/10/10 MS

  Once the download and installation of updates for Windows 12/10/10 patches, Desktop Window Manager has stopped working.  Event viewer lists under Applications:

  Name: Application
  Source: Application error
  Date: 2010-10-13 09:59:47
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: has
  Description:
  The failing application name: Dwm.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc541
  The failed module name: nvwgf2umx.dll, version: 8.17.12.5922, time stamp: 0x4c5424d5
  Exception code: 0xc0000005
  Offset: 0x000000000007c160
  ID of the process failed: 0xb0c
  Start time of application vulnerabilities: 0x01cb6aefa117a51c
  The failing application path: C:\Windows\system32\Dwm.exe
  Path of the failing module: C:\Windows\system32\nvwgf2umx.dll
  Report ID: e6dfd048-d6e2-11df-9660-00271383b7fe

  The operating system is Win 7 x 64.  Video card is a Gigabyte GTS450OC1 with its latest driver running on an Intel DP55KG MB with 8 GB memory Corsair XMS3.  The system was fully functional and stable immediately before the update.  I don't know which of the 18 patches is in conflict with the nvwgf2umx.dll file.  Device Manager reports no hardware problem with any component.

  In my attempts to solve the problem, I run chkdsk f, sfc/scannow (which have reported no problem) and reloaded the video driver (without uninstall first).   Nothing works so far.  I even tried to defragment the master file with Diskeeper 2010 start time Table Defragger (based on another post, I've found), also without success.

  What is the reference for this?

  This may seem like the thing the more janky to post, but I got the same error several months:

  Problem event name: APPCRASH

  Application name: Dwm.exe

  Application version: 6.1.7600.16385

  Application timestamp: 4a5bc541

  Fault Module name: nvwgf2umx.dll

  Fault Module Version: 9.18.13.1422

  Timestamp of Module error: 51427a 68

  Exception code: c0000005

  Exception offset: 000000000013fe0b

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 1033

  Additional information 1: bd9d

  More information 2: bd9dfb84ef7bbf0c089fd3d5f079469b

  Additional information 3: ec39

  Additional information 4: ec39233315f018bea3fd5d4de7e9458f
  And could not cancel the record/re-record the dll it error out on an entry point missing or whatever.
  So what for some reason any worked for me is to rename C:\Windows\System32\nvwgf2umx.dll to nvwgf2umx.dll.bak (all other copies of this file are in the folder DriverStore).
  After that, I ran from an administrator command prompt
  net stop uxsms
  net start uxsms
  
  
  And miraculously all started working again.  I'm running a GTX570 with latest drivers nvidia from Scripture.
  Note: You probably shouldn't be move/rename things in System32 unless you are confident and have your data backed up.  It worked for me, but who knows you.

• My bi-ecrans Setup has stopped working with the latest update of Windows

  My bi-ecrans Setup has stopped working since the last windows update.  The second screen is relegated to never turn on and in the part 'View' of the Control Panel, I can't change the 2nd monitor resolution of anything in addition to 480 x 640.  I installed the latest drivers for the video card and two monitors.  I have everything down, powered, entretienavec left for a few minutes and fed up, nothing.  It has been like that for a few days now.  Any advice would be very useful,

  Thank you

  Tyler

  Details:

  PC: HP Compaq 8200 Elite

  Graphics card: AMD Radeon HD 6500 Series

  First monitor: ViewSonic 2030

  Second monitor: Dell 1908FP

  All pilots are underway according to Dell, ViewSonic, AMD and Microsoft.

  Latest patches from Windows Update killed my dual Setup monitor:

  Update of security for Microsoft Office PowerPoint 2007 (KB2596764)

  A security update cumulative for the stop bits ActiveX for Windows 7 for x 64-based systems (KB2618451)

  X 64-December Windows malicious software removal tool (KB890830) 2011

  Update security for Windows 7 for x 64-based systems (KB2620712)

  Update of security for Microsoft Office PowerPoint 2007 (KB2596912)

  Update for Microsoft Office Excel 2007 (KB2596596)

  Update of security for Microsoft Office Publisher 2007 (KB2596705)

  Update of security suites for Microsoft Office 2007 (KB2596785)

  Cumulative Security Update for Internet Explorer 9 for Windows 7 for x 64-based systems (KB2618444)

  Updated for suites Microsoft Office 2007 (KB2596651)

  Update security for Windows 7 for x 64-based systems (KB2639417)

  Updated for suites Microsoft Office 2007 (KB2596789)

  Update security for Windows 7 for x 64-based systems (KB2619339)

  Update for Windows 7 for x 64-based systems (KB2633952)

  There is no update stated in your post which could have implications on your graphics card, or its driver.

