Satellite L300-1FS: question on the compatibility of AC adptor
Hello
I just bought a display model L300-1FS, discounted at 300 pounds, because the charger and all other materials are not present.
The shop has replaced the charger with a real
Toshiba 19v 1. 58 has charger, but on the tech spec for this model amps output should be 3. 95A...
This decline in the amps would be the cause of my intermittent load?
Laptop computer in charge, but every 10 seconds or if the loading icon stops and the Green led of hands lead shuts down, then flips back on again.
This could be low amps, or would be - this something else?
Thank you
Ron.
Hi mate
Generally, the value of intensity may be different. The value of the Volt is important.
It should be the same as the old power adapter.
However, the 1. 58A seems to me a little too low please check this new (don t mix this 100-240V (1. 58 (a).
I have two adapters; one with 4. 74 and the second with 3. 95A. 19V both and I can use both with my laptop.
Tags: Toshiba
Similar Questions
-
Satellite L300-1bw - Question on the removal of the HARD drive password
Hi, I own a L300-1bw, is seriously damaged (I'm going to scrap it) I had a HARD drive password to set.
Now, a friend has a C660 - 26G, which I hope to use to remove the password (which obviously I know).
Now, I plan to install in the C660 and go into the Bios to remove my HDD password, I will then put it it an external USB caddy.
Does anyone know if this is likely to work.
* Just to make it clear, it's my hard drive and I know that the password.*
Hello
I read in this thread that someone tried to remove the HARD drive password using a laptop from another manufacturer, and it did not work. But he managed to remove the HARD drive password using a Toshiba laptop.
Usually, the HARD drive password is stored and encrypted on the HARD drive therefore, theoretically, that it should be possible to delete a password KNOWN to the HARD drive using the C660.
So I would simply test it
-
After standby mode Satellite L300 cannot connect to the internet
Hello
I have problems with my Satellite L300, if I put the laptop to sleep it disconnects from the internet and when I try to continue later, he said that there are no wireless networks.
The only way I can connect again is to restart my laptop. Can someone help me please?Thank you
Hello!
I have a Satellite L300 too but I can t view such a question because I often use the Hibernate and the day before.
In any case, I think you should try to install the latest driver from the Toshiba site:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download driversBut before installing the new version, you must delete the old first and then reboot the laptop. After that, you can install the latest version.
And if it doesn't work, you must update the BIOS that you can find on the Toshiba site too.Good bye
-
Satellite L300 - icons moved to the left
All the icons on the function bar, Satellite L300, have moved to the left. Tried to bring back to his normal position with the mouse, but failed.
What can I do?Thank you
Hey Buddy,
Hmm... What icons tell you exactly? Do you mean the desktop icons?
If Yes, you can move them using drag and drop. That s pretty easy.By the way: what operating system you have?
-
Satellite L300-1FS - Wireless reconnect after closing the lid
Hello
My 2 month old son Toshiba laptop works very well in many ways, but an annoying problem, is that if we close the lid when you open it again it doesn't re connect to our router. If I click on the network connection, it just says: there is no everything!
Sometimes the switching market re wireless switch will connect there, but more often than not, it's a reboot, which is annoying.
Proves that the wireless card works but it would be nice to not have him harass me every time it does not connect.
All ideas welcome.
Hello
First a question: what exactly happens if you close the lid?
This laptop stops, or goes to stand-by or extended sleep?However, in your case, I would try to update the driver WLAN and the BIOS. Check the Toshiba website for updates:
http://EU.computers.Toshiba-Europe.com > support & downloads > download driversIt would be interesting to know what operating system you have and if you are running the factory settings or you have installed another OS?
A friend told Satellite L300 and he is very satisfied and can t notice any problem. :)
-
Satellite Pro M70: Question on the port on the left hand side
Another question regarding the Pro M70 PSM75E, next to the hard drive (left side) there is a port which you can take off. I took it of and it looks like a chip grafx or something: s someone with the M70 not what it is.
Thanks again
Hello
Well, there are of many Satellite Pro M70. It s a great series.
But for example Satellite Pro M70-110 has a PCMCIA Type II slot.
You can use the different PCMICA card in this slot. But they must be compatible.
I guess this slot machine, you found a plastic Board. This is only for security.However, if you want to learn more about your device, I would recommend reading the user manual which must be preinstalled on your laptop. You will find very, very, very ;) useful information.
-
Satellite L300 - how to accept the Tempro privacy policy?
