Computer has a black screen and does not start. Vista of Aspire5535 Acer base

Similar Questions

• Computer has a black screen and does not show the normal startup logo and more

  The computer that I use usually works well, until the next day, the day that I used it, ruined everything. My computer shows not the Windows 7 logo normal at startup, but instead, a bar with green lines in movement like the ones you see in older versions (Windows Vista), but now only the bar and did no logo in it and after starting does not display. It shows a completely black screen, but it makes a noise like the sound when she welcomes you to Windows 7. I tried safe mode and disabled the NVIDIA GeForce GT 220 graphics card and the screen works, but he is stuck at 800 x 600. In addition, the start screen is always the bar. How can I fix it? (Tried updating the gpu but still displayed black screen)

  Hello Rafael,.

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  This problem may occur because of corrupted display driver.

  I suggest to start your computer in safe mode, uninstall the display driver, restart your computer in normal mode

  mode and update driver from the website of the manufacturer of the computer display.

  Please see this link:
  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Important notes:
  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Windows load with black screen and does not start after windows updates

  Original title: load windows normally screen will not continue

  I went to my computer tower and I chose to install updates when closing.  I went back later to re - turn on my computer and now it loads to the top of the black screen that gives you 5 options. safe mode, safe mode with networking safe mode command prompt, windows loads normally and finally to load windows from last known configuration that works.  Problem is that none of these options work.  they all return me to the same screen.  Help this laptop came preloaded with Win XP Media Center edition and I can't get back to work.  IM assuming I need a XP disk support center but I can't find them anywhere! HELP PLEASE SOMEONE!

  Hi Burton089,

  Your hypothesis is right. To resolve this problem, we need to repair your installation of Windows using the Windows XP disk. We recommend that you contact the manufacturer of the laptop to check if they have the Windows recovery disk.
  See perform a repair Installation
  

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Qosmio G40 - black screen and does not start

  A bit of water on my laptop... (bought in 2007, guaranteed on)
  I did not cut power at the time because it did not work properly...

  But, the next morning.
  Start with a black screen, fan is too much work and I have a beep.
  An and after a continuous short beep...

  I opened it and dry all (air cold & mild)... paper to remove moisture.

  but screen remains black, a beep and the fan not working too.

  Please help... What can I do?

  Hey,.

  It seems that water damged your laptop or at least some parts. In the worst cases, you need a lot of new pieces of equipment, but I don't think that an authorized service provider can help you diagnose this problem.

  On the Toshiba site, you can search for them:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Contact them and ask for help. They will help you as much as possible. :)

• Satellite A135 black screen and does not start

  I have a Satellite A135 with windows vista and I have not used in more than a year.
  I went to use it today and it turns on but the screen is blank. I can't even see not the bios.

  I tried the usual things, connect to a monitor, removed the chip of ram from the back and tried another one, I also tried power alternative only with no luck.

  All the ideas it might be.

  Thanks for the help

  Hello

  If the BIOS page does not appear, then it s a serious question.
  Seems that the motherboard is dead.

  In my opinion, a technician should check this section first, and perhaps you will need a new

  Motherboards are parties, then perhaps it s not an option for you

• my computer has the power, but it does not start.

  my computer has the power, but it does not start. crancking for several minutes, after that it will quickly be able to record and then it starts again. Also, he asked once to restore to an earlier date that I did. He worked for a night, but come back to the same thing. Help!

  Hi moozer_890

  
  1 during how long have you had this problem?
  2. have you updated display drivers installed on the computer?

   

  Method 1 :
  To resolve the problem, you can see if the uninstall and reinstall then the display driver-
  Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  After the computer restarts, the drivers will be installed automatically.
  
  Method 2:

  If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site, then check.

  You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• My computer has a black screen and a cursor and there is no menu start more

  Original title: replay Vista operating system

  What I would like to know, is my computer only has a black screen and a cursor, there is no menu start, so I can stop and start a new installation of windows vista? If anyone can help please. I thank you very much for your time and have a fantastic day. Shawn

  Hello

  What changes have been made on your machine for there to be a black screen with a cursor?

  Rather than doing a clean install of your operating system, I suggest you do the following.

  Step 1:

  Remove all external devices (printer, USB flash drive), as appropriate, and start your computer again and check.

  Step 2:

  If this is little help, start your machine in safe mode and check if it starts on the desktop.

  Let us know the status of the issue.

  Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• MacBook Pro glued on the gray screen and does not start. Help, please!

  Hello

  My 13 "MacBook Pro (mid-2009), running Snow leopard (10.6.8), has finally given up and won't start.

  I tried to boot into SafeMode several times, but the loading bar does not move and the laptop just completely stops.

  I also tried to boot in single user mode with the command fsck - fy, but this results in the following:

  disk 0 s 2: I / 0 error

  Invalid node structure

  (4,35296)

  * The Macintosh HD volume could not be completely checked.

