My 'deliverables' folder contains many files "appName.debug", do I remove these?

Similar Questions

• Can I set up a folder with many files and give only a limited number of people access? Just as in the old system.

  Can I set up a folder with many files and give only a limited number of people access? Just as in the old system.

  Hi oliviner,

  If you are referring to the workspaces, then yes it is possible but the service will be removed in January 2015

  If you are referring to files.acrobat.com, so if you can create folders and put the files into it, but you cannot assign access to specific people as you could in workspaces.

  Kind regards

  Rave

• Using the stand-alone converter 5 with entry as local windows 7 in vmware fusion 4 output, the output is a folder with many files. How can I get this folder into a single file with the extension windows7.vmwarevm?

  I use standalone converter where I am converting my local windows 7 in vmware fusion 4 at the exit. When I made the migration wizard previously, I had an output of a windows7.vmwarevm file. However, when I made the converter, I had a folder called windows7. In this case, I had several files.

  Is there a way for me to convert all these files into one file, that is to say: windows7.vmwarevm? do I need to use the converter or other vmware tools?

  Welcome to the community,

  Please take a look at Re: how to convert a package/package of my folder on drive hard/vmware fusion? to see if that helps. This is a pretty old post, but I think that it is still valid.

  André

• Is it possible to prevent or remedy to have too many files in the DCIM folder?

  Is it possible to prevent or remedy to have too many files in the DCIM folder?  In a group of friends, when you view folders DCIM iPhone in Windows 8, three of us have many, many files (such as 101APPLE, 327APPLE, 328APPLE).  Phones concerned: 5 c, 6: 6.  Some have only one photo per file, some files have just a few pictures.  In addition, two friends have files dated 1969.  I think everyone has the most current ioS. What is the cause and is at - it a way to overcome it?

  No, it isn't. The DCIM and its content was never for public use to shoot photos and videos.

  Here's the right way to go about it.

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

  If you want something more specific Windows, I suggest you watch here.

  http://Windows.Microsoft.com/en-us/Windows-8/import-photos-videos

• Windows Explorer is restarted when you browse the folder that contains the file huge (more than 4 GB for example HIDEF mkv files)

  I use Windows 7 Ultimate x 64. I found that when I review the folder that contains large files (more than 5 GB each, for example the HIDEF mkv files), Explorere.exe stopped working and restart.

  However, I can open these files when I open them directly from the program (i.e. KMPlayer). Here are 2 events after restart and Explorer.exe crash. I got them from event viewer

  I am facing this problem in Mode safe too!

  PLEASE HELP T___T

  ++++++++++++++++++++++++++++++++++++++++++++++++++++

  Log name: Application
  Source: Application error
  Date: 3/2/2553 06:46:01
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: beersonic-PC
  Description:
  The failing application name: Explorer.EXE, version: 6.1.7600.16450, time stamp: 0x4aebab8d
  Name of the failed module: qedit.dll, version: 6.6.7600.16385, time stamp: 0x4a5be02b
  Exception code: 0xc0000005
  Offset: 0x000000000006bb73
  ID of the process failed: 0x133c
  Start time of application vulnerabilities: 0x01caa461b0159e53
  The failing application path: C:\Windows\Explorer.EXE
  Path of the failing module: C:\Windows\System32\qedit.dll
  Report ID: 1dd76da9-1055-11df-a980-00195bd2573a
  The event XML:
  
   
     
      1000
      2
      100
      0 x 80000000000000
     
      12147
      Application
      beersonic-PC
     
   
   
      Explorer.EXE
      6.1.7600.16450
      4aebab8d
      Qedit.dll
      6.6.7600.16385
      4a5be02b
      c0000005
      000000000006bb73
      133C
      01caa461b0159e53
      C:\Windows\Explorer.exe
      C:\Windows\System32\qedit.dll
      1dd76da9-1055-11df-A980-00195bd2573a
   
  