  Have you installed the latest graphic driver AMD in the AMD site?

  http://sites.AMD.com/us/game/downloads/pages/radeon_win7-32.aspx

  NB this link is the 32-bit win7 driver.

• My Dreamweaver Mx2004 (part of StudioMx2004) can be installed on my new computer, as Adobe has stopped servers.

  Hello

  I changed my computer because of the end of XP support.

  I got an old HTML site with over 5000 pages with Dreamweaver Mx2004.

  When I tried to move my Dreamweaver from the old computer to the new, no way... Adobe has stopped former servers used to probe the licenses.

  I'm fighting half a day to find a way to communicate with someone at Adobe France. They do everything to stay hidden. Difficult to find a phone number. So lots of time to bad listening music on the phone.

  In the end, a friendly wonan told me that I can download Creative Suite CS2 to replace my good old software (which has been paid on the way; I read the license: there is no time limit).

  But thin so! No Dreamweaver! I really need.

  What can I do?

  Concerning

  First of all, if your operating system can even support MX 2004, which is now 14 years old and more, you need to install the software, do not move.   Second, you must use the new serial number on the link below.

  Error: Cannot activate | Macromedia products

  Nancy O.

• Error Windows update cannot currently check the updates because the service is not running, you must start the computer, windows update services does not

  Original title: Windows Update service is not running / working and is not listed in services.msc

  When I go to windows update a red shield with a white cross appears and when I click search for updates this message appears:

  "Windows update cannot currently check updates because the service does not work, you will need to start the computer"

  * Restared several times-nothing has changed

  Despite what other threads have advised to:

  I checked in the services and WINDOWS UPDATE, Background Intelligent Transfer Service or encryption services are not listed!

   

  * I have changed the settings to "Never search updates" and then back to "install updates automatically" - nothing has changed

  * I ran the Malicious Software Removal Tool http://www.microsoft.com/security/pc-security/malware-removal.aspx- we say that everything was ok, but I can't always verify updates

  * I ran the download to reset windows update components http://support.microsoft.com/kb/971058/en-us but still I can not check updates

  (Nothing is in the update history)

  Am really worried!

  Thank you!

  Hello

  
  Have you made changes on the computer before this problem?
  Method 1:
  You can try to start the fix - it and check. Check out the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Method 2:
   
  You can read the following article.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.

  Method 3:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

• Weather app has stopped working after the recent update of store

  Recent update of the store windows caused the app to stop working.  It shows the current weather, but when you try to access the application that need you right back to the start page.  I also noted the presence even when app stich (Evernote) also recently installed II, he returns to the start screen and does not open.

  Hello

  We appreciate that you gave us an opportunity to answer the question that applications do not work after you have installed the Windows Update.

  Please follow the steps and check if that helps.

  Method 1: Run App troubleshooting utility.

  Download and run the troubleshooter modern UI App and check.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 2: I suggest you try the steps from the following link:
  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Method 3: check the Date & time zone.
  Follow these steps to change the time.
  a. double-click the current time on the lower right of your screen.
  b. then click time change date, and then click change time zone.
  c. Select your time zone and check automatically adjust the clock for the time, then press OK.
  d. press on apply, then OK.

  Method 4: check if you have the same attention to clean boot.

  Please see the link to place the computer in a clean boot.

  http://support.Microsoft.com/kb/929135

  Please note: after troubleshooting, be sure to start your computer in normal mode by following step 3.

  I hope this helps. Please get back to us if you have any other questions. We are here to help you.

• Illustrator CC has stopped working (after the last update)...