Hello
My utility to update version 1.x Tempro on Vista was working fine, until I did the Tempro v2.2 upgrade and now it is stuck: it says "waiting for confidentiality to be accepted. I click on 'View and accept' and a new privacy policy Tempro window opens and I click on accept
Then a DOS window opens - TemproLanucher.exe - but it just gets stuck it (white) and will eventually close to return to the first screen "in expectation of confidentiality is agreed" again.Someone knows it please any way out of this loop?
The firewall of windows Vista SP2, Satellite L300, (off does not help), no anitvirus, also I did the upgrade of the proposed too BIOSThank you very much!
John (UK)Hello
Everything works well, read this thread
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=54945&TSTART=0
-
Satellite L300. Observation on the issues cover the recovery of Vista on a new HARD drive
Hi all
I need to reinstall Vista (on a Toshiba Satellite L300) runs the "recovery disc" created by Toshiba disc creator before recovery and using a disc of "nine" (Toshiba MK2035GSS, 200 GB).
Issues related to the:
(1) I have to partition and format the new drive before starting with recovery disks / DVD (s).
or which will be done through the recovery process?(2) what is the reason for which the current disc is divided into two size equal C: and D: partitions, while
D: partition seems to be reservered for the system, but only 5 GB are used?(3) what is the purpose of the partition 3. ("inactive") with about 1.5 GB of space?
Thanks in advance for your support and help!
Whalter
> 1) I have to partition and format the new drive before starting with recovery disks / DVD (s).
or which will be done through the recovery process?
No, because the HARD disk should be formatted during the recovery process.(> 2) what is the reason for which the current disc is divided into two size equal partitions C: and D:, while
D: partition seems to be reservered for the system, but only 5 GB are used?
On the D partition, you can find the files and folder from HARD drive recovery. HARD disk recovery allows you to recover the laptop HARD drive and in this case, you don't need the recovery disc(> 3) what is the purpose of the partition 3. ("inactive") with about 1.5 GB of space?
It is a Vista partition and is necessary for the backup files. Vista is able to repair the operating system if something bad is going to do this the necessary files that are stored on this partition. -
Satellite L300 - recovery ends with the error message: 10-FA1Z - 045D
My Satellite L300 is 3 months old and one a few days ago I resorted to the use of the 4 recovery DVDs.
After several hours, I get an error: 10-FA1Z - 045D message. I made 3 attempts and get the same message every time.Any suggestions?
My only suggestion for that is you should contact the closest service provider authorized as soon as possible. I am not sure what can be the problem, but it must be HARD drive issue or a problem with the recovery image.
In both cases, you will get free and if necessary service service can order new DVD of facilities of recovery for you.
Do not wait too long and vase your time with her. Call the nearest service tomorrow and talk to them. -
Can satellite L300-1AQ - I use the L300D recovery disk?
My son has a Satellite L300-1AQ equipped of vista. All of a sudden will load is more the laptop and automatic repair options fails too. There is a blue screen that appears, but only for a second when I try the repair option - then the laptop stops. We have no recovery disks.
Also, I have a laptop Satellite L300D-13 s that works well and suppose I could get a drive recovery- but prob diff drivers etc.
Can someone advise me how best to my sons laptop (Im not concerned about retrieving data as all saved already), but do not want to return to the factory settings including Vista. Do not know if using a laptop recovery disk is an option - instinctively is not as ever as simple as that.
All advice welcome please.
Hi mate,
I can t imagine that the Satellite L300D recovery disc will work on Satellite L300. The hardware platform is different, because a single machine is equipped with Intel CPU and the other with AMD processor, so there's a big difference.
In addition, in the worst case, it could be a hardware problem and in this case the recovery disk does not work
What can you do now? I think you have to options: either you install Vista from a disk of Microsoft or order you a Toshiba Recovery disk: https://backupmedia.toshiba.eu/landing.aspx
After installing the Microsoft disc, you can download all the drivers on the Toshiba site. Then you will also get back to factory settings, but it takes more time in the recovery disk because it contains an image which already all the drivers and tools are included/installed.
I hope I could help a bit. :)
-
Satellite L300 will not charge the battery
I have a new battery and I tried my old battery and another charger but my Satellite L300 load will always be not.
If I unplug it then plug the charger back in it appear to be responsible for about 20 seconds.Can someone help pleas
Hello
If you have tried different batteries and new AC adapter and the battery still wouldn't load, then I would say; This s hardware problem of the motherboard.
I think that there is no much do the defective part needs to be replacedI think that the ASP must verify the material, you know
It of the best way to get the issue resolved. -
Satellite L300-1AQ freeze on the Welcome window
Hello
Can anyone help please. I have a satellite L300-1AQ
the problem I have is:
It was working OK. One day the next it would freeze on the Welcome window.