  +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

  Log name: Application
  Source: Windows Error Reporting
  Date: 3/2/2553 06:46:12
  Event ID: 1001
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: beersonic-PC
  Description:
  10675835, 4 the fault type bucket
  Event name: APPCRASH
  Answer: No available
  Cabin ID: 0

  Signature of the problem:
  P1: Explorer.EXE
  P2: 6.1.7600.16450
  P3: 4aebab8d
  P4: qedit.dll
  P5: 6.6.7600.16385
  P6: 4a5be02b
  P7: c0000005
  P8: 000000000006bb73
  P9:
  P10:

  Attached files:
  C:\Users\beersonic\AppData\Local\Temp\WER168C.tmp.WERInternalMetadata.XML

  These files are available here:
  C:\Users\beersonic\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Explorer.EXE_f03929de6e484ca527e71d77fa7726e518545eb_117b41d0

  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: 1dd76da9-1055-11df-a980-00195bd2573a
  State: 0
  The event XML:
  
   
     
      1001
      4
      0
      0 x 80000000000000
     
      12148
      Application
      beersonic-PC
     
   
   
      10675835
      4
      APPCRASH
      Not available
      0
      Explorer.EXE
      6.1.7600.16450
      4aebab8d
      Qedit.dll
      6.6.7600.16385
      4a5be02b
      c0000005
      000000000006bb73
     
     
     
     
     
  C:\Users\beersonic\AppData\Local\Temp\WER168C.tmp.WERInternalMetadata.XML
      C:\Users\beersonic\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Explorer.EXE_f03929de6e484ca527e71d77fa7726e518545eb_117b41d0
     
     
      0
      1dd76da9-1055-11df-A980-00195bd2573a
      0
   
  

  +++ RESOLVED +++

  I found the problem...

  "Haali splitter" program has a function to display MKV and MP4 as a thumbnail in Windows Explorer. What Windows Explorer crash when I open the folder with MKV huge.

  Thank you all,

• STEAM will not install. Fatal Error 1324; The folder path ' Program Files (x 86) contains an invalid character. How to fix this?

  I can't play any of my games, because STEAM refused to install... I have used their Web Site and my records... the results are the same... the same fatal error pops up...

  From the other thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-gaming/error-1324-when-installing-steam/d9515071-2fc1-405c-875a-8fd6bca91930

  Title: ERROR 1324 When STEAM plant

  I tried to install STEAM via the WEB and game discs (games include Civilization V, Napoleon - Total War & EMPIER - Total War)

  Program runs until the WIZARD of INSTALLATION of STEAM... as soon as I received an ERROR 1324. The fold path ' Program Files (x 86) contains an invalid character. It does not specify which file or which character is not valid. I tried several registry cleaners... no luck. There is nowhere any folder on the computer for the Valve or STEAM...

  I disable the security & firewall and still get the same results... The installer of Steam does not work... Help?

  Hello

  Have you contacted https://support.steampowered.com/newticket.php to help?

  Thank you!

• Is there a limit for research on the function of advanced search for files containing text matching. My search always ends with 500 discoveries but the folder contains several PDF files that match the criteria.

  Hello

  Is there a limit for research on the function of advanced search for files containing a text match? My search always ends with 500 discoveries but the folder contains several PDF files that match the criteria.

  Hi carls76936091,

  Open Acrobat, go to the Edit-> Preferences-> search & check if there is a limit to 500 set, in case if it is to increase it please.

  Kind regards
  Nicos

• Now that my full FCP project, I burned a dvd and everything is fine but I want to download the .mov on YouTube, but cannot determine WHICH of the largest number is the one to download.  Too many files are named "Untitled" and I can't find a post of .mov

  Now that my project from FCP 5 minutes video clip is over, even if I am a complete and total novice to the iMac, I nevertheless managed burned a DVD via the file > share the menu option and everything went well, but now I want to download the .mov on YouTube, but is unable to determine to WHICH many files created in this project is the one to download!  It seems that many files are named "Untitled" and I do not seem to know how to find ONE with a .mov extension.