  / dev/rdiskOs2 (hfs)

  You leave with signal 8

  I guess that means that there is something wrong with the hard disk and some corrupt files?

  My problem is that I have no time machine backups, so I would like to know if it is possible to do something to get to the top and running.

  That, I do not have an external drive with my main important files and photos on a failure, so is it possible to completely erase the computer so I can sell it at least?

  I really need help on what I've been driving myself crazy trying to figure it out!

  I'm not all techniques with regard to the material. I tried doing research and have seen things, which suggests that I should reinstall the OS X, this would imply in the disks provided with the laptop when the power?

  Any advice greatly appreciated!

  Boot from the DVD and run the check/repair disk utility and repair permissions until you get no errors.  Reformat the hard disk using Disk Utility/Erase Mac OS extended (journaled), then click on the Option button and select GUID. Then re-install the operating system.

  When you restart, use Setup Wizard to restore your data.

• Satellite P200D - black screen and does not just by running

  Hello everyone, I have a Toshiba Satellite P200D - 107 PSPBLE with configuration set-aside:

  Processor: Turion x 2 TL - 52 64-bit clocked at 1.6 Ghz
  Display: 17.3 inch
  Graphics card: Ati radeon x 1200
  RAM: 2 x 512 MB ram (1 GB total) which I upgraded to 1 x 2000 MB and 1 x 512 MB (for a total of 2.5 GB)
  OS: FACTORY CD WINDOWS VISTA HOME PREMIUM 32-BIT
  Power: Running on the direct power without the battery cable

  Although the pc is quite old sound fundamentally new barely there 1 year of normal use on it.

  PROBLEM:

  The screen goes black (no), even if the screen still has the backlight running, the laptop is still under tension, but its basically in a kind of deep hibernation with the fan running yet.
  The laptop screen turns off 5-10 minutes after windows loads, even if in idle, it also stops during installation of the operating system.
  I tried to run the music and the music stops when the screen goes black made all the hard disk activity which I believe indicates that it is not related to the video chip.

  TRIED SO FAR:

  1. open up the computer laptop and cleaned all dust processor, now CPU temp is 50 max, even for hard disk
  2. update the bios to the original to 1.70 - did not help
  3 connected external monitor also stops it the same time as the laptop screen indicating it is not not a screen issue
  4 reinstall OS several times
  5 tested memory with memtest64 - no error
  6. test the hard drive with hddregenerator - no error

  What I've noticed:

  If I leave just a 512 MB of ram in the laptop then the laptop stops not at all even in windows applications, tried to launch a game to remove video card and it works without problem for hours, but as soon as I add the stick of 2 GB or another origianal 512 stick it will go inside the black screen 5-10 min (or earlier) to get into windows.

  He never stops in dos mode (as in memtest, hddregen) even with 2.5 GB of ram.

  After that the screen goes black, if I stopped and then try to save, it it won't work at all, the screen stays black with the fan spinning and boot CD, I must absolutely disconect the power cord power and re - set before it starts again.

  Anyone has any ideas, I am experienced with the pc, but have never stumbled upon something so weird that I have just can't explain this problem that came straight from heaven.

  Toshiba to wake up, this forum is a total joke, you would think that you would be able to afford hiring a bunch of technicians to actually help people rather than rely on the users of the forum to do your work for your, you don't need to have a forum, if you don't have the staff to actually help people solve their problems.

• My Apple Watch has a black screen and will not load.  I have it odd, but I can't seem to pair again.  Any ideas?

  My Apple Watch appears to be dead.  The watch screen is black.  I have not matched the watch and we tried pair again, but the iPhone doesn't seem to acknowledge that she and I can't manually pair either.  Any ideas on what's going on?

  Charge the watch first. Instructions here > check your battery and load your Apple Watch - Apple Support

  If necessary, restart the Apple Watch.

  You should force reboot your device as a last resort, and only if it does not. To force the restart your Apple Watch, press in and hold the side button and the digital Crown for at least 10 seconds, and then release both buttons when you see the Apple logo.

  Try the assistance provided in this support article > If your Apple Watch does not load, or it will not turn on - Apple Support

  And here > set up your Apple Watch - Apple Support

  Apple Watch user's Guide will be useful > https://help.apple.com/watch/

• Satellite A100 has a black screen and will not charge in the Bios

  I bought a Satellite A100 - (model psaa8c-0fh00e) about 5 months ago. It was left overnight, which is not uncommon, and when I came back using about 15 hours later it was just a black screen. moved from the touch screen and keys, and nothing did. so I cold it starts and he died. I then turned it back as usual and the laptop turns on but the screen is completely black. It's not loading the normal Toshiba Bios screen.

  Now my question: If there is any way I can solve this, I am familiar with computers and parts. I don't get this cause I've ever had to reflash the wood or something like that. I am unsure of how to activate and I really want to have to take it to a shop, any suggestions would be helpful.

