My drive E:\ DVD - RW not working do not.
Ran troubleshooting on the computer and it said "Disk in drive [E:] is not detected or is not supported" I did with several DVDs and the same thing. Before that, I did the system recovery. Other that consider best buy to fix ideas. Bought 10/17/2011
Hello
Leeks and glances at a Best Buy or any Big Box store, it would not be my choice for
a maintenance agent unless bought there and it was totally under warranty. Check with
The possible alternatives to center of serice system manufacturer's support.
==========================================================
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html
Then run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html
==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.
Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116
The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.
Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.
Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.
Forums - a lot of expert real help
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.
DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
Windows XP DVD with Windows Media Player problem
I have a Dell dimension3000 running Windows XP. I have an upgrade video card NVIDIA 8400 GS with memorey upgrade 2 g. I recently installed a DVD from ASUS drive, my DVD will not play on Windows media player plug-in but I bought the Corel DVD freeze and will not play. Is there a better plug-in or a solution to this problem?
Try to download the utility "Windows XP video decoder check utility.
It checks the ability of DVD to WMP encoder
-
After Windows Media Player 11 installation drive CD/DVD does not work
Hello
I installed WMP 11 via MS updated. The update done very well - but now the CD/DVD doesn't work. In "device management", the DVD is represented by a «!» I tried to update the device driver, but nothing has changed. Y at - it someone who has an idea?
Ralf
Hello Ralf
The optical disk drive is listed in Windows Explorer?
-
drive CD/dvd is not working
My cd/dvd drive does not work. The message I get is to insert a CD. Now after using Mr. Fix (from microsoft) I even see the drivers on my computer. What should I do?
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.
-
Driver CD/DVD does not recognize CD DVD and wants to get in shape if I double click on it
Hey all
I have a proplem with my CD/DVD driver. I insert a game and executing the autorun istead, it does nothing. I go to my computer (the icon of course) and instead of the icon of the game, it shows the icon of pilots and show the size of my game CD. I double click on the driver icon and it tells me to choose a name for the blank CD (that game). What is going on? He had once again and I had to format my laptop to make it work, but I want a more reliable solution
Hello
Be sure to run checkdisk as shown above.
---------------------------------------------------
Many files that SFC cannot resolve are not important.
Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN
put the command from below (copy and paste) in this box and her and then press ENTER.
findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt
who creates the sfcdetails.txt file in the folder that you are in when you run it.
So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
in Windows Vista
http://support.Microsoft.com/kb/928228This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
here. NOTE: there are probably duplicates so please only post once each section error.You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
(You may need to search sfcdetails.txt if it is not created in the default folders.)I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Drive CD/DVD is not recognized.
Original title: problems with ' Drive
Yesterday, Fix it Center has replaced the driver for my CD/DVD. It has worked perfectly for a few seconds and then 'frozen '.
After several attempts to restart it, I ended up doing a system restore, which (as you know) 'lost' the driver for it had "lead to new!
This morning I tried again to use Fix it Center, but get now an error code: 0 x 80092003.
Any help to this sorting will be appreciated.
Kind regards.Hello
Looks like the drive may be faulty, did you add that any CD or DVD of recent programs-
especially those that load at startup?Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Satelitte P850-132: optical drive read DVD but not CD
Hello
I have a P850-132 of Satellite of Toshiba (PSPKAE) with a Mat * one optical drive DVD-RAM UJ8B0.
I have the latest drivers for the optical drive installed (6.1.7601.17514).
Problem: Reads DVD very well, but cannot read the CD.
When you try to play a CD, the player makes a low clicking noise: ~ 4 quick clicks, then a second of silence, ~ 4 quick clicks... The player repeats this model by clicking silence/4 times, then goes silent. Nothing else happens.
The drive is defective? Is there an easy way to check if it is?
The pointers will be deeply appreciated :)
Hello
Looks like the laser lens is unable to read data from the CD.
Try to clean the lens of the laser using a fluid tip and alcohol of wadding.
In my case it helped to get the other disk works on my laptop. -
When I insert a DVD in my dvd writer, dvd starts but never gets recognized. If it stops running, it will display blank disc. Most of the time he keeps running and never stops. When I put the same dvd in my drive only dvd rom it works fine. This only happens when the burner.
-
I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.
Hello
1. do you get any error code or error message?
2. what day you installed recently?
It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.
Follow the steps to uninstall and re-install the drivers.
a. click on start toreduce this includes this im and then click Control Panel.
b. click system and Maintenance, click Systemand then click on Device Manager.
Note If Control Panel is in Classic view, double-click System, and then click Device Manager.Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.
c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.
d. When you are prompted to confirm that you want to remove the device, click OK.
e. restart the computer.
If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.
Hope the information is useful.
-
DVD drive don't read do not install DVD, burn CD work
So I guess it's a hardware problem with my DVD player. As mentioned in the title, it will not read the installation discs but burned CD is good.
-J' I tried to reboot the computer, it does not solve
-J' reinstalled the drivers for the DVD, do not solve
-Started the DVD in BIOS, didn't solve it
I have a M17x r3 laptop, Win 7 64, the DVD is HL-DT-ST DVDRWBD CA30N
Hi Pascalywood,
Test your drive using the Dell diagnostics. I describe the procedure in my guide for troubleshooting linked below. Make sure you put a DVD disc into the drive during the reading test.