  At the top left of my screen of the FCP is the list of "Libraries" that after that I developed all the arrows to point down looks like this:

  Libraries

  Untitled

  Smart collections

  30/06/16

  Age of television

  If you haven't guessed, the name of my project is "T.V. Age" and I expected to find somewhere on the computer, a file named, 'T.V. Age.mov' or somethjng like that for me to download on YouTube, but I can't find THE .mov files.  Maybe I don't know how to market the Finder option to display filenames WITH extensions?

  I'm hoping that someone with enough time on their hands and understanding in their hearts will take the time to help me locate the .mov that as well as help me correctly name this library Untitled in the zone without good libraries course disrupt the integrity of the completed video-music that is always open on the timeline, even if I don't there anymore since my work with her is over , but the only "CLOSE button" I see is 'close library Untitled' button on the file menu.  I don't see even its end (the *) project button!  The only way I see how close my project is to close the program, but I doubt if it's true.  Any help will be greatly appreciated.

  Tony

  If you did burn a DVD, then you did burn a DVD, you export any file can be used.  Share > main folder > Audio + video and download that ProRes file resulting.  Or use the built-in YouTube option to upload directly to YouTube.

  You don't "close" anything in the part of the timeline, it is useless.  You would simply open a new project or other media type of container, in the part of the timeline.

• In Win 7 I get an error for various leave and- or "this action cannot be completed because the folder or the file is open in another program."

  I'm money than Win 7 Home Premium 64-bit SP1. The following information are linked to the steps to solve a persistent problem. Please read carefully and answer completely, since you asked users to report carefully on the long process of troubleshooting-advice you provided. I've been at it for six hours now in this round of troubleshooting.

  I tried to solve the continued permission errors and- or "this action cannot be completed because the folder or the file is open in another program."  This happens when attempts to cut-copy-paste------delete files (including the specific details listed below).  I searched on the Microsoft Support site to find answers to solve the problem, including the thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/in-Windows-7-getting-error-the-action-cant-be/449b2e05-8ED0-4A72-98bd-dde430d27e10?TM=1356626412321

  In accordance with this notice of sons, I emptied my Temp folder. The problem persisted. I downloaded the app 'Take Ownership' and also tried with periodic and sporadic success. It seemed to lengthen the time between recurrences of the problem - that it would allow me a half a dozen of all cutting------copy-paste and------or remove actions, until the error messages stop me to exercise that or any other action.  Then, I used the task Mgr end explorer.exe and reopen it to see if that makes a difference. For a while it worked, where I could make a few cut sporadically------copy-paste and------or delete actions. Today I'm at the point where I can preform one action, then I have to open task Mgr, end explorer.exe and then restart it to perform again a more cut-copy-paste or delete action. So, I have to return to the task Mgr and repeat the process above, for each new action I want to perform.

  I watched rained down in the above quoted thread, and followed Support Engineer Samhrutha G troubleshooting tips - method 4 - start the computer start-up in minimal mode and to use the diagnostic selective startup. In previous discussions, you have asked for advice as to what you were doing when the problem occurs, so I rated as below:

  I went into msconfig, unchecked "Load Startup items", went to the tab Serivce and allowed only half of them. He was 12 of 24 listed entries. During the tests, programs that are only open on my desk were two windows explore and Notepad to save the results. I got the following results:

  I moved the contents of a folder on my main C drive on my external drive of 3 TB. When I then tried to remove this folder on my external hard drive I got the message

  "You must be authorized to perform this action."

  You need authorization S-1-5-21-602162358-602609370-839522115-1004 to make changes to this file.

  After I clicked retry the record has been deleted. When I went to delete another folder in the same location on my external hard drive, he deleted the first time. He was then three other orders normally external hard disk.

  Then I tried to delete a file in a different location on the external hard drive and the message

  "You need give permission to delete this folder.

