my entire desktop display is moved upward and the top part has been moved to the bottom of the screen

Similar Questions

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• wireless multimedia keyboard Microsoft 1.1 on my desktop using Vista home premium and the keys are coming all wrong

  I have a multimedia keyboard 1.1 microsoft wireless on my desktop using Vista Home premium, and the keys are all coming up badly, when I type 'k' for example I get 'a' or if I type 'p' I get 'v' and give me space '9' someone can tell me how to solve this problem?

  Hi Winchesterdream,

  Welcome to the Microsoft answers community site.

  I suggest you try the following steps

  Step 1: Connect the keyboard to a different computer. If the keyboard works correctly on another computer, the port to which the keyboard was connected on the original computer may be damaged. If this is the case, contact your computer manufacturer to find out how to repair or replace the damaged port.

  Step 2: Download and install the latest keyboard software

  To download the latest drivers for the keyboard that you use, see the following Microsoft hardware Web site:

  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  Step 3: Press the SHIFT key to turn five times keys Stick On or Off and check if the problem persists.

  Let me know if it works. Good luck!

  Hope it will be useful.

  Thank you and best regards,

  KKS Vijay

• When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Problem in BBM blackBerry Smartphones - I do not have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel

  I don't have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel. Help, please!

  Thank you!

  Then you can try upgrading the BBM to the latest version available for your device?

  Make that first make a local backup of your BBM contacts, after backup, delete or uninstall any existing version of your BlackBerry. On your home screen, go to Options > Advance Options > application > BlackBerry Messenger > delete BlackBerry Messenger of this list (highlight BBM press on the menu key and select delete)

  KB10040 : How to view or delete the application installed on a blackberry smartphone 

  Once it is perform a battery pull reboot by removing the battery while your unit is powered, wait a min, then reinsert back.

  Finally, after the reboot, use your BlackBerry browser and go to www.blackberry.com/bbmdownload and download the latest available for your device.

  _______________________________________________

  Please note :

  If you encounter BBM7 or higher then your BBM Contacts are integrated into your BlackBerry ID after installation when you log in with your BlackBerry ID Contacts is restored back, but if you experience any previous Kathy then first make a backup local, you can save on your press card, see this KB for additional assistance

  KB20554 : How to back up and restore the BlackBerry Messenger contacts list

• Error 404-not found? Although services are upward and the gaze of password security very well.

  Installed Enterprise Edition on the server, error 404-not found? Although services are upward and the gaze of password security very well.

  Thanks in advance,

  What URL are you trying to access?

  for em-->http://localhost:7001 / em

  to get answers-->http://localhost:9704 / Analytics

  Unless you change them.

• I install the new cc2014 update, but for some reason any in my computer displays double former app and the new, but the new dose did not setup that I have in my old version! What will happen?

  I install the new cc2014 update, but for some reason any in my computer displays double former app and the new, but the new dose did not setup that I have in my old version! What will happen?

  Thanks, I have solved this problem, simply delete the old and manually I have brand new!

• HP Envy 15 "touch screen power LED appears, but the fans does not and the screen does not light

  Hello!

  I'm a student in computer engineering at the University of Waterloo 1A, and I run a very serious problem with my HP Envy 15 "TouchSmart laptop computer running Windows 8.1. It is a problem that just started today, and I'd rather have a first support here before going to see the technical support Office sometimes tomorrow. It has to do with the screen and the fans where the Power LED lights in white, just as when the laptop works properly.

  (I have warranty on the laptop when it was purchased last June, except that if I find that I need to get a replacement, I'll lose all my work, I did on that since I started my semester.) It's so silly of me not to have all my work saved on a backup, because I have an external hard drive. Problem is, I've had too many problems in getting myself organized, I'm not being open-minded as I should, and worse, I'm not a balance between life and work at home.)

  Before I had my MATH 117 conference (Calculus 1 Engineering), I was in a nearby lab where my laptop was open and turned, works correctly. I've had NetBeans IDE running since I wanted to work on the second part of my current assignment of CS 137 (principles of programming). Because it was almost time for my presentation, I closed the laptop by simply moving the screen down on the keyboard, where it goes into mode 'sleep'. (Whenever I flip to the top of the screen, the laptop is supposed to return, and the sliding screen of Windows 8.1 connection will appear.)

  When I took my seat for reading, I wanted to spend a little time to work on my programming assignment. However, after the reversal of the screen to the top, instead of having the login screen appears, I encountered the problem: the power supply light is showing a white light, but I don't hear the fans between the ventilation openings on the left side of the laptop and the screen does not light. I tried to take the power for several seconds and once button at least 10 seconds, except that the power light continues to display on a white light. The Commission of the Wi - Fi light is not displayed.

  Whatever it is, I don't want to take out the battery because I have that on my last laptop, and it's from there that I couldn't turn to the former, a new market. If I leave the Envy laptop battery, it will short-circuit the connections between the battery and the computer, and so several components will FRY. For now, what I do let the laptop is to empty the load on the battery. Then, once I noticed that the power light does not project a white light, or plug in the AC adapter and try turning the laptop on the power button.

  It will take a little while for the circuit drain the load on my battery but...

  Anyway, please would you be kind enough to help me with this problem? I would really appreciate if you can give me several recommendations. Thank you!

  Hello @GregPDesWHP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is not on, and I'd be happy to help you in this case!

