My computer is no longer warn me entry stop when the battery reaches the critical level.

Similar Questions

• Explorer.exe stops when the computer is shut down

  Explorer.exe stops when the computer is shut down

  Hi DickKimberley,

  ·         What exactly happens when you try to shut down the computer?

  ·         You receive an error message error code?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check.

  Advanced Troubleshooting for shutdown problems in Windows XP

  http://support.Microsoft.com/kb/308029

   

  Method 2: If the method above doesn't follow the article mentioned below.

   

  Windows stops responding during Windows XP shut down

  http://support.Microsoft.com/kb/307274

  Let us know if that helps.

• Windows takes time to stop when the computer is turned off

  has had to reload xp without windows takes a long time to stop

  Hello

  Welcome to the Microsoft community!

  You re - install Windows XP and still have the same problem?

  During the shutdown of the Windows XP computer, it may take longer time to complete the shutdown process. Slow stops are caused a lot of factors. One of the causes is the clear pagefile at shutdown option enabled.

  Try the following steps:

  Use the Group Policy Editor

  a. Click Start, run and type in "Secpol.msc".
  b. click local policies | Security options.
  (c) in the right pane, set stop: clear the pagefile of virtual memory for people with reduced mobility.

  However, this setting is not the only cause of slow closures. No relevant programs and Services also contribute to slow closures.

  If the problem is seen recently after installing a driver software or third-party, try a system restore to see if that solves the problem of the slow stop.

  How to restore Windows XP to the previous step: http://support.microsoft.com/kb/306084

  I hope that helps!

  If you need further assistance on this issue or any related issue of Windows in the future please let us know.

• Computer stops when the wireless switch is turned on

  I have a Toshiba Satellite M-35 S456 with Windows XP Home Edition.  When I turn on the switch on the bottom of my laptop wireless, the screen flashes blue with a message and then stops.  The computer tries to restart, but during the process of the blue screen flashes again and it stops.  If I switch the switch wireless to the computer will restart.  I am trying to connect to the internet via a router which is already set up and running.  All solutions?

  Hi MartinLaMarr,

  ·         What is the Blue error screen that you are talking about?

  ·         If so, have you noticed the blue screen error message?

  Check to see if the following is useful.

  Method 1: Unplug non-essential devices from the computer and restart the computer.

  Method 2: Try to select disable automatic system failure reboot since the options of start menu advanced to know the Blue error screen.

  a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  b. use the arrows to choose to turn off the automatic restart in the event of system failure in the Advanced Options of Windows Start Menu and press ENTER.

  Method 3: Updated with the latest wireless drivers and other drivers of devices from the portable computer. Log in the Web of Toshiba site to do.

  Content Page Model - Toshiba Satellite M-35 S456

• Windows Defender will stop when the computer starts

  Windows Defender goes off when the computer is started and occasionally when the computer is running. I bring up the Control Panel icon, click on restart and restart the program. I had this problem for a week but have not added new software for a fortnight. Everything ran happily until a week ago. I am running Windows Vista Home Basic on a Packard Bell Imedia 3312 UK computer, purchased in April 2009

  Are you by chance using AVG 9.0 for your antivirus package? This version of AVG 9 automatically extinguished Windows Defender. Microsoft® Security MVP, 2004-2009

• HP Pavilion x 2: computer hp laptop pavilion x 2 works only when the Tablet is removed from the keyboard

  Hello

  My 3 year old hp pavilion x 2 removable 2 in 1 touch screen works only if detached from the keyboard.  It has been for the last couple momths stop without warning whenever it was moved slightly while attached to the keyboard. Now it doesn't work at all and stops as soon as I connect it to the keyboard. Everything else works fine. Any help is appreciated. Thank you.

  Pat

  Hello @pmm25,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post about the problem of keyboard and wanted to help you!

  Given that the question seems to be hardware related, you can consider contacting the HP support by phone for additional options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• No warning when the volume level

  Hello

  I just bought my Xperia Z2 a week ago and I am completely satisfied with the phone. Just one thing that bothers me is that, until now, it will display the warning when rasining top music volume level using earphones, but today it suddenly stopped showing this warning. I'm still using the headphones supplied with the phone, and I have not changed any setting for her nor disabled somehow.