  When I clicked on continue what he deleted

  I cut and pasted a file from my external hard drive to my C drive. The record stuck on drive C. He pasted the folder on drive C, but the original folder remained on the external hard drive, even though it was a cut and paste. So when I went to delete the original folder that should have been cut, this message came:

  "You need permission to delete this folder.

  When I clicked on continue he grew up:

  ", You need permission to perform this action."

  You need authorization MYCOMPUTERNAME\MYCOMPUTERNAME to make changes to this file.

  When I clicked Try Again he deleted. But why he would leave the original behind if it was a cut and paste?

  After that, I tried to cut and paste a file to a location on the external external hard drive to another location on the hard drive, after I had seen the contents of that folder and went up a level to the folder parent to try the cut and paste. I received the following message:

  "Cannot perform this action because the folder or the file is open in another program

  Close the folder or file, and then try again.

  When I clicked Try Again it just repeat the error message, don't not allowing me to carry out the action and any other further reduction-copy paste and- or delete actions. I had not opened or closed all other folders, windows or applications, during the above test.

  Based on the Support Engineer Samhrutha G troubleshooting tips 4 method found on the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/in-Windows-7-getting-error-the-action-cant-be/449b2e05-8ED0-4A72-98bd-dde430d27e10?TM=1356626412321

  (same thread as cited previously) Then I went into msconfig > Services and reduced the number of items in the selective startup of a unit, as I started 11 - instead of 12 - 24 listed entries. Upon reboot, I decided to re - check msconfig. In msconfig > Services he showed 165 points. All had a check in the box next to them. These 165 points, 56 showed as "ongoing" the rest showed as stopped. It would be useful that I specifically what were these 56 entries?

  I continued with the troubleshooting test based on these settings initiated by Support Engineer Samhrutha G tips to reduce the selective startup (remember... it was 11 selected items)

  I started by I try to copy / paste a file from my external hard drive to my C drive. He has successfully completed. When I went back to the location of the original file on the hard disk external and clicked on undo move, the message came:

  "You need give the administrator permission to move this folder.

  When I clicked on continue as he moved the folder

  Then I tried to cut a file on the C drive and stick it in my external hard drive. He successfully completed the task. I then went back to the original location of the file on the C drive and tried to "Undo Move". I received the following message:

  "You need give the administrator permission to move this folder.

  By clicking on continue he grew up

  "You must be authorized to perform this action."

  By clicking on try again, just to repeat the error message and could not undo the move

  I tried to cut the entire contents of a folder on my C drive and stick it in a directory on my external hard drive. He was able to make the cut and paste but left a folder and two files back in the original location on my C drive. When I then went to cut the 3 elements he missed and move them to the location I had initially indicated on my external hard drive - for the first file he brought up in the dialogue that he was already stuck and I would like to merge, etc, that I clicked on none. the second file in the sequence that he grew up:

  "You must be authorized to perform this action."

  When I clicked on continue he grew up

  "You must be authorized to perform this action."

  You need permission from the administrator of the computer to make changes to this file.

  When I clicked on Try Again, he said.

  "Cannot find this article.

  It is no longer in C:\Projects\FolderName. Check the location of the item, and then try again.

  When I clicked Try Again he repeats just this same error message until I had to click Cancel to exit.

  The record was then only showed only two remaining elements. Because the first cut and paste involved 22 files and 3 folders, now I am unable to say which of them got ignored or lost. When I updated the location of the original files he showed that a single folder on the left and the content was empty. When I checked it now duplicated and pasted to the location of this folder on the external drive, he was there with the appropriate content. So he had left this file to the original location, but it was empty. Why this erratic behavior?

  When I went, then, remove this folder remaining from the original location, he deleted successfully. If you understand the above message, you notice that a file has disappeared.

