My effect after installation problem!

Similar Questions

• After effects after installation error

  Hello

  I have some problems with my trial version of after-effects on Windows 7 (64-bit).

  After Installation in the creative cloud, I tried to launch the program, but this error pops up:

  "After effects error < 5476 > < GPUManager > < 2 > Sniffer result Code: 3.

  Restart the computer and new installation of AE, impossible to remove this error.

  My system:

  Operating system: Windows 7 Home Premium 64-bit

  Processor: Intel Core i7 - 4790 K CPU @ 4.00 GHz (8 CPUs), ~4.0GHz

  Memory: 14336 MB of RAM

  Card name: AMD Radeon 200 Series R9

  I will update the drivers GPU now, maybe this will help.

  I hope that everyone has a sollution for my problems, because I need them and wanted to buy PS, Illustrator, and AE for my studies.

  Greetings

  This occurs generally when the operating system does not meet the minimum requirements of the system. Do you have Windows 7 Service Pack 1 installed?

• after effects cc installation problems.

  Hi I am trying to install this app on my mac. I get this error message. Please, I close the PS, but I can't close the others in the activity window because I can't find them there. Any ideas please. I have a top of the retina of mac laptop display range.

  Thanks in advance.

  

  Restart your computer and try again.

• Startup after installation problem

  Hi all
  I try to install Oracle XE 10 Linux, everything seems ok in the installation, when I go to set [/etc/init.d/oracle-xe set] it crashes:
  --------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Want that Oracle Database 10g Express Edition to be started on boot (y/n) [y]: y
  
  From Oracle Net listener... Fact
  Configuring database...
  --------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  I checked the data files on the folder [/ usr/lib/oracle/xe/oradata/XE] and it is empty.
  I uninstalled as stated in the documentation and re - install but no luck.
  
  Could someone help please.
  Thank you

  is it relevant

  Could be. Any process oracle running after uninstall? ($ ps - ef | egrep oracle)

  You get / have libaio and glibc packages? (RPM? $ rpm - qa | egrep "libaio |") glibc')

• After the effect cc 2015.3 update installation problem

  I can't install the effect after update cc 2015.3, showing an error after a movement during its installation. This time I saw a solution on the adobe page to uninstall and install again, but now it is not at all set up, I am facing this problem since the morning, also the installation offline link does not work, I can't download it from the link. Please someone help me of this *.

  After 50% of the download, I renamed the file named '1.0' to ' 1.0.old - 1 ' in the C:\Users\[UserName]\AppData\Local\Adobe\AAMUpdater directory and then I clicked retry and the download and installation is complete.

• Problem with the installation of effective after

  Hello, I wanted to install a trial version of effect after cs6 and cc, but when installing: installing me messages "installation failed" and it is written in the summary of the error -1 fatal Error (s), 0 FATAL error (s): payload ' Photoshop Camera Raw 7 {deleted} 9.0.0.60 ' information not found in Media_db. "What is that someone can use thanks in advance and I hope I was clear enough.

  [NEVER SEND A SERIAL NUMBER IN AN OPEN FORUM.]

  [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  Do you see a code in summary of this output message? We ask you to troubleshoot Adobe Creative Suite install problems with log files

• Is After Effects CS5.5 only PowerPC? (Installation problem)

  I just installed Adobe Creative Suite Production Premium 5.5 on a new (2012) Mac Mini (Intel Core i7 processor) running OS X Lion mountain 10.8.2.  Most of the applications installed correctly, but After Effects CS5.5 gives me the following error when I try to launch:

  Cannot open the application "Adobe After Effects CS5.5" because the PowerPC applications are no longer supported.

  I tried to uninstall and reinstall the app (with Flash Catalyst, which also fails), but the error remains. What is the problem here? Is it an installation problem or After Effects CS5.5 is really not compatible with my new hardware/operating system?  Any suggestion is appreciated.

  OK, answered my own question.  I was installing on a Mac Mini, which does not have an optical drive, so I used a remote optical drive to install on my network.  It turns out that confuses the installer.  I finished copying the DVD to install it on a flash drive and the installation of one.  Problem disappeared.

• Problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  Am having problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  * original title - I'm having a problem *.

  You have the latest drivers?
  http://www.nvidia.com/page/support.html

  Aero - Windows 7 - How to troubleshoot problems with Aero

  (1) first of all, click on the Start button and type in Aero. Now, click on find and fix problems with transparency and other Visual effects of link.

  (2) a new Wizard dialog box opens. Make sure that you click Advanced to solve all problems automatically.

  (3) either the problem will be solved or not. If this isn't the case, you will get a list of items that are potential problems.