  In order to restore the features of your computer once more, I recommend you follow the steps described in this document on the computer does not (Windows 8). If the problem persists after having exhausted all the steps in this document, I recommend you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• Satellite L405D-11V - freezes and the screen goes black when you watch the video

  OK, so I have the Toshiba Satellite L405D-11V, I had a breakdown, basically, the computer freezes at any time and the screen would go black, with the fan and lights still ongoing, this could be at the start, or a few hours using the laptop, so I decided to ring Toshiba technology support and they arranged for my laptop to collect and be expelled for repairs.

  I was able to track repairs online via the tracking service and was able to see what they were doing to my laptop, he said that they have ordered a part, it was underway and the repairs are completed.

  However, I got the laptop back today, I turn it on, all right, I start using the cell phone that everything is fine, so I decide to watch a video on youtube, and it freezes again, so I turned off now pressed the power button, hoping he wasn't that a large, I turn back to and load the video once again it freezes and the screen goes black again, after that whenever I am watching a video or a game, it causes the computer to crash and freeze as before the repairs. So there is always a mistake, but I'm not sure what to do

  Its still under warranty, I bought the laptop from the Comet, but I really don't want to send the laptop for repairs again and find it comes back with the same fault, is it interesting sending distributed, maybe see if the comet will replace the laptop as its still less than a year to buy the laptop, or it'll just be useful to save all the hassle and buy a new laptop? If this fault happened to someone else, I could use you some help, and if someone could shed some light regarding what could be bad?

  Thank you

  Hey Buddy,

  You changed something on the configuration after you got your notebook back from repair? You update a driver, or something else?
  What operating system you use on your L405D satellite?

  To be honest it is really hard to say why it happens because technicians test to check if your laptop is running correctly.

  In my opinion you should try to update the display driver. Maybe it's the origin of the problem of s
  If this isn't the case, I recommend installing Windows from Toshiba Recovery disk to restore to factory settings. These parameters are pre-tested by Toshiba and should work.

  If you still have the problem, you must contact the technicians again. I mean you could track the online repair and according to your assignment, everything worked well during repair, so in my opinion he should t be a problem to contact guys exactly.
  Explain your very detailed problem. I think that everything can be clarified then. :)

• Equium A20 fell and the screen turns off always

  Hi, I was using my satellite A20 long (4 years). Never had any problems. Recently he fell and the screen turns off always.

  I can see the toshiba logo and the windows logo also when starting, and even I can enter the BIOS and change the boot order too... but as soon as windows load screen is black. I don't understand

  Anyone with the solution?

  Thanks in advance...

  Hello

  > but as soon as windows load screen is black. I can t understand
  This means that the display output has accidentally changed to an external.

  Have you checked if something would be visible on the second external monitor?
  Select this check box.

  In addition I advise to use the FN + F5 keys to check if you can switch the output back to the internal display.

• Re: NB200 - making noise and the screen turns white

  Hello

  My laptop makes the high pitched noise and the screen turns white. Please help with this question.

  Thank you

  Hello

  It is especially as this problem with the inverter. She is, die, and made a noise of pitch. Try to connect the external monitor and check if it is displayed.

  Welcome them

• just got a new lenovo y50 and the screen does not come

  Hello.. I had a y50 lenovo a day ago. I loaded and when I turned it on the custom screen shows something... it won't turn... Only the lights on the keyboard upwards
  Thank you

  thx for your help... .but I guessed it was a connection problem... so when I opened, I find that the cable between the motherboard and the screen was loose... then it worked, I saw the language and region settings

• My dell Inspiron 1150 windows xp password son has locked and the screen will not change, we do not know the password or have we not the reset disk, how can connect to reset password

  My dell Inspiron 1150 windows xp password son has locked and the screen displays the dell logo and says that I need the master password or administrator, my son can't remember and we do not have the reset disk, is it possible to get and reset the password or enter the system

  If you are using XP Home Edition, the built-in Administrator account probably doesn't have a defined password. You can start in safe mode, where this account will be selectable when connecting. It allows to connect and change the password of your normal connection.

  To start in safe mode, keep hitting F8 twice a second after turning on the PC until you get the start menu where safe mode is selectable by the up/down arrow keys, and then press ENTER.

  If you are using XP Professional, try to connect using the built-in Administrator account. You don't need to do it in safe mode (although you can if you wish). If your normal login screen is a display of the user symbol and hit ctrl-alt-del twice to get to login to text entry. Type administrator as the user name and try a blank password.

  See also http://support.microsoft.com/kb/321305

  Tricky

• having two monitors and somehow a shortcut has been programmed

  Hello, I have two monitors and somehow a shortcut has been programmed, when I click on the button 1 what ever I'm working on the switches to the other monitor. When I click on the number 2 key it puts the window at the first monitor. Is it possible to disable this option? Thank you

  Hello, Kaarne,

  Right click on desktop

  Select the Graphics Options in the menu

  Select quick access keys

  Select Disable

• Computer is humming, fan turns on and the screen is blank when I start computer

  This problem happens every 90 days. When I took the computer to the repair shop, he had no problem with him right there.  If the computer remains stationary, the problem persists, but once it is moved in a certain way, it will start normally. Specifically, I spilled on the computer and the problem stopped.  I have a hard time to explain a problem to the repair shop when it no longer exists at the time wherever I have it get there. Is there a more permanent solution that mess up the computer?

  When I tried to turn on my computer, I get a buzzing sound, then the fan came and the screen remained blank.  I tried to restart after an hour, but it's the same, what's the problem? >

  Hello DempseyBullock,

  Sorry, you experience this problem.  The first thing I would say is contact the manufacturer of your computer.  Also, I suggest to go to the manufacturer's Web site to confirm that there is no news updates for the drivers, firmware, or BIOS updates.

  If you are unable to start your Windows XP-based computer, try the steps in the below links:

  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Thank you

  James