  I now need to mention an incident b4 I started the process of solving problems today. I felt that you needed some context b4 I mention this. I had tried to cut a folder that contains 33 files and 6 records. The six files contained two subfolders whose combined total content contained 28 photos - a mixture of mp4, JPEG and mp3 - for a total of 61 files in the parent folder, I tried to cut and paste. I tried to paste the folder parent on my external hard drive. He started at the cut and paste normally 7.04 GB and towards the end, I got the message

  "Cannot perform this action because the folder or the file is open in another program

  Close the folder or file, and then try again.

  He was unable to finish when I clicked on Try Again, and I had to cancel out. However, he had removed all but one of the folders containing three files and it was not pasted into the new location. They were gone. I did a search on Win for some of the names of known files in this folder, and none appeared. Fortunately I had them on a second external drive. I plugged it to restore files, and of course that means more open task Mgr, ending explorer.exe and reopen in order to restore the files that explore had lost.

  After my results displayed above two rounds of by using a clean boot and selective startup, you can see that it is very difficult to actually diagnose the problem because it happens inconsistently. It is also very time consuming and very, very, very, very, very frustrating.

  I decided to try the method of disabling "just" thumb caching in the registry according to the advice of Robert P in the thread quotes. He said that I should go to Start > Run > gpedit.msc and "disable implementing caching thumbnails in hidden thumbs.db files" that was published of course in OK Win 7 > files, folders, and storage of the Microsoft Community forum. So I typed gpedit.msc in the search bar, and there was no instance of gpedit.msc, only setup.exe, I had to take was to gpedit.msc.  I installed it and after installation I typed again and he has not yet posted. So I rebooted. Restarted it showed up. When I went to run gpedit.msc, he brought to the top of the window with the error message group policy "MMC could not create the snap" when I looked up this article in the Microsoft Community, I found the link to the Win 7 forum, where the Star NIthyananda reported community
  "Gpedit.msc is not available in Windows 7 Home premium.  Discussion here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/when-i-open-gpeditmsc-on-my-computer-which-is/b1576a0f-348a-49D8-be70-d83d0f36e8aa?tab=AllReplies#tabs

  He then mentioned

  "If you want to disable caching of thumbnails, you can access the registry editor and go to changing the location according to the value [note: its mine incorrect grammatical syntax and not]".

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DisableThumbnailCache ".

  with no information on how actually access HKEY_CURRENT_USER

  I found the appropriate information on how to access the registry in Win 7 running regedit, with information on how to navigate to the appropriate location in the registry to disable the thumbnail cache

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DisableThumbnailCache

  but there is no entry "DisableThumbnailCache.

  I researched and found that you can add it in

  http://www.SevenForums.com/tutorials/10794-thumbnail-cache-enable-disable.html

  I downloaded the Disable_Thumbnail_Cache.reg file. After running Disable_Thumbnail_Cache.reg to merge it into the registry, I then returned to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\

  and yet, there was no entry on DisableThumbnailCache

  The second method mentioned in

  http://www.SevenForums.com/tutorials/10794-thumbnail-cache-enable-disable.html

  has been to access via the Group Policy Editor

  I searched for the Group Policy Editor in Windows 7 search bar and it showed three entries

  A folder titled "for Windows 7 Group Policy Editor.

  a zip file named "add_gpedit_msc_by_jwils876_d3kh6vm.zip".

  Setup.exe

  The "Group policy for Windows 7 Editor" folder contained just the same two files listed below it

  So, I went ahead and ran the setup.exe and then restarted. After the reboot, I did a new search for the Group Policy Editor and he grew up just three results.

  I went back on the WindowsSeven Forum and found advice in the thread

  http://www.SevenForums.com/tutorials/3652-local-Group-Policy-Editor-open.html

  Title: how to open the local Group Policy Editor in Windows 7

  The tips were:

  To search for a group policy or the registry key, value, etc., see:

  Political research group

  The link above leads to:

  "The GPS is going to move to a new end area January!

  http://gpsearch.azurewebsites.NET
  You will be redirected in 15 seconds! »

  I waited about 3 minutes and it went nowhere, so I clicked on the http link and he grew up:

  GetCategoryDependencies() - 500ServerError

  This is where I could and I am now. And I can't "simply" disable caching of thumbnails. Can I return to my workspace and all simply continue with the editing work that I do, which is to cut, or -copy-paste and or delete files that I advance in my workflow. I can't do it without opening task and then Bishop ending and re-open explorer.exe for each order, I want to achieve.