  Hello

  I get the following message "Illustrator CC has stopped working... "when I now try to run the program. It was only after the new update of the Illustrator. I uninstalled Wacom Cintiq HD 13 from the PC. Has no change.

  Any help please? Thank you.

  --

  Windows 8, Version 6.3 (Build 9600)

  Name of the failing application: Illustrator.exe, version: 18.1.0.430, time stamp: 0x54247b91

  Name of the failed module: Illustrator.exe, version: 18.1.0.430, time stamp: 0x54247b91

  Exception code: 0xc0000005

  Offset: 0x000000000013920a

  Process ID vulnerabilities: 0x3d8

  Start time of application vulnerabilities: 0x01cfe32da5a29313

  The failing application path: C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\Illustrator.exe

  Path of the failing module: C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\Illustrator.exe

  Report ID: e519a0fe-4f20-11e4-82a4-74d435809d3b

  Faulting full name of the package:

  Hi Sumit,

  Thanks for your quick response.

  No I have not any suitcase software installed. Does jogging but my memory and I got some trial graphic clever plug-ins installed, which had expired recently.

  Uninstalling all these now let Illustrator launch. Therefore, it seems to work.

  I'll install the Wacom tablet program later. I suspect that it will be fine.

  Thank you.

• I can't update my computer .windows updated.i have .and sevice pack 2 32 bit.

  SOMEONE HELP OUT ME... I can not updated my computer.i have have window xp and only 32 bit... and service pack 2.i just keep on getting errors after errors.i windows update cant, I try I get error... everything what I'm trying to download .i get error again.and I can't internet explore 8 .to .i download that.it gives me error for upated my Windows.vous can also send me an e-mail to * E-mail address is removed from Privacy * too.thank you...

  You can download the SP3 directly from here.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Once you have upgraded to SP3, then try to get the rest of the required updates (there are MANY).

  I hope this helps.

• WebGL has stopped working since the last update of NVIDIA drivers. Decommissioning of the pilots did not help. WebGL is enabled, but it does not compile shaders and fail.

  I use Firefox on Ubuntu 12.04 49.0.2. Until a few days ago, WebGL worked. A few days earlier, it has stopped working (one day after I installed the latest version of the Nvidia drivers). I tried the option "enable force", without success. WebGL context is created, but debugging, it looks that the shader is not compiled (so made is not possible). I already tried to change the options on the angle, without success. I tried to downgrade the graphics drivers and their modernization once again, without success.

  My nvidia drivers are version 304.132 (latest version)

  OK, solved. The problem is caused by a bug in the NVidia driver, as shown here:

  http://UNIX.StackExchange.com/questions/321185/after-update-GLX-works-only-for-root-NVIDIA/321339

  After decommissioning, everything worked fine

• When I've upgraded to Firefox 4 my Firefox has stopped working. I've updated with each version of Firefox since now I am up to 9 Firefox doesn't always after that upgrade to firefox 9 check Add on window open and froze.

  I also cannot use my Internet Explorer

  See this support article - difficulty of problems connecting to websites after Firefox update

• new faucet botton has stopped working after a few updates

  Hi, FireFox has had a few updates for IDM modules as usual, but after he (new tap botton) stopped working, even the new tap since the right-click option does not work, please help

  Uninstall the toolbar Ask and it should work again. There is a compatibility issue with the Ask and Firefox toolbar that prevents the opening of new tabs.

  There are a few places to check for the Ask toolbar:

  • Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
  • Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

• WordPad has stopped working after the latest updates

  After that received several updates this morning, Word Pad stop working. When I open it, I get an error message saying... "unable to create the new document.

  Can someone tell me how to solve this problem? It was working fine just before the updates.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everyone your event to your OneDrive Viewer Application copies of your System and logs and post a link here.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• Vista and Solutions problem reports: "a problem with PSIKey. PSIKey has stopped working properly. An update is available that solves this problem. » __

  I downloaded the update from the site Web of Protexis Inc., but still the warning returns to every start. What can we do?

  Sounds like the program still has problems.  Protexis would need to provide an update of the program that doesn't crash.  Consider uninstalling the software and reinstall the latest version, or contact the manufacturer of the software for further assistance.