  (4) If you want to see more details about the problem, you can click View detailed information. This will give you a list of potential problems that have been verified and those that pose problems.

  If it does not---> click Start---> right click computer---> click Properties

  Click the link for 'Windows performance index' and then click 'rerun the assessment"to refresh your WEI score and try again.

  Note: If you have Windows 7 Starter, or if your system does not meet the requirements for Aero you will not be able to use Aero.

• Boot problem after installation of Linux Mandrake 10

  Hello!
  I installed Mandrake 10 on my computer toshiba tecra S1 laptop.
  But after installation and restart, the laptop stops in sequence starting with the toshiba logo.

  I tried the F12 key to select the boot device, but it does not work.

  If you have a solution to this problem please tell me.

  Thanks in advance.

  Hello

  It is not easy to tell what the problem may be, but it is possible that the boot manager not properly installed.

• Problem after installation of the uniblue registry booster

  After installation, I started to make a request to make changes to this computer to yahoo and google bars of tools, then adobe who, most or all it's demand for the flash player to make changes to this computer. to do this, these pop-up windows asking constantly especially when change page or just read a. the toolbaars can ask once, but takes three clicks to accept the order, adobe flash player allow takes 5 clicks stops and then restarts and continues until I shud turn off the PC. Can anyone help?

  Hello

  Firstly uninstall the UniBlue - Panel configuration-programs and features or check with
  UnIBlue support for uninstallation methods.

  ----------------

  Then use the system restore BEFORE you uninstalled UniBlue which will ensure
  None of this is left in effect on the system.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  I hope this helps.

• Dual monitor boot problem with Windows 7 Professional 64 bit after installation of any graphics program like a game.

  I have built this platform with the help of the owner of a store of 4 cumputer teir 2 years ago. We initially put Windows Vista 32 bit on the system to Vista 64 bit unstable atm. For 2 years, the computer worked like a dream. Last week I made a clean wipe of windows vista and windows 7 professional 64-bit installed. The system has two monitors. The primary monitor is a sony bravia with 26 "led and secondary for watching movies is that a 55 '' led Samsung 1080 p 240 Hz. The graphics card is a geforce GTX 295 nividia. It has 12 GB of Ram and the CPU is an i7 965 @3.20.

  The problem I have is this. After the installation of any game average to work with windows 7, the screens to reset their resolutions automatically more than a few times as they are confused. Sometimes, I have to return the screen to its correct resolution after installation in full. Most of the games and then run fine. After installing the game or any game designed for win 7 startup of computers is all messed up for the monitors. After starting hand 26 "sets its resolution and then after about a second 30 pause the computer makes the sound (the double) that it is resolutuons to reset monitor again? After that this second reset about 1-2 minutes the computer is good to go, unless it sets the res evil. The problem is the computer has never done that with vista and it is very annoying say the least. It still freezes the installation of some games. The only way to resolve what I found is the restoration of the system. The computer starts normally and screen ground is defined once she has always been. The only problem is when you install another game, the problem is their new. This problem is worse in some games.

  The latest nvidia drivers have been installed. There is no conflict in the device with the exception of an old printer Manager. The two comes is set to 60 hertz. I searched all over the internet and there seems to be a problem with windows 7 without solution. I am at a loss. Any other information that you need let me know and I'll post it. Thank you!

  Hi ancientone618,

  It sounds almost as if there is a Windows update that is in conflict with your NVIDIA Driver Installer.  I would say to disable automatic updates of Windows to see if it might help:

  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  In addition, please see the article with some useful information:

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Had problems with Windows 8 Pro that I bought after the pre version, seems when I tried to reinstall it, kept getting no configure after installation.

  Had problems with Windows 8 Pro that I bought after the pre version, seems when I tried to reinstall it, kept getting no configure after installation.  So I tried a full install without success.  Can you please give some tips to overcome this problem?  I lost the back upward with the resettlement, don't know how, but I have a QuadCore intel 9650 memory of 8 GB, 560 GTX GPU, 120 GB SSD.  Can I install windows 7 ultimate, but I prefer Windows 8 Pro and don't want to pay for it again.

  I suggest you reinstall Windows 7 first, then use your existing Windows 8 Pro key and reinstall Windows 8 Pro from the following link:

  You can download it from there and use your product key to upgrade:

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  You will need to reactivate by phone:

  Activation of the phone:

  1. press the Windows key + X , and then click run, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Installation of elements of problems. I always get the info to download the Advisor after installation

  Version of 64-bit items downloaded 4times, installed a desinstallion delete all including the time adobe in the registry. I have alwas get the info to download the Advisor after installation! I have the file on my desktop, but nothing else!