  At this point now a few hours later including writing this message, I think that a new facility would be easier, more rapid and less headaches but that will solve the problem?

  Sense my frustration?  If this is not the case, let me make it clear. It's extremely frustrating. Why Windows doesn't have a fix for this is an error permanently?

  It was mentioned in the original thread that I cited that it would be better to start a new thread and continue to add my comment to the answers already posted 138. This problem has plagued me for months. Please notify

  As you have tried many fixes and changes to the registry, I suspect that your only option is a clean installation

  And having done so don't try not to cut/copy anything other than the data in the files in libraries in any other player. Copy of records of the victory Road will result in the registry locations becoming screwed.

  And if you really need locate the lbraries on another drive will redirect the location of other libraries that animate

• Hi, I use iTunes 12.3.2.35 on a Windows 7 computer. I don't seem to be able to import files from a CD that contains the files on it as mp3 files. If I launch iTune and then put the CD in, it doesn't appear and I can't drag and drop.

  Hi, I use iTunes 12.3.2.35 on a Windows 7 computer. I don't seem to be able to import files from a CD that contains the files on it as mp3 files. If I start iTunes and then put the CD in, it doesn't appear and I can't drag and drop.

  It would not seem like an audio CD, as a drive in this way is a data disc when it contains mp3 files. You would need to access the file menu in iTunes, manage files here. If you manually manage music, you will need to access it as a regular folder on your computer. In iTunes, go to file > add file to library, and select individual files.

• During execution of the backup and maintenance on one of my computers, I noticed a folder and the file that I can't identify me...

  Original title: identity of unknown folder

  During execution of the backup and maintenance on one of my computers (Windows xp home, sp3), I noticed a folder and the file that I can't identify.  The name of the folder is cc68f6b7a7ca948eefb018f001 and the name of the update.exe file.  The properties of the file that it is a Windows Service Pack installation.  I tried Googling the name of the folder, but found nothing.

  Can you tell me with regard to this issue, and what, if anything, I have to do?

  Thank you.

  When some programs (including Windows) installs things, it can create a temporary folder composed of 20-30 random letters and numbers or random numbers and letters in the root of the drive of the volume with more free space.

  This explains why the records are sometimes on your C drive or any other drive - the most space?

  For example, you can see a similar to or called folder:

  D:\9470bb12e8a4f3447657236478e41c5

  There may be other folders and files in this main temporary folder such as amd64 and i386 platforms.

  They should normally be deleted when the installation is complete, but sometimes they are not - especially if the installation fails.  They are harmless but annoying.  You can think something is wrong when there are no or fear, that the files are really necessary.  To avoid confusion, you can delete the temporary files.

  If your installation has failed or the installation does not remove the folder to the random name when it finishes running again installation will be another folder at the random name.

  You may be able to identify installation (out of curiosity) by looking at some of the contents of the folder and decide if this installation was not serious, just remove the files/folders.  If the installation does not work for some reason, run again just installation will create a new temporary folder to the random name so the old temporary folder is really useless.

  Records are sometimes tough to remove.  Even if you are an administrator on the system, you might get a "sharing violation", "access denied", "used" or type similar message when you try to delete temporary folders.  Facilities sometimes use different permissions that can have a regular user with the administrator group.

  There are many methods to try to remove the folders, and some require third party programs to install or change some windows settings that could compromise the security of your system if you do not change them back when you're done.

  Start your system in Mode safe mode (by pressing the F8 key several times just before XP attempts to load) is one good method to try to remove the files because it does not have to make any changes to your system configuration or by downloading third-party programs.