  Something might be wrong with my headphones? Like them being does not correctly detected or something. I don't know if it's my imagination or not, but since the warning stopped the sound quality seems to have gone down.

  In the end, I did the factory reset and that seems to have solved the problem.

• My computer is connected to a router via ethernet but my wifi stops when the computer goes to sleep. How can I stop this?

  I just installed the router today.  Wifi a works fine until the computer goes to sleep, then my wifi for my Ipad, nook etc off.  This should not be the case.  Why would he do that?

  Hello

  1. have there been recent changes to the system before the show?

  2 is the issue limited to Wi - Fi?

  Method:

  Follow these steps and check if that helps.

  (a) click Start, type Device Manager in the search box.

  (b) click on Device Manager , according to the results.

  (c) expand the wireless adapter, right click on the drivers listed.

  (d) click on Properties, click on the power management tab.

  (e) uncheck the option allows the computer to turn off this device to save power.

  (f) click apply, click OK.

  Let us know if it helps!

• Computer stops when the power to the computer to sleep, on computer virus problem

  Hello

  When I put my pc sleep and wake him up, a window pops up saying that the machine has stopped unexpectedly, and then the pc automatically reboots by itself,.

  after reboot, a window box comes in saying that the pc rebooted one... and that Windows will inform me what to do.  What happened yesterday and today.

  I must say however that Friday evening, August 24, my pc was slow work, since a few days I noticed, but Friday it was slower, I could see that something

  moving in often via the little blue wheel icon that shows that something is happening.

  I "had" McAfee Total Protection in my machine since 08/05/2012 and last night I clicked on the McAfee to do a full Scan of my pc, because I thought there was something fishy in it.  McAfee Full Scan clicked, a blue page with white letters arrived, quick and deep that I saw Dump numbers going up to 100, then the blue screen came out and restarted my PC.  After reboot a small box of Windows came to say that the machine had stop unexpectedly, he

  has run a control bar, when in fact something like 'your stop machine unexpectedly and windows will inform you what to do', something like that.  I then

  new click the McAfee icon, click the full sweep, the same thing happens again anywhere.

  Then, I went to the website of McAfee and talkative with Technical Support, he came into my pc to see for himself, he opened the Navigation button and had IP

  address to which McAfee was 'downtime '.  He told me I had a virus in my computer... He gave me a phone # to call for assistance in the removal of the virus. I called, the man

  did not come into my PC to see, he said, I had to pay $89. something taken him. I closed with him, went with the customer, aksed for my refund...

  sad situation, but I withdrew my PC with McAfee.

  I've downloaded Malwarebytes, checked my PC had 2 Trojan horses, you click on Remove to remove the.  Still had Malwarebytes in pc, I went to Trend Micro, which I had before in my pc for years and renewed my Sub. with them and has installed. After doing a full Scan, no virus.

  I made a 'machine checking if' work properly AM early this morning.

  This afternoon, August 25. I opened my pc, the audit began, time + after pc restarted normally, then all of a sudden the blue window came with white letters, dump numbers went up to 100 then pc rebooted, Windows little box came "... unexpected" and normal ran pc after.  Worked a bit on the pc then place to sleep so I could go somewhere, when I clicked on the mouse to wake up, as I always do in the pc, it awakened, blue page with while that the lettering came, took place on the same things as above.  PC ran good, had to go eat, put the pc to sleep, came back same thing occurred again

  I searched what happens and found nothing.  I went to the community, there nothing either.  So I'm here today to help hoping that you know what is happening.

  Thank you for your time and your help.

  Bebb

  Hello

  Currently, you have a program full-time antivirus installed on the computer?

  If you do not have one, I suggest you to install Microsoft Security Essentials.  Follow this link to download.
  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  Follow these methods.