-
Music CD and DVD do not work on satellite notebook
Hey people
I have a problem. I'm not very good with computers, but I know the basics. I have a Toshiba Equium with windows XP. It of my girlfriends, so when I got it was really slow with all its stuff student.
So I deleted everything and re-installed the computer to what it would have been when it is new, but now, nothing works. Music CD and DVD does not infact everything I put in the drive does not work. The orange light is on the cd player suggesting there is a CD player, but the computer is not picking it up.
Any ideas?
Thank you
Hello Klark
If the laptop is installed with the recovery media, there must be preinstalled WinDVD application and you should use it to watch original DVD movies. Have you already tested?
If you try to use original music CD try to boot with Windows media player. It should work. You can also install the latest version (v.11). What is with mp3 files? You hear mp3 files? Seems works well?
-
Satellite L670 - CDs and DVDs do not work smoothly
Hello!
I recently bought a Satellite L670 and there is a problem with the DVD player: CDs and DVDs do not work smoothly, there is a lot of audio and video clippings.
I uninstalled the driver for DVD drive and reboot the laptop, but it has not solved the problem.Could someone help me with this?
Greetings from France!
With cups, you mean peak and its gel for a second, right?
-
Lenovo Y430 - drive Optiarc DVD RW AD - 7640 S ATA Device dvd does not
Hi guys,.
My Lenovo Y430 - drive Optiarc DVD RW AD - 7640 S ATA Device dvd does not
Its not reading any cds/DVDs.
Please could you help me how to fix it
Once am put any DVD that the DVD is flashing and after a few seconds, his flashing no more.
Mine is under WIndows Vista SP2
I checked the CD-ROM/dvd-rom drivers in its 'active' display ' device working properly "Device Manager and registry also to 'upperclass' or 'lowerclass' settings entry just good.
Please someone help me how to solve this problem.
Thanks in advance.
Kind regards
Rambeau
++
@bjawasa is 90% out of material. Lenovo ask to change your dvd - rom with a new free of charge if you have the warranty.
You can call the help line: hindi or English speaking - 1800-3070-0010 (Toll-free) or 1800-113-324 (Toll-free)
-
CD/DVD RW drive bed but will not write...
I use Windows XP and use the disk drive: Optiarc DVD RW AD - 7530A. Under "Properties" is the State of the device "working properly" and he plays both CDs and DVDs. However, it will not write. I tried several software programs, including windows Media Player. When I right click on the driver, there is a recording tab.
The drive appears to work at first, but it can progress remains at 0% and the drive will continue as he does something, but it's not. If I try to cancel the burning using buttons in the software, nothing will happen. It will freeze my computer. The Task Manager will not work, and my only option is to keep the off button on the laptop until it dies. When I turn it back on, a small window pops up saying files are waiting to be transferred to disk, click on the bubble to continue (or something like that). If I click on it, then I see the blue screen of death and the computer shuts down.He also seems to have done something for my Explorer, it freezes too (I'm on Safari now)may be a full AV scan VIRUS.
-
Windows Movie Maker DVD will not play in my DVD of Emerson drive
Burned DVD won't play in my dvd player. I worked on it for three days. I burned a movie on a dvd + rw disc. The film will play on my computer but won't play in my dvd player. I get "Disk error" on the screen and the disc may not have playback function. What is the function of reading and how I can change my download? I lived all the concepts of self-help, but none of them fit to my problem. I have Windows Vista Premium and have tried using Windows DVD Maker. I called the manufacturer of my drive and they said I need to finalize the disc. How can I do to do this with Windows DVD MAKER? I read articles about video editing, but when I went through the steps that I wasn't even offered the possibility to publish the video. My brother uses the same discs when burning movies and I have no problem playing his films. What I am doing wrong?
Hi BrookeMcCulley,
Welcome to the Microsoft Answers community.
On some of the DVD player, you will not be able to play DVD + RW discs. You will need to use DVD + r (read DVD) drive and check if it works.
You can also try to use another brand of DVD disc and check.
For more information, visit the links below:
http://Windows.Microsoft.com/en-us/Windows-Vista/close-or-finalize-a-CD-or-DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions
http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings
http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc
Hope this information is useful.
Let me know if it worked.
Thank you, and in what concerns:
Umesh P - Microsoft Support
Maybe you are looking for
-
When I try to download a file (wpc) puzzles I get a page of unicode
I don't get the popup to download instead the page opens and everything is in unicode
-
Satellite L300-1FS: question on the compatibility of AC adptor
Hello I just bought a display model L300-1FS, discounted at 300 pounds, because the charger and all other materials are not present.The shop has replaced the charger with a realToshiba 19v 1. 58 has charger, but on the tech spec for this model amps o
-
EG1032 replaced my old network card, now I can't see my workgroup
Hi, someone helped me with a question WRT610n and it worked. But now, I replaced my stock with an EG1032 network card and have the same type of error. It has not changed the name of WORKING group and the other card has been disabled. Any ideas? Tha
-
What does "Channel status is not valid" message mean and how it can be solved.
Whenever I have upload documents, "ms security essentials" using any Explorer of the material are downloaded. But when I try to install it, its was not and I get a message "channel status is not valid". What this means and how it might be solved.
-
Open Source components for 8 7840 place?
When Dell will display the components open source for the update of the latest OS (5.0.2) for the 8 7840 venue? The update of the OS was available in early may, and now it has been almost two months without posting the kernel source and developer too