  If you are running XP Home Edition, the following section on turn off "Simple file sharing" does not apply to you since in XP Home, Simple file sharing is always turned on.  If you are running XP Home Edition, skip the next few paragraphs and resume where it says:

  "If no part tool above work try a third popular called Unlocker.

  If Safe Mode does not work you can change the security of the folder when you start in Normal Mode to give your username full control over the files by navigating to it in Solution Explorer, click on tools, Folder Options, view and in the advanced settings window, uncheck (at the bottom of the list) use simple file sharing (recommended) and click OK.  This disables him recommended simple file sharing on your computer if you want to turn it back on when you're done to make everything you do.

  Right-click on the files of interest, click Properties and click the now visible security tab.  Change the properties, but you need (for example, select your user name, and check the box to allow full control), click OK to apply the changes.

  With usage share of active simple files (recommended) the checked the properties of the folder tabs are:

  General, sharing, customize

  With the use of sharing files simple disabled (recommended) box unchecked, the properties of the folder tabs are:

  General, security, customize

  Now, try to manipulate/delete the folder.

  It's a good idea to go back to the Explorer and the cheque in the box easy to use sharing files (recommended) when you have finished making everything you do.

  If none of the above works, try a popular third-party tool called Unlocker.

  Unlocker can be downloaded here:

  http://www.emptyloop.com/Unlocker/

  If you use Unlocker, be sure to install because he wants to add a bunch of options, addons, shortcuts and other extras that you don't need.

  You must add the shell extension so when you right click on the offending file, you will have a Unlocker option to choose.  I would just install it long enough to clean up the leftovers and then, I usually just uninstall and all parts of it.  You can always install it again another day if you like.

  Unlocker can be uninstalled when you have finished using it.

  Reboot when finished to ensure that boring records are really missing.

• My Contacts Windows Live is 452,1 MB and contains 16 files that extend into the size of 28.1 MB to 29.2 MB. Can one be deleted and if so, which?

  Contacts Windows Live is 452,1 MB

  I was sent here from the "Windows Live Solution Center" to ask my 'Q', below:

  My Contacts Windows Live is 452,1 MB and contains 16 files that extend into the size of 28.1 MB to 29.2 MB.
  Why so many large files containing essentially the same... Contacts?
  Do we really need 28 + MB to store contacts?
  Two of the files have been accessed today, while others have not been accessed for 6 days.
  Can one be deleted and if so, which?

  XPPro SP3 32 bit

  --
  happytilton®

  @happytilton®

  Since you are using Windows XP, your version of Windows Live Messenger be WLMsgr 2009.

  - so working in online mode (b) - Messenger requires a Live ID access code to use.

  The article I wrote and quoted above explained that WLM (Windows Live Mail), which is also applicable to the WLMsgr 2009 versions contain most of the information to determine what to remember as...

  1. how to use the registry to determine the names of digital files of the database of Contacts

  2A explained that 2009 has two functional databases for each Live ID (a primary and a shadow)

  -both are needed. used 2009 the 'shade' as a catchment area to ensure synchronization occurs in both directions, when changes are made in both locations (local in Messenger or online at contacts.live.com)

  Please read and understand the best article

  http://liveunplugged.WordPress.com/2011/02/04/Windows-Live-Mail-contacts-database/

  ... especially the section dedicated to explain the Contacts 2009 databases.

  Once you determine the digital records of your single Live ID database (shadow and primary) and the program created 'default' you can check the size of each. If you feel that your registry database shows other numeric names (created using other Live ID or perhaps due to an error by typing a user name in the Messenger sign-in box) and these folders can be deleted safely.  Note: you may need to configure Windows Explorer to show hidden and system files to see when viewing in Windows Explorer.

  In addition, you can also, as your contacts are stored online at contacts.live.com, after closing of Messenger remove the any local digital database called folders (for the primary shadow and if is the default). WLMsgr will recreate them on next signon and rebuild any local database folders and files based on what it sync (downloads) of the Live Server to contacts.live.com.

