My drive Local (c) cannot be defrag. Help, please!

Similar Questions

• Palm M515 - Windows Xp - cannot HotSync! Help, please

  Well, I'm going to this for a few hours because I received my used Palm m515 and cannot get it to HotSync with my computer. Someone at - it a step by step how to sync it? I get an error message on my palm, saying that it can not connect and I have to configure my settings. I tried to switch to palm desktop and it says that my Com1 port is not open? Any suggestions?

  The first thing you should do when a part receiving device is Hard Reset to turn the unit to the factory settings and erase all their information. When the device's HotSync ' ed, a hotysnch user name is applied to the device. If you do not use the same username in Palm Desktop, when you synchronize, it won't recognize the user name and cause problems HotSync ' ing.

  Click on the following link for the Web page of kb.hpwebos.com for the article about resetting your device.

  http://KB.hpwebos.com/wps/portal/KB/common/article/887_en.html

  Once the device is hard reset. Start the HotSync process and configure the user name that you want to use in Palm Desktop.

  Here's an article about hotsync troubleshooting. See if it helps.

  Click on the following link for the Web page of kb.hpwebos.com for the article about HotSync troubleshooting: start here.
  
  http://KB.hpwebos.com/wps/portal/KB2/common/article/2630

  For troubleshooting XP: HotSync under Windows XP (part one)

  http://KB.hpwebos.com/wps/portal/KB/common/article/28618_en.html

  For reference purposes, click the following link to the support page for your device on the kb.hpwebos.com Web page.
  
  http://KB.hpwebos.com/wps/portal/KB/common/article/47831_en.html#M515

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

• New portable printer HP2540/301 Acer Aspire 1 has no disk drive and a silly user. Help, please...

  I bought myself a nice 5240 again 301 printer all-in-on Wednesday.

  Since then, I have made that fight with him since then.

  My laptop is an Acer Aspire one, one of the smallest, which unfortunately doesn't have a hard drive in it. My first thought went to download drivers. The web page did not work and I realized then, that, without the user manual (which I think is on the disc), I'm totally lost.

  If someone could please help me.

  I made an impression that says.

  Check your network printer name HP (SSID) corresponds exactly to your router (SSID) wireless network name.

  If they do not exactly match, run set up the printer software to set up your HP printer wireless.

  I guess that's the software on the drive. Is it possible to download the software online?

  Any help would be accepted with gratitude that I have no idea what I'm doing atm. I just starting to learn how to properly use Windows 8 atm, so far my computer all skills hass been how to open a browser and an office.

  Thank you.

  I would add also, I downloaded the application too, but which does not recognize that there is a printer at all.

  Hi, here is the link for the driver.

  Link to the user guide.

• "Please insert a disc into drive I" error message problem. Help, please!

  I get the error message "Please insert a disc in the drive I" when I try to attach a drive external hard (in a case of hard disk) via a USB 2.0 to my Dell Dimension 8400 computer. I am running Windows XP Prorfessional.

  When I attach an external hard drive that comes with its own enclosure as a Western Digital MyBook via the same cable USB 2.0 the following happens. Windows Explorer shows the new disks I and J. If I try to open the drive I have, I get the "Please insert a disc into drive I"message.» However, when I try to open the drive J I'm able to do it and see the files, in this case, the Western Digital MyBook. I can also open these files.

  I searched the Internet for solutions to this problem. In some cases, the problem can be solved by renaming the drive letter, but this does not work in my case. Most of the sites I visited fail to provide a solution. Very many missions I've read on various sites, the problem seems to be related to error messages has Microsoft Windows. The solution would seem to have to disable this / these messages by changing the relevant parts of the registry. (See: http://answers.microsoft.com/en-us/windows/forum/windows_7-system/logonuiexe-no-disk-there-is-no-disk-in-the-drive/7a158e14-6a56-4bfd-b1b5-796c3ccea3b0?page=2&tm=1341781513552, http://www.w7forums.com/please-insert-disc-into-drive-error-t11264p2.html, http://support.microsoft.com/kb/281345)

  Unfortunately, the information that I found are too vague and contradictory to me. Microsoft seems to suggest changing the value of ErrorMode in CurrentControlSet so that the user gets more no error message 'hard' (modification of the: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows\ErrorMode value = 2). However, this suggestion for the backup of SQL Server databases. It also seems a bit drastic to turn off hardware error messages. In another post the suggestion is to delete upper and lower filters in the section of the registry that controls the hard drive. The problem here is that you may have to reload the software. Also, I'm afraid I'll mess up the registry.