  Thanks in advance.

  Hi Conrad,.

  If your 100 starts normally (spinning HARD drive, optical drive LED flashes, fans turn etc.) then I suppose that your FL inverter or LCD screen is not. You can check this by connecting an external monitor to the laptop to see if it shows the normal display.

  On the other hand if there is no activity at all portable computer turn when you turn it on then I guess you have an internal hardware failure, possibly the main card, which must be checked by a Service partner authorized Toshiba since the unit is still under warranty if it is only 5 months old.

  Kind regards

• Equium P300-19O - black screen and does not restart

  My Equium P300-19O had a blue screen of death after a few accidents occurred due to a broken Windows media player which 3 safe resets and then I get a blue screen of death.
  I restart the laptop, but now I have past the toshibia load up, but do not get further rather get a black screen with a dash flashing in the upper left corner.

  Please suggest anything that could help me get the laptop again.

  Hello

  Have you checked if you can boot into safe mode? You can try to start in safe mode if you go into the advanced boot menu by pressing F8 after you have switched on the laptop. Here you can choose.
  Maybe you can also try a system restore to a previous state.

  If it doesn t work it should boot from the recovery disk Toshiba and reinstalling Windows.

• Satellite L655D crashes on Windows startup screen and does not start

  Hi, I hope someone can help me.

  Portable Satellite L655D age of 18 months of my daughter began to hang on the black 'starting windows' screen, when it stays until it turns off after several minutes. I didn't spend this stage for several days, and the machine seems completely unusable.

  I then turn off by pressing the power button for a few seconds, I can then select F12 with the option to start in safe mode, but the laptop never makes it in safemode, it real just data on a screen black for a few seconds and then it crashes with the message "Please wait".

  Others that look, I'm not able to go beyond these screens.

  Any help would be appreciated.

  Thanks, Darren

  Hello

  Did you create a recovery disk?
  In this case, you could use this drive in order to reinstall windows on the laptop system.

  Another possibility is to drive HARD recovery. Press the power button, F8 and choose fix my computer. Now choose HARD drive recovery.

  I hope that you can do this

• my screen saver does not start. I select a screen saver, set the time, apply and nothing. This has happened before and corrected himself. Maybe one setting in another program? ___

  I select a screen saver, set the time, apply and nothing.  This has happened before and corrected himself.  Maybe one setting in another program? It's on a laptop.

  Hello jerrylumpe

  1. If you use an old mouse, try to clean it.

  2. you can have a running process in the background that keeps XP thinking that he is busy and so the screen standby does not start.
  Go to msconfig and uncheck everything you don't need, then see if the screensaver will kick in.

  Start/run and type
  Msconfig
  Ok

  Startup tab
  Keep the page open then click on the link below. It will tell you what are all the entries and see if you can disable them or not

  http://www.SysInfo.org/STARTUPINFO.html

  Read the key at the foot of the page, then click on "Here" at the top. Use the search box to check all your entries

  Try this too
  http://www.kellys-Korner-XP.com/xp_tweaks.htm

  Line 51 left side. Click on "toggle".

  It could be that something is resetting the timer. For example, it does take much vibration to move the mouse a little, and which will reset the timer to zero. Something like that would be possible? Or a pet that walks on the keyboard?

• Satellite Pro L450D black screen and will not respond to any keys

  Hello

  My niece has used his Toshiba L450D for almost a year now and he really liked it, who was until last month. She turned on her laptop and when she presses the button of the mouse, the button cracked and he fell into the laptop.

  Now my brother contacted Toshiba and I was told because it is under warranty it might return for repair because it was a common fault. Then he he packed in loads of air bubbles and a box to make sure it was safe.

  A few weeks later he came back repaired but we were all shocked that the laptop was put in a very loose box and you could hear this rattling noise. When we turned on the battery was flat and we had a new boot menu.

  As she installed it Windows 7 laptop would boot directly into Windows 7, but now after the repair of the laptop shows a menu black screen with as follows:

  + Windows 7 +.
  + Recover Windows to Factory Settings [active EMS] +.

  So we started in Windows and everything went well, but now after 5 or 10 or even 20 minutes, laptop displays a black screen and will not respond to keys or mouse movement. There is nothing on the screen its just black.

  I started in SafeMode (which was more difficult with the new menu) and it does the same thing. I even managed to do a virus scan quick who took 3-4 minutes and was clean.

  I would like some advice on what my niece is very angry, and it's difficult to explain what is happening to a child in the primary school.

  Any help would be grateful.

  Hello

  Have you tried the option of HARD drive recovery?

  If this is not the case, try to set the notebook back to factory settings using HARD drive recovery.
  Turn on the device, press F12, choose repair my computer, then select Toshiba HDD recovery.

  I hope it will work!