  -Before the deletion of all files, it would be wise to connect to contacts.live.com and check that all your contacts are indeed present and represent for and for saving documents to archives/purposes export contacts to a csv file using the web UI option... Once completed then disconnection from the web UI.

  -Do not, and I it cannot emphasize enough strongly, do not delete anything from the web interface before you delete the local databases on your hard drive (you can always return to contacts.live.com later to manage the contacts (remove, clean the unused or duplicates, merge duplicates etc.) if necessary after WLMsgr recreates local databases.)

  Once done your registry key should show that three databases total (assuming you are using only a Live ID in WLMsgr)-the main and shadow for that Live ID and a default value (if it is created by the program).

  You should have enough information to move forward or to ask additional questions.

  As I mentioned earlier that, at a minimum, an empty list of contacts would be at least some multiple approx. 24 MB. Since you use WLMsgr 2009, and it uses a primary and shadow, the minimum size of about for you with no contact would be approximately 72MB (24 MB for each - primary, shadow and by default). As well as the contacts are added, the primary databases and shadows will be size.

  Other topics presented in this thead element (but not significant) - comments below to close this loop

  S ' for the use of your Hotmail account in Outlook. This use is not related or significant to the database used by WLMsgr. Contacts in Outlook (when the mail is configured to use Pop3 or DeltaSync with Outlook Hotmail Connector) are stored in the Outlook profile contacts, and quite separate from the WLMsgr database (i.e. neither Outlook or WLMsgr program communicates or synchronize or share data with each other to keep the feature)

  FYI... not associated with 2009, but 2011 (for those who read along. WLM 2011 no longer uses the approach of two (primary and shadow) file for databases local contact so databases are smaller and also more robust in 2011 and better synchronize.  Finally, with respect to the use of 2009, wysiwyg... no other upgrades for 2009 are planned (the code was frozen for more than a year, the latest version (never) released in May 2010).

  Good luck.

  .. .Winston

  msft mvp mail

• Windows Explorer crashes when you open any folder with MPEG2 files.

  WinXP SP3 - When you open any folder with MPEG2 files, windows Explorer crashes. If the folder contains only the MPEG1 files, it opens without a problem. We first thought it was a problem of media player, but we can not even click on a file to open it in media player.

  Hi kathyd,.

  ·        You did changes to the computer before this problem started?

  Since we do not know what is causing this problem, I'd suggest unanimous the event viewer on your computer and check the details in the window logs messages/error codes important related to the question, during the time where this problem occurs and after return.

  Event logs can help you identify and diagnose the source of current system problems or help you predict potential system problems.

  Access the link below to learn how to view and manage the event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  You can try to start both computers in safe mode and check if it can open the folder where the MPEG 2 files are stored and if windows Explorer crashes. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  I hope this helps. Post back with the required information.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Computer continues to try to install the backup. He asked me to find a path to a folder containing the installation package 'SpareBackup.msi' I can't find it anywhere on my computer.

  SpareBackup.msi installation package

  Computer MT continues to try to run a backup. He asked me to find a path to a folder containing the installation package 'SpareBackup.msi' I can't find it anywhere on my computer. I keep getting is not available.

  Hello

  1. when exactly you get invites him to install SpareBackup.msi?

  Method 1:

  I recommend you perform the clean boot that this issue could be caused by some third party software.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  You can also download and run a full scan of the system using the Microsoft Safety Scanner and check if the problem is caused by a Virus/Malware.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• I have a folder containing all my music and he disappeared from itself

  original title: professional file missing on vista.

  I have a folder containing all my music and he disappeared himself. I can't find it anywhere on my computer. I use MS windows vista professional. Any suggestions would be greatly appreciated. Thank you.

  Nicole

  Hello

  You can try this program

  http://www.Piriform.com/Recuva