  I would be grateful to anyone who could tell me what parts of the need to register to edit and how to disable this message ' Please insert a disc in the drive I have. "

  I suspect that the boxes of hard drive that does not open professional XP are somehow corrupt. Unfortunately, the error message keeps me from use any diagnostic software to examine the hard drives in these speakers. In this regard, I would be grateful to anyone who might suggest a diagnosis good freeware hard drive.

  I thank the members of the forum for their help in advance.

  I really appreciate all help members can give me.

  1, the diagnostic software that youre looking for WDC, is a MS-DOS

  utility. Download from WDC, installed on an MS-DOS formatted disk, pc boot

  on disk, it automatically runs... With respect to the current problem, try to go to run, type:

  diskmgmt.msc

  MSC, locate the hd, L.click on this subject, go to actions, all, select 'enable ',.

  close the msc...

  You can also, type: cmd in run, type cmd: DiskPart in DiskPart, type:

  The type of disk list: list volume type: HELP for cmds all the...

• Im not getting sound and I don't know what driver I need to download. Help please!

  I installed the drivers provided with my motherboard and all that usually works with windows xp... IM always receives no sound.

  Do anyone know how I can find this driver, I need and where I can download it as soon as I know?

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  It will be useful.

• Solitaire: error "your drive could not be partitioned. Help, please

  Hey, solitaire

  After recovering disk space, I tried to run BCA. I used a 64 bit Win10 .iso downloaded from Microsoft. BCA created the installation disk, downloaded media files and allowed me to choose my size of the partition (same split) on my merger of 3 TB drive. Then I got the error.

  I have reset the SMC

  Rest PRAM

  None of the external devices are connected.

  I repaired the drive in disk utility, and restarted in single-user mode and made a repair of the AF - / sbin/fsck.

  Also, I started in safe mode to try BCA from there, but he couldn't find the Win installation disc, even if disk utility could find it.

  Here is my list of current diskutil:

  

  Cs diskutil list

  

  This is my current research on the problem brought me. I remember seeing a bunch of odd discs added to diskutil when it is run in repair mode. There were about ten of them. I don't know if they were repaired during the previous process.

  Ideas? Thank you!

  As you test, use utility disk to create a FAT of 1 partition to or more and check the result of diskutil disk1 and sudo fdisk/dev/disk1 list and check if it works. If so, you can always delete the partition and use wizard BC.

• Cannot sign out of Hotmail, on either my laptop or my partner. Had the problem for 6 to 8 weeks. Deleting cookies does not cure it. Computer store cannot heal. Help please!

  I have Windows XP on a laptop.

  For 6-8 weeks, I have not been able to sign out of Hotmail. He said: I signed up for MSN account but not hotmail. Try to delete cookies. It does not work. I don't think it's my laptop at fault because the same thing happens when I use my partner's cell phone, but it does not happen on his Hotmail. My friendly computer shop started by giving my laptop a good clean and have since scrubbed off the coast and reloaded. The problem is still there.

  Can you help me, please?

  Hello

  ·         What happens when you try to sign out of hotmail?

  ·         Does happen only with hotmail account or other accounts as well?

  ·         What web browser you use to access hotmail?

  If you use Internet Explorer, I suggest you follow the steps mentioned below:

  Method 1:

  Disable Add-ons and check if the problem persists. Follow the steps in the link:

  http://support.Microsoft.com/kb/883256

  Method 2:

  If the steps above to reset the Internet Explorer settings and check if the problem persists. Follow the steps in the link:

  http://support.Microsoft.com/kb/923737

  Disclaimer reset Internet explorer:

  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  You can also post your request in the hotmail forum. Please visit the link below to find a community that will support what ask you:

  http://windowslivehelp.com/forums.aspx?ProductID=1

• I am not able to find a reliable 64-bit driver for Magicolor 2300 dl. Help, please.

  Unable to find a 64 bit drier for my printer

  Konica Minolta said that the printer is not compatible with the 64 bit version of Windows.