  Hi gerhards34108030,

  I'm sorry that you are having a frustrating installation. You receive the prompt to download the Advisor because a previously installed Adobe app has been incorrectly removed. You can use the Adobe Creative Cloud cleaning tool to resolve installation problems.

  If this does not resolve your problem, we need additional information to solve problems. What is your operating system and which version of elements are you installing? This is Photoshop or Premiere elements?

  Best,

  Del

• Problem connecting after installation ODBC10g

  Hello
  Oracle client is installed on our server under Oracle_ClientHome10g (client1). I wrote a c# application to connect DB and get data. Since my server no ODBC, I installed ODBC10202... I got from Oracle's web site. She created new customer, Oracle_ODBCHOME2 (customer, 2)
  After installation, I could connect to SQLPLUS db. However I could not connect to ODBC Data (DNS) Source admin. I noticed that I had several oracle, client1 and clinent2 paths, in the path Envirnment. I removed the path of customer 1. Still no luck.
  Then I remove the path to client 2 and replace the path to client1. Now SQLPLUS and ODBC Datasource (DNS) work correctly.
  
  However my c# application does not work. I get the following error.
  Oracle. DataAccess.Client.OracleException ORA-12154: TNS: could not resolve the connect identifier specified in the Oracle.DataAccess.Client.OracleException.HandleErrorHelper
  
  I have the right TNS in the Notwork/Admin folder.
  How can I fix without removing the 1 customer?

  Hi Thasan,

  "
  When I run my application, I get the following error:
  Oracle. DataAccess.Client.OracleException ORA-12154: TNS: could not resolve the connect identifier specified in the Oracle.DataAccess.Client.OracleException.HandleErrorHelper
  ..
  How can I solve this problem?
  "

  If you have 10.2.0.1.0 customer (from ODAC) on a 64-bit win platform then I would suggest that you apply the patch 10.2. 0.3.0 or later version. It's to solve a known problem of net described in
  Note 334528.1 ORA-12154 or ORA-6413 running Oracle 32-bit on Windows 64 - bit OS software
  (available to see in support.oracle.com)

  "
  What is the different bettween ODTwithODAC1020221.exe and the ODAC1020221.exe?
  "
  The ODT version contains the Oracle Developer for Visual studio tools. Apart from this they
  must be the same.

  "
  What I need to change no matter what registry once I installed ODAC1020221? I read somewhere years ago that we had to change some registry and correct the value of program File (x 86) to something if we install ODAC 32 bit on 64 bit server. Impossible to find this post again.
  Please help me solve this problem
  "
  I'm not aware of any manual registry changes after installation.

  If this does not help then I probably suggested to do a reinstall and using the ODAC 11.1 client
  as it is the last and should not have the TNS problem you describe.

• My seagate drive external drive keeps ejecting properly after installation of OS El Capitan

  My seagate external hard drive keeps ejecting properly after installation of OS El Capitan, it locks also towards the top and turns off, the ext drive when using, I have to restart my IMac 27 inches.  I have two ext hd who does very well for years before the installation of the operating system El Capitan

  If you have installed the Seagate Software, please delete and see if there is no change.

  Any third party software that is not installed on the App Store or by drag-and - drop in the Applications folder and uninstall by drag - move to the trash, is a modification of the system.

  Whenever you delete changes to the system, they must be eliminated completely, and the only way to do this is to use the uninstall tool, if any, provided by the developers, or follow their instructions. If the software has been removed incompletely, you may redownload or reinstall even to finish the job.

  I never install modifications of the system myself, and except as stated in this comment, I do not know how to uninstall them. You'll have to do your own research to find this information.

  Here are some general guidelines to help you get started. Suppose you want to remove the so-called "BrickMyMac" (a hypothetical example). First of all, menu using the product, check if there is one, for instructions. Not finding here, look at the Web site, let's say www.brickmymac.com. (Maybe it's not the name real site, if necessary, search the Web for the name of the product). If you don't find anything on the Web site or in your search, contact the developer. While you are waiting for a response, download BrickMyMac.dmg and open it. There may be a request here as "Uninstall BrickMyMac." If this is not the case, open "BrickMyMac.pkg" and look for an uninstall button. The uninstall program can also accessible by clicking on the button customize, when one exists.

  Back up all data before making any changes.

  Generally, you will need to restart the computer in order to perform an uninstall. Until you do this, there may be no effect, or the unpredictable effects.

  If you can't remove the software in any other way, you will have to erase and install OS X. Never install any third party software, unless you're sure you know how to uninstall in the contrary case, it can create problems which are very difficult to solve.

  Try to remove the complex system of changes by hunting for files by name, often will not work and can make the problem worse. The same goes for 'utilities' as the 'AppCleaner"designed to remove software.