The only way I could get it to start was F8 safe mode.
And then it would freeze once a few minutes done repair my computer and Toshiba HDD recovery now it starts without going into safe mode but it still freezer a few minutes.I also tried swapping the ram from this laptop. with that out of a friends, I always freeze
Thank you
MBOS vista Home premium 6.0.6001 service Pack1
Processor inter (R) Core 2 duo CPU T5800 @ 2.00ghz
2048 MB RAM> the only way I could get it at startup has been F 8 then mode.then course it would freeze after a few minutes did fix my computer and Toshiba HDD recovery
As I see it, * Toshiba Hdd recovery * does not solve your problem. You checked with the other memory, but it always freeze. so, I guess that a hard drive can be a troublemaker. If your laptop is still under warranty, you should contact them (SAV)
-
Satellite L300-14O - cannot find the internal mic
Please I can't find my microphone in my Satellite l300-14
Hello
Satellite L300-140O was equipped with the internal webcam and microphone belongs to the webcam.
The small hole must be visible close to the lens of the webcam.Check it!
-
Satellite L300 Wireless icon has the Cross Red but connected - SOLUTION
Satellite L300. Home Premium Windows 7 32.
Updated the wireless driver Atheros to the download area of Toshiba (the newest driver released on 11/27/11). After the reboot, the icon in the notification area wireless shows with red cross through it even if it is connected. Not a big deal but annoying.
Corrected by:
(Note: you must take note of your routers WEP key before doing this and if SSID is not it broadcasts)1. go on the network and sharing Center
2. click on manage networks wireless on the left-hand menu
3. highlight your connection and remove it.
4. stop and restart the network connections service (to go to the Services console right-click on computer in the start menu and click on manage.) Expand Services and Applications, click Services).
5. reconnect to your network by choosing from the list of available and entering the WEP key (or use him manually add... option if you must enter the SSID).
6. If still the same then restart and reconnect to your network.Worked for me.
Alternatively you can try of course to roll back to the old driver.
Thank you much for sharing this info with us!
Perhaps, it might be useful to other people here in the forum!Great post!
-
Re: Satellite L300 - 22 X - improve the Sims 3 game
Hi Eveyone,
I need help to know how I can improve games on my laptop for Sims 3 etc. If it is possible? I'm sorry, I'm not very technical. My laptop specs are as follows:
TOSHIBA Satellite L300-22 X
Part number: PSLB8E-0PS007ENMain features
-Intel® Celeron® Processor T1600
-Genuine Windows® Vista® Home Premium 32-bit (pre-installed, Toshiba-HDD recovery)
-DVD - RW SuperMulti drive (Double Layer)
-2048 MB (1024 + 1024) DDR RAM (800 MHz)
-15.4 "Widescreen TruBrite® XGA (1280 x 800) High Brightness displayAlso, if you think this laptop is good enough for the games, could you please give me any recommendations for a good (but not too expensive) :)
I'd appreciate any help.
Thank you
Hey,.
What you want to improve exactly?
As you probably know Satellite L300 is not one that is suitable for the games because the graphics isn't one model high-end. Satellite, Qosmio series and P have the best graphics cards and faster processors, so if you are looking for a new notebook, take a look at these models.
What you can to improve the game performance are updated the display driver and DirectX version. Disable all programs that you don't need before you start the game like antivirus, firewall, Skype, etc.
If it doesn't help to try to reduce the details of the game and test a lower screen resolution.
Maybe you are looking for
-
The Tablet/mouse scroll function does not work for the other tabs when a PDF file is opened.
-
Hello friends, In the past, you have helped me a lot! Please, I'm reading the variables in a txt file attached. Variables appear between the lines 5187 to 5236 (49 lines). Below the threshold of 5241 to 5290 (49 lines). After the same variables of th
-
Decimal display problem number ASCII
Having a weird problem with a pilot Plug-and-Play for the Keysight/Agilent/HP 8510 C. There is a driver of VI (joint) called «Output Active Marker.vi» The problem I have with this VI is that it works great my marker value between 9.9999 and - 9.99
-
NMI:Parity error blue screen
I have problem with blue screen with any program at any time. It is as it should be a hardware problem. When I run the Diagnostics on my computer everything seems to check out OK.
-
HP PhotoSmart D110 - Wireless work not at all
I can't believe it! I bought a PhotoSmart D110 and it worked fine for 3 months. Now, I'm very frustraded. Whenever I need to print something from any of my computers at home wireless, I need to put the printer off, wait a few minutes and turn again.