  I would contact them to see if they have the intention to produce a correct driver.

  http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Konica%20Minolta%20Magicolor%202300DL%20Laser%20Printer&v=Konica%20Minolta&uid=5250208100&l=en-US&pf=0&pi=0&s=Konica%20Minolta%20%20magicolor%202300%20dl&os=64-bit

• Crashing CC2015 first each time. Cannot open. Help, please!

  My iMac Running Yosemite 10.10.5 2012 will open NOT first CC. I just worked today on a project on the CS6 and had no problems. Wanted to go to the public, followed all the instructions for installation, and whenever I try to open the cloud it crashes and gives me a terrible long string of mumbo.

  I uninstalled the machine CS6. Installed and uninstalled the cloud. Restarted my computer twice. Whenever I get a message that says "Adobe Premiere Pro CC 2015 close unexpectedly"

  Any suggestions of how I can get the logon request.

  Thank you!

  Lauryn

  Steve,

  Thank you, but I just got the phone with the help of Adobe and they were able to help out me.

• cannot cancel! Help, please

  Hello. I can not Cancel after that I hit ctrl + m and make my really annoying composition.its. Why is it happening? Please help if you know the solution.

  The undo stack is purged before the render through the render queue to clear the memory for a maximum speed of rendering. If you go back, you can return to one of your autosaved projects or your incremental backups.

• Cannot find any Acquisition of Image Windows service in services.msc. Cannot scan. Help please

  Hello. I just bought my deskjet 1050 all-in-one. Everything works fine but the scanner does not work. What seems to me, is that the question is in the HP scan. When I try to open it, it does not open. I then searched Windows Image Acquisition in services.msc, but there was none of this services listed there, I think that this is the cause of this problem. How can I solve this problem? How can I reinstall WIA?  I have win 7 Home premium 64-bit. Have installed the full version of the software updated, but of no use.

  Thanks be to God. I found the solution. I restored the registry entry in the registry editor. It is somewhat like "stiscv" in the registry.

• I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help

  I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help, please.  Thank you!

  Hello golden2,.

  I understand that you have a DVD picture in your SuperDrive drive, but it is not mount on the desktop and will not eject.

  Please, try the procedure described in this article using the disc is ejected.

  Get help with the SuperDrive slot on your Mac - Apple Support loading

  Do not eject discs or discs eject slowly

  1. If the drive ejects discs slowly or appears to have difficulty, insert and eject a disc several times. Check the disc to see if it has a label or other material stuck to the disc which increases the thickness. Remove the label if possible.
  2. If the disc does not eject, try pressing the eject on the keyboard button. Some older keyboards may use the F12 key to eject the disc.
  3. If the disc does not eject, try dragging the icon of the disk to the trash.
  4. If the disc will still not eject, try to hold down the mouse or trackpad button after you restart the computer. The Superdrive should attempt to eject the disc.
  5. If the disc still does not eject, reset the System Management Controller (SMC) and repeat steps 1 to 4.
  6. If the disc still does not eject, Contact Apple or an provider of services authorized Apple, or make an appointment with a Store Apple Store for further assistance.

  Take care.

• I am refurbishing a Pavillion m7560n and I can't find a driver for the local network. Can you help me? CC = en

  I am refurbishing a Pavillion m7560n and I can't find a driver for the local network. Can you help me?

  Here is the link to the LAN of your system drivers:

  http://ftp.HP.com/pub/softlib/Software7/COL15134/ob-40490-1/sp26744.exe

• have an error on my computer - Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt... local profile, what should I do please help

  have an error on my computer - Windows cannot load the locally stored profile.  Possible causes of this error include insufficient security rights or a corrupt... local profile, what should I do please help.

  Hi MelbaIsaiah,

  I suggest you to follow the steps in the article and check if it helps.

  Error message "Windows cannot load your profile because it may be corrupted" when you try to log on Windows XP

  http://support.Microsoft.com/kb/318011

  I hope this helps.

• When you try to launch Lightroom 5cc message Lightroom cannot create a catalogue to local disk. cannot save changes to this place. any help please

  When I try to open Lightroom 5cc on my pc I get the message "Lightroom cannot create a catalog name of the catalog Lightroom 5 volume disk Local C because Lightroom can't save the changes to this place" I just upgraded to Windows 10 and worked fine on windows 7. Any help please?

  Hi bill.hughes3,

  Can you make sure that the images on your local disk folder has full read and write permissions and then try to create the catalog?