  Method 1: Run a Scanner online from Microsoft.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  Method 2: To remove the virus manually, see the article:

  How to remove a computer virus?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Important: The Troubleshooting Manual in the link above steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• Firefox no longer accepts my master password when the browser is launched.

  When I run firefox it normally ask my master password. That's fine, I put a master password for me, but now when I go to enter it and press OK nothing happens. I have to hit Cancel at the prompt for a master password for the browser to launch. Then if I change the password that it accepts my password and I am now "connected" to the password database. I can repeat this process each time I restart the browser.

  Reset my master password with this method does not resolve the problem. Once I put a master password, yet once I have the same problem as before. The password that appears when Firefox is started does not accept my password.

  Edit: I have it solved. An add-on using the master password should be put back.

• I have a chess program that I would like to transfer (copy) to another computer. How can I download a CD when the program is too large for the CD?

  The CD can usually take 700 MB, and the chess program is much bigger.

  Use a DVD, they will hold 4.7 GB.  However, it probably won't work... you will probably need get the installation package.

• Computer crashes with blue with "BUGCODE_USB_DRIVER" error screen when the computer is in hibernation.

  Original title: blue screen Crash to Hibernation

  Hello

  My laptop had been for some time and the fan started making a very loud noise, in that there is no generally when the machine is cold, so I decided to Hibernate for awhile. Then, I got the blue screen and a crash report, and I have no idea what this means, or how serious it is. Help, please?
  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 4105

  More information about the problem:

  BCCode: fe

  BCP1: 00000008

  BCP2: 00000006

  BCP3: 00000001

  BCP4: 86CFE988

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Files helping to describe the problem:

  C:\WINDOWS\Minidump\Mini022012-01.dmp

  C:\Users\Nick\AppData\Local\Temp\WER-192910-0.SysData.XML

  C:\Users\Nick\AppData\Local\Temp\WERBEBC.tmp.version.txt
  The blue screen, I saw something BUGCODE_USB_DRIVER.
  Thanks for your help!

  The minidump file showed a BUGCODE_USB_DRIVER (fe) error caused by the stop usbhub.sys:

  BUCKET_ID: 0xFE_usbhub! UsbhTrapFatalTimeout_x9f + 28

  The usbhub.sys (by default the USB hub driver) is a Windows system file, but it is quite possible the problem is a third-party driver or hardware related.

  What I would say, is to update the wireless driver by installing the next update:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-62508-1&CC=US&DLC=en&LC=en&os=2093&Product=3652100&sw_lang=

  You can also benefit from the update all the drivers available from HP for laptop:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3652100

  I would also, at least temporarily, uninstall Daemon Tools as his driver, the dtsoftbus01.sys, has been known to cause problems in some configurations.

  You also have to install the following hotfix that should update the USB stack:

  http://support.Microsoft.com/kb/2547549

  If the problem persists can provide you with the files minidump resulting.

• computer Vista laptop does not stop when the lid is closed

  I have all the correct power settings. mode when the lid is closed, I tried setting Hibernate and sleep. It just keeps running and running, I'm afraid it will overheat. but it should stop when the lid is closed, correct? Thank you sissy

  Hello banditpunpun2,

  Thanks for the return of the response.  I also go to your manufactures website and confirm you are updated with the lates drivers, updates the firmware and BIOS.  I even watch the forums on the manufacturer's Web site to see if others have experinced the same question.

  Please let us know status.

• Will be that the download stops when the computer goes into sleep mode?

  Will download, install, or all these action stops when the laptop goes to sleep.

  MK

  Yes, it will be.

• Screen of the blackBerry Smartphone is no longer automatically stop when the phone is not used

  I have a Verizon 8830.  I have the side switch programmed to lock the device.  In the past, when I blocked the device, the screen would turn off after 2 seconds, which would save battery.  Now, when I lock it, the display turns off after two seconds but then it turns back on.

  I can get it to decrease intensity with backlight settings, but I can't have to go completely dark.  As far as I know, I have not changed any settings.

  Any ideas?

  It fixed the old-fashioned way... I did a hard reset.  It works again.